Skip to content

GitLab

Commit 277d6af5 authored by Yann Gautier's avatar Yann Gautier
Browse files

fdts: stm32mp1: realign device tree with kernel 



There is one dtsi file per SoC version:
- STM32MP151: common part for all version, Single Cortex-A7
- STM32MP153: Dual Cortex-A7
- STM32MP157: + GPU and DSI, but not needed for TF-A

The STM32MP15xC include a cryptography peripheral, add it in a dedicated
file.

There are 4 packages available, for which  the IOs number change. Have one
file for each package. The 2 packages AB and AD are added.

STM32157A-DK1 and STM32MP157C-DK2 share most of their features, a common
dkx file is then created.

Some reordering is done in other files, and realign with kernel DT files.

The DDR files are generated with our internal tool, no changes in the
registers values.

Change-Id: I9f2ef00306310abe34b94c2f10fc7a77a10493d1
Signed-off-by: default avatarYann Gautier <yann.gautier@st.com>
parent da9a837c
Show whitespace changes
Inline Side-by-side
fdts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi
View file @ 277d6af5
// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause // SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
/* /*
* Copyright (C) 2018, STMicroelectronics - All Rights Reserved * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
*/
/*
* File generated by STMicroelectronics STM32CubeMX DDR Tool for MPUs
* DDR type: DDR3 / DDR3L
* DDR width: 16bits
* DDR density: 4Gb
* System frequency: 533000Khz
* Relaxed Timing Mode: false
* Address mapping type: RBC
* *
* STM32MP157C DK1/DK2 BOARD configuration * Save Date: 2020.02.20, save Time: 18:45:20
* 1x DDR3L 4Gb, 16-bit, 533MHz.
* Reference used NT5CC256M16DP-DI from NANYA
*
* DDR type / Platform DDR3/3L
* freq 533MHz
* width 16
* datasheet 0 = MT41J256M16-187 / DDR3-1066 bin G
* DDR density 4
* timing mode optimized
* Scheduling/QoS options : type = 2
* address mapping : RBC
* Tc > + 85C : N
*/ */
#define DDR_MEM_NAME "DDR3-1066/888 bin G 1x4Gb 533MHz v1.45"
#define DDR_MEM_NAME "DDR3-DDR3L 16bits 533000Khz"
#define DDR_MEM_SPEED 533000 #define DDR_MEM_SPEED 533000
#define DDR_MEM_SIZE 0x20000000 #define DDR_MEM_SIZE 0x20000000
...@@ -50,15 +49,6 @@ ...@@ -50,15 +49,6 @@
#define DDR_DFIUPD1 0x00000000 #define DDR_DFIUPD1 0x00000000
#define DDR_DFIUPD2 0x00000000 #define DDR_DFIUPD2 0x00000000
#define DDR_DFIPHYMSTR 0x00000000 #define DDR_DFIPHYMSTR 0x00000000
#define DDR_ADDRMAP1 0x00070707
#define DDR_ADDRMAP2 0x00000000
#define DDR_ADDRMAP3 0x1F000000
#define DDR_ADDRMAP4 0x00001F1F
#define DDR_ADDRMAP5 0x06060606
#define DDR_ADDRMAP6 0x0F060606
#define DDR_ADDRMAP9 0x00000000
#define DDR_ADDRMAP10 0x00000000
#define DDR_ADDRMAP11 0x00000000
#define DDR_ODTCFG 0x06000600 #define DDR_ODTCFG 0x06000600
#define DDR_ODTMAP 0x00000001 #define DDR_ODTMAP 0x00000001
#define DDR_SCHED 0x00000C01 #define DDR_SCHED 0x00000C01
...@@ -83,6 +73,15 @@ ...@@ -83,6 +73,15 @@
#define DDR_PCFGQOS1_1 0x00800040 #define DDR_PCFGQOS1_1 0x00800040
#define DDR_PCFGWQOS0_1 0x01100C03 #define DDR_PCFGWQOS0_1 0x01100C03
#define DDR_PCFGWQOS1_1 0x01000200 #define DDR_PCFGWQOS1_1 0x01000200
#define DDR_ADDRMAP1 0x00070707
#define DDR_ADDRMAP2 0x00000000
#define DDR_ADDRMAP3 0x1F000000
#define DDR_ADDRMAP4 0x00001F1F
#define DDR_ADDRMAP5 0x06060606
#define DDR_ADDRMAP6 0x0F060606
#define DDR_ADDRMAP9 0x00000000
#define DDR_ADDRMAP10 0x00000000
#define DDR_ADDRMAP11 0x00000000
#define DDR_PGCR 0x01442E02 #define DDR_PGCR 0x01442E02
#define DDR_PTR0 0x0022AA5B #define DDR_PTR0 0x0022AA5B
#define DDR_PTR1 0x04841104 #define DDR_PTR1 0x04841104
......
fdts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi
View file @ 277d6af5
// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause // SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
/* /*
* Copyright (C) 2018, STMicroelectronics - All Rights Reserved * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
*/
/*
* File generated by STMicroelectronics STM32CubeMX DDR Tool for MPUs
* DDR type: DDR3 / DDR3L
* DDR width: 32bits
* DDR density: 8Gb
* System frequency: 533000Khz
* Relaxed Timing Mode: false
* Address mapping type: RBC
* *
* STM32MP157C ED1 BOARD configuration * Save Date: 2020.02.20, save Time: 18:49:33
* 2x DDR3L 4Gb each, 16-bit, 533MHz, Single Die Package in flyby topology.
* Reference used NT5CC256M16DP-DI from NANYA
*
* DDR type / Platform DDR3/3L
* freq 533MHz
* width 32
* datasheet 0 = MT41J256M16-187 / DDR3-1066 bin G
* DDR density 8
* timing mode optimized
* Scheduling/QoS options : type = 2
* address mapping : RBC
* Tc > + 85C : N
*/ */
#define DDR_MEM_NAME "DDR3-1066/888 bin G 2x4Gb 533MHz v1.45"
#define DDR_MEM_NAME "DDR3-DDR3L 32bits 533000Khz"
#define DDR_MEM_SPEED 533000 #define DDR_MEM_SPEED 533000
#define DDR_MEM_SIZE 0x40000000 #define DDR_MEM_SIZE 0x40000000
...@@ -50,15 +49,6 @@ ...@@ -50,15 +49,6 @@
#define DDR_DFIUPD1 0x00000000 #define DDR_DFIUPD1 0x00000000
#define DDR_DFIUPD2 0x00000000 #define DDR_DFIUPD2 0x00000000
#define DDR_DFIPHYMSTR 0x00000000 #define DDR_DFIPHYMSTR 0x00000000
#define DDR_ADDRMAP1 0x00080808
#define DDR_ADDRMAP2 0x00000000
#define DDR_ADDRMAP3 0x00000000
#define DDR_ADDRMAP4 0x00001F1F
#define DDR_ADDRMAP5 0x07070707
#define DDR_ADDRMAP6 0x0F070707
#define DDR_ADDRMAP9 0x00000000
#define DDR_ADDRMAP10 0x00000000
#define DDR_ADDRMAP11 0x00000000
#define DDR_ODTCFG 0x06000600 #define DDR_ODTCFG 0x06000600
#define DDR_ODTMAP 0x00000001 #define DDR_ODTMAP 0x00000001
#define DDR_SCHED 0x00000C01 #define DDR_SCHED 0x00000C01
...@@ -83,6 +73,15 @@ ...@@ -83,6 +73,15 @@
#define DDR_PCFGQOS1_1 0x00800040 #define DDR_PCFGQOS1_1 0x00800040
#define DDR_PCFGWQOS0_1 0x01100C03 #define DDR_PCFGWQOS0_1 0x01100C03
#define DDR_PCFGWQOS1_1 0x01000200 #define DDR_PCFGWQOS1_1 0x01000200
#define DDR_ADDRMAP1 0x00080808
#define DDR_ADDRMAP2 0x00000000
#define DDR_ADDRMAP3 0x00000000
#define DDR_ADDRMAP4 0x00001F1F
#define DDR_ADDRMAP5 0x07070707
#define DDR_ADDRMAP6 0x0F070707
#define DDR_ADDRMAP9 0x00000000
#define DDR_ADDRMAP10 0x00000000
#define DDR_ADDRMAP11 0x00000000
#define DDR_PGCR 0x01442E02 #define DDR_PGCR 0x01442E02
#define DDR_PTR0 0x0022AA5B #define DDR_PTR0 0x0022AA5B
#define DDR_PTR1 0x04841104 #define DDR_PTR1 0x04841104
......
fdts/stm32mp15-pinctrl.dtsi 0 → 100644
View file @ 277d6af5
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
* Copyright (C) STMicroelectronics 2017 - All Rights Reserved
* Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
*/
#include <dt-bindings/pinctrl/stm32-pinfunc.h>
&pinctrl {
fmc_pins_a: fmc-0 {
pins1 {
pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */
<STM32_PINMUX('D', 5, AF12)>, /* FMC_NWE */
<STM32_PINMUX('D', 11, AF12)>, /* FMC_A16_FMC_CLE */
<STM32_PINMUX('D', 12, AF12)>, /* FMC_A17_FMC_ALE */
<STM32_PINMUX('D', 14, AF12)>, /* FMC_D0 */
<STM32_PINMUX('D', 15, AF12)>, /* FMC_D1 */
<STM32_PINMUX('D', 0, AF12)>, /* FMC_D2 */
<STM32_PINMUX('D', 1, AF12)>, /* FMC_D3 */
<STM32_PINMUX('E', 7, AF12)>, /* FMC_D4 */
<STM32_PINMUX('E', 8, AF12)>, /* FMC_D5 */
<STM32_PINMUX('E', 9, AF12)>, /* FMC_D6 */
<STM32_PINMUX('E', 10, AF12)>, /* FMC_D7 */
<STM32_PINMUX('G', 9, AF12)>; /* FMC_NE2_FMC_NCE */
bias-disable;
drive-push-pull;
slew-rate = <1>;
};
pins2 {
pinmux = <STM32_PINMUX('D', 6, AF12)>; /* FMC_NWAIT */
bias-pull-up;
};
};
qspi_clk_pins_a: qspi-clk-0 {
pins {
pinmux = <STM32_PINMUX('F', 10, AF9)>; /* QSPI_CLK */
bias-disable;
drive-push-pull;
slew-rate = <3>;
};
};
qspi_bk1_pins_a: qspi-bk1-0 {
pins1 {
pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */
<STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */
<STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */
<STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */
bias-disable;
drive-push-pull;
slew-rate = <1>;
};
pins2 {
pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */
bias-pull-up;
drive-push-pull;
slew-rate = <1>;
};
};
qspi_bk2_pins_a: qspi-bk2-0 {
pins1 {
pinmux = <STM32_PINMUX('H', 2, AF9)>, /* QSPI_BK2_IO0 */
<STM32_PINMUX('H', 3, AF9)>, /* QSPI_BK2_IO1 */
<STM32_PINMUX('G', 10, AF11)>, /* QSPI_BK2_IO2 */
<STM32_PINMUX('G', 7, AF11)>; /* QSPI_BK2_IO3 */
bias-disable;
drive-push-pull;
slew-rate = <1>;
};
pins2 {
pinmux = <STM32_PINMUX('C', 0, AF10)>; /* QSPI_BK2_NCS */
bias-pull-up;
drive-push-pull;
slew-rate = <1>;
};
};
rtc_out2_rmp_pins_a: rtc-out2-rmp-pins-0 {
pins {
pinmux = <STM32_PINMUX('I', 8, ANALOG)>; /* RTC_OUT2_RMP */
};
};
sdmmc1_b4_pins_a: sdmmc1-b4-0 {
pins1 {
pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
<STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
<STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
<STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
<STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
slew-rate = <1>;
drive-push-pull;
bias-disable;
};
pins2 {
pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
slew-rate = <2>;
drive-push-pull;
bias-disable;
};
};
sdmmc1_dir_pins_a: sdmmc1-dir-0 {
pins1 {
pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */
<STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
<STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */
slew-rate = <1>;
drive-push-pull;
bias-pull-up;
};
pins2{
pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */
bias-pull-up;
};
};
sdmmc2_b4_pins_a: sdmmc2-b4-0 {
pins1 {
pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
<STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
<STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
<STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
<STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
slew-rate = <1>;
drive-push-pull;
bias-pull-up;
};
pins2 {
pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
slew-rate = <2>;
drive-push-pull;
bias-pull-up;
};
};
sdmmc2_b4_pins_b: sdmmc2-b4-1 {
pins1 {
pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
<STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
<STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
<STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
<STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
slew-rate = <1>;
drive-push-pull;
bias-disable;
};
pins2 {
pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
slew-rate = <2>;
drive-push-pull;
bias-disable;
};
};
sdmmc2_d47_pins_a: sdmmc2-d47-0 {
pins {
pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
<STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
<STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */
<STM32_PINMUX('D', 3, AF9)>; /* SDMMC2_D7 */
slew-rate = <1>;
drive-push-pull;
bias-pull-up;
};
};
uart4_pins_a: uart4-0 {
pins1 {
pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
bias-disable;
drive-push-pull;
slew-rate = <0>;
};
pins2 {
pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
bias-disable;
};
};
uart4_pins_b: uart4-1 {
pins1 {
pinmux = <STM32_PINMUX('D', 1, AF8)>; /* UART4_TX */
bias-disable;
drive-push-pull;
slew-rate = <0>;
};
pins2 {
pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
bias-disable;
};
};
uart7_pins_a: uart7-0 {
pins1 {
pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART4_TX */
bias-disable;
drive-push-pull;
slew-rate = <0>;
};
pins2 {
pinmux = <STM32_PINMUX('E', 7, AF7)>, /* UART4_RX */
<STM32_PINMUX('E', 10, AF7)>, /* UART4_CTS */
<STM32_PINMUX('E', 9, AF7)>; /* UART4_RTS */
bias-disable;
};
};
uart7_pins_b: uart7-1 {
pins1 {
pinmux = <STM32_PINMUX('E', 8, AF7)>; /* USART7_TX */
bias-disable;
drive-push-pull;
slew-rate = <0>;
};
pins2 {
pinmux = <STM32_PINMUX('E', 7, AF7)>; /* USART7_RX */
bias-disable;
};
};
usart2_pins_a: usart2-0 {
pins1 {
pinmux = <STM32_PINMUX('D', 5, AF7)>, /* USART2_TX */
<STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */
bias-disable;
drive-push-pull;
slew-rate = <3>;
};
pins2 {
pinmux = <STM32_PINMUX('D', 6, AF7)>, /* USART2_RX */
<STM32_PINMUX('D', 3, AF7)>; /* USART2_CTS_NSS */
bias-disable;
};
};
usart3_pins_a: usart3-0 {
pins1 {
pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
<STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
bias-disable;
drive-push-pull;
slew-rate = <0>;
};
pins2 {
pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
<STM32_PINMUX('I', 10, AF8)>; /* USART3_CTS_NSS */
bias-disable;
};
};
usart3_pins_b: usart3-1 {
pins1 {
pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
<STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
bias-disable;
drive-push-pull;
slew-rate = <0>;
};
pins2 {
pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
<STM32_PINMUX('B', 13, AF7)>; /* USART3_CTS_NSS */
bias-disable;
};
};
usbotg_hs_pins_a: usbotg_hs-0 {
pins {
pinmux = <STM32_PINMUX('A', 10, ANALOG)>; /* OTG_ID */
};
};
usbotg_fs_dp_dm_pins_a: usbotg-fs-dp-dm-0 {
pins {
pinmux = <STM32_PINMUX('A', 11, ANALOG)>, /* OTG_FS_DM */
<STM32_PINMUX('A', 12, ANALOG)>; /* OTG_FS_DP */
};
};
};
&pinctrl_z {
i2c4_pins_a: i2c4-0 {
pins {
pinmux = <STM32_PINMUX('Z', 4, AF6)>, /* I2C4_SCL */
<STM32_PINMUX('Z', 5, AF6)>; /* I2C4_SDA */
bias-disable;
drive-open-drain;
slew-rate = <0>;
};
};
};
fdts/stm32mp157c.dtsi → fdts/stm32mp151.dtsi
View file @ 277d6af5
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/* /*
* Copyright (C) STMicroelectronics 2017-2019 - All Rights Reserved * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
* Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics. * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
*/ */
#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/arm-gic.h>
...@@ -11,6 +11,22 @@ ...@@ -11,6 +11,22 @@
#address-cells = <1>; #address-cells = <1>;
#size-cells = <1>; #size-cells = <1>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0>;
};
};
psci {
compatible = "arm,psci-1.0";
method = "smc";
};
intc: interrupt-controller@a0021000 { intc: interrupt-controller@a0021000 {
compatible = "arm,cortex-a7-gic"; compatible = "arm,cortex-a7-gic";
#interrupt-cells = <3>; #interrupt-cells = <3>;
...@@ -49,18 +65,6 @@ ...@@ -49,18 +65,6 @@
compatible = "fixed-clock"; compatible = "fixed-clock";
clock-frequency = <4000000>; clock-frequency = <4000000>;
}; };
clk_i2s_ckin: i2s_ckin {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <0>;
};
clk_dsi_phy: ck_dsi_phy {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <0>;
};
}; };
soc { soc {
...@@ -83,6 +87,7 @@ ...@@ -83,6 +87,7 @@
usart2: serial@4000e000 { usart2: serial@4000e000 {
compatible = "st,stm32h7-uart"; compatible = "st,stm32h7-uart";
reg = <0x4000e000 0x400>; reg = <0x4000e000 0x400>;
interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rcc USART2_K>; clocks = <&rcc USART2_K>;
resets = <&rcc USART2_R>; resets = <&rcc USART2_R>;
status = "disabled"; status = "disabled";
...@@ -91,6 +96,7 @@ ...@@ -91,6 +96,7 @@
usart3: serial@4000f000 { usart3: serial@4000f000 {
compatible = "st,stm32h7-uart"; compatible = "st,stm32h7-uart";
reg = <0x4000f000 0x400>; reg = <0x4000f000 0x400>;
interrupts-extended = <&exti 28 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rcc USART3_K>; clocks = <&rcc USART3_K>;
resets = <&rcc USART3_R>; resets = <&rcc USART3_R>;
status = "disabled"; status = "disabled";
...@@ -99,23 +105,26 @@ ...@@ -99,23 +105,26 @@
uart4: serial@40010000 { uart4: serial@40010000 {
compatible = "st,stm32h7-uart"; compatible = "st,stm32h7-uart";
reg = <0x40010000 0x400>; reg = <0x40010000 0x400>;
interrupts-extended = <&exti 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rcc UART4_K>; clocks = <&rcc UART4_K>;
resets = <&rcc UART4_R>; resets = <&rcc UART4_R>;
wakeup-source;
status = "disabled"; status = "disabled";
}; };
uart5: serial@40011000 { uart5: serial@40011000 {
compatible = "st,stm32h7-uart"; compatible = "st,stm32h7-uart";
reg = <0x40011000 0x400>; reg = <0x40011000 0x400>;
interrupts-extended = <&exti 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rcc UART5_K>; clocks = <&rcc UART5_K>;
resets = <&rcc UART5_R>; resets = <&rcc UART5_R>;
status = "disabled"; status = "disabled";
}; };
uart7: serial@40018000 { uart7: serial@40018000 {
compatible = "st,stm32h7-uart"; compatible = "st,stm32h7-uart";
reg = <0x40018000 0x400>; reg = <0x40018000 0x400>;
interrupts-extended = <&exti 32 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rcc UART7_K>; clocks = <&rcc UART7_K>;
resets = <&rcc UART7_R>; resets = <&rcc UART7_R>;
status = "disabled"; status = "disabled";
...@@ -124,6 +133,7 @@ ...@@ -124,6 +133,7 @@
uart8: serial@40019000 { uart8: serial@40019000 {
compatible = "st,stm32h7-uart"; compatible = "st,stm32h7-uart";
reg = <0x40019000 0x400>; reg = <0x40019000 0x400>;
interrupts-extended = <&exti 33 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rcc UART8_K>; clocks = <&rcc UART8_K>;
resets = <&rcc UART8_R>; resets = <&rcc UART8_R>;
status = "disabled"; status = "disabled";
...@@ -132,6 +142,7 @@ ...@@ -132,6 +142,7 @@
usart6: serial@44003000 { usart6: serial@44003000 {
compatible = "st,stm32h7-uart"; compatible = "st,stm32h7-uart";
reg = <0x44003000 0x400>; reg = <0x44003000 0x400>;
interrupts-extended = <&exti 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rcc USART6_K>; clocks = <&rcc USART6_K>;
resets = <&rcc USART6_R>; resets = <&rcc USART6_R>;
status = "disabled"; status = "disabled";
...@@ -147,19 +158,6 @@ ...@@ -147,19 +158,6 @@
status = "disabled"; status = "disabled";
}; };
sdmmc3: sdmmc@48004000 {
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00253180>;
reg = <0x48004000 0x400>, <0x48005000 0x400>;
clocks = <&rcc SDMMC3_K>;
clock-names = "apb_pclk";
resets = <&rcc SDMMC3_R>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <120000000>;
status = "disabled";
};
usbotg_hs: usb-otg@49000000 { usbotg_hs: usb-otg@49000000 {
compatible = "st,stm32mp1-hsotg", "snps,dwc2"; compatible = "st,stm32mp1-hsotg", "snps,dwc2";
reg = <0x49000000 0x10000>; reg = <0x49000000 0x10000>;
...@@ -167,20 +165,62 @@ ...@@ -167,20 +165,62 @@
clock-names = "otg"; clock-names = "otg";
resets = <&rcc USBO_R>; resets = <&rcc USBO_R>;
reset-names = "dwc2"; reset-names = "dwc2";
interrupts-extended = <&exti 44 IRQ_TYPE_LEVEL_HIGH>;
g-rx-fifo-size = <512>;
g-np-tx-fifo-size = <32>;
g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
dr_mode = "otg";
usb33d-supply = <&usb33>;
status = "disabled"; status = "disabled";
}; };
rcc: rcc@50000000 { rcc: rcc@50000000 {
compatible = "st,stm32mp1-rcc", "syscon"; compatible = "st,stm32mp1-rcc", "syscon";
reg = <0x50000000 0x1000>; reg = <0x50000000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
#clock-cells = <1>; #clock-cells = <1>;
#reset-cells = <1>; #reset-cells = <1>;
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
secure-interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
secure-interrupt-names = "wakeup";
};
pwr_regulators: pwr@50001000 {
compatible = "st,stm32mp1,pwr-reg";
reg = <0x50001000 0x10>;
st,tzcr = <&rcc 0x0 0x1>;
reg11: reg11 {
regulator-name = "reg11";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
};
reg18: reg18 {
regulator-name = "reg18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
}; };
pwr: pwr@50001000 { usb33: usb33 {
compatible = "st,stm32mp1-pwr", "syscon", "simple-mfd"; regulator-name = "usb33";
reg = <0x50001000 0x400>; regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
};
pwr_mcu: pwr_mcu@50001014 {
compatible = "st,stm32mp151-pwr-mcu", "syscon";
reg = <0x50001014 0x4>;
};
pwr_irq: pwr@50001020 {
compatible = "st,stm32mp1-pwr";
reg = <0x50001020 0x100>;
interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <3>;
}; };
exti: interrupt-controller@5000d000 { exti: interrupt-controller@5000d000 {
...@@ -196,7 +236,7 @@ ...@@ -196,7 +236,7 @@
exti_pwr: exti-pwr { exti_pwr: exti-pwr {
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
interrupt-parent = <&pwr>; interrupt-parent = <&pwr_irq>;
st,irq-number = <6>; st,irq-number = <6>;
}; };
}; };
...@@ -207,15 +247,6 @@ ...@@ -207,15 +247,6 @@
clocks = <&rcc SYSCFG>; clocks = <&rcc SYSCFG>;
}; };
cryp1: cryp@54001000 {
compatible = "st,stm32mp1-cryp";
reg = <0x54001000 0x400>;
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rcc CRYP1>;
resets = <&rcc CRYP1_R>;
status = "disabled";
};
hash1: hash@54002000 { hash1: hash@54002000 {
compatible = "st,stm32f756-hash"; compatible = "st,stm32f756-hash";
reg = <0x54002000 0x400>; reg = <0x54002000 0x400>;
...@@ -242,24 +273,28 @@ ...@@ -242,24 +273,28 @@
<0x81000000 0x1000>, <0x81000000 0x1000>,
<0x89010000 0x1000>, <0x89010000 0x1000>,
<0x89020000 0x1000>; <0x89020000 0x1000>;
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rcc FMC_K>; clocks = <&rcc FMC_K>;
resets = <&rcc FMC_R>; resets = <&rcc FMC_R>;
status = "disabled"; status = "disabled";
}; };
qspi: qspi@58003000 { qspi: spi@58003000 {
compatible = "st,stm32f469-qspi"; compatible = "st,stm32f469-qspi";
reg = <0x58003000 0x1000>, <0x70000000 0x10000000>; reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
reg-names = "qspi", "qspi_mm"; reg-names = "qspi", "qspi_mm";
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rcc QSPI_K>; clocks = <&rcc QSPI_K>;
resets = <&rcc QSPI_R>; resets = <&rcc QSPI_R>;
status = "disabled"; status = "disabled";
}; };
sdmmc1: sdmmc@58005000 { sdmmc1: sdmmc@58005000 {
compatible = "arm,pl18x", "arm,primecell"; compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00253180>; arm,primecell-periphid = <0x00253180>;
reg = <0x58005000 0x1000>, <0x58006000 0x1000>; reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
clocks = <&rcc SDMMC1_K>; clocks = <&rcc SDMMC1_K>;
clock-names = "apb_pclk"; clock-names = "apb_pclk";
resets = <&rcc SDMMC1_R>; resets = <&rcc SDMMC1_R>;
...@@ -270,9 +305,11 @@ ...@@ -270,9 +305,11 @@
}; };
sdmmc2: sdmmc@58007000 { sdmmc2: sdmmc@58007000 {
compatible = "arm,pl18x", "arm,primecell"; compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00253180>; arm,primecell-periphid = <0x00253180>;
reg = <0x58007000 0x1000>, <0x58008000 0x1000>; reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
clocks = <&rcc SDMMC2_K>; clocks = <&rcc SDMMC2_K>;
clock-names = "apb_pclk"; clock-names = "apb_pclk";
resets = <&rcc SDMMC2_R>; resets = <&rcc SDMMC2_R>;
...@@ -285,17 +322,39 @@ ...@@ -285,17 +322,39 @@
iwdg2: watchdog@5a002000 { iwdg2: watchdog@5a002000 {
compatible = "st,stm32mp1-iwdg"; compatible = "st,stm32mp1-iwdg";
reg = <0x5a002000 0x400>; reg = <0x5a002000 0x400>;
secure-interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rcc IWDG2>, <&rcc CK_LSI>; clocks = <&rcc IWDG2>, <&rcc CK_LSI>;
clock-names = "pclk", "lsi"; clock-names = "pclk", "lsi";
status = "disabled"; status = "disabled";
}; };
usbphyc: usbphyc@5a006000 {
#address-cells = <1>;
#size-cells = <0>;
#clock-cells = <0>;
compatible = "st,stm32mp1-usbphyc";
reg = <0x5a006000 0x1000>;
clocks = <&rcc USBPHY_K>;
resets = <&rcc USBPHY_R>;
vdda1v1-supply = <&reg11>;
vdda1v8-supply = <&reg18>;
status = "disabled";
usbphyc_port0: usb-phy@0 {
#phy-cells = <0>;
reg = <0>;
};
usbphyc_port1: usb-phy@1 {
#phy-cells = <1>;
reg = <1>;
};
};
usart1: serial@5c000000 { usart1: serial@5c000000 {
compatible = "st,stm32h7-uart"; compatible = "st,stm32h7-uart";
reg = <0x5c000000 0x400>; reg = <0x5c000000 0x400>;
interrupt-names = "event", "wakeup"; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
interrupts-extended = <&intc GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
<&exti 26 1>;
clocks = <&rcc USART1_K>; clocks = <&rcc USART1_K>;
resets = <&rcc USART1_R>; resets = <&rcc USART1_R>;
status = "disabled"; status = "disabled";
...@@ -313,16 +372,26 @@ ...@@ -313,16 +372,26 @@
}; };
i2c4: i2c@5c002000 { i2c4: i2c@5c002000 {
compatible = "st,stm32f7-i2c"; compatible = "st,stm32mp15-i2c";
reg = <0x5c002000 0x400>; reg = <0x5c002000 0x400>;
interrupt-names = "event", "error", "wakeup"; interrupt-names = "event", "error";
interrupts-extended = <&intc GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, interrupts-extended = <&exti 24 IRQ_TYPE_LEVEL_HIGH>,
<&intc GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, <&intc GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
<&exti 24 1>;
clocks = <&rcc I2C4_K>; clocks = <&rcc I2C4_K>;
resets = <&rcc I2C4_R>; resets = <&rcc I2C4_R>;
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
st,syscfg-fmp = <&syscfg 0x4 0x8>;
wakeup-source;
status = "disabled";
};
iwdg1: watchdog@5c003000 {
compatible = "st,stm32mp1-iwdg";
reg = <0x5C003000 0x400>;
interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rcc IWDG1>, <&rcc CK_LSI>;
clock-names = "pclk", "lsi";
status = "disabled"; status = "disabled";
}; };
...@@ -331,8 +400,7 @@ ...@@ -331,8 +400,7 @@
reg = <0x5c004000 0x400>; reg = <0x5c004000 0x400>;
clocks = <&rcc RTCAPB>, <&rcc RTC>; clocks = <&rcc RTCAPB>, <&rcc RTC>;
clock-names = "pclk", "rtc_ck"; clock-names = "pclk", "rtc_ck";
interrupts-extended = <&intc GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, interrupts-extended = <&exti 19 IRQ_TYPE_LEVEL_HIGH>;
<&exti 19 1>;
status = "disabled"; status = "disabled";
}; };
...@@ -357,18 +425,188 @@ ...@@ -357,18 +425,188 @@
secure-status = "okay"; secure-status = "okay";
}; };
stgen: stgen@5c008000 {
compatible = "st,stm32-stgen";
reg = <0x5C008000 0x1000>;
};
i2c6: i2c@5c009000 { i2c6: i2c@5c009000 {
compatible = "st,stm32f7-i2c"; compatible = "st,stm32mp15-i2c";
reg = <0x5c009000 0x400>; reg = <0x5c009000 0x400>;
interrupt-names = "event", "error", "wakeup"; interrupt-names = "event", "error";
interrupts-extended = <&intc GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, interrupts-extended = <&exti 54 IRQ_TYPE_LEVEL_HIGH>,
<&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
<&exti 54 1>;
clocks = <&rcc I2C6_K>; clocks = <&rcc I2C6_K>;
resets = <&rcc I2C6_R>; resets = <&rcc I2C6_R>;
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
st,syscfg-fmp = <&syscfg 0x4 0x20>;
wakeup-source;
status = "disabled";
};
tamp: tamp@5c00a000 {
compatible = "st,stm32-tamp", "simple-bus", "syscon", "simple-mfd";
reg = <0x5c00a000 0x400>;
secure-interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rcc RTCAPB>;
};
/*
* Break node order to solve dependency probe issue between
* pinctrl and exti.
*/
pinctrl: pin-controller@50002000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,stm32mp157-pinctrl";
ranges = <0 0x50002000 0xa400>;
interrupt-parent = <&exti>;
st,syscfg = <&exti 0x60 0xff>;
pins-are-numbered;
gpioa: gpio@50002000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x0 0x400>;
clocks = <&rcc GPIOA>;
st,bank-name = "GPIOA";
status = "disabled";
};
gpiob: gpio@50003000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x1000 0x400>;
clocks = <&rcc GPIOB>;
st,bank-name = "GPIOB";
status = "disabled";
};
gpioc: gpio@50004000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x2000 0x400>;
clocks = <&rcc GPIOC>;
st,bank-name = "GPIOC";
status = "disabled";
};
gpiod: gpio@50005000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x3000 0x400>;
clocks = <&rcc GPIOD>;
st,bank-name = "GPIOD";
status = "disabled";
};
gpioe: gpio@50006000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x4000 0x400>;
clocks = <&rcc GPIOE>;
st,bank-name = "GPIOE";
status = "disabled";
};
gpiof: gpio@50007000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x5000 0x400>;
clocks = <&rcc GPIOF>;
st,bank-name = "GPIOF";
status = "disabled";
};
gpiog: gpio@50008000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x6000 0x400>;
clocks = <&rcc GPIOG>;
st,bank-name = "GPIOG";
status = "disabled";
};
gpioh: gpio@50009000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x7000 0x400>;
clocks = <&rcc GPIOH>;
st,bank-name = "GPIOH";
status = "disabled";
};
gpioi: gpio@5000a000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x8000 0x400>;
clocks = <&rcc GPIOI>;
st,bank-name = "GPIOI";
status = "disabled";
};
gpioj: gpio@5000b000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x9000 0x400>;
clocks = <&rcc GPIOJ>;
st,bank-name = "GPIOJ";
status = "disabled";
};
gpiok: gpio@5000c000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0xa000 0x400>;
clocks = <&rcc GPIOK>;
st,bank-name = "GPIOK";
status = "disabled";
};
};
pinctrl_z: pin-controller-z@54004000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,stm32mp157-z-pinctrl";
ranges = <0 0x54004000 0x400>;
pins-are-numbered;
interrupt-parent = <&exti>;
st,syscfg = <&exti 0x60 0xff>;
gpioz: gpio@54004000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0 0x400>;
clocks = <&rcc GPIOZ>;
st,bank-name = "GPIOZ";
st,bank-ioport = <11>;
status = "disabled"; status = "disabled";
}; };
}; };
};
}; };
fdts/stm32mp153.dtsi 0 → 100644
View file @ 277d6af5
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
* Copyright (C) STMicroelectronics 2019 - All Rights Reserved
* Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
*/
#include "stm32mp151.dtsi"
/ {
cpus {
cpu1: cpu@1 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <1>;
clocks = <&rcc CK_MPU>;
clock-names = "cpu";
};
};
};
fdts/stm32mp157-pinctrl.dtsi deleted 100644 → 0
View file @ da9a837c
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
* Copyright (C) STMicroelectronics 2017-2019 - All Rights Reserved
* Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
*/
#include <dt-bindings/pinctrl/stm32-pinfunc.h>
/ {
soc {
pinctrl: pin-controller@50002000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,stm32mp157-pinctrl";
ranges = <0 0x50002000 0xa400>;
pins-are-numbered;
gpioa: gpio@50002000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x0 0x400>;
clocks = <&rcc GPIOA>;
st,bank-name = "GPIOA";
status = "disabled";
};
gpiob: gpio@50003000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x1000 0x400>;
clocks = <&rcc GPIOB>;
st,bank-name = "GPIOB";
status = "disabled";
};
gpioc: gpio@50004000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x2000 0x400>;
clocks = <&rcc GPIOC>;
st,bank-name = "GPIOC";
status = "disabled";
};
gpiod: gpio@50005000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x3000 0x400>;
clocks = <&rcc GPIOD>;
st,bank-name = "GPIOD";
status = "disabled";
};
gpioe: gpio@50006000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x4000 0x400>;
clocks = <&rcc GPIOE>;
st,bank-name = "GPIOE";
status = "disabled";
};
gpiof: gpio@50007000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x5000 0x400>;
clocks = <&rcc GPIOF>;
st,bank-name = "GPIOF";
status = "disabled";
};
gpiog: gpio@50008000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x6000 0x400>;
clocks = <&rcc GPIOG>;
st,bank-name = "GPIOG";
status = "disabled";
};
gpioh: gpio@50009000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x7000 0x400>;
clocks = <&rcc GPIOH>;
st,bank-name = "GPIOH";
status = "disabled";
};
gpioi: gpio@5000a000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x8000 0x400>;
clocks = <&rcc GPIOI>;
st,bank-name = "GPIOI";
status = "disabled";
};
gpioj: gpio@5000b000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x9000 0x400>;
clocks = <&rcc GPIOJ>;
st,bank-name = "GPIOJ";
status = "disabled";
};
gpiok: gpio@5000c000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0xa000 0x400>;
clocks = <&rcc GPIOK>;
st,bank-name = "GPIOK";
status = "disabled";
};
fmc_pins_a: fmc-0 {
pins1 {
pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */
<STM32_PINMUX('D', 5, AF12)>, /* FMC_NWE */
<STM32_PINMUX('D', 11, AF12)>, /* FMC_A16_FMC_CLE */
<STM32_PINMUX('D', 12, AF12)>, /* FMC_A17_FMC_ALE */
<STM32_PINMUX('D', 14, AF12)>, /* FMC_D0 */
<STM32_PINMUX('D', 15, AF12)>, /* FMC_D1 */
<STM32_PINMUX('D', 0, AF12)>, /* FMC_D2 */
<STM32_PINMUX('D', 1, AF12)>, /* FMC_D3 */
<STM32_PINMUX('E', 7, AF12)>, /* FMC_D4 */
<STM32_PINMUX('E', 8, AF12)>, /* FMC_D5 */
<STM32_PINMUX('E', 9, AF12)>, /* FMC_D6 */
<STM32_PINMUX('E', 10, AF12)>, /* FMC_D7 */
<STM32_PINMUX('G', 9, AF12)>; /* FMC_NE2_FMC_NCE */
bias-disable;
drive-push-pull;
slew-rate = <1>;
};
pins2 {
pinmux = <STM32_PINMUX('D', 6, AF12)>; /* FMC_NWAIT */
bias-pull-up;
};
};
qspi_bk1_pins_a: qspi-bk1-0 {
pins1 {
pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */
<STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */
<STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */
<STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */
bias-disable;
drive-push-pull;
slew-rate = <1>;
};
pins2 {
pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */
bias-pull-up;
drive-push-pull;
slew-rate = <1>;
};
};
qspi_bk2_pins_a: qspi-bk2-0 {
pins1 {
pinmux = <STM32_PINMUX('H', 2, AF9)>, /* QSPI_BK2_IO0 */
<STM32_PINMUX('H', 3, AF9)>, /* QSPI_BK2_IO1 */
<STM32_PINMUX('G', 10, AF11)>, /* QSPI_BK2_IO2 */
<STM32_PINMUX('G', 7, AF11)>; /* QSPI_BK2_IO3 */
bias-disable;
drive-push-pull;
slew-rate = <1>;
};
pins2 {
pinmux = <STM32_PINMUX('C', 0, AF10)>; /* QSPI_BK2_NCS */
bias-pull-up;
drive-push-pull;
slew-rate = <1>;
};
};
qspi_clk_pins_a: qspi-clk-0 {
pins {
pinmux = <STM32_PINMUX('F', 10, AF9)>; /* QSPI_CLK */
bias-disable;
drive-push-pull;
slew-rate = <3>;
};
};
sdmmc1_b4_pins_a: sdmmc1-b4-0 {
pins1 {
pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
<STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
<STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
<STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
<STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
slew-rate = <1>;
drive-push-pull;
bias-disable;
};
pins2 {
pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
slew-rate = <2>;
drive-push-pull;
bias-disable;
};
};
sdmmc1_dir_pins_a: sdmmc1-dir-0 {
pins1 {
pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */
<STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
<STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */
slew-rate = <1>;
drive-push-pull;
bias-pull-up;
};
pins2{
pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */
bias-pull-up;
};
};
sdmmc2_b4_pins_a: sdmmc2-b4-0 {
pins1 {
pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
<STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
<STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
<STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
<STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
slew-rate = <1>;
drive-push-pull;
bias-pull-up;
};
pins2 {
pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
slew-rate = <2>;
drive-push-pull;
bias-pull-up;
};
};
sdmmc2_d47_pins_a: sdmmc2-d47-0 {
pins {
pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
<STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
<STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */
<STM32_PINMUX('D', 3, AF9)>; /* SDMMC2_D7 */
slew-rate = <1>;
drive-push-pull;
bias-pull-up;
};
};
uart4_pins_a: uart4-0 {
pins1 {
pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
bias-disable;
drive-push-pull;
slew-rate = <0>;
};
pins2 {
pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
bias-disable;
};
};
uart4_pins_b: uart4-1 {
pins1 {
pinmux = <STM32_PINMUX('D', 1, AF8)>; /* UART4_TX */
bias-disable;
drive-push-pull;
slew-rate = <0>;
};
pins2 {
pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
bias-disable;
};
};
uart7_pins_a: uart7-0 {
pins1 {
pinmux = <STM32_PINMUX('E', 8, AF7)>; /* USART7_TX */
bias-disable;
drive-push-pull;
slew-rate = <0>;
};
pins2 {
pinmux = <STM32_PINMUX('E', 7, AF7)>; /* USART7_RX */
bias-disable;
};
};
usart3_pins_a: usart3-0 {
pins1 {
pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
<STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
bias-disable;
drive-push-pull;
slew-rate = <0>;
};
pins2 {
pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
<STM32_PINMUX('I', 10, AF8)>; /* USART3_CTS_NSS */
bias-disable;
};
};
usart3_pins_b: usart3-1 {
pins1 {
pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
<STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
bias-disable;
drive-push-pull;
slew-rate = <0>;
};
pins2 {
pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
<STM32_PINMUX('B', 13, AF7)>; /* USART3_CTS_NSS */
bias-disable;
};
};
};
pinctrl_z: pin-controller-z@54004000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,stm32mp157-z-pinctrl";
ranges = <0 0x54004000 0x400>;
pins-are-numbered;
gpioz: gpio@54004000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0 0x400>;
clocks = <&rcc GPIOZ>;
st,bank-name = "GPIOZ";
st,bank-ioport = <11>;
status = "disabled";
};
i2c4_pins_a: i2c4-0 {
pins {
pinmux = <STM32_PINMUX('Z', 4, AF6)>, /* I2C4_SCL */
<STM32_PINMUX('Z', 5, AF6)>; /* I2C4_SDA */
bias-disable;
drive-open-drain;
slew-rate = <0>;
};
};
};
};
};
fdts/stm32mp157.dtsi 0 → 100644
View file @ 277d6af5
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
* Copyright (C) STMicroelectronics 2019 - All Rights Reserved
* Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
*/
#include "stm32mp153.dtsi"
fdts/stm32mp157a-avenger96.dts
View file @ 277d6af5
...@@ -9,21 +9,30 @@ ...@@ -9,21 +9,30 @@
/dts-v1/; /dts-v1/;
#include "stm32mp157c.dtsi" #include "stm32mp157.dtsi"
#include "stm32mp157cac-pinctrl.dtsi" #include "stm32mp15-pinctrl.dtsi"
#include "stm32mp15xxac-pinctrl.dtsi"
#include <dt-bindings/clock/stm32mp1-clksrc.h>
#include "stm32mp15-ddr3-2x4Gb-1066-binG.dtsi"
/ { / {
model = "Arrow Electronics STM32MP157A Avenger96 board"; model = "Arrow Electronics STM32MP157A Avenger96 board";
compatible = "st,stm32mp157a-avenger96", "st,stm32mp157"; compatible = "arrow,stm32mp157a-avenger96", "st,stm32mp157";
aliases { aliases {
mmc0 = &sdmmc1;
serial0 = &uart4; serial0 = &uart4;
serial1 = &uart7;
}; };
chosen { chosen {
stdout-path = "serial0:115200n8"; stdout-path = "serial0:115200n8";
}; };
memory@c0000000 {
device_type = "memory";
reg = <0xc0000000 0x40000000>;
};
}; };
&i2c4 { &i2c4 {
...@@ -43,16 +52,17 @@ ...@@ -43,16 +52,17 @@
st,main-control-register = <0x04>; st,main-control-register = <0x04>;
st,vin-control-register = <0xc0>; st,vin-control-register = <0xc0>;
st,usb-control-register = <0x20>; st,usb-control-register = <0x30>;
regulators { regulators {
compatible = "st,stpmic1-regulators"; compatible = "st,stpmic1-regulators";
ldo1-supply = <&v3v3>; ldo1-supply = <&v3v3>;
ldo2-supply = <&v3v3>; ldo2-supply = <&v3v3>;
ldo3-supply = <&vdd_ddr>; ldo3-supply = <&vdd_ddr>;
ldo5-supply = <&v3v3>; ldo5-supply = <&v3v3>;
ldo6-supply = <&v3v3>; ldo6-supply = <&v3v3>;
pwr_sw1-supply = <&bst_out>;
pwr_sw2-supply = <&bst_out>;
vddcore: buck1 { vddcore: buck1 {
regulator-name = "vddcore"; regulator-name = "vddcore";
...@@ -135,6 +145,19 @@ ...@@ -135,6 +145,19 @@
regulator-always-on; regulator-always-on;
regulator-over-current-protection; regulator-over-current-protection;
}; };
bst_out: boost {
regulator-name = "bst_out";
};
vbus_otg: pwr_sw1 {
regulator-name = "vbus_otg";
};
vbus_sw: pwr_sw2 {
regulator-name = "vbus_sw";
regulator-active-discharge = <1>;
};
}; };
}; };
}; };
...@@ -142,56 +165,14 @@ ...@@ -142,56 +165,14 @@
&iwdg2 { &iwdg2 {
timeout-sec = <32>; timeout-sec = <32>;
status = "okay"; status = "okay";
secure-status = "okay";
}; };
&rng1 { &pwr_regulators {
status = "okay"; vdd-supply = <&vdd>;
}; vdd_3v3_usbfs-supply = <&vdd_usb>;
&rtc {
status = "okay";
};
&sdmmc1 {
pinctrl-names = "default";
pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
broken-cd;
st,sig-dir;
st,neg-edge;
st,use-ckin;
bus-width = <4>;
vmmc-supply = <&vdda>;
status = "okay";
};
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&uart4_pins_b>;
status = "okay";
};
/* ATF Specific */
#include <dt-bindings/clock/stm32mp1-clksrc.h>
#include "stm32mp15-ddr3-2x4Gb-1066-binG.dtsi"
#include "stm32mp157c-security.dtsi"
/ {
aliases {
gpio0 = &gpioa;
gpio1 = &gpiob;
gpio2 = &gpioc;
gpio3 = &gpiod;
gpio4 = &gpioe;
gpio5 = &gpiof;
gpio6 = &gpiog;
gpio7 = &gpioh;
gpio8 = &gpioi;
gpio25 = &gpioz;
i2c3 = &i2c4;
};
}; };
/* CLOCK init */
&rcc { &rcc {
secure-status = "disabled"; secure-status = "disabled";
st,clksrc = < st,clksrc = <
...@@ -260,24 +241,67 @@ ...@@ -260,24 +241,67 @@
/* VCO = 1300.0 MHz => P = 650 (CPU) */ /* VCO = 1300.0 MHz => P = 650 (CPU) */
pll1: st,pll@0 { pll1: st,pll@0 {
cfg = < 2 80 0 0 0 PQR(1,0,0) >; compatible = "st,stm32mp1-pll";
frac = < 0x800 >; reg = <0>;
cfg = <2 80 0 0 0 PQR(1,0,0)>;
frac = <0x800>;
}; };
/* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */ /* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
pll2: st,pll@1 { pll2: st,pll@1 {
cfg = < 2 65 1 0 0 PQR(1,1,1) >; compatible = "st,stm32mp1-pll";
frac = < 0x1400 >; reg = <1>;
cfg = <2 65 1 0 0 PQR(1,1,1)>;
frac = <0x1400>;
}; };
/* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */ /* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */
pll3: st,pll@2 { pll3: st,pll@2 {
cfg = < 1 33 1 16 36 PQR(1,1,1) >; compatible = "st,stm32mp1-pll";
frac = < 0x1a04 >; reg = <2>;
cfg = <1 33 1 16 36 PQR(1,1,1)>;
frac = <0x1a04>;
}; };
/* VCO = 480.0 MHz => P = 120, Q = 40, R = 96 */ /* VCO = 480.0 MHz => P = 120, Q = 40, R = 96 */
pll4: st,pll@3 { pll4: st,pll@3 {
cfg = < 1 39 3 11 4 PQR(1,1,1) >; compatible = "st,stm32mp1-pll";
reg = <3>;
cfg = <1 39 3 11 4 PQR(1,1,1)>;
}; };
}; };
&rng1 {
status = "okay";
};
&rtc {
status = "okay";
};
&sdmmc1 {
pinctrl-names = "default";
pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
st,sig-dir;
st,neg-edge;
st,use-ckin;
bus-width = <4>;
vmmc-supply = <&vdd_sd>;
status = "okay";
};
&uart4 {
/* On Low speed expansion header */
label = "LS-UART1";
pinctrl-names = "default";
pinctrl-0 = <&uart4_pins_b>;
status = "okay";
};
&uart7 {
/* On Low speed expansion header */
label = "LS-UART0";
pinctrl-names = "default";
pinctrl-0 = <&uart7_pins_a>;
status = "okay";
};
fdts/stm32mp157a-dk1.dts
View file @ 277d6af5
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/* /*
* Copyright (C) STMicroelectronics 2018-2019 - All Rights Reserved * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
* Author: Alexandre Torgue <alexandre.torgue@st.com>. * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
*/ */
/dts-v1/; /dts-v1/;
#include "stm32mp157c.dtsi" #include "stm32mp157.dtsi"
#include "stm32mp157cac-pinctrl.dtsi" #include "stm32mp15-pinctrl.dtsi"
#include "stm32mp15xxac-pinctrl.dtsi"
#include "stm32mp15xx-dkx.dtsi"
/ { / {
model = "STMicroelectronics STM32MP157A-DK1 Discovery Board"; model = "STMicroelectronics STM32MP157A-DK1 Discovery Board";
...@@ -22,290 +24,4 @@ ...@@ -22,290 +24,4 @@
chosen { chosen {
stdout-path = "serial0:115200n8"; stdout-path = "serial0:115200n8";
}; };
};
&clk_hse {
st,digbypass;
};
&i2c4 {
pinctrl-names = "default";
pinctrl-0 = <&i2c4_pins_a>;
i2c-scl-rising-time-ns = <185>;
i2c-scl-falling-time-ns = <20>;
status = "okay";
pmic: stpmic@33 {
compatible = "st,stpmic1";
reg = <0x33>;
interrupts-extended = <&exti_pwr 55 IRQ_TYPE_EDGE_FALLING>;
interrupt-controller;
#interrupt-cells = <2>;
status = "okay";
st,main-control-register = <0x04>;
st,vin-control-register = <0xc0>;
st,usb-control-register = <0x20>;
regulators {
compatible = "st,stpmic1-regulators";
ldo1-supply = <&v3v3>;
ldo3-supply = <&vdd_ddr>;
ldo6-supply = <&v3v3>;
vddcore: buck1 {
regulator-name = "vddcore";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-initial-mode = <0>;
regulator-over-current-protection;
};
vdd_ddr: buck2 {
regulator-name = "vdd_ddr";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-initial-mode = <0>;
regulator-over-current-protection;
};
vdd: buck3 {
regulator-name = "vdd";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
st,mask-reset;
regulator-initial-mode = <0>;
regulator-over-current-protection;
};
v3v3: buck4 {
regulator-name = "v3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-over-current-protection;
regulator-initial-mode = <0>;
};
v1v8_audio: ldo1 {
regulator-name = "v1v8_audio";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
v3v3_hdmi: ldo2 {
regulator-name = "v3v3_hdmi";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vtt_ddr: ldo3 {
regulator-name = "vtt_ddr";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <750000>;
regulator-always-on;
regulator-over-current-protection;
};
vdd_usb: ldo4 {
regulator-name = "vdd_usb";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
vdda: ldo5 {
regulator-name = "vdda";
regulator-min-microvolt = <2900000>;
regulator-max-microvolt = <2900000>;
regulator-boot-on;
};
v1v2_hdmi: ldo6 {
regulator-name = "v1v2_hdmi";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
vref_ddr: vref_ddr {
regulator-name = "vref_ddr";
regulator-always-on;
regulator-over-current-protection;
};
};
};
};
&iwdg2 {
timeout-sec = <32>;
status = "okay";
};
&pwr {
pwr-regulators {
vdd-supply = <&vdd>;
};
};
&rng1 {
status = "okay";
};
&rtc {
status = "okay";
};
&sdmmc1 {
pinctrl-names = "default";
pinctrl-0 = <&sdmmc1_b4_pins_a>;
broken-cd;
st,neg-edge;
bus-width = <4>;
vmmc-supply = <&v3v3>;
status = "okay";
};
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&uart4_pins_a>;
status = "okay";
};
&uart7 {
pinctrl-names = "default";
pinctrl-0 = <&uart7_pins_a>;
status = "disabled";
};
&usart3 {
pinctrl-names = "default";
pinctrl-0 = <&usart3_pins_b>;
status = "disabled";
};
/* ATF Specific */
#include <dt-bindings/clock/stm32mp1-clksrc.h>
#include "stm32mp15-ddr3-1x4Gb-1066-binG.dtsi"
#include "stm32mp157c-security.dtsi"
/ {
aliases {
gpio0 = &gpioa;
gpio1 = &gpiob;
gpio2 = &gpioc;
gpio3 = &gpiod;
gpio4 = &gpioe;
gpio5 = &gpiof;
gpio6 = &gpiog;
gpio7 = &gpioh;
gpio8 = &gpioi;
gpio25 = &gpioz;
i2c3 = &i2c4;
};
};
/* CLOCK init */
&rcc {
secure-status = "disabled";
st,clksrc = <
CLK_MPU_PLL1P
CLK_AXI_PLL2P
CLK_MCU_PLL3P
CLK_PLL12_HSE
CLK_PLL3_HSE
CLK_PLL4_HSE
CLK_RTC_LSE
CLK_MCO1_DISABLED
CLK_MCO2_DISABLED
>;
st,clkdiv = <
1 /*MPU*/
0 /*AXI*/
0 /*MCU*/
1 /*APB1*/
1 /*APB2*/
1 /*APB3*/
1 /*APB4*/
2 /*APB5*/
23 /*RTC*/
0 /*MCO1*/
0 /*MCO2*/
>;
st,pkcs = <
CLK_CKPER_HSE
CLK_FMC_ACLK
CLK_QSPI_ACLK
CLK_ETH_DISABLED
CLK_SDMMC12_PLL4P
CLK_DSI_DSIPLL
CLK_STGEN_HSE
CLK_USBPHY_HSE
CLK_SPI2S1_PLL3Q
CLK_SPI2S23_PLL3Q
CLK_SPI45_HSI
CLK_SPI6_HSI
CLK_I2C46_HSI
CLK_SDMMC3_PLL4P
CLK_USBO_USBPHY
CLK_ADC_CKPER
CLK_CEC_LSE
CLK_I2C12_HSI
CLK_I2C35_HSI
CLK_UART1_HSI
CLK_UART24_HSI
CLK_UART35_HSI
CLK_UART6_HSI
CLK_UART78_HSI
CLK_SPDIF_PLL4P
CLK_FDCAN_PLL4R
CLK_SAI1_PLL3Q
CLK_SAI2_PLL3Q
CLK_SAI3_PLL3Q
CLK_SAI4_PLL3Q
CLK_RNG1_LSI
CLK_RNG2_LSI
CLK_LPTIM1_PCLK1
CLK_LPTIM23_PCLK3
CLK_LPTIM45_LSE
>;
/* VCO = 1300.0 MHz => P = 650 (CPU) */
pll1: st,pll@0 {
cfg = < 2 80 0 0 0 PQR(1,0,0) >;
frac = < 0x800 >;
};
/* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
pll2: st,pll@1 {
cfg = < 2 65 1 0 0 PQR(1,1,1) >;
frac = < 0x1400 >;
};
/* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */
pll3: st,pll@2 {
cfg = < 1 33 1 16 36 PQR(1,1,1) >;
frac = < 0x1a04 >;
};
/* VCO = 594.0 MHz => P = 99, Q = 74, R = 74 */
pll4: st,pll@3 {
cfg = < 3 98 5 7 7 PQR(1,1,1) >;
};
};
&bsec {
board_id: board_id@ec {
reg = <0xec 0x4>;
status = "okay";
secure-status = "okay";
};
}; };
fdts/stm32mp157c-dk2.dts
View file @ 277d6af5
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/* /*
* Copyright (C) STMicroelectronics 2018 - All Rights Reserved * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
* Author: Alexandre Torgue <alexandre.torgue@st.com>. * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
*/ */
/dts-v1/; /dts-v1/;
#include "stm32mp157a-dk1.dts" #include "stm32mp157.dtsi"
#include "stm32mp15xc.dtsi"
#include "stm32mp15-pinctrl.dtsi"
#include "stm32mp15xxac-pinctrl.dtsi"
#include "stm32mp15xx-dkx.dtsi"
/ { / {
model = "STMicroelectronics STM32MP157C-DK2 Discovery Board"; model = "STMicroelectronics STM32MP157C-DK2 Discovery Board";
compatible = "st,stm32mp157c-dk2", "st,stm32mp157"; compatible = "st,stm32mp157c-dk2", "st,stm32mp157";
aliases {
serial0 = &uart4;
serial1 = &usart3;
serial2 = &uart7;
serial3 = &usart2;
};
chosen {
stdout-path = "serial0:115200n8";
};
}; };
&cryp1 {
status = "okay";
};
fdts/stm32mp157c-ed1.dts
View file @ 277d6af5
...@@ -5,8 +5,12 @@ ...@@ -5,8 +5,12 @@
*/ */
/dts-v1/; /dts-v1/;
#include "stm32mp157c.dtsi" #include "stm32mp157.dtsi"
#include "stm32mp157caa-pinctrl.dtsi" #include "stm32mp15xc.dtsi"
#include "stm32mp15-pinctrl.dtsi"
#include "stm32mp15xxaa-pinctrl.dtsi"
#include <dt-bindings/clock/stm32mp1-clksrc.h>
#include "stm32mp15-ddr3-2x4Gb-1066-binG.dtsi"
/ { / {
model = "STMicroelectronics STM32MP157C eval daughter"; model = "STMicroelectronics STM32MP157C eval daughter";
...@@ -16,20 +20,47 @@ ...@@ -16,20 +20,47 @@
stdout-path = "serial0:115200n8"; stdout-path = "serial0:115200n8";
}; };
memory@c0000000 {
device_type = "memory";
reg = <0xC0000000 0x40000000>;
};
aliases { aliases {
serial0 = &uart4; serial0 = &uart4;
}; };
}; };
&bsec {
board_id: board_id@ec {
reg = <0xec 0x4>;
status = "okay";
secure-status = "okay";
};
};
&clk_hse { &clk_hse {
st,digbypass; st,digbypass;
}; };
&cpu0 {
cpu-supply = <&vddcore>;
};
&cpu1 {
cpu-supply = <&vddcore>;
};
&cryp1 {
status="okay";
};
&i2c4 { &i2c4 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&i2c4_pins_a>; pinctrl-0 = <&i2c4_pins_a>;
i2c-scl-rising-time-ns = <185>; i2c-scl-rising-time-ns = <185>;
i2c-scl-falling-time-ns = <20>; i2c-scl-falling-time-ns = <20>;
clock-frequency = <400000>;
status = "okay"; status = "okay";
pmic: stpmic@33 { pmic: stpmic@33 {
...@@ -40,18 +71,15 @@ ...@@ -40,18 +71,15 @@
#interrupt-cells = <2>; #interrupt-cells = <2>;
status = "okay"; status = "okay";
st,main-control-register = <0x04>;
st,vin-control-register = <0xc0>;
st,usb-control-register = <0x20>;
regulators { regulators {
compatible = "st,stpmic1-regulators"; compatible = "st,stpmic1-regulators";
ldo1-supply = <&v3v3>; ldo1-supply = <&v3v3>;
ldo2-supply = <&v3v3>; ldo2-supply = <&v3v3>;
ldo3-supply = <&vdd_ddr>; ldo3-supply = <&vdd_ddr>;
ldo5-supply = <&v3v3>; ldo5-supply = <&v3v3>;
ldo6-supply = <&v3v3>; ldo6-supply = <&v3v3>;
pwr_sw1-supply = <&bst_out>;
pwr_sw2-supply = <&bst_out>;
vddcore: buck1 { vddcore: buck1 {
regulator-name = "vddcore"; regulator-name = "vddcore";
...@@ -112,8 +140,6 @@ ...@@ -112,8 +140,6 @@
vdd_usb: ldo4 { vdd_usb: ldo4 {
regulator-name = "vdd_usb"; regulator-name = "vdd_usb";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
}; };
vdd_sd: ldo5 { vdd_sd: ldo5 {
...@@ -132,92 +158,45 @@ ...@@ -132,92 +158,45 @@
vref_ddr: vref_ddr { vref_ddr: vref_ddr {
regulator-name = "vref_ddr"; regulator-name = "vref_ddr";
regulator-always-on; regulator-always-on;
regulator-over-current-protection;
}; };
};
};
};
&iwdg2 {
timeout-sec = <32>;
status = "okay";
};
&pwr { bst_out: boost {
pwr-regulators { regulator-name = "bst_out";
vdd-supply = <&vdd>;
}; };
};
&rng1 { vbus_otg: pwr_sw1 {
status = "okay"; regulator-name = "vbus_otg";
}; };
&rtc { vbus_sw: pwr_sw2 {
status = "okay"; regulator-name = "vbus_sw";
}; regulator-active-discharge = <1>;
};
};
&sdmmc1 { onkey {
pinctrl-names = "default"; compatible = "st,stpmic1-onkey";
pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>; power-off-time-sec = <10>;
broken-cd;
st,sig-dir;
st,neg-edge;
st,use-ckin;
bus-width = <4>;
vmmc-supply = <&vdd_sd>;
sd-uhs-sdr12;
sd-uhs-sdr25;
sd-uhs-sdr50;
sd-uhs-ddr50;
sd-uhs-sdr104;
status = "okay"; status = "okay";
}; };
&sdmmc2 { watchdog {
pinctrl-names = "default"; compatible = "st,stpmic1-wdt";
pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>; status = "disabled";
non-removable; };
no-sd; };
no-sdio;
st,neg-edge;
bus-width = <8>;
vmmc-supply = <&v3v3>;
vqmmc-supply = <&v3v3>;
mmc-ddr-3_3v;
status = "okay";
}; };
&uart4 { &iwdg2 {
pinctrl-names = "default"; timeout-sec = <32>;
pinctrl-0 = <&uart4_pins_a>;
status = "okay"; status = "okay";
}; };
/* ATF Specific */ &pwr_regulators {
#include <dt-bindings/clock/stm32mp1-clksrc.h> vdd-supply = <&vdd>;
#include "stm32mp15-ddr3-2x4Gb-1066-binG.dtsi" vdd_3v3_usbfs-supply = <&vdd_usb>;
#include "stm32mp157c-security.dtsi"
/ {
aliases {
gpio0 = &gpioa;
gpio1 = &gpiob;
gpio2 = &gpioc;
gpio3 = &gpiod;
gpio4 = &gpioe;
gpio5 = &gpiof;
gpio6 = &gpiog;
gpio7 = &gpioh;
gpio8 = &gpioi;
gpio9 = &gpioj;
gpio10 = &gpiok;
gpio25 = &gpioz;
i2c3 = &i2c4;
};
}; };
/* CLOCK init */
&rcc { &rcc {
secure-status = "disabled"; secure-status = "disabled";
st,clksrc = < st,clksrc = <
...@@ -308,10 +287,46 @@ ...@@ -308,10 +287,46 @@
}; };
}; };
&bsec { &rng1 {
board_id: board_id@ec { status = "okay";
reg = <0xec 0x4>; };
&rtc {
status = "okay";
};
&sdmmc1 {
pinctrl-names = "default";
pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
disable-wp;
st,sig-dir;
st,neg-edge;
st,use-ckin;
bus-width = <4>;
vmmc-supply = <&vdd_sd>;
sd-uhs-sdr12;
sd-uhs-sdr25;
sd-uhs-sdr50;
sd-uhs-ddr50;
status = "okay";
};
&sdmmc2 {
pinctrl-names = "default";
pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>;
non-removable;
no-sd;
no-sdio;
st,neg-edge;
bus-width = <8>;
vmmc-supply = <&v3v3>;
vqmmc-supply = <&vdd>;
mmc-ddr-3_3v;
status = "okay";
};
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&uart4_pins_a>;
status = "okay"; status = "okay";
secure-status = "okay";
};
}; };
fdts/stm32mp157c-security.dtsi deleted 100644 → 0
View file @ da9a837c
/*
* Copyright (c) 2017-2019, STMicroelectronics - All Rights Reserved
*
* SPDX-License-Identifier: GPL-2.0+ BSD-3-Clause
*/
/ {
soc {
stgen: stgen@5c008000 {
compatible = "st,stm32-stgen";
reg = <0x5C008000 0x1000>;
status = "okay";
};
};
};
&bsec {
mac_addr: mac_addr@e4 {
reg = <0xe4 0x6>;
status = "okay";
secure-status = "okay";
};
/* Spare field to align on 32-bit OTP granularity */
spare_ns_ea: spare_ns_ea@ea {
reg = <0xea 0x2>;
status = "okay";
secure-status = "okay";
};
};
&hash1 {
secure-status = "okay";
};
&sdmmc1 {
compatible = "st,stm32-sdmmc2";
};
&sdmmc2 {
compatible = "st,stm32-sdmmc2";
};
fdts/stm32mp157caa-pinctrl.dtsi deleted 100644 → 0
View file @ da9a837c
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
* Copyright (C) STMicroelectronics 2018 - All Rights Reserved
* Author: Alexandre Torgue <alexandre.torgue@st.com>
*/
#include "stm32mp157-pinctrl.dtsi"
/ {
soc {
pinctrl: pin-controller@50002000 {
st,package = <STM32MP157CAA>;
gpioa: gpio@50002000 {
status = "okay";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 0 16>;
};
gpiob: gpio@50003000 {
status = "okay";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 16 16>;
};
gpioc: gpio@50004000 {
status = "okay";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 32 16>;
};
gpiod: gpio@50005000 {
status = "okay";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 48 16>;
};
gpioe: gpio@50006000 {
status = "okay";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 64 16>;
};
gpiof: gpio@50007000 {
status = "okay";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 80 16>;
};
gpiog: gpio@50008000 {
status = "okay";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 96 16>;
};
gpioh: gpio@50009000 {
status = "okay";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 112 16>;
};
gpioi: gpio@5000a000 {
status = "okay";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 128 16>;
};
gpioj: gpio@5000b000 {
status = "okay";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 144 16>;
};
gpiok: gpio@5000c000 {
status = "okay";
ngpios = <8>;
gpio-ranges = <&pinctrl 0 160 8>;
};
};
pinctrl_z: pin-controller-z@54004000 {
st,package = <STM32MP157CAA>;
gpioz: gpio@54004000 {
status = "okay";
ngpios = <8>;
gpio-ranges = <&pinctrl_z 0 400 8>;
};
};
};
};
fdts/stm32mp157cac-pinctrl.dtsi deleted 100644 → 0
View file @ da9a837c
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
* Copyright (C) STMicroelectronics 2018 - All Rights Reserved
* Author: Alexandre Torgue <alexandre.torgue@st.com>
*/
#include "stm32mp157-pinctrl.dtsi"
/ {
soc {
pinctrl: pin-controller@50002000 {
st,package = <STM32MP157CAC>;
gpioa: gpio@50002000 {
status = "okay";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 0 16>;
};
gpiob: gpio@50003000 {
status = "okay";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 16 16>;
};
gpioc: gpio@50004000 {
status = "okay";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 32 16>;
};
gpiod: gpio@50005000 {
status = "okay";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 48 16>;
};
gpioe: gpio@50006000 {
status = "okay";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 64 16>;
};
gpiof: gpio@50007000 {
status = "okay";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 80 16>;
};
gpiog: gpio@50008000 {
status = "okay";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 96 16>;
};
gpioh: gpio@50009000 {
status = "okay";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 112 16>;
};
gpioi: gpio@5000a000 {
status = "okay";
ngpios = <12>;
gpio-ranges = <&pinctrl 0 128 12>;
};
};
pinctrl_z: pin-controller-z@54004000 {
st,package = <STM32MP157CAC>;
gpioz: gpio@54004000 {
status = "okay";
ngpios = <8>;
gpio-ranges = <&pinctrl_z 0 400 8>;
};
};
};
};
fdts/stm32mp15xc.dtsi 0 → 100644
View file @ 277d6af5
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
* Copyright (C) STMicroelectronics 2019 - All Rights Reserved
* Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
*/
/ {
soc {
cryp1: cryp@54001000 {
compatible = "st,stm32mp1-cryp";
reg = <0x54001000 0x400>;
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rcc CRYP1>;
resets = <&rcc CRYP1_R>;
status = "disabled";
};
};
};
fdts/stm32mp15xx-dkx.dtsi 0 → 100644
View file @ 277d6af5
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
* Copyright (C) STMicroelectronics 2019 - All Rights Reserved
* Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
*/
#include <dt-bindings/clock/stm32mp1-clksrc.h>
#include "stm32mp15-ddr3-1x4Gb-1066-binG.dtsi"
/ {
memory@c0000000 {
device_type = "memory";
reg = <0xc0000000 0x20000000>;
};
vin: vin {
compatible = "regulator-fixed";
regulator-name = "vin";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
};
&bsec {
board_id: board_id@ec {
reg = <0xec 0x4>;
st,non-secure-otp;
};
};
&clk_hse {
st,digbypass;
};
&cpu0{
cpu-supply = <&vddcore>;
};
&cpu1{
cpu-supply = <&vddcore>;
};
&hash1 {
status = "okay";
};
&i2c4 {
pinctrl-names = "default";
pinctrl-0 = <&i2c4_pins_a>;
i2c-scl-rising-time-ns = <185>;
i2c-scl-falling-time-ns = <20>;
clock-frequency = <400000>;
status = "okay";
pmic: stpmic@33 {
compatible = "st,stpmic1";
reg = <0x33>;
interrupts-extended = <&exti_pwr 55 IRQ_TYPE_EDGE_FALLING>;
interrupt-controller;
#interrupt-cells = <2>;
status = "okay";
regulators {
compatible = "st,stpmic1-regulators";
buck1-supply = <&vin>;
buck2-supply = <&vin>;
buck3-supply = <&vin>;
buck4-supply = <&vin>;
ldo1-supply = <&v3v3>;
ldo2-supply = <&vin>;
ldo3-supply = <&vdd_ddr>;
ldo4-supply = <&vin>;
ldo5-supply = <&vin>;
ldo6-supply = <&v3v3>;
vref_ddr-supply = <&vin>;
boost-supply = <&vin>;
pwr_sw1-supply = <&bst_out>;
pwr_sw2-supply = <&bst_out>;
vddcore: buck1 {
regulator-name = "vddcore";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-initial-mode = <0>;
regulator-over-current-protection;
};
vdd_ddr: buck2 {
regulator-name = "vdd_ddr";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-initial-mode = <0>;
regulator-over-current-protection;
};
vdd: buck3 {
regulator-name = "vdd";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
st,mask-reset;
regulator-initial-mode = <0>;
regulator-over-current-protection;
};
v3v3: buck4 {
regulator-name = "v3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-over-current-protection;
regulator-initial-mode = <0>;
};
v1v8_audio: ldo1 {
regulator-name = "v1v8_audio";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
v3v3_hdmi: ldo2 {
regulator-name = "v3v3_hdmi";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vtt_ddr: ldo3 {
regulator-name = "vtt_ddr";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <750000>;
regulator-always-on;
regulator-over-current-protection;
};
vdd_usb: ldo4 {
regulator-name = "vdd_usb";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vdda: ldo5 {
regulator-name = "vdda";
regulator-min-microvolt = <2900000>;
regulator-max-microvolt = <2900000>;
regulator-boot-on;
};
v1v2_hdmi: ldo6 {
regulator-name = "v1v2_hdmi";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
vref_ddr: vref_ddr {
regulator-name = "vref_ddr";
regulator-always-on;
regulator-over-current-protection;
};
bst_out: boost {
regulator-name = "bst_out";
};
vbus_otg: pwr_sw1 {
regulator-name = "vbus_otg";
};
vbus_sw: pwr_sw2 {
regulator-name = "vbus_sw";
regulator-active-discharge = <1>;
};
};
};
};
&iwdg2 {
timeout-sec = <32>;
status = "okay";
secure-status = "okay";
};
&pwr_regulators {
vdd-supply = <&vdd>;
vdd_3v3_usbfs-supply = <&vdd_usb>;
};
&rcc {
secure-status = "disabled";
st,clksrc = <
CLK_MPU_PLL1P
CLK_AXI_PLL2P
CLK_MCU_PLL3P
CLK_PLL12_HSE
CLK_PLL3_HSE
CLK_PLL4_HSE
CLK_RTC_LSE
CLK_MCO1_DISABLED
CLK_MCO2_DISABLED
>;
st,clkdiv = <
1 /*MPU*/
0 /*AXI*/
0 /*MCU*/
1 /*APB1*/
1 /*APB2*/
1 /*APB3*/
1 /*APB4*/
2 /*APB5*/
23 /*RTC*/
0 /*MCO1*/
0 /*MCO2*/
>;
st,pkcs = <
CLK_CKPER_HSE
CLK_FMC_ACLK
CLK_QSPI_ACLK
CLK_ETH_DISABLED
CLK_SDMMC12_PLL4P
CLK_DSI_DSIPLL
CLK_STGEN_HSE
CLK_USBPHY_HSE
CLK_SPI2S1_PLL3Q
CLK_SPI2S23_PLL3Q
CLK_SPI45_HSI
CLK_SPI6_HSI
CLK_I2C46_HSI
CLK_SDMMC3_PLL4P
CLK_USBO_USBPHY
CLK_ADC_CKPER
CLK_CEC_LSE
CLK_I2C12_HSI
CLK_I2C35_HSI
CLK_UART1_HSI
CLK_UART24_HSI
CLK_UART35_HSI
CLK_UART6_HSI
CLK_UART78_HSI
CLK_SPDIF_PLL4P
CLK_FDCAN_PLL4R
CLK_SAI1_PLL3Q
CLK_SAI2_PLL3Q
CLK_SAI3_PLL3Q
CLK_SAI4_PLL3Q
CLK_RNG1_LSI
CLK_RNG2_LSI
CLK_LPTIM1_PCLK1
CLK_LPTIM23_PCLK3
CLK_LPTIM45_LSE
>;
/* VCO = 1300.0 MHz => P = 650 (CPU) */
pll1: st,pll@0 {
compatible = "st,stm32mp1-pll";
reg = <0>;
cfg = < 2 80 0 0 0 PQR(1,0,0) >;
frac = < 0x800 >;
};
/* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
pll2: st,pll@1 {
compatible = "st,stm32mp1-pll";
reg = <1>;
cfg = <2 65 1 0 0 PQR(1,1,1)>;
frac = <0x1400>;
};
/* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */
pll3: st,pll@2 {
compatible = "st,stm32mp1-pll";
reg = <2>;
cfg = <1 33 1 16 36 PQR(1,1,1)>;
frac = <0x1a04>;
};
/* VCO = 594.0 MHz => P = 99, Q = 74, R = 74 */
pll4: st,pll@3 {
compatible = "st,stm32mp1-pll";
reg = <3>;
cfg = <3 98 5 7 7 PQR(1,1,1)>;
};
};
&rng1 {
status = "okay";
};
&rtc {
status = "okay";
};
&sdmmc1 {
pinctrl-names = "default";
pinctrl-0 = <&sdmmc1_b4_pins_a>;
disable-wp;
st,neg-edge;
bus-width = <4>;
vmmc-supply = <&v3v3>;
status = "okay";
};
&timers15 {
secure-status = "okay";
};
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&uart4_pins_a>;
status = "okay";
};
&uart7 {
pinctrl-names = "default";
pinctrl-0 = <&uart7_pins_b>;
status = "disabled";
};
&usart3 {
pinctrl-names = "default";
pinctrl-0 = <&usart3_pins_b>;
uart-has-rtscts;
status = "disabled";
};
&usbotg_hs {
phys = <&usbphyc_port1 0>;
phy-names = "usb2-phy";
usb-role-switch;
status = "okay";
};
&usbphyc {
status = "okay";
};
&usbphyc_port0 {
phy-supply = <&vdd_usb>;
};
&usbphyc_port1 {
phy-supply = <&vdd_usb>;
};
fdts/stm32mp15xxaa-pinctrl.dtsi 0 → 100644
View file @ 277d6af5
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
* Copyright (C) STMicroelectronics 2019 - All Rights Reserved
* Author: Alexandre Torgue <alexandre.torgue@st.com>
*/
&pinctrl {
st,package = <STM32MP_PKG_AA>;
gpioa: gpio@50002000 {
status = "okay";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 0 16>;
};
gpiob: gpio@50003000 {
status = "okay";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 16 16>;
};
gpioc: gpio@50004000 {
status = "okay";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 32 16>;
};
gpiod: gpio@50005000 {
status = "okay";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 48 16>;
};
gpioe: gpio@50006000 {
status = "okay";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 64 16>;
};
gpiof: gpio@50007000 {
status = "okay";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 80 16>;
};
gpiog: gpio@50008000 {
status = "okay";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 96 16>;
};
gpioh: gpio@50009000 {
status = "okay";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 112 16>;
};
gpioi: gpio@5000a000 {
status = "okay";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 128 16>;
};
gpioj: gpio@5000b000 {
status = "okay";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 144 16>;
};
gpiok: gpio@5000c000 {
status = "okay";
ngpios = <8>;
gpio-ranges = <&pinctrl 0 160 8>;
};
};
&pinctrl_z {
st,package = <STM32MP_PKG_AA>;
gpioz: gpio@54004000 {
status = "okay";
ngpios = <8>;
gpio-ranges = <&pinctrl_z 0 400 8>;
};
};
fdts/stm32mp15xxab-pinctrl.dtsi 0 → 100644
View file @ 277d6af5
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
* Copyright (C) STMicroelectronics 2019 - All Rights Reserved
* Author: Alexandre Torgue <alexandre.torgue@st.com>
*/
&pinctrl {
st,package = <STM32MP_PKG_AB>;
gpioa: gpio@50002000 {
status = "okay";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 0 16>;
};
gpiob: gpio@50003000 {
status = "okay";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 16 16>;
};
gpioc: gpio@50004000 {
status = "okay";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 32 16>;
};
gpiod: gpio@50005000 {
status = "okay";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 48 16>;
};
gpioe: gpio@50006000 {
status = "okay";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 64 16>;
};
gpiof: gpio@50007000 {
status = "okay";
ngpios = <6>;
gpio-ranges = <&pinctrl 6 86 6>;
};
gpiog: gpio@50008000 {
status = "okay";
ngpios = <10>;
gpio-ranges = <&pinctrl 6 102 10>;
};
gpioh: gpio@50009000 {
status = "okay";
ngpios = <2>;
gpio-ranges = <&pinctrl 0 112 2>;
};
};
fdts/stm32mp15xxac-pinctrl.dtsi 0 → 100644
View file @ 277d6af5
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
* Copyright (C) STMicroelectronics 2019 - All Rights Reserved
* Author: Alexandre Torgue <alexandre.torgue@st.com>
*/
&pinctrl {
st,package = <STM32MP_PKG_AC>;
gpioa: gpio@50002000 {
status = "okay";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 0 16>;
};
gpiob: gpio@50003000 {
status = "okay";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 16 16>;
};
gpioc: gpio@50004000 {
status = "okay";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 32 16>;
};
gpiod: gpio@50005000 {
status = "okay";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 48 16>;
};
gpioe: gpio@50006000 {
status = "okay";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 64 16>;
};
gpiof: gpio@50007000 {
status = "okay";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 80 16>;
};
gpiog: gpio@50008000 {
status = "okay";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 96 16>;
};
gpioh: gpio@50009000 {
status = "okay";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 112 16>;
};
gpioi: gpio@5000a000 {
status = "okay";
ngpios = <12>;
gpio-ranges = <&pinctrl 0 128 12>;
};
};
&pinctrl_z {
st,package = <STM32MP_PKG_AC>;
gpioz: gpio@54004000 {
status = "okay";
ngpios = <8>;
gpio-ranges = <&pinctrl_z 0 400 8>;
};
};
fdts/stm32mp15xxad-pinctrl.dtsi 0 → 100644
View file @ 277d6af5
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
* Copyright (C) STMicroelectronics 2019 - All Rights Reserved
* Author: Alexandre Torgue <alexandre.torgue@st.com>
*/
&pinctrl {
st,package = <STM32MP_PKG_AD>;
gpioa: gpio@50002000 {
status = "okay";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 0 16>;
};
gpiob: gpio@50003000 {
status = "okay";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 16 16>;
};
gpioc: gpio@50004000 {
status = "okay";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 32 16>;
};
gpiod: gpio@50005000 {
status = "okay";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 48 16>;
};
gpioe: gpio@50006000 {
status = "okay";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 64 16>;
};
gpiof: gpio@50007000 {
status = "okay";
ngpios = <6>;
gpio-ranges = <&pinctrl 6 86 6>;
};
gpiog: gpio@50008000 {
status = "okay";
ngpios = <10>;
gpio-ranges = <&pinctrl 6 102 10>;
};
gpioh: gpio@50009000 {
status = "okay";
ngpios = <2>;
gpio-ranges = <&pinctrl 0 112 2>;
};
};
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment