Merge pull request #1587 from antonio-nino-diaz-arm/an/deprecated

Remove deprecated interfaces for all platforms

include/lib/smccc_v1.h

@@ -66,9 +66,6 @@
 #define SMC_32				U(0)
 
 #define SMC_TYPE_FAST			ULL(1)
-#if !ERROR_DEPRECATED
-#define SMC_TYPE_STD			ULL(0)
-#endif
 #define SMC_TYPE_YIELD			ULL(0)
 
 #define SMC_OK				ULL(0)

include/lib/utils.h

@@ -7,10 +7,6 @@
 #ifndef __UTILS_H__
 #define __UTILS_H__
 
-#if !ERROR_DEPRECATED
-#include <utils_def.h>
-#endif
-
 /*
  * C code should be put in this part of the header to avoid breaking ASM files
  * or linker scripts including it.

include/lib/xlat_tables/xlat_mmu_helpers.h

@@ -67,11 +67,6 @@ void setup_mmu_cfg(uint64_t *params, unsigned int flags,
 
 #ifdef AARCH32
 /* AArch32 specific translation table API */
-#if !ERROR_DEPRECATED
-void enable_mmu_secure(unsigned int flags);
-void enable_mmu_direct(unsigned int flags);
-#endif
-
 void enable_mmu_svc_mon(unsigned int flags);
 void enable_mmu_hyp(unsigned int flags);
 

include/lib/xlat_tables/xlat_tables.h

@@ -71,10 +71,6 @@
 #define MT_CODE			(MT_MEMORY | MT_RO | MT_EXECUTE)
 #define MT_RO_DATA		(MT_MEMORY | MT_RO | MT_EXECUTE_NEVER)
 
-#if !ERROR_DEPRECATED
-typedef unsigned int mmap_attr_t;
-#endif
-
 /*
  * Structure for specifying a single region of memory.
  */

include/lib/xlat_tables/xlat_tables_v2.h

@@ -104,10 +104,6 @@
 #define MT_RO_DATA		(MT_MEMORY | MT_RO | MT_EXECUTE_NEVER)
 #define MT_RW_DATA		(MT_MEMORY | MT_RW | MT_EXECUTE_NEVER)
 
-#if !ERROR_DEPRECATED
-typedef unsigned int mmap_attr_t;
-#endif
-
 /*
  * Structure for specifying a single region of memory.
  */

include/plat/arm/common/arm_def.h

@@ -165,21 +165,6 @@
 #define ARM_IRQ_SEC_SGI_6		14
 #define ARM_IRQ_SEC_SGI_7		15
 
-/*
- * List of secure interrupts are deprecated, but are retained only to support
- * legacy configurations.
- */
-#define ARM_G1S_IRQS			ARM_IRQ_SEC_PHY_TIMER,		\
-					ARM_IRQ_SEC_SGI_1,		\
-					ARM_IRQ_SEC_SGI_2,		\
-					ARM_IRQ_SEC_SGI_3,		\
-					ARM_IRQ_SEC_SGI_4,		\
-					ARM_IRQ_SEC_SGI_5,		\
-					ARM_IRQ_SEC_SGI_7
-
-#define ARM_G0_IRQS			ARM_IRQ_SEC_SGI_0,		\
-					ARM_IRQ_SEC_SGI_6
-
 /*
  * Define a list of Group 1 Secure and Group 0 interrupt properties as per GICv3
  * terminology. On a GICv2 system or mode, the lists will be merged and treated

include/plat/arm/common/plat_arm.h

@@ -17,7 +17,6 @@
 /*******************************************************************************
  * Forward declarations
  ******************************************************************************/
-struct bl31_params;
 struct meminfo;
 struct image_info;
 struct bl_params;
@@ -197,13 +196,8 @@ void arm_bl2u_platform_setup(void);
 void arm_bl2u_plat_arch_setup(void);
 
 /* BL31 utility functions */
-#if LOAD_IMAGE_V2
 void arm_bl31_early_platform_setup(void *from_bl2, uintptr_t soc_fw_config,
 				uintptr_t hw_config, void *plat_params_from_bl2);
-#else
-void arm_bl31_early_platform_setup(struct bl31_params *from_bl2, uintptr_t soc_fw_config,
-				uintptr_t hw_config, void *plat_params_from_bl2);
-#endif /* LOAD_IMAGE_V2 */
 void arm_bl31_platform_setup(void);
 void arm_bl31_plat_runtime_setup(void);
 void arm_bl31_plat_arch_setup(void);
@@ -252,13 +246,11 @@ void plat_arm_error_handler(int err);
 unsigned int plat_arm_get_cpu_pe_count(u_register_t mpidr);
 #endif
 
-#if LOAD_IMAGE_V2
 /*
  * This function is called after loading SCP_BL2 image and it is used to perform
  * any platform-specific actions required to handle the SCP firmware.
  */
 int plat_arm_bl2_handle_scp_bl2(struct image_info *scp_bl2_image_info);
-#endif
 
 /*
  * Optional functions required in ARM standard platforms

include/plat/common/common_def.h

@@ -31,7 +31,6 @@
  */
 #define FIRMWARE_WELCOME_STR		"Booting Trusted Firmware\n"
 
-#if LOAD_IMAGE_V2
 #define BL2_IMAGE_DESC {				\
 	.image_id = BL2_IMAGE_ID,			\
 	SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,	\
@@ -42,17 +41,6 @@
 		VERSION_2, entry_point_info_t, SECURE | EXECUTABLE),\
 	.ep_info.pc = BL2_BASE,				\
 }
-#else /* LOAD_IMAGE_V2 */
-#define BL2_IMAGE_DESC {				\
-	.image_id = BL2_IMAGE_ID,			\
-	SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,	\
-		VERSION_1, image_info_t, 0),		\
-	.image_info.image_base = BL2_BASE,		\
-	SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,	\
-		VERSION_1, entry_point_info_t, SECURE | EXECUTABLE),\
-	.ep_info.pc = BL2_BASE,				\
-}
-#endif /* LOAD_IMAGE_V2 */
 
 /*
  * The following constants identify the extents of the code & read-only data

include/plat/common/platform.h

@@ -17,7 +17,6 @@ struct auth_img_desc_s;
 struct meminfo;
 struct image_info;
 struct entry_point_info;
-struct bl31_params;
 struct image_desc;
 struct bl_load_info;
 struct bl_params;
@@ -38,7 +37,6 @@ struct secure_partition_boot_info;
 /*******************************************************************************
  * Mandatory common functions
  ******************************************************************************/
-unsigned long long plat_get_syscnt_freq(void) __deprecated;
 unsigned int plat_get_syscnt_freq2(void);
 
 int plat_get_image_source(unsigned int image_id,
@@ -136,10 +134,6 @@ int bl1_plat_mem_check(uintptr_t mem_base, unsigned int mem_size,
 /*******************************************************************************
  * Optional BL1 functions (may be overridden)
  ******************************************************************************/
-#if !ERROR_DEPRECATED
-void bl1_init_bl2_mem_layout(const struct meminfo *bl1_mem_layout,
-			     struct meminfo *bl2_mem_layout);
-#endif
 /*
  * The following functions are used for image loading process in BL1.
  */
@@ -169,14 +163,10 @@ int bl1_plat_handle_post_image_load(unsigned int image_id);
  * Mandatory BL2 functions
  ******************************************************************************/
 void bl2_early_platform_setup2(u_register_t arg0, u_register_t arg1, u_register_t arg2, u_register_t arg3);
-#if !ERROR_DEPRECATED
-void bl2_early_platform_setup(struct meminfo *mem_layout);
-#endif
 void bl2_plat_arch_setup(void);
 void bl2_platform_setup(void);
 struct meminfo *bl2_plat_sec_mem_layout(void);
 
-#if LOAD_IMAGE_V2
 /*
  * This function can be used by the platforms to update/use image
  * information for given `image_id`.
@@ -184,65 +174,6 @@ struct meminfo *bl2_plat_sec_mem_layout(void);
 int bl2_plat_handle_pre_image_load(unsigned int image_id);
 int bl2_plat_handle_post_image_load(unsigned int image_id);
 
-#else /* LOAD_IMAGE_V2 */
-
-/*
- * This function returns a pointer to the shared memory that the platform has
- * kept aside to pass trusted firmware related information that BL31
- * could need
- */
-struct bl31_params *bl2_plat_get_bl31_params(void);
-
-/*
- * This function returns a pointer to the shared memory that the platform
- * has kept to point to entry point information of BL31 to BL2
- */
-struct entry_point_info *bl2_plat_get_bl31_ep_info(void);
-
-/*
- * This function flushes to main memory all the params that are
- * passed to BL31
- */
-void bl2_plat_flush_bl31_params(void);
-
-/*
- * The next 2 functions allow the platform to change the entrypoint information
- * for the mandatory 3rd level BL images, BL31 and BL33. This is done after
- * BL2 has loaded those images into memory but before BL31 is executed.
- */
-void bl2_plat_set_bl31_ep_info(struct image_info *image,
-			       struct entry_point_info *ep);
-
-void bl2_plat_set_bl33_ep_info(struct image_info *image,
-			       struct entry_point_info *ep);
-
-/* Gets the memory layout for BL33 */
-void bl2_plat_get_bl33_meminfo(struct meminfo *mem_info);
-
-/*******************************************************************************
- * Conditionally mandatory BL2 functions: must be implemented if SCP_BL2 image
- * is supported
- ******************************************************************************/
-/* Gets the memory layout for SCP_BL2 */
-void bl2_plat_get_scp_bl2_meminfo(struct meminfo *mem_info);
-
-/*
- * This function is called after loading SCP_BL2 image and it is used to perform
- * any platform-specific actions required to handle the SCP firmware.
- */
-int bl2_plat_handle_scp_bl2(struct image_info *scp_bl2_image_info);
-
-/*******************************************************************************
- * Conditionally mandatory BL2 functions: must be implemented if BL32 image
- * is supported
- ******************************************************************************/
-void bl2_plat_set_bl32_ep_info(struct image_info *image,
-			       struct entry_point_info *ep);
-
-/* Gets the memory layout for BL32 */
-void bl2_plat_get_bl32_meminfo(struct meminfo *mem_info);
-
-#endif /* LOAD_IMAGE_V2 */
 
 /*******************************************************************************
  * Optional BL2 functions (may be overridden)
@@ -283,15 +214,6 @@ int bl2u_plat_handle_scp_bl2u(void);
 /*******************************************************************************
  * Mandatory BL31 functions
  ******************************************************************************/
-#if !ERROR_DEPRECATED
-#if LOAD_IMAGE_V2
-void bl31_early_platform_setup(void *from_bl2,
-				void *plat_params_from_bl2);
-#else
-void bl31_early_platform_setup(struct bl31_params *from_bl2,
-				void *plat_params_from_bl2);
-#endif
-#endif /* ERROR_DEPRECATED */
 void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
 		u_register_t arg2, u_register_t arg3);
 void bl31_plat_arch_setup(void);
@@ -345,7 +267,6 @@ const struct mmap_region *plat_get_secure_partition_mmap(void *cookie);
 const struct secure_partition_boot_info *plat_get_secure_partition_boot_info(
 		void *cookie);
 
-#if LOAD_IMAGE_V2
 /*******************************************************************************
  * Mandatory BL image load functions(may be overridden).
  ******************************************************************************/
@@ -368,36 +289,11 @@ struct bl_params *plat_get_next_bl_params(void);
  */
 void plat_flush_next_bl_params(void);
 
-#endif /* LOAD_IMAGE_V2 */
-
-#if ENABLE_PLAT_COMPAT
-/*
- * The below declarations are to enable compatibility for the platform ports
- * using the old platform interface.
- */
-
-/*******************************************************************************
- * Optional common functions (may be overridden)
- ******************************************************************************/
-unsigned int platform_get_core_pos(unsigned long mpidr);
-
-/*******************************************************************************
- * Mandatory PSCI Compatibility functions (BL31)
- ******************************************************************************/
-int platform_setup_pm(const plat_pm_ops_t **);
-
-unsigned int plat_get_aff_count(unsigned int, unsigned long);
-unsigned int plat_get_aff_state(unsigned int, unsigned long);
-
-#else /* __ENABLE_PLAT_COMPAT__ */
 /*
  * The below function enable Trusted Firmware components like SPDs which
  * haven't migrated to the new platform API to compile on platforms which
  * have the compatibility layer disabled.
  */
 unsigned int platform_core_pos_helper(unsigned long mpidr);
-unsigned int platform_get_core_pos(unsigned long mpidr) __deprecated;
-
-#endif /* __ENABLE_PLAT_COMPAT__ */
 
 #endif /* PLATFORM_H */

include/plat/marvell/a8k/common/board_marvell_def.h

@@ -14,9 +14,7 @@
  */
 
 /* Size of cacheable stacks */
-#if DEBUG_XLAT_TABLE
-# define PLATFORM_STACK_SIZE 0x800
-#elif IMAGE_BL1
+#if IMAGE_BL1
 #if TRUSTED_BOARD_BOOT
 # define PLATFORM_STACK_SIZE 0x1000
 #else

include/plat/marvell/a8k/common/plat_marvell.h

@@ -24,6 +24,15 @@ extern const mmap_region_t plat_marvell_mmap[];
 		<= MAX_MMAP_REGIONS,					\
 		assert_max_mmap_regions)
 
+struct marvell_bl31_params {
+       param_header_t h;
+       image_info_t *bl31_image_info;
+       entry_point_info_t *bl32_ep_info;
+       image_info_t *bl32_image_info;
+       entry_point_info_t *bl33_ep_info;
+       image_info_t *bl33_image_info;
+};
+
 /*
  * Utility functions common to Marvell standard platforms
  */
@@ -67,7 +76,7 @@ uint32_t marvell_get_spsr_for_bl32_entry(void);
 uint32_t marvell_get_spsr_for_bl33_entry(void);
 
 /* BL31 utility functions */
-void marvell_bl31_early_platform_setup(struct bl31_params *from_bl2,
+void marvell_bl31_early_platform_setup(void *from_bl2,
 				       uintptr_t soc_fw_config,
 				       uintptr_t hw_config,
 				       void *plat_params_from_bl2);

lib/aarch64/misc_helpers.S

@@ -55,16 +55,6 @@ func smc
 	smc	#0
 endfunc smc
 
-/* -----------------------------------------------------------------------
- * void zeromem16(void *mem, unsigned int length);
- *
- * Initialise a memory region to 0.
- * The memory address must be 16-byte aligned.
- * NOTE: This function is deprecated and zeromem should be used instead.
- * -----------------------------------------------------------------------
- */
-.equ	zeromem16, zeromem
-
 /* -----------------------------------------------------------------------
  * void zero_normalmem(void *mem, unsigned int length);
  *

lib/aarch64/xlat_tables.c

-/*
- * Copyright (c) 2014-2016, ARM Limited and Contributors. All rights reserved.
- *
- * SPDX-License-Identifier: BSD-3-Clause
- */
-
-/*
- * This file is deprecated and is retained here only for compatibility.
- * The xlat_tables library can be found in `lib/xlat_tables` directory.
- */
-#if !ERROR_DEPRECATED
-#include "../xlat_tables/xlat_tables_common.c"
-#include "../xlat_tables/aarch64/xlat_tables.c"
-#endif

lib/locks/exclusive/spinlock.S

-/*
- * Copyright (c) 2013-2016, ARM Limited and Contributors. All rights reserved.
- *
- * SPDX-License-Identifier: BSD-3-Clause
- */
-
-#if !ERROR_DEPRECATED
-#include "./aarch64/spinlock.S"
-#endif

lib/psci/aarch64/psci_helpers.S

@@ -12,9 +12,6 @@
 	.globl	psci_do_pwrdown_cache_maintenance
 	.globl	psci_do_pwrup_cache_maintenance
 	.globl	psci_power_down_wfi
-#if !ERROR_DEPRECATED
-	.globl psci_entrypoint
-#endif
 
 /* -----------------------------------------------------------------------
  * void psci_do_pwrdown_cache_maintenance(unsigned int power level);
@@ -131,12 +128,3 @@ func psci_power_down_wfi
 	wfi
 	no_ret	plat_panic_handler
 endfunc psci_power_down_wfi
-
-/* -----------------------------------------------------------------------
- * void psci_entrypoint(void);
- * The deprecated entry point for PSCI on warm boot for AArch64.
- * -----------------------------------------------------------------------
- */
-func_deprecated psci_entrypoint
-	b	bl31_warm_entrypoint
-endfunc_deprecated psci_entrypoint

lib/psci/psci_common.c

@@ -938,84 +938,6 @@ int psci_secondaries_brought_up(void)
 	return (n_valid > 1U) ? 1 : 0;
 }
 
-#if ENABLE_PLAT_COMPAT
-/*******************************************************************************
- * PSCI Compatibility helper function to return the 'power_state' parameter of
- * the PSCI CPU SUSPEND request for the current CPU. Returns PSCI_INVALID_DATA
- * if not invoked within CPU_SUSPEND for the current CPU.
- ******************************************************************************/
-int psci_get_suspend_powerstate(void)
-{
-	/* Sanity check to verify that CPU is within CPU_SUSPEND */
-	if (psci_get_aff_info_state() == AFF_STATE_ON &&
-		!is_local_state_run(psci_get_cpu_local_state()))
-		return psci_power_state_compat[plat_my_core_pos()];
-
-	return PSCI_INVALID_DATA;
-}
-
-/*******************************************************************************
- * PSCI Compatibility helper function to return the state id of the current
- * cpu encoded in the 'power_state' parameter. Returns PSCI_INVALID_DATA
- * if not invoked within CPU_SUSPEND for the current CPU.
- ******************************************************************************/
-int psci_get_suspend_stateid(void)
-{
-	unsigned int power_state;
-	power_state = psci_get_suspend_powerstate();
-	if (power_state != PSCI_INVALID_DATA)
-		return psci_get_pstate_id(power_state);
-
-	return PSCI_INVALID_DATA;
-}
-
-/*******************************************************************************
- * PSCI Compatibility helper function to return the state id encoded in the
- * 'power_state' parameter of the CPU specified by 'mpidr'. Returns
- * PSCI_INVALID_DATA if the CPU is not in CPU_SUSPEND.
- ******************************************************************************/
-int psci_get_suspend_stateid_by_mpidr(unsigned long mpidr)
-{
-	int cpu_idx = plat_core_pos_by_mpidr(mpidr);
-
-	if (cpu_idx == -1)
-		return PSCI_INVALID_DATA;
-
-	/* Sanity check to verify that the CPU is in CPU_SUSPEND */
-	if ((psci_get_aff_info_state_by_idx(cpu_idx) == AFF_STATE_ON) &&
-		(!is_local_state_run(psci_get_cpu_local_state_by_idx(cpu_idx))))
-		return psci_get_pstate_id(psci_power_state_compat[cpu_idx]);
-
-	return PSCI_INVALID_DATA;
-}
-
-/*******************************************************************************
- * This function returns highest affinity level which is in OFF
- * state. The affinity instance with which the level is associated is
- * determined by the caller.
- ******************************************************************************/
-unsigned int psci_get_max_phys_off_afflvl(void)
-{
-	psci_power_state_t state_info;
-
-	zeromem(&state_info, sizeof(state_info));
-	psci_get_target_local_pwr_states(PLAT_MAX_PWR_LVL, &state_info);
-
-	return psci_find_target_suspend_lvl(&state_info);
-}
-
-/*******************************************************************************
- * PSCI Compatibility helper function to return target affinity level requested
- * for the CPU_SUSPEND. This function assumes affinity levels correspond to
- * power domain levels on the platform.
- ******************************************************************************/
-int psci_get_suspend_afflvl(void)
-{
-	return psci_get_suspend_pwrlvl();
-}
-
-#endif
-
 /*******************************************************************************
  * Initiate power down sequence, by calling power down operations registered for
  * this CPU.

lib/xlat_tables/aarch32/xlat_tables.c

@@ -61,22 +61,6 @@ void init_xlat_tables(void)
 	assert((PLAT_PHY_ADDR_SPACE_SIZE - 1U) <= get_max_supported_pa());
 }
 
-/*******************************************************************************
- * Function for enabling the MMU in Secure PL1, assuming that the
- * page-tables have already been created.
- ******************************************************************************/
-#if !ERROR_DEPRECATED
-void enable_mmu_secure(unsigned int flags)
-{
-	enable_mmu_svc_mon(flags);
-}
-
-void enable_mmu_direct(unsigned int flags)
-{
-	enable_mmu_direct_svc_mon(flags);
-}
-#endif
-
 void enable_mmu_svc_mon(unsigned int flags)
 {
 	unsigned int mair0, ttbcr, sctlr;

lib/xlat_tables/xlat_tables_private.h

@@ -15,23 +15,6 @@
 #error xlat tables v2 must be used with HW_ASSISTED_COHERENCY
 #endif
 
-/*
- * If the platform hasn't defined a physical and a virtual address space size
- * default to ADDR_SPACE_SIZE.
- */
-#if ERROR_DEPRECATED
-# ifdef ADDR_SPACE_SIZE
-#  error "ADDR_SPACE_SIZE is deprecated. Use PLAT_xxx_ADDR_SPACE_SIZE instead."
-# endif
-#elif defined(ADDR_SPACE_SIZE)
-# ifndef PLAT_PHY_ADDR_SPACE_SIZE
-#  define PLAT_PHY_ADDR_SPACE_SIZE	ADDR_SPACE_SIZE
-# endif
-# ifndef PLAT_VIRT_ADDR_SPACE_SIZE
-#  define PLAT_VIRT_ADDR_SPACE_SIZE	ADDR_SPACE_SIZE
-# endif
-#endif
-
 CASSERT(CHECK_VIRT_ADDR_SPACE_SIZE(PLAT_VIRT_ADDR_SPACE_SIZE),
 	assert_valid_virt_addr_space_size);
 

lib/xlat_tables_v2/xlat_tables_context.c

@@ -18,24 +18,6 @@
  */
 uint64_t mmu_cfg_params[MMU_CFG_PARAM_MAX];
 
-/*
- * Each platform can define the size of its physical and virtual address spaces.
- * If the platform hasn't defined one or both of them, default to
- * ADDR_SPACE_SIZE. The latter is deprecated, though.
- */
-#if ERROR_DEPRECATED
-# ifdef ADDR_SPACE_SIZE
-#  error "ADDR_SPACE_SIZE is deprecated. Use PLAT_xxx_ADDR_SPACE_SIZE instead."
-# endif
-#elif defined(ADDR_SPACE_SIZE)
-# ifndef PLAT_PHY_ADDR_SPACE_SIZE
-#  define PLAT_PHY_ADDR_SPACE_SIZE	ADDR_SPACE_SIZE
-# endif
-# ifndef PLAT_VIRT_ADDR_SPACE_SIZE
-#  define PLAT_VIRT_ADDR_SPACE_SIZE	ADDR_SPACE_SIZE
-# endif
-#endif
-
 /*
  * Allocate and initialise the default translation context for the BL image
  * currently executing.
@@ -121,18 +103,6 @@ int xlat_change_mem_attributes(uintptr_t base_va, size_t size, uint32_t attr)
 
 #ifdef AARCH32
 
-#if !ERROR_DEPRECATED
-void enable_mmu_secure(unsigned int flags)
-{
-	enable_mmu_svc_mon(flags);
-}
-
-void enable_mmu_direct(unsigned int flags)
-{
-	enable_mmu_direct_svc_mon(flags);
-}
-#endif
-
 void enable_mmu_svc_mon(unsigned int flags)
 {
 	setup_mmu_cfg((uint64_t *)&mmu_cfg_params, flags,

make_helpers/defaults.mk

@@ -23,10 +23,6 @@ ARCH				:= aarch64
 ARM_ARCH_MAJOR			:= 8
 ARM_ARCH_MINOR			:= 0
 
-# Determine the version of ARM GIC architecture to use for interrupt management
-# in EL3. The platform port can change this value if needed.
-ARM_GIC_ARCH			:= 2
-
 # Base commit to perform code check on
 BASE_COMMIT			:= origin/master
 
@@ -116,9 +112,6 @@ HW_ASSISTED_COHERENCY		:= 0
 # Set the default algorithm for the generation of Trusted Board Boot keys
 KEY_ALG				:= rsa
 
-# Flag to enable new version of image loading
-LOAD_IMAGE_V2			:= 0
-
 # Enable use of the console API allowing multiple consoles to be registered
 # at the same time.
 MULTI_CONSOLE_API		:= 0
@@ -169,14 +162,14 @@ SPIN_ON_BL1_EXIT		:= 0
 # Flags to build TF with Trusted Boot support
 TRUSTED_BOARD_BOOT		:= 0
 
-# Build option to choose whether Trusted firmware uses Coherent memory or not.
+# Build option to choose whether Trusted Firmware uses Coherent memory or not.
 USE_COHERENT_MEM		:= 1
 
-# Build option to choose wheter Trusted firmware uses library at ROM
-USE_ROMLIB				:= 0
+# Build option to choose whether Trusted Firmware uses library at ROM
+USE_ROMLIB			:= 0
 
 # Use tbbr_oid.h instead of platform_oid.h
-USE_TBBR_DEFS			= $(ERROR_DEPRECATED)
+USE_TBBR_DEFS			:= 1
 
 # Build verbosity
 V				:= 0