hi3660.h

/*
 * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
 *
 * SPDX-License-Identifier: BSD-3-Clause
 */
#ifndef HI3660_H
#define HI3660_H

#include <hi3660_crg.h>
#include <hi3660_hkadc.h>
#include <hi3660_mem_map.h>

#define ASP_CFG_REG_BASE		0xE804E000

#define ASP_CFG_MMBUF_CTRL_REG		(ASP_CFG_REG_BASE + 0x148)

#define LP_RAM_BASE			0xFFF50000

#define SCTRL_REG_BASE			0xFFF0A000

#define SCTRL_CONTROL_REG		(SCTRL_REG_BASE + 0x000)
#define SCTRL_CONTROL_SYS_MODE(x)	(((x) & 0xf) << 3)
#define SCTRL_CONTROL_SYS_MODE_NORMAL	((1 << 2) << 3)
#define SCTRL_CONTROL_SYS_MODE_SLOW	((1 << 1) << 3)
#define SCTRL_CONTROL_SYS_MODE_MASK	(0xf << 3)
#define SCTRL_CONTROL_MODE_CTRL_NORMAL	(1 << 2)
#define SCTRL_CONTROL_MODE_CTRL_SLOW	(1 << 1)
#define SCTRL_CONTROL_MODE_CTRL_MASK	0x7

#define SCTRL_SCSYSSTAT_REG		(SCTRL_REG_BASE + 0x004)

#define SCTRL_DEEPSLEEPED_REG		(SCTRL_REG_BASE + 0x008)
#define SCTRL_EFUSE_USB_MASK		(1 << 30)
#define SCTRL_EFUSE_USB_PLL		(1 << 30)
#define SCTRL_EFUSE_USB_ABB		(0 << 30)
#define SCTRL_EFUSE_UFS_MASK		(3 << 6)
#define SCTRL_EFUSE_UFS_PLL		(1 << 6)
#define SCTRL_EFUSE_UFS_ABB		(0 << 6)

#define SCTRL_SCISOEN_REG		(SCTRL_REG_BASE + 0x040)
#define SCTRL_SCISODIS_REG		(SCTRL_REG_BASE + 0x044)
#define SCISO_MMBUFISO			(1 << 3)

#define SCTRL_SCPWREN_REG		(SCTRL_REG_BASE + 0x060)
#define SCPWREN_MMBUFPWREN		(1 << 3)

#define SCTRL_PLL_CTRL0_REG		(SCTRL_REG_BASE + 0x100)
#define SCTRL_PLL0_POSTDIV2(x)		(((x) & 0x7) << 23)
#define SCTRL_PLL0_POSTDIV1(x)		(((x) & 0x7) << 20)
#define SCTRL_PLL0_FBDIV(x)		(((x) & 0xfff) << 8)
#define SCTRL_PLL0_REFDIV(x)		(((x) & 0x3f) << 2)
#define SCTRL_PLL0_EN			(1 << 0)

#define SCTRL_PLL_CTRL1_REG		(SCTRL_REG_BASE + 0x104)
#define SCTRL_PLL0_CLK_NO_GATE		(1 << 26)
#define SCTRL_PLL0_CFG_VLD		(1 << 25)
#define SCTRL_PLL0_FRACDIV(x)		((x) & 0xFFFFFF)

#define SCTRL_PLL_STAT_REG		(SCTRL_REG_BASE + 0x10C)
#define SCTRL_PLL0_STAT			(1 << 0)

#define SCTRL_SCPEREN0_REG		(SCTRL_REG_BASE + 0x160)
#define SCTRL_SCPERDIS0_REG		(SCTRL_REG_BASE + 0x164)
#define SCTRL_SCPERSTAT0_REG		(SCTRL_REG_BASE + 0x168)

#define SCTRL_SCPEREN1_REG		(SCTRL_REG_BASE + 0x170)
#define SCTRL_SCPERDIS1_REG		(SCTRL_REG_BASE + 0x174)
#define SCTRL_SCPEREN1_REG		(SCTRL_REG_BASE + 0x170)
#define SCTRL_SCPERDIS1_REG		(SCTRL_REG_BASE + 0x174)
#define SCPEREN1_WAIT_DDR_SELFREFRESH_DONE_BYPASS	(1u << 31)
#define SCPEREN_GT_PCLK_MMBUFCFG	(1 << 25)
#define SCPEREN_GT_PCLK_MMBUF		(1 << 23)
#define SCPEREN_GT_ACLK_MMBUF		(1 << 22)
#define SCPEREN_GT_CLK_NOC_AOBUS2MMBUF	(1 << 6)

#define SCTRL_SCPEREN2_REG		(SCTRL_REG_BASE + 0x190)
#define SCTRL_SCPERDIS2_REG		(SCTRL_REG_BASE + 0x194)
#define SCTRL_SCPERSTAT2_REG		(SCTRL_REG_BASE + 0x198)
#define SCTRL_SCPERRSTEN0_REG		(SCTRL_REG_BASE + 0x200)
#define SCTRL_SCPERRSTDIS0_REG		(SCTRL_REG_BASE + 0x204)
#define SCTRL_SCPERRSTSTAT0_REG		(SCTRL_REG_BASE + 0x208)
#define SCTRL_SCPERRSTEN1_REG		(SCTRL_REG_BASE + 0x20C)
#define SCTRL_SCPERRSTDIS1_REG		(SCTRL_REG_BASE + 0x210)
#define SCTRL_SCPERRSTSTAT1_REG		(SCTRL_REG_BASE + 0x214)
#define IP_RST_MMBUFCFG			(1 << 12)
#define IP_RST_MMBUF			(1 << 11)

#define SCTRL_SCPERRSTEN2_REG		(SCTRL_REG_BASE + 0x218)
#define SCTRL_SCPERRSTDIS2_REG		(SCTRL_REG_BASE + 0x21C)
#define SCTRL_SCPERRSTSTAT2_REG		(SCTRL_REG_BASE + 0x220)

#define SCTRL_SCCLKDIV2_REG		(SCTRL_REG_BASE + 0x258)
#define SEL_CLK_MMBUF_MASK		(0x3 << 8)
#define SEL_CLK_MMBUF_PLL0		(0x3 << 8)
#define SCCLKDIV2_GT_PCLK_MMBUF		(1 << 7)

#define SCTRL_SCCLKDIV4_REG		(SCTRL_REG_BASE + 0x260)
#define GT_MMBUF_SYS			(1 << 13)
#define GT_MMBUF_FLL			(1 << 12)
#define GT_PLL_CLK_MMBUF		(1 << 11)

#define SCTRL_SCCLKDIV6_REG		(SCTRL_REG_BASE + 0x268)

#define SCTRL_SCPERCTRL7_REG		(SCTRL_REG_BASE + 0x31C)
#define SCTRL_SCPERSTAT6_REG		(SCTRL_REG_BASE + 0x378)

#define SCTRL_SCINNERSTAT_REG		(SCTRL_REG_BASE + 0x3A0)
#define EMMC_UFS_SEL			(1 << 15)

#define SCTRL_BAK_DATA0_REG		(SCTRL_REG_BASE + 0x40C)
#define SCTRL_BAK_DATA4_REG		(SCTRL_REG_BASE + 0x41C)

#define SCTRL_LPMCU_CLKEN_REG		(SCTRL_REG_BASE + 0x480)
#define SCTRL_LPMCU_CLKDIS_REG		(SCTRL_REG_BASE + 0x484)
#define SCTRL_LPMCU_RSTEN_REG		(SCTRL_REG_BASE + 0x500)
#define SCTRL_LPMCU_RSTDIS_REG		(SCTRL_REG_BASE + 0x504)
#define DDRC_SOFT_BIT			(1 << 6)
#define DDRC_CLK_BIT			(1 << 5)

#define SCTRL_SCPEREN0_SEC_REG		(SCTRL_REG_BASE + 0x900)
#define SCTRL_SCPERDIS0_SEC_REG		(SCTRL_REG_BASE + 0x904)
#define MMBUF_SEC_CTRL_MASK		(0xfff << 20)
#define MMBUF_SEC_CTRL(x)		(((x) & 0xfff) << 20)

#define SCTRL_PERRSTEN1_SEC_REG		(SCTRL_REG_BASE + 0xA50)
#define SCTRL_PERRSTDIS1_SEC_REG	(SCTRL_REG_BASE + 0xA54)
#define SCTRL_PERRSTSTAT1_SEC_REG	(SCTRL_REG_BASE + 0xA58)
#define RST_ASP_SUBSYS_BIT		(1 << 0)

#define SCTRL_PERRSTEN2_SEC_REG		(SCTRL_REG_BASE + 0xB50)
#define SCTRL_PERRSTDIS2_SEC_REG	(SCTRL_REG_BASE + 0xB54)
#define SCTRL_PERRSTSTAT2_SEC_REG	(SCTRL_REG_BASE + 0xB58)

#define SCTRL_HISEECLKDIV_REG		(SCTRL_REG_BASE + 0xC28)
#define SC_SEL_HISEE_PLL_MASK		(1 << 4)
#define SC_SEL_HISEE_PLL0		(1 << 4)
#define SC_SEL_HISEE_PLL2		(0 << 4)
#define SC_DIV_HISEE_PLL_MASK		(7 << 16)
#define SC_DIV_HISEE_PLL(x)		((x) & 0x7)

#define SCTRL_SCSOCID0_REG		(SCTRL_REG_BASE + 0xE00)

#define PMC_REG_BASE			0xFFF31000
#define PMC_PPLL1_CTRL0_REG		(PMC_REG_BASE + 0x038)
#define PMC_PPLL1_CTRL1_REG		(PMC_REG_BASE + 0x03C)
#define PMC_PPLL2_CTRL0_REG		(PMC_REG_BASE + 0x040)
#define PMC_PPLL2_CTRL1_REG		(PMC_REG_BASE + 0x044)
#define PMC_PPLL3_CTRL0_REG		(PMC_REG_BASE + 0x048)
#define PMC_PPLL3_CTRL1_REG		(PMC_REG_BASE + 0x04C)
#define PPLLx_LOCK			(1 << 26)
#define PPLLx_WITHOUT_CLK_GATE		(1 << 26)
#define PPLLx_CFG_VLD			(1 << 25)
#define PPLLx_INT_MOD			(1 << 24)
#define PPLLx_POSTDIV2_MASK		(0x7 << 23)
#define PPLLx_POSTDIV2(x)		(((x) & 0x7) << 23)
#define PPLLx_POSTDIV1_MASK		(0x7 << 20)
#define PPLLx_POSTDIV1(x)		(((x) & 0x7) << 20)
#define PPLLx_FRACDIV_MASK		(0x00FFFFFF)
#define PPLLx_FRACDIV(x)		((x) & 0x00FFFFFF)
#define PPLLx_FBDIV_MASK		(0xfff << 8)
#define PPLLx_FBDIV(x)			(((x) & 0xfff) << 8)
#define PPLLx_REFDIV_MASK		(0x3f << 2)
#define PPLLx_REFDIV(x)			(((x) & 0x3f) << 2)
#define PPLLx_BP			(1 << 1)
#define PPLLx_EN			(1 << 0)

#define PMC_DDRLP_CTRL_REG		(PMC_REG_BASE + 0x30C)
#define DDRC_CSYSREQ_CFG(x)		((x) & 0xF)

#define PMC_NOC_POWER_IDLEREQ_REG	(PMC_REG_BASE + 0x380)
#define PMC_NOC_POWER_IDLEREQ_IVP	(1 << 14)
#define PMC_NOC_POWER_IDLEREQ_DSS	(1 << 13)
#define PMC_NOC_POWER_IDLEREQ_VENC	(1 << 11)
#define PMC_NOC_POWER_IDLEREQ_VDEC	(1 << 10)
#define PMC_NOC_POWER_IDLEREQ_ISP	(1 << 5)
#define PMC_NOC_POWER_IDLEREQ_VCODEC	(1 << 4)
#define DDRPHY_BYPASS_MODE		(1 << 0)

#define PMC_NOC_POWER_IDLEACK_REG	(PMC_REG_BASE + 0x384)
#define PMC_NOC_POWER_IDLE_REG		(PMC_REG_BASE + 0x388)

#define PMU_SSI0_REG_BASE		0xFFF34000

#define PMU_SSI0_LDO8_CTRL0_REG		(PMU_SSI0_REG_BASE + (0x68 << 2))
#define LDO8_CTRL0_EN_1_8V		0x02

#define PMU_SSI0_CLK_TOP_CTRL7_REG	(PMU_SSI0_REG_BASE + (0x10C << 2))
#define NP_XO_ABB_DIG			(1 << 1)

#define LP_CONFIG_REG_BASE		0xFFF3F000

#define DMAC_BASE			0xFDF30000

#define CCI400_REG_BASE			0xE8100000
#define CCI400_SL_IFACE3_CLUSTER_IX	0
#define CCI400_SL_IFACE4_CLUSTER_IX	1

#define GICD_REG_BASE			0xE82B1000
#define GICC_REG_BASE			0xE82B2000
/*
 * GIC400 interrupt handling related constants
 */
#define IRQ_SEC_PHY_TIMER		29
#define IRQ_SEC_SGI_0			8
#define IRQ_SEC_SGI_1			9
#define IRQ_SEC_SGI_2			10
#define IRQ_SEC_SGI_3			11
#define IRQ_SEC_SGI_4			12
#define IRQ_SEC_SGI_5			13
#define IRQ_SEC_SGI_6			14
#define IRQ_SEC_SGI_7			15
#define IRQ_SEC_SGI_8			16

#define IPC_REG_BASE			0xE896A000
#define IPC_BASE			(IPC_REG_BASE)

#define IOMG_REG_BASE			0xE896C000

/* GPIO46: HUB 3.3V enable. active low */
#define IOMG_044_REG			(IOMG_REG_BASE + 0x0B0)
#define IOMG_UART5_RX_REG		(IOMG_REG_BASE + 0x0BC)
#define IOMG_UART5_TX_REG		(IOMG_REG_BASE + 0x0C0)

#define IOCG_REG_BASE			0xE896C800

/* GPIO005: PMIC SSI. (2 << 4) */
#define IOCG_006_REG			(IOCG_REG_BASE + 0x018)

#define TIMER9_REG_BASE			0xE8A00000

#define WDT0_REG_BASE			0xE8A06000
#define WDT1_REG_BASE			0xE8A07000
#define WDT_CONTROL_OFFSET		0x008
#define WDT_LOCK_OFFSET			0xC00

#define WDT_UNLOCK			0x1ACCE551
#define WDT_LOCKED			1

#define PCTRL_REG_BASE			0xE8A09000
#define PCTRL_PERI_CTRL3_REG		(PCTRL_REG_BASE + 0x010)
#define PCTRL_PERI_CTRL24_REG		(PCTRL_REG_BASE + 0x064)

#define GPIO0_BASE			UL(0xE8A0B000)
#define GPIO1_BASE			UL(0xE8A0C000)
#define GPIO2_BASE			UL(0xE8A0D000)
#define GPIO3_BASE			UL(0xE8A0E000)
#define GPIO4_BASE			UL(0xE8A0F000)
#define GPIO5_BASE			UL(0xE8A10000)
#define GPIO6_BASE			UL(0xE8A11000)
#define GPIO7_BASE			UL(0xE8A12000)
#define GPIO8_BASE			UL(0xE8A13000)
#define GPIO9_BASE			UL(0xE8A14000)
#define GPIO10_BASE			UL(0xE8A15000)
#define GPIO11_BASE			UL(0xE8A16000)
#define GPIO12_BASE			UL(0xE8A17000)
#define GPIO13_BASE			UL(0xE8A18000)
#define GPIO14_BASE			UL(0xE8A19000)
#define GPIO15_BASE			UL(0xE8A1A000)
#define GPIO16_BASE			UL(0xE8A1B000)
#define GPIO17_BASE			UL(0xE8A1C000)
#define GPIO20_BASE			UL(0xE8A1F000)
#define GPIO21_BASE			UL(0xE8A20000)
#define GPIO22_BASE			UL(0xFFF0B000)
#define GPIO23_BASE			UL(0xFFF0C000)
#define GPIO24_BASE			UL(0xFFF0D000)
#define GPIO25_BASE			UL(0xFFF0E000)
#define GPIO26_BASE			UL(0xFFF0F000)
#define GPIO27_BASE			UL(0xFFF10000)
#define GPIO28_BASE			UL(0xFFF1D000)

#define TZC_REG_BASE			0xE8A21000
#define TZC_STAT0_REG			(TZC_REG_BASE + 0x800)
#define TZC_EN0_REG			(TZC_REG_BASE + 0x804)
#define TZC_DIS0_REG			(TZC_REG_BASE + 0x808)
#define TZC_STAT1_REG			(TZC_REG_BASE + 0x80C)
#define TZC_EN1_REG			(TZC_REG_BASE + 0x810)
#define TZC_DIS1_REG			(TZC_REG_BASE + 0x814)
#define TZC_STAT2_REG			(TZC_REG_BASE + 0x818)
#define TZC_EN2_REG			(TZC_REG_BASE + 0x81C)
#define TZC_DIS2_REG			(TZC_REG_BASE + 0x820)
#define TZC_STAT3_REG			(TZC_REG_BASE + 0x824)
#define TZC_EN3_REG			(TZC_REG_BASE + 0x828)
#define TZC_DIS3_REG			(TZC_REG_BASE + 0x82C)
#define TZC_STAT4_REG			(TZC_REG_BASE + 0x830)
#define TZC_EN4_REG			(TZC_REG_BASE + 0x834)
#define TZC_DIS4_REG			(TZC_REG_BASE + 0x838)
#define TZC_STAT5_REG			(TZC_REG_BASE + 0x83C)
#define TZC_EN5_REG			(TZC_REG_BASE + 0x840)
#define TZC_DIS5_REG			(TZC_REG_BASE + 0x844)
#define TZC_STAT6_REG			(TZC_REG_BASE + 0x848)
#define TZC_EN6_REG			(TZC_REG_BASE + 0x84C)
#define TZC_DIS6_REG			(TZC_REG_BASE + 0x850)
#define TZC_STAT7_REG			(TZC_REG_BASE + 0x854)
#define TZC_EN7_REG			(TZC_REG_BASE + 0x858)
#define TZC_DIS7_REG			(TZC_REG_BASE + 0x85C)
#define TZC_STAT8_REG			(TZC_REG_BASE + 0x860)
#define TZC_EN8_REG			(TZC_REG_BASE + 0x864)
#define TZC_DIS8_REG			(TZC_REG_BASE + 0x868)

#define MMBUF_BASE			0xEA800000

#define ACPU_DMCPACK0_BASE		0xEA900000

#define ACPU_DMCPACK1_BASE		0xEA920000

#define ACPU_DMCPACK2_BASE		0xEA940000

#define ACPU_DMCPACK3_BASE		0xEA960000

#define UART5_REG_BASE			0xFDF05000

#define USB3OTG_REG_BASE		0xFF100000

#define UFS_REG_BASE			0xFF3B0000

#define UFS_SYS_REG_BASE		0xFF3B1000

#define UFS_SYS_PSW_POWER_CTRL_REG	(UFS_SYS_REG_BASE + 0x004)
#define UFS_SYS_PHY_ISO_EN_REG		(UFS_SYS_REG_BASE + 0x008)
#define UFS_SYS_HC_LP_CTRL_REG		(UFS_SYS_REG_BASE + 0x00C)
#define UFS_SYS_PHY_CLK_CTRL_REG	(UFS_SYS_REG_BASE + 0x010)
#define UFS_SYS_PSW_CLK_CTRL_REG	(UFS_SYS_REG_BASE + 0x014)
#define UFS_SYS_CLOCK_GATE_BYPASS_REG	(UFS_SYS_REG_BASE + 0x018)
#define UFS_SYS_RESET_CTRL_EN_REG	(UFS_SYS_REG_BASE + 0x01C)
#define UFS_SYS_MONITOR_HH_REG		(UFS_SYS_REG_BASE + 0x03C)
#define UFS_SYS_UFS_SYSCTRL_REG		(UFS_SYS_REG_BASE + 0x05C)
#define UFS_SYS_UFS_DEVICE_RESET_CTRL_REG	(UFS_SYS_REG_BASE + 0x060)
#define UFS_SYS_UFS_APB_ADDR_MASK_REG	(UFS_SYS_REG_BASE + 0x064)

#define BIT_UFS_PSW_ISO_CTRL			(1 << 16)
#define BIT_UFS_PSW_MTCMOS_EN			(1 << 0)
#define BIT_UFS_REFCLK_ISO_EN			(1 << 16)
#define BIT_UFS_PHY_ISO_CTRL			(1 << 0)
#define BIT_SYSCTRL_LP_ISOL_EN			(1 << 16)
#define BIT_SYSCTRL_PWR_READY			(1 << 8)
#define BIT_SYSCTRL_REF_CLOCK_EN		(1 << 24)
#define MASK_SYSCTRL_REF_CLOCK_SEL		(3 << 8)
#define MASK_SYSCTRL_CFG_CLOCK_FREQ		(0xFF)
#define BIT_SYSCTRL_PSW_CLK_EN			(1 << 4)
#define MASK_UFS_CLK_GATE_BYPASS		(0x3F)
#define BIT_SYSCTRL_LP_RESET_N			(1 << 0)
#define BIT_UFS_REFCLK_SRC_SE1			(1 << 0)
#define MASK_UFS_SYSCTRL_BYPASS			(0x3F << 16)
#define MASK_UFS_DEVICE_RESET			(1 << 16)
#define BIT_UFS_DEVICE_RESET			(1 << 0)

#define GPIO18_BASE			UL(0xFF3B4000)
#define GPIO19_BASE			UL(0xFF3B5000)

#define IOMG_FIX_REG_BASE		0xFF3B6000

/* GPIO150: LED */
#define IOMG_FIX_006_REG		(IOMG_FIX_REG_BASE + 0x018)
/* GPIO151: LED */
#define IOMG_FIX_007_REG		(IOMG_FIX_REG_BASE + 0x01C)

#define IOMG_AO_REG_BASE		0xFFF11000

/* GPIO189: LED */
#define IOMG_AO_011_REG			(IOMG_AO_REG_BASE + 0x02C)
/* GPIO190: LED */
#define IOMG_AO_012_REG			(IOMG_AO_REG_BASE + 0x030)
/* GPIO202: type C enable. active low */
#define IOMG_AO_023_REG			(IOMG_AO_REG_BASE + 0x05C)
/* GPIO206: USB switch. active low */
#define IOMG_AO_026_REG			(IOMG_AO_REG_BASE + 0x068)
/* GPIO219: PD interrupt. pull up */
#define IOMG_AO_039_REG			(IOMG_AO_REG_BASE + 0x09C)
/* GPIO213: PCIE_CLKREQ_N */
#define IOMG_AO_033_REG			(IOMG_AO_REG_BASE + 0x084)

#define IOCG_AO_REG_BASE		0xFFF1187C
/* GPIO219: PD interrupt. pull up */
#define IOCG_AO_043_REG			(IOCG_AO_REG_BASE + 0x030)

#define EDMAC_BASE				0xfdf30000
#define EDMAC_SEC_CTRL				(EDMAC_BASE + 0x694)
#define EDMAC_AXI_CONF(x)			(EDMAC_BASE + 0x820 + (x << 6))
#define EDMAC_SEC_CTRL_INTR_SEC			(1 << 1)
#define EDMAC_SEC_CTRL_GLOBAL_SEC		(1 << 0)
#define EDMAC_CHANNEL_NUMS				16

#define IOMCU_DMAC_BASE			0xffd77000
#define IOMCU_DMAC_SEC_CTRL		(IOMCU_DMAC_BASE + 0x694)
#define IOMCU_DMAC_AXI_CONF(x)			(IOMCU_DMAC_BASE + 0x820 + ((x) << 6))
#define IOMCU_DMAC_AXI_CONF_ARPROT_NS		(1 << 6)
#define IOMCU_DMAC_AXI_CONF_AWPROT_NS		(1 << 18)
#define IOMCU_DMAC_SEC_CTRL_INTR_SEC	(1 << 1)
#define IOMCU_DMAC_SEC_CTRL_GLOBAL_SEC	(1 << 0)
#define IOMCU_DMAC_CHANNEL_NUMS			8

#endif /* HI3660_H */