Add bl2 setup code common across Broadcom platforms

Signed-off-by: Sheetal Tigadoli <sheetal.tigadoli@broadcom.com>
Change-Id: Iabeaee35c22608c93945c8295bf70947b0f6049a

plat/brcm/board/stingray/platform.mk

+#
+# Copyright (c) 2019-2020, Broadcom
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+# Enable workaround for ERRATA_A72_859971
+ERRATA_A72_859971 := 1
+
+# Cache Coherency Interconnect Driver needed
+DRIVER_CC_ENABLE := 1
+$(eval $(call add_define,DRIVER_CC_ENABLE))
+
+USE_CRMU_SRAM := yes
+
+# Use single cluster
+ifeq (${USE_SINGLE_CLUSTER},yes)
+$(info Using Single Cluster)
+$(eval $(call add_define,USE_SINGLE_CLUSTER))
+endif
+
+ifeq (${BOARD_CFG},)
+BOARD_CFG := bcm958742k
+endif
+
+# For testing purposes, use memsys stubs.  Remove once memsys is fully tested.
+USE_MEMSYS_STUBS := yes
+
+# Default, use BL1_RW area
+ifneq (${BL2_USE_BL1_RW},no)
+$(eval $(call add_define,USE_BL1_RW))
+endif
+
+# Default soft reset is L3
+$(eval $(call add_define,CONFIG_SOFT_RESET_L3))
+
+include plat/brcm/board/common/board_common.mk
+
+SOC_DIR			:= 	brcm/board/stingray
+
+PLAT_INCLUDES		+=	-Iplat/${SOC_DIR}/include/ \
+				-Iinclude/plat/brcm/common/ \
+				-Iplat/brcm/common/
+
+PLAT_BL_COMMON_SOURCES	+=	lib/cpus/aarch64/cortex_a72.S \
+				plat/${SOC_DIR}/aarch64/plat_helpers.S \
+				drivers/ti/uart/aarch64/16550_console.S \
+				drivers/arm/tzc/tzc400.c

plat/brcm/common/brcm_bl2_mem_params_desc.c

+/*
+ * Copyright (c) 2019-2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <common/bl_common.h>
+#include <common/desc_image_load.h>
+#include <plat/common/platform.h>
+
+#include <platform_def.h>
+
+/*******************************************************************************
+ * Following descriptor provides BL image/ep information that gets used
+ * by BL2 to load the images and also subset of this information is
+ * passed to next BL image. The image loading sequence is managed by
+ * populating the images in required loading order. The image execution
+ * sequence is managed by populating the `next_handoff_image_id` with
+ * the next executable image id.
+ ******************************************************************************/
+static bl_mem_params_node_t bl2_mem_params_descs[] = {
+#ifdef SCP_BL2_BASE
+	/* Fill SCP_BL2 related information if it exists */
+	{
+	    .image_id = SCP_BL2_IMAGE_ID,
+
+	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
+		    VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
+
+	    SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
+		    VERSION_2, image_info_t, 0),
+	    .image_info.image_base = SCP_BL2_BASE,
+	    .image_info.image_max_size = PLAT_MAX_SCP_BL2_SIZE,
+
+	    .next_handoff_image_id = INVALID_IMAGE_ID,
+	},
+#endif /* SCP_BL2_BASE */
+
+	/* Fill BL31 related information */
+	{
+	    .image_id = BL31_IMAGE_ID,
+
+	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+		    VERSION_2, entry_point_info_t,
+		    SECURE | EXECUTABLE | EP_FIRST_EXE),
+	    .ep_info.pc = BL31_BASE,
+	    .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
+		    DISABLE_ALL_EXCEPTIONS),
+#if DEBUG
+	    .ep_info.args.arg3 = BRCM_BL31_PLAT_PARAM_VAL,
+#endif
+
+	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+		    VERSION_2, image_info_t, IMAGE_ATTRIB_PLAT_SETUP),
+	    .image_info.image_base = BL31_BASE,
+	    .image_info.image_max_size = BL31_LIMIT - BL31_BASE,
+
+#ifdef BL32_BASE
+	    .next_handoff_image_id = BL32_IMAGE_ID,
+#else
+	    .next_handoff_image_id = BL33_IMAGE_ID,
+#endif
+	},
+
+#ifdef BL32_BASE
+	/* Fill BL32 related information */
+	{
+	    .image_id = BL32_IMAGE_ID,
+
+	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+		    VERSION_2, entry_point_info_t, SECURE | EXECUTABLE),
+	    .ep_info.pc = BL32_BASE,
+
+	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+		    VERSION_2, image_info_t, 0),
+	    .image_info.image_base = BL32_BASE,
+	    .image_info.image_max_size = BL32_LIMIT - BL32_BASE,
+
+	    .next_handoff_image_id = BL33_IMAGE_ID,
+	},
+#endif /* BL32_BASE */
+
+	/* Fill BL33 related information */
+	{
+	    .image_id = BL33_IMAGE_ID,
+	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+		    VERSION_2, entry_point_info_t, NON_SECURE | EXECUTABLE),
+#ifdef PRELOADED_BL33_BASE
+	    .ep_info.pc = PRELOADED_BL33_BASE,
+
+	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+		    VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+#else
+	    .ep_info.pc = PLAT_BRCM_NS_IMAGE_OFFSET,
+
+	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+		    VERSION_2, image_info_t, 0),
+	    .image_info.image_base = PLAT_BRCM_NS_IMAGE_OFFSET,
+	    .image_info.image_max_size = BRCM_DRAM1_SIZE,
+#endif /* PRELOADED_BL33_BASE */
+
+	    .next_handoff_image_id = INVALID_IMAGE_ID,
+	}
+};
+
+REGISTER_BL_IMAGE_DESCS(bl2_mem_params_descs)

plat/brcm/common/brcm_bl2_setup.c

+/*
+ * Copyright (c) 2019-2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <string.h>
+
+#include <arch_helpers.h>
+#include <common/bl_common.h>
+#include <common/debug.h>
+#include <common/desc_image_load.h>
+#include <drivers/arm/sp804_delay_timer.h>
+#include <lib/mmio.h>
+
+#include <bcm_console.h>
+#include <platform_def.h>
+#include <plat/brcm/common/plat_brcm.h>
+
+/* Data structure which holds the extents of the trusted SRAM for BL2 */
+static meminfo_t bl2_tzram_layout __aligned(CACHE_WRITEBACK_GRANULE);
+
+/* Weak definitions may be overridden in specific BRCM platform */
+#pragma weak plat_bcm_bl2_platform_setup
+#pragma weak plat_bcm_bl2_plat_arch_setup
+#pragma weak plat_bcm_security_setup
+#pragma weak plat_bcm_bl2_plat_handle_scp_bl2
+#pragma weak plat_bcm_bl2_early_platform_setup
+
+void plat_bcm_bl2_early_platform_setup(void)
+{
+}
+
+void plat_bcm_bl2_platform_setup(void)
+{
+}
+
+void plat_bcm_bl2_plat_arch_setup(void)
+{
+}
+
+void plat_bcm_security_setup(void)
+{
+}
+
+void bcm_bl2_early_platform_setup(uintptr_t tb_fw_config,
+				  meminfo_t *mem_layout)
+{
+	/* Initialize the console to provide early debug support */
+	bcm_console_boot_init();
+
+	/* Setup the BL2 memory layout */
+	bl2_tzram_layout = *mem_layout;
+
+	/* Initialise the IO layer and register platform IO devices */
+	plat_brcm_io_setup();
+
+	/* Log HW reset event */
+	INFO("RESET: 0x%x\n",
+		mmio_read_32(CRMU_RESET_EVENT_LOG));
+}
+
+void bl2_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+			       u_register_t arg2, u_register_t arg3)
+{
+	/* SoC specific setup */
+	plat_bcm_bl2_early_platform_setup();
+
+	/* Initialize delay timer driver using SP804 dual timer 0 */
+	sp804_timer_init(SP804_TIMER0_BASE,
+			 SP804_TIMER0_CLKMULT, SP804_TIMER0_CLKDIV);
+
+	/* BRCM platforms generic setup */
+	bcm_bl2_early_platform_setup((uintptr_t)arg0, (meminfo_t *)arg1);
+}
+
+/*
+ * Perform Broadcom platform setup.
+ */
+void bcm_bl2_platform_setup(void)
+{
+	/* Initialize the secure environment */
+	plat_bcm_security_setup();
+}
+
+void bl2_platform_setup(void)
+{
+	bcm_bl2_platform_setup();
+	plat_bcm_bl2_platform_setup();
+}
+
+/*******************************************************************************
+ * Perform the very early platform specific architectural setup here. At the
+ * moment this is only initializes the mmu in a quick and dirty way.
+ ******************************************************************************/
+void bcm_bl2_plat_arch_setup(void)
+{
+#ifndef MMU_DISABLED
+	if (!(read_sctlr_el1() & SCTLR_M_BIT)) {
+		const mmap_region_t bl_regions[] = {
+			MAP_REGION_FLAT(bl2_tzram_layout.total_base,
+					bl2_tzram_layout.total_size,
+					MT_MEMORY | MT_RW | MT_SECURE),
+			MAP_REGION_FLAT(BL_CODE_BASE,
+					BL_CODE_END - BL_CODE_BASE,
+					MT_CODE | MT_SECURE),
+			MAP_REGION_FLAT(BL_RO_DATA_BASE,
+					BL_RO_DATA_END - BL_RO_DATA_BASE,
+					MT_RO_DATA | MT_SECURE),
+#if USE_COHERENT_MEM
+			MAP_REGION_FLAT(BL_COHERENT_RAM_BASE,
+					BL_COHERENT_RAM_END -
+					BL_COHERENT_RAM_BASE,
+					MT_DEVICE | MT_RW | MT_SECURE),
+#endif
+			{0}
+		};
+
+		setup_page_tables(bl_regions, plat_brcm_get_mmap());
+		enable_mmu_el1(0);
+	}
+#endif
+}
+
+void bl2_plat_arch_setup(void)
+{
+#ifdef ENA_MMU_BEFORE_DDR_INIT
+	/*
+	 * Once MMU is enabled before DDR, MEMORY TESTS
+	 * get affected as read/write transaction might occures from
+	 * caches. So For running memory test, one should not set this
+	 * flag.
+	 */
+	bcm_bl2_plat_arch_setup();
+	plat_bcm_bl2_plat_arch_setup();
+#else
+	plat_bcm_bl2_plat_arch_setup();
+	bcm_bl2_plat_arch_setup();
+#endif
+}
+
+int bcm_bl2_handle_post_image_load(unsigned int image_id)
+{
+	int err = 0;
+
+	bl_mem_params_node_t *bl_mem_params = get_bl_mem_params_node(image_id);
+
+	assert(bl_mem_params);
+
+	switch (image_id) {
+	case BL32_IMAGE_ID:
+		bl_mem_params->ep_info.spsr = brcm_get_spsr_for_bl32_entry();
+		break;
+
+	case BL33_IMAGE_ID:
+		/* BL33 expects to receive the primary CPU MPID (through r0) */
+		bl_mem_params->ep_info.args.arg0 = 0xffff & read_mpidr();
+		bl_mem_params->ep_info.spsr = brcm_get_spsr_for_bl33_entry();
+		break;
+
+#ifdef SCP_BL2_BASE
+	case SCP_BL2_IMAGE_ID:
+		/* The subsequent handling of SCP_BL2 is platform specific */
+		err = bcm_bl2_handle_scp_bl2(&bl_mem_params->image_info);
+		if (err)
+			WARN("Failure in platform-specific handling of SCP_BL2 image.\n");
+		break;
+#endif
+	default:
+		/* Do nothing in default case */
+		break;
+	}
+
+	return err;
+}
+
+/*******************************************************************************
+ * This function can be used by the platforms to update/use image
+ * information for given `image_id`.
+ ******************************************************************************/
+int bcm_bl2_plat_handle_post_image_load(unsigned int image_id)
+{
+	return bcm_bl2_handle_post_image_load(image_id);
+}
+
+int bl2_plat_handle_post_image_load(unsigned int image_id)
+{
+	return bcm_bl2_plat_handle_post_image_load(image_id);
+}
+
+#ifdef SCP_BL2_BASE
+int plat_bcm_bl2_plat_handle_scp_bl2(image_info_t *scp_bl2_image_info)
+{
+	return 0;
+}
+
+int bcm_bl2_handle_scp_bl2(image_info_t *scp_bl2_image_info)
+{
+	return plat_bcm_bl2_plat_handle_scp_bl2(scp_bl2_image_info);
+}
+#endif

plat/brcm/common/brcm_common.c

+/*
+ * Copyright (c) 2019-2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include <arch.h>
+#include <arch_helpers.h>
+#include <common/debug.h>
+#include <plat/common/platform.h>
+
+#include <plat_brcm.h>
+#include <platform_def.h>
+
+/* Weak definitions may be overridden in specific BRCM platform */
+#pragma weak plat_get_ns_image_entrypoint
+#pragma weak plat_brcm_get_mmap
+
+uintptr_t plat_get_ns_image_entrypoint(void)
+{
+#ifdef PRELOADED_BL33_BASE
+	return PRELOADED_BL33_BASE;
+#else
+	return PLAT_BRCM_NS_IMAGE_OFFSET;
+#endif
+}
+
+uint32_t brcm_get_spsr_for_bl32_entry(void)
+{
+	/*
+	 * The Secure Payload Dispatcher service is responsible for
+	 * setting the SPSR prior to entry into the BL32 image.
+	 */
+	return 0;
+}
+
+uint32_t brcm_get_spsr_for_bl33_entry(void)
+{
+	unsigned int mode;
+	uint32_t spsr;
+
+	/* Figure out what mode we enter the non-secure world in */
+	mode = el_implemented(2) ? MODE_EL2 : MODE_EL1;
+
+	/*
+	 * TODO: Consider the possibility of specifying the SPSR in
+	 * the FIP ToC and allowing the platform to have a say as
+	 * well.
+	 */
+	spsr = SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
+	return spsr;
+}
+
+const mmap_region_t *plat_brcm_get_mmap(void)
+{
+	return plat_brcm_mmap;
+}

plat/brcm/common/brcm_image_load.c

+/*
+ * Copyright (c) 2019-2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <common/bl_common.h>
+#include <common/desc_image_load.h>
+#include <plat/common/platform.h>
+
+#pragma weak plat_flush_next_bl_params
+#pragma weak plat_get_bl_image_load_info
+#pragma weak plat_get_next_bl_params
+
+/*******************************************************************************
+ * This function flushes the data structures so that they are visible
+ * in memory for the next BL image.
+ ******************************************************************************/
+void plat_flush_next_bl_params(void)
+{
+	flush_bl_params_desc();
+}
+
+/*******************************************************************************
+ * This function returns the list of loadable images.
+ ******************************************************************************/
+struct bl_load_info *plat_get_bl_image_load_info(void)
+{
+	return get_bl_load_info_from_mem_params_desc();
+}
+
+/*******************************************************************************
+ * This function returns the list of executable images.
+ ******************************************************************************/
+struct bl_params *plat_get_next_bl_params(void)
+{
+	bl_params_t *next_bl_params = get_next_bl_params_from_mem_params_desc();
+
+	populate_next_bl_params_config(next_bl_params);
+	return next_bl_params;
+}

plat/brcm/common/brcm_io_storage.c

+/*
+ * Copyright (c) 2019-2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <string.h>
+
+#include <common/debug.h>
+#include <drivers/io/io_driver.h>
+#include <drivers/io/io_fip.h>
+#include <drivers/io/io_memmap.h>
+#include <drivers/io/io_storage.h>
+#include <tools_share/firmware_image_package.h>
+
+#include <cmn_plat_def.h>
+#include <cmn_plat_util.h>
+#include <plat_brcm.h>
+#include <platform_def.h>
+
+/* IO devices */
+static const io_dev_connector_t *fip_dev_con;
+static uintptr_t fip_dev_handle;
+static const io_dev_connector_t *memmap_dev_con;
+static uintptr_t memmap_dev_handle;
+
+static const io_block_spec_t fip_block_spec = {
+	.offset = PLAT_BRCM_FIP_BASE,
+	.length = PLAT_BRCM_FIP_MAX_SIZE
+};
+
+static const io_block_spec_t qspi_fip_block_spec = {
+	.offset = PLAT_BRCM_FIP_QSPI_BASE,
+	.length = PLAT_BRCM_FIP_MAX_SIZE
+};
+
+static const io_block_spec_t nand_fip_block_spec = {
+	.offset = PLAT_BRCM_FIP_NAND_BASE,
+	.length = PLAT_BRCM_FIP_MAX_SIZE
+};
+
+static const io_uuid_spec_t bl2_uuid_spec = {
+	.uuid = UUID_TRUSTED_BOOT_FIRMWARE_BL2,
+};
+
+static const io_uuid_spec_t scp_bl2_uuid_spec = {
+	.uuid = UUID_SCP_FIRMWARE_SCP_BL2,
+};
+
+static const io_uuid_spec_t bl31_uuid_spec = {
+	.uuid = UUID_EL3_RUNTIME_FIRMWARE_BL31,
+};
+
+static const io_uuid_spec_t bl32_uuid_spec = {
+	.uuid = UUID_SECURE_PAYLOAD_BL32,
+};
+
+static const io_uuid_spec_t bl32_extra1_uuid_spec = {
+	.uuid = UUID_SECURE_PAYLOAD_BL32_EXTRA1,
+};
+
+static const io_uuid_spec_t bl32_extra2_uuid_spec = {
+	.uuid = UUID_SECURE_PAYLOAD_BL32_EXTRA2,
+};
+
+static const io_uuid_spec_t bl33_uuid_spec = {
+	.uuid = UUID_NON_TRUSTED_FIRMWARE_BL33,
+};
+
+static const io_uuid_spec_t tb_fw_config_uuid_spec = {
+	.uuid = UUID_TB_FW_CONFIG,
+};
+
+static const io_uuid_spec_t hw_config_uuid_spec = {
+	.uuid = UUID_HW_CONFIG,
+};
+
+static const io_uuid_spec_t soc_fw_config_uuid_spec = {
+	.uuid = UUID_SOC_FW_CONFIG,
+};
+
+static const io_uuid_spec_t tos_fw_config_uuid_spec = {
+	.uuid = UUID_TOS_FW_CONFIG,
+};
+
+static const io_uuid_spec_t nt_fw_config_uuid_spec = {
+	.uuid = UUID_NT_FW_CONFIG,
+};
+
+#if TRUSTED_BOARD_BOOT
+static const io_uuid_spec_t tb_fw_cert_uuid_spec = {
+	.uuid = UUID_TRUSTED_BOOT_FW_CERT,
+};
+
+static const io_uuid_spec_t trusted_key_cert_uuid_spec = {
+	.uuid = UUID_TRUSTED_KEY_CERT,
+};
+
+static const io_uuid_spec_t scp_fw_key_cert_uuid_spec = {
+	.uuid = UUID_SCP_FW_KEY_CERT,
+};
+
+static const io_uuid_spec_t soc_fw_key_cert_uuid_spec = {
+	.uuid = UUID_SOC_FW_KEY_CERT,
+};
+
+static const io_uuid_spec_t tos_fw_key_cert_uuid_spec = {
+	.uuid = UUID_TRUSTED_OS_FW_KEY_CERT,
+};
+
+static const io_uuid_spec_t nt_fw_key_cert_uuid_spec = {
+	.uuid = UUID_NON_TRUSTED_FW_KEY_CERT,
+};
+
+static const io_uuid_spec_t scp_fw_cert_uuid_spec = {
+	.uuid = UUID_SCP_FW_CONTENT_CERT,
+};
+
+static const io_uuid_spec_t soc_fw_cert_uuid_spec = {
+	.uuid = UUID_SOC_FW_CONTENT_CERT,
+};
+
+static const io_uuid_spec_t tos_fw_cert_uuid_spec = {
+	.uuid = UUID_TRUSTED_OS_FW_CONTENT_CERT,
+};
+
+static const io_uuid_spec_t nt_fw_cert_uuid_spec = {
+	.uuid = UUID_NON_TRUSTED_FW_CONTENT_CERT,
+};
+#endif /* TRUSTED_BOARD_BOOT */
+
+static int open_fip(const uintptr_t spec);
+static int open_memmap(const uintptr_t spec);
+static int open_qspi(const uintptr_t spec);
+static int open_nand(const uintptr_t spec);
+
+struct plat_io_policy {
+	uintptr_t *dev_handle;
+	uintptr_t image_spec;
+	int (*check)(const uintptr_t spec);
+};
+
+/* By default, BRCM platforms load images from the FIP */
+static const struct plat_io_policy policies[] = {
+	[FIP_IMAGE_ID] = {
+		&memmap_dev_handle,
+		(uintptr_t)&fip_block_spec,
+		open_memmap
+	},
+	[BL2_IMAGE_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&bl2_uuid_spec,
+		open_fip
+	},
+	[SCP_BL2_IMAGE_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&scp_bl2_uuid_spec,
+		open_fip
+	},
+	[BL31_IMAGE_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&bl31_uuid_spec,
+		open_fip
+	},
+	[BL32_IMAGE_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&bl32_uuid_spec,
+		open_fip
+	},
+	[BL32_EXTRA1_IMAGE_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&bl32_extra1_uuid_spec,
+		open_fip
+	},
+	[BL32_EXTRA2_IMAGE_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&bl32_extra2_uuid_spec,
+		open_fip
+	},
+	[BL33_IMAGE_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&bl33_uuid_spec,
+		open_fip
+	},
+	[TB_FW_CONFIG_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&tb_fw_config_uuid_spec,
+		open_fip
+	},
+	[HW_CONFIG_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&hw_config_uuid_spec,
+		open_fip
+	},
+	[SOC_FW_CONFIG_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&soc_fw_config_uuid_spec,
+		open_fip
+	},
+	[TOS_FW_CONFIG_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&tos_fw_config_uuid_spec,
+		open_fip
+	},
+	[NT_FW_CONFIG_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&nt_fw_config_uuid_spec,
+		open_fip
+	},
+#if TRUSTED_BOARD_BOOT
+	[TRUSTED_BOOT_FW_CERT_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&tb_fw_cert_uuid_spec,
+		open_fip
+	},
+	[TRUSTED_KEY_CERT_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&trusted_key_cert_uuid_spec,
+		open_fip
+	},
+	[SCP_FW_KEY_CERT_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&scp_fw_key_cert_uuid_spec,
+		open_fip
+	},
+	[SOC_FW_KEY_CERT_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&soc_fw_key_cert_uuid_spec,
+		open_fip
+	},
+	[TRUSTED_OS_FW_KEY_CERT_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&tos_fw_key_cert_uuid_spec,
+		open_fip
+	},
+	[NON_TRUSTED_FW_KEY_CERT_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&nt_fw_key_cert_uuid_spec,
+		open_fip
+	},
+	[SCP_FW_CONTENT_CERT_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&scp_fw_cert_uuid_spec,
+		open_fip
+	},
+	[SOC_FW_CONTENT_CERT_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&soc_fw_cert_uuid_spec,
+		open_fip
+	},
+	[TRUSTED_OS_FW_CONTENT_CERT_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&tos_fw_cert_uuid_spec,
+		open_fip
+	},
+	[NON_TRUSTED_FW_CONTENT_CERT_ID] = {
+		&fip_dev_handle,
+		(uintptr_t)&nt_fw_cert_uuid_spec,
+		open_fip
+	},
+#endif /* TRUSTED_BOARD_BOOT */
+};
+
+/* By default, BRCM platforms load images from the FIP */
+static const struct plat_io_policy boot_source_policies[] = {
+	[BOOT_SOURCE_QSPI] = {
+		&memmap_dev_handle,
+		(uintptr_t)&qspi_fip_block_spec,
+		open_qspi
+	},
+	[BOOT_SOURCE_NAND] = {
+		&memmap_dev_handle,
+		(uintptr_t)&nand_fip_block_spec,
+		open_nand
+	},
+};
+
+/* Weak definitions may be overridden in specific brcm platform */
+#pragma weak plat_brcm_io_setup
+#pragma weak plat_brcm_process_flags
+
+static int open_fip(const uintptr_t spec)
+{
+	int result;
+	uintptr_t local_image_handle;
+
+	/* See if a Firmware Image Package is available */
+	result = io_dev_init(fip_dev_handle, (uintptr_t)FIP_IMAGE_ID);
+	if (result == 0) {
+		result = io_open(fip_dev_handle, spec, &local_image_handle);
+		if (result == 0) {
+			VERBOSE("Using FIP\n");
+			io_close(local_image_handle);
+		}
+	}
+	return result;
+}
+
+
+static int open_memmap(const uintptr_t spec)
+{
+	int result;
+	uintptr_t local_image_handle;
+
+	result = io_dev_init(memmap_dev_handle, (uintptr_t)NULL);
+	if (result == 0) {
+		result = io_open(memmap_dev_handle, spec, &local_image_handle);
+		if (result == 0) {
+			VERBOSE("Using Memmap\n");
+			io_close(local_image_handle);
+		}
+	}
+	return result;
+}
+
+static int open_qspi(const uintptr_t spec)
+{
+	return open_memmap(spec);
+}
+
+static int open_nand(const uintptr_t spec)
+{
+	return open_memmap(spec);
+}
+
+
+void brcm_io_setup(void)
+{
+	int io_result;
+	uint32_t boot_source;
+
+	io_result = register_io_dev_fip(&fip_dev_con);
+	assert(io_result == 0);
+
+	io_result = register_io_dev_memmap(&memmap_dev_con);
+	assert(io_result == 0);
+
+	/* Open connections to devices and cache the handles */
+	io_result = io_dev_open(fip_dev_con, (uintptr_t)NULL,
+				&fip_dev_handle);
+	assert(io_result == 0);
+
+	boot_source = boot_source_get();
+	switch (boot_source) {
+	case BOOT_SOURCE_QSPI:
+	case BOOT_SOURCE_NAND:
+	default:
+		io_result = io_dev_open(memmap_dev_con, (uintptr_t)NULL,
+					&memmap_dev_handle);
+		break;
+	}
+	assert(io_result == 0);
+
+	/* Ignore improbable errors in release builds */
+	(void)io_result;
+}
+
+void plat_brcm_io_setup(void)
+{
+	brcm_io_setup();
+}
+
+void plat_brcm_process_flags(uint16_t plat_toc_flags __unused)
+{
+	WARN("%s not implemented\n", __func__);
+}
+
+/*
+ * Return an IO device handle and specification which can be used to access
+ * an image. Use this to enforce platform load policy
+ */
+int plat_get_image_source(unsigned int image_id, uintptr_t *dev_handle,
+			  uintptr_t *image_spec)
+{
+	int result;
+	const struct plat_io_policy *policy;
+	uint32_t boot_source;
+	uint16_t lcl_plat_toc_flg;
+
+	assert(image_id < ARRAY_SIZE(policies));
+
+	boot_source = boot_source_get();
+	if (image_id == FIP_IMAGE_ID)
+		policy = &boot_source_policies[boot_source];
+	else
+		policy = &policies[image_id];
+
+	result = policy->check(policy->image_spec);
+	if (result == 0) {
+		*image_spec = policy->image_spec;
+		*dev_handle = *(policy->dev_handle);
+
+		if (image_id == TRUSTED_BOOT_FW_CERT_ID) {
+			/*
+			 * Process the header flags to perform
+			 * such custom actions as speeding up PLL.
+			 * CERT seems to be the first image accessed
+			 * by BL1 so this is where we process the flags.
+			 */
+			fip_dev_get_plat_toc_flag((io_dev_info_t *)fip_dev_handle,
+						  &lcl_plat_toc_flg);
+			plat_brcm_process_flags(lcl_plat_toc_flg);
+		}
+	}
+
+	return result;
+}