Merge pull request #456 from soby-mathew/sm/gicv3-tsp-plat-changes-v2

Modify TSP and ARM standard platforms for new GIC drivers v2

plat/arm/board/fvp/fvp_pm.c

@@ -30,7 +30,6 @@
 
 #include <arch_helpers.h>
 #include <arm_config.h>
-#include <arm_gic.h>
 #include <assert.h>
 #include <debug.h>
 #include <errno.h>
@@ -72,7 +71,7 @@ const unsigned int arm_pm_idle_states[] = {
 static void fvp_cpu_pwrdwn_common(void)
 {
 	/* Prevent interrupts from spuriously waking up this cpu */
-	arm_gic_cpuif_deactivate();
+	plat_arm_gic_cpuif_disable();
 
 	/* Program the power controller to power off this cpu. */
 	fvp_pwrc_write_ppoffr(read_mpidr_el1());
@@ -93,6 +92,42 @@ static void fvp_cluster_pwrdwn_common(void)
 	fvp_pwrc_write_pcoffr(mpidr);
 }
 
+static void fvp_power_domain_on_finish_common(const psci_power_state_t *target_state)
+{
+	unsigned long mpidr;
+
+	assert(target_state->pwr_domain_state[ARM_PWR_LVL0] ==
+					ARM_LOCAL_STATE_OFF);
+
+	/* Get the mpidr for this cpu */
+	mpidr = read_mpidr_el1();
+
+	/* Perform the common cluster specific operations */
+	if (target_state->pwr_domain_state[ARM_PWR_LVL1] ==
+					ARM_LOCAL_STATE_OFF) {
+		/*
+		 * This CPU might have woken up whilst the cluster was
+		 * attempting to power down. In this case the FVP power
+		 * controller will have a pending cluster power off request
+		 * which needs to be cleared by writing to the PPONR register.
+		 * This prevents the power controller from interpreting a
+		 * subsequent entry of this cpu into a simple wfi as a power
+		 * down request.
+		 */
+		fvp_pwrc_write_pponr(mpidr);
+
+		/* Enable coherency if this cluster was off */
+		fvp_cci_enable();
+	}
+
+	/*
+	 * Clear PWKUPR.WEN bit to ensure interrupts do not interfere
+	 * with a cpu power down unless the bit is set again
+	 */
+	fvp_pwrc_clr_wen(mpidr);
+}
+
+
 /*******************************************************************************
  * FVP handler called when a CPU is about to enter standby.
  ******************************************************************************/
@@ -196,43 +231,13 @@ void fvp_pwr_domain_suspend(const psci_power_state_t *target_state)
  ******************************************************************************/
 void fvp_pwr_domain_on_finish(const psci_power_state_t *target_state)
 {
-	unsigned long mpidr;
-
-	assert(target_state->pwr_domain_state[ARM_PWR_LVL0] ==
-					ARM_LOCAL_STATE_OFF);
-
-	/* Get the mpidr for this cpu */
-	mpidr = read_mpidr_el1();
-
-	/* Perform the common cluster specific operations */
-	if (target_state->pwr_domain_state[ARM_PWR_LVL1] ==
-					ARM_LOCAL_STATE_OFF) {
-		/*
-		 * This CPU might have woken up whilst the cluster was
-		 * attempting to power down. In this case the FVP power
-		 * controller will have a pending cluster power off request
-		 * which needs to be cleared by writing to the PPONR register.
-		 * This prevents the power controller from interpreting a
-		 * subsequent entry of this cpu into a simple wfi as a power
-		 * down request.
-		 */
-		fvp_pwrc_write_pponr(mpidr);
-
-		/* Enable coherency if this cluster was off */
-		fvp_cci_enable();
-	}
-
-	/*
-	 * Clear PWKUPR.WEN bit to ensure interrupts do not interfere
-	 * with a cpu power down unless the bit is set again
-	 */
-	fvp_pwrc_clr_wen(mpidr);
+	fvp_power_domain_on_finish_common(target_state);
 
 	/* Enable the gic cpu interface */
-	arm_gic_cpuif_setup();
+	plat_arm_gic_pcpu_init();
 
-	/* TODO: This setup is needed only after a cold boot */
-	arm_gic_pcpu_distif_setup();
+	/* Program the gic per-cpu distributor or re-distributor interface */
+	plat_arm_gic_cpuif_enable();
 }
 
 /*******************************************************************************
@@ -251,7 +256,10 @@ void fvp_pwr_domain_suspend_finish(const psci_power_state_t *target_state)
 					ARM_LOCAL_STATE_RET)
 		return;
 
-	fvp_pwr_domain_on_finish(target_state);
+	fvp_power_domain_on_finish_common(target_state);
+
+	/* Enable the gic cpu interface */
+	plat_arm_gic_cpuif_enable();
 }
 
 /*******************************************************************************

plat/arm/board/fvp/include/plat_macros.S

@@ -53,16 +53,14 @@
 	/* Check if VE mmap */
 	cmp	w16, #BLD_GIC_VE_MMAP
 	b.eq	use_ve_mmap
-	/* Check if Cortex-A53/A57 mmap */
-	cmp	w16, #BLD_GIC_A53A57_MMAP
-	b.ne	exit_print_gic_regs
+	/* Assume Base Cortex mmap */
 	mov_imm	x17, BASE_GICC_BASE
 	mov_imm	x16, BASE_GICD_BASE
-	b	print_gicc_regs
+	b	print_gic_regs
 use_ve_mmap:
 	mov_imm	x17, VE_GICC_BASE
 	mov_imm	x16, VE_GICD_BASE
-print_gicc_regs:
+print_gic_regs:
 	arm_print_gic_regs
 	.endm
 

plat/arm/board/fvp/include/platform_def.h

@@ -121,5 +121,24 @@
 		TZC_REGION_ACCESS_RDWR(FVP_NSAID_VIRTIO)	|	\
 		TZC_REGION_ACCESS_RDWR(FVP_NSAID_VIRTIO_OLD))
 
+/*
+ * GIC related constants to cater for both GICv2 and GICv3 instances of an
+ * FVP. They could be overriden at runtime in case the FVP implements the legacy
+ * VE memory map.
+ */
+#define PLAT_ARM_GICD_BASE		BASE_GICD_BASE
+#define PLAT_ARM_GICR_BASE		BASE_GICR_BASE
+#define PLAT_ARM_GICC_BASE		BASE_GICC_BASE
+
+/*
+ * Define a list of Group 1 Secure and Group 0 interrupts as per GICv3
+ * terminology. On a GICv2 system or mode, the lists will be merged and treated
+ * as Group 0 interrupts.
+ */
+#define PLAT_ARM_G1S_IRQS		ARM_G1S_IRQS,			\
+					FVP_IRQ_TZ_WDOG,		\
+					FVP_IRQ_SEC_SYS_TIMER
+
+#define PLAT_ARM_G0_IRQS		ARM_G0_IRQS
 
 #endif /* __PLATFORM_DEF_H__ */

plat/arm/board/fvp/platform.mk

@@ -28,6 +28,35 @@
 # POSSIBILITY OF SUCH DAMAGE.
 #
 
+# Use the Legacy GICv3 driver on the FVP by default to maintain compatibility.
+FVP_USE_GIC_DRIVER	:= FVP_GICV3_LEGACY
+
+# The FVP platform depends on this macro to build with correct GIC driver.
+$(eval $(call add_define,FVP_USE_GIC_DRIVER))
+
+# Choose the GIC sources depending upon the how the FVP will be invoked
+ifeq (${FVP_USE_GIC_DRIVER}, FVP_GICV3)
+FVP_GIC_SOURCES		:=	drivers/arm/gic/common/gic_common.c	\
+				drivers/arm/gic/v3/gicv3_main.c		\
+				drivers/arm/gic/v3/gicv3_helpers.c	\
+				plat/common/plat_gicv3.c		\
+				plat/arm/common/arm_gicv3.c
+else ifeq (${FVP_USE_GIC_DRIVER}, FVP_GICV2)
+FVP_GIC_SOURCES		:=	drivers/arm/gic/common/gic_common.c	\
+				drivers/arm/gic/v2/gicv2_main.c		\
+				drivers/arm/gic/v2/gicv2_helpers.c	\
+				plat/common/plat_gicv2.c		\
+				plat/arm/common/arm_gicv2.c
+else ifeq (${FVP_USE_GIC_DRIVER}, FVP_GICV3_LEGACY)
+FVP_GIC_SOURCES		:=	drivers/arm/gic/arm_gic.c		\
+				drivers/arm/gic/gic_v2.c		\
+				drivers/arm/gic/gic_v3.c		\
+				plat/common/plat_gic.c			\
+				plat/arm/common/arm_gicv3_legacy.c
+else
+$(error "Incorrect GIC driver chosen on FVP port")
+endif
+
 PLAT_INCLUDES		:=	-Iplat/arm/board/fvp/include
 
 
@@ -62,7 +91,8 @@ BL31_SOURCES		+=	lib/cpus/aarch64/aem_generic.S			\
 				plat/arm/board/fvp/fvp_security.c		\
 				plat/arm/board/fvp/fvp_topology.c		\
 				plat/arm/board/fvp/aarch64/fvp_helpers.S	\
-				plat/arm/board/fvp/drivers/pwrc/fvp_pwrc.c
+				plat/arm/board/fvp/drivers/pwrc/fvp_pwrc.c	\
+				${FVP_GIC_SOURCES}
 
 # Disable the PSCI platform compatibility layer
 ENABLE_PLAT_COMPAT	:= 	0

plat/arm/board/fvp/tsp/tsp-fvp.mk

@@ -31,6 +31,7 @@
 # TSP source files specific to FVP platform
 BL32_SOURCES		+=	plat/arm/board/fvp/fvp_topology.c		\
 				plat/arm/board/fvp/drivers/pwrc/fvp_pwrc.c	\
-				plat/arm/board/fvp/tsp/fvp_tsp_setup.c
+				plat/arm/board/fvp/tsp/fvp_tsp_setup.c		\
+				${FVP_GIC_SOURCES}
 
 include plat/arm/common/tsp/arm_tsp.mk

plat/arm/board/juno/include/platform_def.h

@@ -94,17 +94,18 @@
  */
 
 /* GIC related constants (no GICR in GIC-400) */
-#define PLAT_CSS_GICD_BASE		0x2c010000
-#define PLAT_CSS_GICR_BASE		0x0
-#define PLAT_CSS_GICC_BASE		0x2c02f000
-#define PLAT_CSS_GICH_BASE		0x2c04f000
-#define PLAT_CSS_GICV_BASE		0x2c06f000
-
-#define PLAT_CSS_IRQ_SEC_LIST		CSS_IRQ_MHU,			\
-					CSS_IRQ_GPU_SMMU_0,		\
-					CSS_IRQ_TZC,			\
-					CSS_IRQ_TZ_WDOG,		\
-					CSS_IRQ_SEC_SYS_TIMER,		\
+#define PLAT_ARM_GICD_BASE		0x2c010000
+#define PLAT_ARM_GICC_BASE		0x2c02f000
+#define PLAT_ARM_GICH_BASE		0x2c04f000
+#define PLAT_ARM_GICV_BASE		0x2c06f000
+
+/*
+ * Define a list of Group 1 Secure and Group 0 interrupts as per GICv3
+ * terminology. On a GICv2 system or mode, the lists will be merged and treated
+ * as Group 0 interrupts.
+ */
+#define PLAT_ARM_G1S_IRQS		CSS_G1S_IRQS,			\
+					ARM_G1S_IRQS,			\
 					JUNO_IRQ_DMA_SMMU,		\
 					JUNO_IRQ_HDLCD0_SMMU,		\
 					JUNO_IRQ_HDLCD1_SMMU,		\
@@ -114,6 +115,8 @@
 					JUNO_IRQ_GPU_SMMU_1,		\
 					JUNO_IRQ_ETR_SMMU
 
+#define PLAT_ARM_G0_IRQS		ARM_G0_IRQS
+
 /*
  * Required ARM CSS SoC based platform porting definitions
  */

plat/arm/board/juno/platform.mk

@@ -28,6 +28,12 @@
 # POSSIBILITY OF SUCH DAMAGE.
 #
 
+JUNO_GIC_SOURCES	:=	drivers/arm/gic/common/gic_common.c	\
+				drivers/arm/gic/v2/gicv2_main.c		\
+				drivers/arm/gic/v2/gicv2_helpers.c	\
+				plat/common/plat_gicv2.c		\
+				plat/arm/common/arm_gicv2.c
+
 PLAT_INCLUDES		:=	-Iplat/arm/board/juno/include
 
 PLAT_BL_COMMON_SOURCES	:=	plat/arm/board/juno/aarch64/juno_helpers.S
@@ -44,7 +50,8 @@ BL31_SOURCES		+=	lib/cpus/aarch64/cortex_a53.S		\
 				lib/cpus/aarch64/cortex_a57.S		\
 				lib/cpus/aarch64/cortex_a72.S		\
 				plat/arm/board/juno/juno_pm.c		\
-				plat/arm/board/juno/juno_security.c
+				plat/arm/board/juno/juno_security.c	\
+				${JUNO_GIC_SOURCES}
 
 # Enable workarounds for selected Cortex-A57 erratas.
 ERRATA_A57_806969	:=	0

plat/arm/board/juno/tsp/tsp-juno.mk

@@ -28,6 +28,7 @@
 # POSSIBILITY OF SUCH DAMAGE.
 #
 
-BL32_SOURCES		+=	plat/arm/css/common/css_topology.c
+BL32_SOURCES		+=	plat/arm/css/common/css_topology.c	\
+				${JUNO_GIC_SOURCES}
 
 include plat/arm/common/tsp/arm_tsp.mk

plat/arm/common/arm_bl31_setup.c

@@ -31,7 +31,6 @@
 #include <arch.h>
 #include <arch_helpers.h>
 #include <arm_def.h>
-#include <arm_gic.h>
 #include <assert.h>
 #include <bl_common.h>
 #include <cci.h>
@@ -200,9 +199,9 @@ void bl31_early_platform_setup(bl31_params_t *from_bl2,
  ******************************************************************************/
 void arm_bl31_platform_setup(void)
 {
-	/* Initialize the gic cpu and distributor interfaces */
+	/* Initialize the GIC driver, cpu and distributor interfaces */
+	plat_arm_gic_driver_init();
 	plat_arm_gic_init();
-	arm_gic_setup();
 
 #if RESET_TO_BL31
 	/*

plat/arm/common/arm_common.mk

@@ -108,15 +108,11 @@ BL2_SOURCES		+=	drivers/arm/tzc400/tzc400.c			\
 
 BL31_SOURCES		+=	drivers/arm/cci/cci.c				\
 				drivers/arm/ccn/ccn.c				\
-				drivers/arm/gic/arm_gic.c			\
-				drivers/arm/gic/gic_v2.c			\
-				drivers/arm/gic/gic_v3.c			\
 				drivers/arm/tzc400/tzc400.c			\
 				plat/arm/common/arm_bl31_setup.c		\
 				plat/arm/common/arm_pm.c			\
 				plat/arm/common/arm_security.c			\
 				plat/arm/common/arm_topology.c			\
-				plat/common/plat_gic.c				\
 				plat/common/aarch64/platform_mp_stack.S		\
 				plat/common/aarch64/plat_psci_common.c
 
@@ -127,9 +123,9 @@ ifneq (${TRUSTED_BOARD_BOOT},0)
 
     # Include common TBB sources
     AUTH_SOURCES	:=	drivers/auth/auth_mod.c				\
-    				drivers/auth/crypto_mod.c			\
-    				drivers/auth/img_parser_mod.c			\
-    				drivers/auth/tbbr/tbbr_cot.c			\
+				drivers/auth/crypto_mod.c			\
+				drivers/auth/img_parser_mod.c			\
+				drivers/auth/tbbr/tbbr_cot.c			\
 
     BL1_SOURCES		+=	${AUTH_SOURCES}
     BL2_SOURCES		+=	${AUTH_SOURCES}

plat/arm/common/arm_gicv2.c

+/*
+ * Copyright (c) 2015, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <gicv2.h>
+#include <plat_arm.h>
+#include <platform.h>
+#include <platform_def.h>
+
+/******************************************************************************
+ * The following functions are defined as weak to allow a platform to override
+ * the way the GICv2 driver is initialised and used.
+ *****************************************************************************/
+#pragma weak plat_arm_gic_driver_init
+#pragma weak plat_arm_gic_init
+#pragma weak plat_arm_gic_cpuif_enable
+#pragma weak plat_arm_gic_cpuif_disable
+#pragma weak plat_arm_gic_pcpu_init
+
+/******************************************************************************
+ * On a GICv2 system, the Group 1 secure interrupts are treated as Group 0
+ * interrupts.
+ *****************************************************************************/
+const unsigned int g0_interrupt_array[] = {
+	PLAT_ARM_G1S_IRQS,
+	PLAT_ARM_G0_IRQS
+};
+
+/*
+ * Ideally `arm_gic_data` structure definition should be a `const` but it is
+ * kept as modifiable for overwriting with different GICD and GICC base when
+ * running on FVP with VE memory map.
+ */
+gicv2_driver_data_t arm_gic_data = {
+	.gicd_base = PLAT_ARM_GICD_BASE,
+	.gicc_base = PLAT_ARM_GICC_BASE,
+	.g0_interrupt_num = ARRAY_SIZE(g0_interrupt_array),
+	.g0_interrupt_array = g0_interrupt_array,
+};
+
+/******************************************************************************
+ * ARM common helper to initialize the GICv2 only driver.
+ *****************************************************************************/
+void plat_arm_gic_driver_init(void)
+{
+	gicv2_driver_init(&arm_gic_data);
+}
+
+void plat_arm_gic_init(void)
+{
+	gicv2_distif_init();
+	gicv2_pcpu_distif_init();
+	gicv2_cpuif_enable();
+}
+
+/******************************************************************************
+ * ARM common helper to enable the GICv2 CPU interface
+ *****************************************************************************/
+void plat_arm_gic_cpuif_enable(void)
+{
+	gicv2_cpuif_enable();
+}
+
+/******************************************************************************
+ * ARM common helper to disable the GICv2 CPU interface
+ *****************************************************************************/
+void plat_arm_gic_cpuif_disable(void)
+{
+	gicv2_cpuif_disable();
+}
+
+/******************************************************************************
+ * ARM common helper to initialize the per cpu distributor interface in GICv2
+ *****************************************************************************/
+void plat_arm_gic_pcpu_init(void)
+{
+	gicv2_pcpu_distif_init();
+}

plat/arm/common/arm_gicv3.c

+/*
+ * Copyright (c) 2015, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <arm_def.h>
+#include <gicv3.h>
+#include <plat_arm.h>
+#include <platform.h>
+#include <platform_def.h>
+
+/******************************************************************************
+ * The following functions are defined as weak to allow a platform to override
+ * the way the GICv3 driver is initialised and used.
+ *****************************************************************************/
+#pragma weak plat_arm_gic_driver_init
+#pragma weak plat_arm_gic_init
+#pragma weak plat_arm_gic_cpuif_enable
+#pragma weak plat_arm_gic_cpuif_disable
+#pragma weak plat_arm_gic_pcpu_init
+
+/* The GICv3 driver only needs to be initialized in EL3 */
+uintptr_t rdistif_base_addrs[PLATFORM_CORE_COUNT];
+
+/* Array of Group1 secure interrupts to be configured by the gic driver */
+const unsigned int g1s_interrupt_array[] = {
+	PLAT_ARM_G1S_IRQS
+};
+
+/* Array of Group0 interrupts to be configured by the gic driver */
+const unsigned int g0_interrupt_array[] = {
+	PLAT_ARM_G0_IRQS
+};
+
+const gicv3_driver_data_t arm_gic_data = {
+	.gicd_base = PLAT_ARM_GICD_BASE,
+	.gicr_base = PLAT_ARM_GICR_BASE,
+	.g0_interrupt_num = ARRAY_SIZE(g0_interrupt_array),
+	.g1s_interrupt_num = ARRAY_SIZE(g1s_interrupt_array),
+	.g0_interrupt_array = g0_interrupt_array,
+	.g1s_interrupt_array = g1s_interrupt_array,
+	.rdistif_num = PLATFORM_CORE_COUNT,
+	.rdistif_base_addrs = rdistif_base_addrs,
+	.mpidr_to_core_pos = plat_arm_calc_core_pos
+};
+
+void plat_arm_gic_driver_init(void)
+{
+	/*
+	 * The GICv3 driver is initialized in EL3 and does not need
+	 * to be initialized again in SEL1. This is because the S-EL1
+	 * can use GIC system registers to manage interrupts and does
+	 * not need GIC interface base addresses to be configured.
+	 */
+#if IMAGE_BL31
+	gicv3_driver_init(&arm_gic_data);
+#endif
+}
+
+/******************************************************************************
+ * ARM common helper to initialize the GIC. Only invoked by BL31
+ *****************************************************************************/
+void plat_arm_gic_init(void)
+{
+	gicv3_distif_init();
+	gicv3_rdistif_init(plat_my_core_pos());
+	gicv3_cpuif_enable(plat_my_core_pos());
+}
+
+/******************************************************************************
+ * ARM common helper to enable the GIC CPU interface
+ *****************************************************************************/
+void plat_arm_gic_cpuif_enable(void)
+{
+	gicv3_cpuif_enable(plat_my_core_pos());
+}
+
+/******************************************************************************
+ * ARM common helper to disable the GIC CPU interface
+ *****************************************************************************/
+void plat_arm_gic_cpuif_disable(void)
+{
+	gicv3_cpuif_disable(plat_my_core_pos());
+}
+
+/******************************************************************************
+ * ARM common helper to initialize the per-cpu redistributor interface in GICv3
+ *****************************************************************************/
+void plat_arm_gic_pcpu_init(void)
+{
+	gicv3_rdistif_init(plat_my_core_pos());
+}

plat/arm/css/common/css_common.c → plat/arm/common/arm_gicv3_legacy.c

@@ -28,37 +28,69 @@
  * POSSIBILITY OF SUCH DAMAGE.
  */
 
+#include <arm_def.h>
 #include <arm_gic.h>
-#include <bl_common.h>
+#include <plat_arm.h>
+#include <platform.h>
 #include <platform_def.h>
 
+/******************************************************************************
+ * The following function is defined as weak to allow a platform to override
+ * the way the Legacy GICv3 driver is initialised and used.
+ *****************************************************************************/
+#pragma weak plat_arm_gic_driver_init
+#pragma weak plat_arm_gic_init
+#pragma weak plat_arm_gic_cpuif_enable
+#pragma weak plat_arm_gic_cpuif_disable
+#pragma weak plat_arm_gic_pcpu_init
 
-#if IMAGE_BL31 || IMAGE_BL32
-
+/*
+ * In the GICv3 Legacy mode, the Group 1 secure interrupts are treated as Group
+ * 0 interrupts.
+ */
 const unsigned int irq_sec_array[] = {
-	PLAT_CSS_IRQ_SEC_LIST,
-	ARM_IRQ_SEC_PHY_TIMER,
-	ARM_IRQ_SEC_SGI_0,
-	ARM_IRQ_SEC_SGI_1,
-	ARM_IRQ_SEC_SGI_2,
-	ARM_IRQ_SEC_SGI_3,
-	ARM_IRQ_SEC_SGI_4,
-	ARM_IRQ_SEC_SGI_5,
-	ARM_IRQ_SEC_SGI_6,
-	ARM_IRQ_SEC_SGI_7
+	PLAT_ARM_G0_IRQS,
+	PLAT_ARM_G1S_IRQS
 };
 
+void plat_arm_gic_driver_init(void)
+{
+	arm_gic_init(PLAT_ARM_GICC_BASE,
+		     PLAT_ARM_GICD_BASE,
+		     PLAT_ARM_GICR_BASE,
+		     irq_sec_array,
+		     ARRAY_SIZE(irq_sec_array));
+}
 
-/* Weak definitions may be overridden in specific CSS based platform */
-#pragma weak plat_arm_gic_init
-
+/******************************************************************************
+ * ARM common helper to initialize the GIC.
+ *****************************************************************************/
 void plat_arm_gic_init(void)
 {
-	arm_gic_init(PLAT_CSS_GICC_BASE,
-		PLAT_CSS_GICD_BASE,
-		PLAT_CSS_GICR_BASE,
-		irq_sec_array,
-		ARRAY_SIZE(irq_sec_array));
+	arm_gic_setup();
 }
 
-#endif /* IMAGE_BL31 || IMAGE_BL32 */
+/******************************************************************************
+ * ARM common helper to enable the GIC CPU interface
+ *****************************************************************************/
+void plat_arm_gic_cpuif_enable(void)
+{
+	arm_gic_cpuif_setup();
+}
+
+/******************************************************************************
+ * ARM common helper to disable the GIC CPU interface
+ *****************************************************************************/
+void plat_arm_gic_cpuif_disable(void)
+{
+	arm_gic_cpuif_deactivate();
+}
+
+/******************************************************************************
+ * ARM common helper to initialize the per-cpu distributor in GICv2 or
+ * redistributor interface in GICv3.
+ *****************************************************************************/
+void plat_arm_gic_pcpu_init(void)
+{
+	arm_gic_pcpu_distif_setup();
+}

plat/arm/common/arm_pm.c

@@ -164,9 +164,13 @@ void arm_system_pwr_domain_resume(void)
 	/* Assert system power domain is available on the platform */
 	assert(PLAT_MAX_PWR_LVL >= ARM_PWR_LVL2);
 
-	arm_gic_setup();
+	/*
+	 * TODO: On GICv3 systems, figure out whether the core that wakes up
+	 * first from system suspend need to initialize the re-distributor
+	 * interface of all the other suspended cores.
+	 */
+	plat_arm_gic_init();
 	plat_arm_security_setup();
-
 	arm_configure_sys_timer();
 }
 

plat/arm/common/tsp/arm_tsp.mk

@@ -29,9 +29,6 @@
 #
 
 # TSP source files common to ARM standard platforms
-BL32_SOURCES		+=	drivers/arm/gic/arm_gic.c			\
-				drivers/arm/gic/gic_v2.c			\
-				plat/arm/common/arm_topology.c			\
+BL32_SOURCES		+=	plat/arm/common/arm_topology.c			\
 				plat/arm/common/tsp/arm_tsp_setup.c		\
-				plat/common/aarch64/platform_mp_stack.S		\
-				plat/common/plat_gic.c
+				plat/common/aarch64/platform_mp_stack.S

plat/arm/common/tsp/arm_tsp_setup.c

@@ -89,7 +89,7 @@ void tsp_early_platform_setup(void)
  ******************************************************************************/
 void tsp_platform_setup(void)
 {
-	plat_arm_gic_init();
+	plat_arm_gic_driver_init();
 }
 
 /*******************************************************************************

plat/arm/css/common/css_common.mk

@@ -32,8 +32,7 @@ PLAT_INCLUDES		+=	-Iinclude/plat/arm/css/common			\
 				-Iinclude/plat/arm/css/common/aarch64
 
 
-PLAT_BL_COMMON_SOURCES	+=	plat/arm/css/common/aarch64/css_helpers.S	\
-				plat/arm/css/common/css_common.c
+PLAT_BL_COMMON_SOURCES	+=	plat/arm/css/common/aarch64/css_helpers.S
 
 #BL1_SOURCES		+=
 

plat/arm/css/common/css_pm.c

@@ -30,7 +30,6 @@
 
 #include <arch_helpers.h>
 #include <assert.h>
-#include <arm_gic.h>
 #include <cassert.h>
 #include <cci.h>
 #include <css_pm.h>
@@ -41,6 +40,12 @@
 #include <platform_def.h>
 #include "css_scpi.h"
 
+/* Macros to read the CSS power domain state */
+#define CSS_CORE_PWR_STATE(state)	(state)->pwr_domain_state[ARM_PWR_LVL0]
+#define CSS_CLUSTER_PWR_STATE(state)	(state)->pwr_domain_state[ARM_PWR_LVL1]
+#define CSS_SYSTEM_PWR_STATE(state)	((PLAT_MAX_PWR_LVL > ARM_PWR_LVL1) ?\
+				(state)->pwr_domain_state[ARM_PWR_LVL2] : 0)
+
 /* Allow CSS platforms to override `plat_arm_psci_pm_ops` */
 #pragma weak plat_arm_psci_pm_ops
 
@@ -93,51 +98,39 @@ int css_pwr_domain_on(u_register_t mpidr)
 	return PSCI_E_SUCCESS;
 }
 
-/*******************************************************************************
- * Handler called when a power level has just been powered on after
- * being turned off earlier. The target_state encodes the low power state that
- * each level has woken up from.
- ******************************************************************************/
-void css_pwr_domain_on_finish(const psci_power_state_t *target_state)
+static void css_pwr_domain_on_finisher_common(
+		const psci_power_state_t *target_state)
 {
-	assert(target_state->pwr_domain_state[ARM_PWR_LVL0] ==
-						ARM_LOCAL_STATE_OFF);
-
-	if (PLAT_MAX_PWR_LVL > ARM_PWR_LVL1) {
-		/*
-		 * Perform system initialization if woken up from system
-		 * suspend.
-		 */
-		if (target_state->pwr_domain_state[ARM_PWR_LVL2] ==
-							ARM_LOCAL_STATE_OFF)
-			arm_system_pwr_domain_resume();
-	}
+	assert(CSS_CORE_PWR_STATE(target_state) == ARM_LOCAL_STATE_OFF);
 
 	/*
 	 * Perform the common cluster specific operations i.e enable coherency
 	 * if this cluster was off.
 	 */
-	if (target_state->pwr_domain_state[ARM_PWR_LVL1] ==
-						ARM_LOCAL_STATE_OFF)
+	if (CSS_CLUSTER_PWR_STATE(target_state) == ARM_LOCAL_STATE_OFF)
 		cci_enable_snoop_dvm_reqs(MPIDR_AFFLVL1_VAL(read_mpidr_el1()));
+}
+
+/*******************************************************************************
+ * Handler called when a power level has just been powered on after
+ * being turned off earlier. The target_state encodes the low power state that
+ * each level has woken up from. This handler would never be invoked with
+ * the system power domain uninitialized as either the primary would have taken
+ * care of it as part of cold boot or the first core awakened from system
+ * suspend would have already initialized it.
+ ******************************************************************************/
+void css_pwr_domain_on_finish(const psci_power_state_t *target_state)
+{
+	/* Assert that the system power domain need not be initialized */
+	assert(CSS_SYSTEM_PWR_STATE(target_state) == ARM_LOCAL_STATE_RUN);
 
+	css_pwr_domain_on_finisher_common(target_state);
 
-	if (PLAT_MAX_PWR_LVL > ARM_PWR_LVL1) {
-		/*
-		 * Skip GIC CPU interface and per-CPU Distributor interface
-		 * setups if woken up from system suspend as it is done as
-		 * part of css_system_pwr_domain_resume().
-		 */
-		if (target_state->pwr_domain_state[ARM_PWR_LVL2] ==
-							ARM_LOCAL_STATE_OFF)
-			return;
-	}
+	/* Program the gic per-cpu distributor or re-distributor interface */
+	plat_arm_gic_pcpu_init();
 
 	/* Enable the gic cpu interface */
-	arm_gic_cpuif_setup();
-
-	/* todo: Is this setup only needed after a cold boot? */
-	arm_gic_pcpu_distif_setup();
+	plat_arm_gic_cpuif_enable();
 }
 
 /*******************************************************************************
@@ -152,21 +145,14 @@ static void css_power_down_common(const psci_power_state_t *target_state)
 	uint32_t system_state = scpi_power_on;
 
 	/* Prevent interrupts from spuriously waking up this cpu */
-	arm_gic_cpuif_deactivate();
-
-	if (PLAT_MAX_PWR_LVL > ARM_PWR_LVL1) {
-		/*
-		 * Check if power down at system power domain level is
-		 * requested.
-		 */
-		if (target_state->pwr_domain_state[ARM_PWR_LVL2] ==
-							ARM_LOCAL_STATE_OFF)
+	plat_arm_gic_cpuif_disable();
+
+	/* Check if power down at system power domain level is requested */
+	if (CSS_SYSTEM_PWR_STATE(target_state) == ARM_LOCAL_STATE_OFF)
 			system_state = scpi_power_retention;
-	}
 
 	/* Cluster is to be turned off, so disable coherency */
-	if (target_state->pwr_domain_state[ARM_PWR_LVL1] ==
-						ARM_LOCAL_STATE_OFF) {
+	if (CSS_CLUSTER_PWR_STATE(target_state) == ARM_LOCAL_STATE_OFF) {
 		cci_disable_snoop_dvm_reqs(MPIDR_AFFLVL1_VAL(read_mpidr()));
 		cluster_state = scpi_power_off;
 	}
@@ -187,9 +173,7 @@ static void css_power_down_common(const psci_power_state_t *target_state)
  ******************************************************************************/
 void css_pwr_domain_off(const psci_power_state_t *target_state)
 {
-	assert(target_state->pwr_domain_state[ARM_PWR_LVL0] ==
-						ARM_LOCAL_STATE_OFF);
-
+	assert(CSS_CORE_PWR_STATE(target_state) == ARM_LOCAL_STATE_OFF);
 	css_power_down_common(target_state);
 }
 
@@ -200,16 +184,13 @@ void css_pwr_domain_off(const psci_power_state_t *target_state)
 void css_pwr_domain_suspend(const psci_power_state_t *target_state)
 {
 	/*
-	 * Juno has retention only at cpu level. Just return
+	 * CSS currently supports retention only at cpu level. Just return
 	 * as nothing is to be done for retention.
 	 */
-	if (target_state->pwr_domain_state[ARM_PWR_LVL0] ==
-						ARM_LOCAL_STATE_RET)
+	if (CSS_CORE_PWR_STATE(target_state) == ARM_LOCAL_STATE_RET)
 		return;
 
-	assert(target_state->pwr_domain_state[ARM_PWR_LVL0] ==
-						ARM_LOCAL_STATE_OFF);
-
+	assert(CSS_CORE_PWR_STATE(target_state) == ARM_LOCAL_STATE_OFF);
 	css_power_down_common(target_state);
 }
 
@@ -223,14 +204,18 @@ void css_pwr_domain_suspend(const psci_power_state_t *target_state)
 void css_pwr_domain_suspend_finish(
 				const psci_power_state_t *target_state)
 {
-	/*
-	 * Return as nothing is to be done on waking up from retention.
-	 */
-	if (target_state->pwr_domain_state[ARM_PWR_LVL0] ==
-						ARM_LOCAL_STATE_RET)
+	/* Return as nothing is to be done on waking up from retention. */
+	if (CSS_CORE_PWR_STATE(target_state) == ARM_LOCAL_STATE_RET)
 		return;
 
-	css_pwr_domain_on_finish(target_state);
+	/* Perform system domain restore if woken up from system suspend */
+	if (CSS_SYSTEM_PWR_STATE(target_state) == ARM_LOCAL_STATE_OFF)
+		arm_system_pwr_domain_resume();
+	else
+		/* Enable the gic cpu interface */
+		plat_arm_gic_cpuif_enable();
+
+	css_pwr_domain_on_finisher_common(target_state);
 }
 
 /*******************************************************************************

plat/common/plat_gicv2.c

+/*
+ * Copyright (c) 2015, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+#include <assert.h>
+#include <gic_common.h>
+#include <gicv2.h>
+#include <interrupt_mgmt.h>
+
+/*
+ * The following platform GIC functions are weakly defined. They
+ * provide typical implementations that may be re-used by multiple
+ * platforms but may also be overridden by a platform if required.
+ */
+#pragma weak plat_ic_get_pending_interrupt_id
+#pragma weak plat_ic_get_pending_interrupt_type
+#pragma weak plat_ic_acknowledge_interrupt
+#pragma weak plat_ic_get_interrupt_type
+#pragma weak plat_ic_end_of_interrupt
+#pragma weak plat_interrupt_type_to_line
+
+/*
+ * This function returns the highest priority pending interrupt at
+ * the Interrupt controller
+ */
+uint32_t plat_ic_get_pending_interrupt_id(void)
+{
+	unsigned int id;
+
+	id = gicv2_get_pending_interrupt_id();
+	if (id == GIC_SPURIOUS_INTERRUPT)
+		return INTR_ID_UNAVAILABLE;
+
+	return id;
+}
+
+/*
+ * This function returns the type of the highest priority pending interrupt
+ * at the Interrupt controller. In the case of GICv2, the Highest Priority
+ * Pending interrupt register (`GICC_HPPIR`) is read to determine the id of
+ * the pending interrupt. The type of interrupt depends upon the id value
+ * as follows.
+ *   1. id < PENDING_G1_INTID (1022) is reported as a S-EL1 interrupt
+ *   2. id = PENDING_G1_INTID (1022) is reported as a Non-secure interrupt.
+ *   3. id = GIC_SPURIOUS_INTERRUPT (1023) is reported as an invalid interrupt
+ *           type.
+ */
+uint32_t plat_ic_get_pending_interrupt_type(void)
+{
+	unsigned int id;
+
+	id = gicv2_get_pending_interrupt_type();
+
+	/* Assume that all secure interrupts are S-EL1 interrupts */
+	if (id < PENDING_G1_INTID)
+		return INTR_TYPE_S_EL1;
+
+	if (id == GIC_SPURIOUS_INTERRUPT)
+		return INTR_TYPE_INVAL;
+
+	return INTR_TYPE_NS;
+}
+
+/*
+ * This function returns the highest priority pending interrupt at
+ * the Interrupt controller and indicates to the Interrupt controller
+ * that the interrupt processing has started.
+ */
+uint32_t plat_ic_acknowledge_interrupt(void)
+{
+	return gicv2_acknowledge_interrupt();
+}
+
+/*
+ * This function returns the type of the interrupt `id`, depending on how
+ * the interrupt has been configured in the interrupt controller
+ */
+uint32_t plat_ic_get_interrupt_type(uint32_t id)
+{
+	unsigned int type;
+
+	type = gicv2_get_interrupt_group(id);
+
+	/* Assume that all secure interrupts are S-EL1 interrupts */
+	return (type) ? INTR_TYPE_NS : INTR_TYPE_S_EL1;
+}
+
+/*
+ * This functions is used to indicate to the interrupt controller that
+ * the processing of the interrupt corresponding to the `id` has
+ * finished.
+ */
+void plat_ic_end_of_interrupt(uint32_t id)
+{
+	gicv2_end_of_interrupt(id);
+}
+
+/*
+ * An ARM processor signals interrupt exceptions through the IRQ and FIQ pins.
+ * The interrupt controller knows which pin/line it uses to signal a type of
+ * interrupt. It lets the interrupt management framework determine
+ * for a type of interrupt and security state, which line should be used in the
+ * SCR_EL3 to control its routing to EL3. The interrupt line is represented
+ * as the bit position of the IRQ or FIQ bit in the SCR_EL3.
+ */
+uint32_t plat_interrupt_type_to_line(uint32_t type,
+				uint32_t security_state)
+{
+	assert(type == INTR_TYPE_S_EL1 ||
+		       type == INTR_TYPE_EL3 ||
+		       type == INTR_TYPE_NS);
+
+	/* Non-secure interrupts are signaled on the IRQ line always */
+	if (type == INTR_TYPE_NS)
+		return __builtin_ctz(SCR_IRQ_BIT);
+
+	/*
+	 * Secure interrupts are signaled using the IRQ line if the FIQ is
+	 * not enabled else they are signaled using the FIQ line.
+	 */
+	return ((gicv2_is_fiq_enabled()) ? __builtin_ctz(SCR_FIQ_BIT) :
+						__builtin_ctz(SCR_IRQ_BIT));
+}

plat/common/plat_gicv3.c

+/*
+ * Copyright (c) 2015, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+#include <arch_helpers.h>
+#include <assert.h>
+#include <bl_common.h>
+#include <cassert.h>
+#include <gic_common.h>
+#include <gicv3.h>
+#include <interrupt_mgmt.h>
+#include <platform.h>
+
+#if IMAGE_BL31
+
+/*
+ * The following platform GIC functions are weakly defined. They
+ * provide typical implementations that may be re-used by multiple
+ * platforms but may also be overridden by a platform if required.
+ */
+#pragma weak plat_ic_get_pending_interrupt_id
+#pragma weak plat_ic_get_pending_interrupt_type
+#pragma weak plat_ic_acknowledge_interrupt
+#pragma weak plat_ic_get_interrupt_type
+#pragma weak plat_ic_end_of_interrupt
+#pragma weak plat_interrupt_type_to_line
+
+CASSERT((INTR_TYPE_S_EL1 == INTR_GROUP1S) &&
+	(INTR_TYPE_NS == INTR_GROUP1NS) &&
+	(INTR_TYPE_EL3 == INTR_GROUP0), assert_interrupt_type_mismatch);
+
+/*
+ * This function returns the highest priority pending interrupt at
+ * the Interrupt controller
+ */
+uint32_t plat_ic_get_pending_interrupt_id(void)
+{
+	unsigned int irqnr;
+
+	assert(IS_IN_EL3());
+	irqnr = gicv3_get_pending_interrupt_id();
+	return (gicv3_is_intr_id_special_identifier(irqnr)) ?
+				INTR_ID_UNAVAILABLE : irqnr;
+}
+
+/*
+ * This function returns the type of the highest priority pending interrupt
+ * at the Interrupt controller. In the case of GICv3, the Highest Priority
+ * Pending interrupt system register (`ICC_HPPIR0_EL1`) is read to determine
+ * the id of the pending interrupt. The type of interrupt depends upon the
+ * id value as follows.
+ *   1. id = PENDING_G1S_INTID (1020) is reported as a S-EL1 interrupt
+ *   2. id = PENDING_G1NS_INTID (1021) is reported as a Non-secure interrupt.
+ *   3. id = GIC_SPURIOUS_INTERRUPT (1023) is reported as an invalid interrupt
+ *           type.
+ *   4. All other interrupt id's are reported as EL3 interrupt.
+ */
+uint32_t plat_ic_get_pending_interrupt_type(void)
+{
+	unsigned int irqnr;
+
+	assert(IS_IN_EL3());
+	irqnr = gicv3_get_pending_interrupt_type();
+
+	switch (irqnr) {
+	case PENDING_G1S_INTID:
+		return INTR_TYPE_S_EL1;
+	case PENDING_G1NS_INTID:
+		return INTR_TYPE_NS;
+	case GIC_SPURIOUS_INTERRUPT:
+		return INTR_TYPE_INVAL;
+	default:
+		return INTR_TYPE_EL3;
+	}
+}
+
+/*
+ * This function returns the highest priority pending interrupt at
+ * the Interrupt controller and indicates to the Interrupt controller
+ * that the interrupt processing has started.
+ */
+uint32_t plat_ic_acknowledge_interrupt(void)
+{
+	assert(IS_IN_EL3());
+	return gicv3_acknowledge_interrupt();
+}
+
+/*
+ * This function returns the type of the interrupt `id`, depending on how
+ * the interrupt has been configured in the interrupt controller
+ */
+uint32_t plat_ic_get_interrupt_type(uint32_t id)
+{
+	assert(IS_IN_EL3());
+	return gicv3_get_interrupt_type(id, plat_my_core_pos());
+}
+
+/*
+ * This functions is used to indicate to the interrupt controller that
+ * the processing of the interrupt corresponding to the `id` has
+ * finished.
+ */
+void plat_ic_end_of_interrupt(uint32_t id)
+{
+	assert(IS_IN_EL3());
+	gicv3_end_of_interrupt(id);
+}
+
+/*
+ * An ARM processor signals interrupt exceptions through the IRQ and FIQ pins.
+ * The interrupt controller knows which pin/line it uses to signal a type of
+ * interrupt. It lets the interrupt management framework determine for a type of
+ * interrupt and security state, which line should be used in the SCR_EL3 to
+ * control its routing to EL3. The interrupt line is represented as the bit
+ * position of the IRQ or FIQ bit in the SCR_EL3.
+ */
+uint32_t plat_interrupt_type_to_line(uint32_t type,
+				uint32_t security_state)
+{
+	assert(type == INTR_TYPE_S_EL1 ||
+	       type == INTR_TYPE_EL3 ||
+	       type == INTR_TYPE_NS);
+
+	assert(sec_state_is_valid(security_state));
+	assert(IS_IN_EL3());
+
+	switch (type) {
+	case INTR_TYPE_S_EL1:
+		/*
+		 * The S-EL1 interrupts are signaled as IRQ in S-EL0/1 contexts
+		 * and as FIQ in the NS-EL0/1/2 contexts
+		 */
+		if (security_state == SECURE)
+			return __builtin_ctz(SCR_IRQ_BIT);
+		else
+			return __builtin_ctz(SCR_FIQ_BIT);
+	case INTR_TYPE_NS:
+		/*
+		 * The Non secure interrupts will be signaled as FIQ in S-EL0/1
+		 * contexts and as IRQ in the NS-EL0/1/2 contexts.
+		 */
+		if (security_state == SECURE)
+			return __builtin_ctz(SCR_FIQ_BIT);
+		else
+			return __builtin_ctz(SCR_IRQ_BIT);
+	default:
+		assert(0);
+		/* Fall through in the release build */
+	case INTR_TYPE_EL3:
+		/*
+		 * The EL3 interrupts are signaled as FIQ in both S-EL0/1 and
+		 * NS-EL0/1/2 contexts
+		 */
+		return __builtin_ctz(SCR_FIQ_BIT);
+	}
+}
+#endif
+#if IMAGE_BL32
+
+#pragma weak plat_ic_get_pending_interrupt_id
+#pragma weak plat_ic_acknowledge_interrupt
+#pragma weak plat_ic_end_of_interrupt
+
+/*
+ * This function returns the highest priority pending interrupt at
+ * the Interrupt controller
+ */
+uint32_t plat_ic_get_pending_interrupt_id(void)
+{
+	unsigned int irqnr;
+
+	assert(IS_IN_EL1());
+	irqnr = gicv3_get_pending_interrupt_id_sel1();
+	return (irqnr == GIC_SPURIOUS_INTERRUPT) ?
+				INTR_ID_UNAVAILABLE : irqnr;
+}
+
+/*
+ * This function returns the highest priority pending interrupt at
+ * the Interrupt controller and indicates to the Interrupt controller
+ * that the interrupt processing has started.
+ */
+uint32_t plat_ic_acknowledge_interrupt(void)
+{
+	assert(IS_IN_EL1());
+	return gicv3_acknowledge_interrupt_sel1();
+}
+
+/*
+ * This functions is used to indicate to the interrupt controller that
+ * the processing of the interrupt corresponding to the `id` has
+ * finished.
+ */
+void plat_ic_end_of_interrupt(uint32_t id)
+{
+	assert(IS_IN_EL1());
+	gicv3_end_of_interrupt_sel1(id);
+}
+#endif