Merge pull request #1211 from Leo-Yan/remove_ca73_cpu_nap_state

Hikey960: Remove ca73 cpu nap state

plat/hisilicon/hikey960/aarch64/hikey960_helpers.S

@@ -16,8 +16,6 @@
 	.globl	plat_crash_console_putc
 	.globl	plat_report_exception
 	.globl	plat_reset_handler
-	.globl	set_retention_ticks
-	.globl	clr_retention_ticks
 	.globl	clr_ex
 	.globl	nop
 
@@ -138,35 +136,6 @@ func plat_reset_handler
 	ret
 endfunc plat_reset_handler
 
-	/* -----------------------------------------------------
-	 * void set_retention_ticks(unsigned int val);
-	 * Clobber list : x0
-	 * -----------------------------------------------------
-	 */
-func set_retention_ticks
-	mrs	x0, CORTEX_A53_ECTLR_EL1
-	bic	x0, x0, #CORTEX_A53_ECTLR_CPU_RET_CTRL_MASK
-	orr	x0, x0, #RETENTION_ENTRY_TICKS_8
-	msr	CORTEX_A53_ECTLR_EL1, x0
-	isb
-	dsb	sy
-	ret
-endfunc set_retention_ticks
-
-	/* -----------------------------------------------------
-	 * void clr_retention_ticks(unsigned int val);
-	 * Clobber list : x0
-	 * -----------------------------------------------------
-	 */
-func clr_retention_ticks
-	mrs	x0, CORTEX_A53_ECTLR_EL1
-	bic	x0, x0, #CORTEX_A53_ECTLR_CPU_RET_CTRL_MASK
-	msr	CORTEX_A53_ECTLR_EL1, x0
-	isb
-	dsb	sy
-	ret
-endfunc clr_retention_ticks
-
 	/* -----------------------------------------------------
 	 * void clrex(void);
 	 * -----------------------------------------------------

plat/hisilicon/hikey960/hikey960_pm.c

@@ -26,38 +26,6 @@
 #define SYSTEM_PWR_STATE(state) \
 	((state)->pwr_domain_state[PLAT_MAX_PWR_LVL])
 
-#define PSTATE_WIDTH		4
-#define PSTATE_MASK		((1 << PSTATE_WIDTH) - 1)
-
-#define MAKE_PWRSTATE(lvl2_state, lvl1_state, lvl0_state, pwr_lvl, type) \
-		(((lvl2_state) << (PSTATE_ID_SHIFT + PSTATE_WIDTH * 2)) | \
-		 ((lvl1_state) << (PSTATE_ID_SHIFT + PSTATE_WIDTH)) | \
-		 ((lvl0_state) << (PSTATE_ID_SHIFT)) | \
-		 ((pwr_lvl) << PSTATE_PWR_LVL_SHIFT) | \
-		 ((type) << PSTATE_TYPE_SHIFT))
-
-/*
- * The table storing the valid idle power states. Ensure that the
- * array entries are populated in ascending order of state-id to
- * enable us to use binary search during power state validation.
- * The table must be terminated by a NULL entry.
- */
-const unsigned int hikey960_pwr_idle_states[] = {
-	/* State-id - 0x001 */
-	MAKE_PWRSTATE(PLAT_MAX_RUN_STATE, PLAT_MAX_RUN_STATE,
-		      PLAT_MAX_STB_STATE, MPIDR_AFFLVL0, PSTATE_TYPE_STANDBY),
-	/* State-id - 0x002 */
-	MAKE_PWRSTATE(PLAT_MAX_RUN_STATE, PLAT_MAX_RUN_STATE,
-		      PLAT_MAX_RET_STATE, MPIDR_AFFLVL0, PSTATE_TYPE_STANDBY),
-	/* State-id - 0x003 */
-	MAKE_PWRSTATE(PLAT_MAX_RUN_STATE, PLAT_MAX_RUN_STATE,
-		      PLAT_MAX_OFF_STATE, MPIDR_AFFLVL0, PSTATE_TYPE_POWERDOWN),
-	/* State-id - 0x033 */
-	MAKE_PWRSTATE(PLAT_MAX_RUN_STATE, PLAT_MAX_OFF_STATE,
-		      PLAT_MAX_OFF_STATE, MPIDR_AFFLVL1, PSTATE_TYPE_POWERDOWN),
-	0,
-};
-
 #define DMAC_GLB_REG_SEC	0x694
 #define AXI_CONF_BASE		0x820
 
@@ -66,24 +34,17 @@ static uintptr_t hikey960_sec_entrypoint;
 static void hikey960_pwr_domain_standby(plat_local_state_t cpu_state)
 {
 	unsigned long scr;
-	unsigned int val = 0;
-
-	assert(cpu_state == PLAT_MAX_STB_STATE ||
-	       cpu_state == PLAT_MAX_RET_STATE);
 
 	scr = read_scr_el3();
 
-	/* Enable Physical IRQ and FIQ to wake the CPU*/
+	/* Enable Physical IRQ and FIQ to wake the CPU */
 	write_scr_el3(scr | SCR_IRQ_BIT | SCR_FIQ_BIT);
 
-	if (cpu_state == PLAT_MAX_RET_STATE)
-		set_retention_ticks(val);
-
+	/* Add barrier before CPU enter WFI state */
+	isb();
+	dsb();
 	wfi();
 
-	if (cpu_state == PLAT_MAX_RET_STATE)
-		clr_retention_ticks(val);
-
 	/*
 	 * Restore SCR to the original value, synchronisazion of
 	 * scr_el3 is done by eret while el3_exit to save some
@@ -161,34 +122,38 @@ static void __dead2 hikey960_system_reset(void)
 int hikey960_validate_power_state(unsigned int power_state,
 			       psci_power_state_t *req_state)
 {
-	unsigned int state_id;
+	unsigned int pstate = psci_get_pstate_type(power_state);
+	unsigned int pwr_lvl = psci_get_pstate_pwrlvl(power_state);
 	int i;
 
 	assert(req_state);
 
+	if (pwr_lvl > PLAT_MAX_PWR_LVL)
+		return PSCI_E_INVALID_PARAMS;
+
+	/* Sanity check the requested state */
+	if (pstate == PSTATE_TYPE_STANDBY) {
 		/*
-	 *  Currently we are using a linear search for finding the matching
-	 *  entry in the idle power state array. This can be made a binary
-	 *  search if the number of entries justify the additional complexity.
+		 * It's possible to enter standby only on power level 0
+		 * Ignore any other power level.
 		 */
-	for (i = 0; !!hikey960_pwr_idle_states[i]; i++) {
-		if (power_state == hikey960_pwr_idle_states[i])
-			break;
-	}
-
-	/* Return error if entry not found in the idle state array */
-	if (!hikey960_pwr_idle_states[i])
+		if (pwr_lvl != MPIDR_AFFLVL0)
 			return PSCI_E_INVALID_PARAMS;
 
-	i = 0;
-	state_id = psci_get_pstate_id(power_state);
-
-	/* Parse the State ID and populate the state info parameter */
-	while (state_id) {
-		req_state->pwr_domain_state[i++] = state_id & PSTATE_MASK;
-		state_id >>= PSTATE_WIDTH;
+		req_state->pwr_domain_state[MPIDR_AFFLVL0] =
+					PLAT_MAX_RET_STATE;
+	} else {
+		for (i = MPIDR_AFFLVL0; i <= pwr_lvl; i++)
+			req_state->pwr_domain_state[i] =
+					PLAT_MAX_OFF_STATE;
 	}
 
+	/*
+	 * We expect the 'state id' to be zero.
+	 */
+	if (psci_get_pstate_id(power_state))
+		return PSCI_E_INVALID_PARAMS;
+
 	return PSCI_E_SUCCESS;
 }
 

plat/hisilicon/hikey960/include/platform_def.h

@@ -31,10 +31,8 @@
 #define PLAT_NUM_PWR_DOMAINS		(PLATFORM_CORE_COUNT + \
 					 PLATFORM_CLUSTER_COUNT + 1)
 
-#define PLAT_MAX_RUN_STATE		0
-#define PLAT_MAX_STB_STATE		1
-#define PLAT_MAX_RET_STATE		2
-#define PLAT_MAX_OFF_STATE		3
+#define PLAT_MAX_RET_STATE		1
+#define PLAT_MAX_OFF_STATE		2
 
 #define MAX_IO_DEVICES			3
 #define MAX_IO_HANDLES			4