Merge changes I80316689,I23cac4fb,If911e7de,I169ff358,I4e040cd5, ... into integration

* changes:
  ddr: a80x0: add DDR 32-bit ECC mode support
  ble: ap807: improve PLL configuration sequence
  ble: ap807: clean-up PLL configuration sequence
  ddr: a80x0: add DDR 32-bit mode support
  plat: marvell: mci: perform mci link tuning for all mci interfaces
  plat: marvell: mci: use more meaningful name for mci link tuning
  plat: marvell: a8k: remove wrong or unnecessary comments
  plat: marvell: ap807: enable snoop filter for ap807
  plat: marvell: ap807: update configuration space of each CP
  plat: marvell: ap807: use correct address for MCIx4 register
  plat: marvell: add support for PLL 2.2GHz mode
  plat: marvell: armada: make a8k_common.mk and mss_common.mk more generic
  marvell: armada: add extra level in marvell platform hierarchy

plat/marvell/common/mss/mss_common.mk → plat/marvell/armada/common/mss/mss_common.mk

@@ -6,14 +6,14 @@
 #
 
 
-PLAT_MARVELL		:= 	plat/marvell
+PLAT_MARVELL		:= 	plat/marvell/armada
 MSS_SOURCE		:= 	$(PLAT_MARVELL)/common/mss
 
 BL2_SOURCES		+=	$(MSS_SOURCE)/mss_scp_bootloader.c		\
 				$(PLAT_MARVELL)/common/plat_delay_timer.c	\
 				drivers/delay_timer/delay_timer.c		\
 				$(MARVELL_DRV)					\
-				$(PLAT_FAMILY_BASE)/$(PLAT)/board/marvell_plat_config.c
+				$(BOARD_DIR)/board/marvell_plat_config.c
 
 BL31_SOURCES		+=	$(MSS_SOURCE)/mss_ipc_drv.c
 

plat/marvell/marvell.mk

@@ -16,6 +16,10 @@ $(eval $(call add_define,MARVELL_SECURE_BOOT))
 PALLADIUM			:= 0
 $(eval $(call add_define,PALLADIUM))
 
+# Set board to work with DDR 32bit
+DDR32				:= 0
+$(eval $(call add_define,DDR32))
+
 ifeq (${MARVELL_SECURE_BOOT},1)
 DOIMAGE_SEC_FLAGS := -c $(DOIMAGE_SEC)
 DOIMAGE_LIBS_CHECK = \