drivers: renesas: rcar: eMMC driver code clean up

Fix checkpatch warnings and MISRA defects.

There are no functional changes.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: I349a8eaa7bd6182746ba5104ee9fe48a709c24fd

drivers/renesas/rcar/emmc/emmc_cmd.c

 /*
- * Copyright (c) 2015-2017, Renesas Electronics Corporation. All rights reserved.
+ * Copyright (c) 2015-2020, Renesas Electronics Corporation. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -7,10 +7,10 @@
 #include <common/debug.h>
 
 #include "emmc_config.h"
+#include "emmc_def.h"
 #include "emmc_hal.h"
-#include "emmc_std.h"
 #include "emmc_registers.h"
-#include "emmc_def.h"
+#include "emmc_std.h"
 #include "micro_delay.h"
 
 static void emmc_little_to_big(uint8_t *p, uint32_t value)
@@ -22,6 +22,7 @@ static void emmc_little_to_big(uint8_t *p, uint32_t value)
 	p[1] = (uint8_t) (value >> 16);
 	p[2] = (uint8_t) (value >> 8);
 	p[3] = (uint8_t) value;
+
 }
 
 static void emmc_softreset(void)
@@ -64,7 +65,6 @@ reset:
 	SETR_32(SD_INFO2, SD_INFO2_CLEAR);
 	SETR_32(SD_INFO1_MASK, 0x00000000U);	/* all interrupt disable */
 	SETR_32(SD_INFO2_MASK, SD_INFO2_CLEAR);	/* all interrupt disable */
-
 }
 
 static void emmc_read_response(uint32_t *response)
@@ -96,8 +96,7 @@ static EMMC_ERROR_CODE emmc_response_check(uint32_t *response,
 {
 
 	HAL_MEMCARD_RESPONSE_TYPE response_type =
-	    (HAL_MEMCARD_RESPONSE_TYPE) (mmc_drv_obj.cmd_info.
-					 cmd & HAL_MEMCARD_RESPONSE_TYPE_MASK);
+	    ((HAL_MEMCARD_RESPONSE_TYPE)mmc_drv_obj.cmd_info.cmd & HAL_MEMCARD_RESPONSE_TYPE_MASK);
 
 	if (response == NULL)
 		return EMMC_ERR_PARAM;
@@ -117,7 +116,7 @@ static EMMC_ERROR_CODE emmc_response_check(uint32_t *response,
 			}
 			return EMMC_ERR_CARD_STATUS_BIT;
 		}
-		return EMMC_SUCCESS;;
+		return EMMC_SUCCESS;
 	}
 
 	if (response_type == HAL_MEMCARD_RESPONSE_R4) {
@@ -223,11 +222,11 @@ EMMC_ERROR_CODE emmc_exec_cmd(uint32_t error_mask, uint32_t *response)
 
 	state = ESTATE_BEGIN;
 	response_type =
-	    (HAL_MEMCARD_RESPONSE_TYPE) (mmc_drv_obj.cmd_info.
-					 cmd & HAL_MEMCARD_RESPONSE_TYPE_MASK);
+	    ((HAL_MEMCARD_RESPONSE_TYPE)mmc_drv_obj.cmd_info.cmd &
+					HAL_MEMCARD_RESPONSE_TYPE_MASK);
 	cmd_type =
-	    (HAL_MEMCARD_COMMAND_TYPE) (mmc_drv_obj.cmd_info.
-					cmd & HAL_MEMCARD_COMMAND_TYPE_MASK);
+	    ((HAL_MEMCARD_COMMAND_TYPE) mmc_drv_obj.cmd_info.cmd &
+					HAL_MEMCARD_COMMAND_TYPE_MASK);
 
 	/* state machine */
 	while ((mmc_drv_obj.force_terminate != TRUE) && (state != ESTATE_END)) {
@@ -427,8 +426,9 @@ EMMC_ERROR_CODE emmc_exec_cmd(uint32_t error_mask, uint32_t *response)
 		case ESTATE_ACCESS_END:
 
 			/* clear flag */
-			if (HAL_MEMCARD_DMA == mmc_drv_obj.transfer_mode) {
-				SETR_32(CC_EXT_MODE, CC_EXT_MODE_CLEAR);	/* W (CC_EXT_MODE, H'0000_1010) SD_BUF DMA transfer disabled */
+			if (mmc_drv_obj.transfer_mode == HAL_MEMCARD_DMA) {
+				/* W (CC_EXT_MODE, H'0000_1010) SD_BUF DMA transfer disabled */
+				SETR_32(CC_EXT_MODE, CC_EXT_MODE_CLEAR);
 				SETR_32(SD_STOP, 0x00000000U);
 				mmc_drv_obj.during_dma_transfer = FALSE;
 			}
@@ -448,8 +448,9 @@ EMMC_ERROR_CODE emmc_exec_cmd(uint32_t error_mask, uint32_t *response)
 
 		case ESTATE_TRANSFER_ERROR:
 			/* The error occurred in the Data transfer.  */
-			if (HAL_MEMCARD_DMA == mmc_drv_obj.transfer_mode) {
-				SETR_32(CC_EXT_MODE, CC_EXT_MODE_CLEAR);	/* W (CC_EXT_MODE, H'0000_1010) SD_BUF DMA transfer disabled */
+			if (mmc_drv_obj.transfer_mode == HAL_MEMCARD_DMA) {
+				/* W (CC_EXT_MODE, H'0000_1010) SD_BUF DMA transfer disabled */
+				SETR_32(CC_EXT_MODE, CC_EXT_MODE_CLEAR);
 				SETR_32(SD_STOP, 0x00000000U);
 				mmc_drv_obj.during_dma_transfer = FALSE;
 			}

drivers/renesas/rcar/emmc/emmc_config.h

 /*
- * Copyright (c) 2015-2017, Renesas Electronics Corporation. All rights reserved.
+ * Copyright (c) 2015-2020, Renesas Electronics Corporation. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
 
-/**
- * @file  emmc_config.h
- * @brief Configuration file
- *
- */
-
 #ifndef EMMC_CONFIG_H
 #define EMMC_CONFIG_H
 
-/* ************************ HEADER (INCLUDE) SECTION *********************** */
-
-/* ***************** MACROS, CONSTANTS, COMPILATION FLAGS ****************** */
-
-/** @brief MMC driver config
- */
-#define EMMC_RCA                1UL	/* RCA  */
-#define EMMC_RW_DATA_TIMEOUT    0x40UL	/* 314ms (freq = 400KHz, timeout Counter = 0x04(SDCLK * 2^17)  */
-#define EMMC_RETRY_COUNT        0	/* how many times to try after fail. Don't change. */
+/* RCA */
+#define EMMC_RCA		1UL
+/* 314ms (freq = 400KHz, timeout Counter = 0x04(SDCLK * 2^17)  */
+#define EMMC_RW_DATA_TIMEOUT	0x40UL
+/* how many times to try after fail. Don't change. */
+#define EMMC_RETRY_COUNT	0
 #define EMMC_CMD_MAX		60UL	/* Don't change. */
 
-/** @brief etc
- */
 #define LOADIMAGE_FLAGS_DMA_ENABLE	0x00000001UL
 
-/* ********************** STRUCTURES, TYPE DEFINITIONS ********************* */
-
-/* ********************** DECLARATION OF EXTERNAL DATA ********************* */
-
-/* ************************** FUNCTION PROTOTYPES ************************** */
-
-/* ********************************* CODE ********************************** */
-
 #endif /* EMMC_CONFIG_H */
-/* ******************************** END ************************************ */

drivers/renesas/rcar/emmc/emmc_init.c

 /*
- * Copyright (c) 2015-2018, Renesas Electronics Corporation. All rights reserved.
+ * Copyright (c) 2015-2020, Renesas Electronics Corporation. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -32,12 +32,12 @@ EMMC_ERROR_CODE rcar_emmc_memcard_power(uint8_t mode)
 
 	return EMMC_SUCCESS;
 }
-static __inline void emmc_set_retry_count(uint32_t retry)
+static inline void emmc_set_retry_count(uint32_t retry)
 {
 	mmc_drv_obj.retries_after_fail = retry;
 }
 
-static __inline void emmc_set_data_timeout(uint32_t data_timeout)
+static inline void emmc_set_data_timeout(uint32_t data_timeout)
 {
 	mmc_drv_obj.data_timeout = data_timeout;
 }
@@ -73,7 +73,8 @@ static EMMC_ERROR_CODE emmc_dev_finalize(void)
 	EMMC_ERROR_CODE result;
 	uint32_t dataL;
 
-	/* MMC power off
+	/*
+	 * MMC power off
 	 * the power supply of eMMC device is always turning on.
 	 * RST_n : Hi --> Low level.
 	 */
@@ -115,27 +116,25 @@ static EMMC_ERROR_CODE emmc_dev_init(void)
 
 	SETR_32(HOST_MODE, 0x00000000U);	/* SD_BUF access width = 64-bit */
 	SETR_32(SD_OPTION, 0x0000C0EEU);	/* Bus width = 1bit, timeout=MAX */
-	SETR_32(SD_CLK_CTRL, 0x00000000U);	/* Automatic Control=Disable, Clock Output=Disable */
+	SETR_32(SD_CLK_CTRL, 0x00000000U);	/* Disable Automatic Control & Clock Output */
 
 	return EMMC_SUCCESS;
 }
 
 static EMMC_ERROR_CODE emmc_reset_controller(void)
 {
-	EMMC_ERROR_CODE retult;
+	EMMC_ERROR_CODE result;
 
 	/* initialize mmc driver */
 	emmc_drv_init();
 
 	/* initialize H/W */
-	retult = emmc_dev_init();
-	if (EMMC_SUCCESS != retult) {
-		return retult;
-	}
-
+	result = emmc_dev_init();
+	if (result == EMMC_SUCCESS) {
 		mmc_drv_obj.initialize = TRUE;
+	}
 
-	return retult;
+	return result;
 
 }
 
@@ -152,14 +151,12 @@ EMMC_ERROR_CODE emmc_terminate(void)
 
 EMMC_ERROR_CODE rcar_emmc_init(void)
 {
-	EMMC_ERROR_CODE retult;
-
-	retult = emmc_reset_controller();
-	if (EMMC_SUCCESS != retult) {
-		return retult;
-	}
+	EMMC_ERROR_CODE result;
 
+	result = emmc_reset_controller();
+	if (result == EMMC_SUCCESS) {
 		emmc_driver_config();
+	}
 
-	return EMMC_SUCCESS;
+	return result;
 }

drivers/renesas/rcar/emmc/emmc_interrupt.c

 /*
- * Copyright (c) 2015-2019, Renesas Electronics Corporation. All rights
+ * Copyright (c) 2015-2020, Renesas Electronics Corporation. All rights
  * reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
@@ -118,7 +118,7 @@ uint32_t emmc_interrupt(void)
 		SETR_32(DM_CM_INFO2, 0x00000000U);
 		/* interrupt clear */
 		SETR_32(SD_INFO2, (GETR_32(SD_INFO2) & ~SD_INFO2_BWE));
-		/* DM_CM_INFO2:  DMA-ch0 error occured */
+		/* DM_CM_INFO2:  DMA-ch0 error occurred */
 		if ((BIT16 & mmc_drv_obj.dm_event2) != 0) {
 			mmc_drv_obj.dma_error_flag = TRUE;
 		} else {
@@ -128,13 +128,13 @@ uint32_t emmc_interrupt(void)
 		/* wait next interrupt */
 		mmc_drv_obj.state_machine_blocking = FALSE;
 	}
-	/* DM_CM_INFO1: DMA-ch1 transfer complete or error occured */
+	/* DM_CM_INFO1: DMA-ch1 transfer complete or error occurred */
 	else if ((end_bit & mmc_drv_obj.dm_event1) != 0U) {
 		SETR_32(DM_CM_INFO1, 0x00000000U);
 		SETR_32(DM_CM_INFO2, 0x00000000U);
 		/* interrupt clear */
 		SETR_32(SD_INFO2, (GETR_32(SD_INFO2) & ~SD_INFO2_BRE));
-		/* DM_CM_INFO2: DMA-ch1 error occured */
+		/* DM_CM_INFO2: DMA-ch1 error occurred */
 		if ((BIT17 & mmc_drv_obj.dm_event2) != 0) {
 			mmc_drv_obj.dma_error_flag = TRUE;
 		} else {

drivers/renesas/rcar/emmc/emmc_mount.c

 /*
- * Copyright (c) 2015-2019, Renesas Electronics Corporation. All rights reserved.
+ * Copyright (c) 2015-2020, Renesas Electronics Corporation. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -8,10 +8,10 @@
 #include <lib/mmio.h>
 
 #include "emmc_config.h"
+#include "emmc_def.h"
 #include "emmc_hal.h"
-#include "emmc_std.h"
 #include "emmc_registers.h"
-#include "emmc_def.h"
+#include "emmc_std.h"
 #include "micro_delay.h"
 #include "rcar_def.h"
 
@@ -53,7 +53,7 @@ static EMMC_ERROR_CODE emmc_card_init(void)
 	int32_t retry;
 	uint32_t freq = MMC_400KHZ;	/* 390KHz */
 	EMMC_ERROR_CODE result;
-	uint32_t resultCalc;
+	uint32_t result_calc;
 
 	/* state check */
 	if ((mmc_drv_obj.initialize != TRUE)
@@ -161,9 +161,12 @@ static EMMC_ERROR_CODE emmc_card_init(void)
 
 	mmc_drv_obj.selected = TRUE;
 
-	/* card speed check */
-	resultCalc = emmc_calc_tran_speed(&freq);	/* Card spec is calculated from TRAN_SPEED(CSD).  */
-	if (resultCalc == 0) {
+	/*
+	 * card speed check
+	 * Card spec is calculated from TRAN_SPEED(CSD)
+	 */
+	result_calc = emmc_calc_tran_speed(&freq);
+	if (result_calc == 0) {
 		emmc_write_error_info(EMMC_FUNCNO_CARD_INIT,
 				      EMMC_ERR_ILLEGAL_CARD);
 		return EMMC_ERR_ILLEGAL_CARD;
@@ -201,7 +204,8 @@ static EMMC_ERROR_CODE emmc_card_init(void)
 			    HAL_MEMCARD_NOT_DMA);
 	result = emmc_exec_cmd(EMMC_R1_ERROR_MASK, mmc_drv_obj.response);
 	if (result != EMMC_SUCCESS) {
-		/* CMD12 is not send.
+		/*
+		 * CMD12 is not send.
 		 * If BUS initialization is failed, user must be execute Bus initialization again.
 		 * Bus initialization is start CMD0(soft reset command).
 		 */
@@ -217,7 +221,7 @@ static EMMC_ERROR_CODE emmc_card_init(void)
 
 static EMMC_ERROR_CODE emmc_high_speed(void)
 {
-	uint32_t freq;	      /**< High speed mode clock frequency */
+	uint32_t freq;	      /* High speed mode clock frequency */
 	EMMC_ERROR_CODE result;
 	uint8_t cardType;
 
@@ -236,8 +240,8 @@ static EMMC_ERROR_CODE emmc_high_speed(void)
 	else
 		freq = MMC_20MHZ;
 
-	/* Hi-Speed-mode selction */
-	if ((MMC_52MHZ == freq) || (MMC_26MHZ == freq)) {
+	/* Hi-Speed-mode selection */
+	if ((freq == MMC_52MHZ) || (freq == MMC_26MHZ)) {
 		/* CMD6 */
 		emmc_make_nontrans_cmd(CMD6_SWITCH, EMMC_SWITCH_HS_TIMING);
 		result =
@@ -322,7 +326,8 @@ static EMMC_ERROR_CODE emmc_bus_width(uint32_t width)
 		return EMMC_ERR_STATE;
 	}
 
-	mmc_drv_obj.bus_width = (HAL_MEMCARD_DATA_WIDTH) (width >> 2);	/* 2 = 8bit, 1 = 4bit, 0 =1bit */
+	/* 2 = 8bit, 1 = 4bit, 0 =1bit */
+	mmc_drv_obj.bus_width = (HAL_MEMCARD_DATA_WIDTH) (width >> 2);
 
 	/* CMD6 */
 	emmc_make_nontrans_cmd(CMD6_SWITCH,
@@ -371,7 +376,6 @@ static EMMC_ERROR_CODE emmc_bus_width(uint32_t width)
 	return EMMC_SUCCESS;
 
 EXIT:
-
 	emmc_write_error_info(EMMC_FUNCNO_BUS_WIDTH, result);
 	ERROR("BL2: emmc bus_width error end\n");
 	return result;
@@ -489,82 +493,83 @@ static void emmc_get_partition_access(void)
 
 static uint32_t emmc_calc_tran_speed(uint32_t *freq)
 {
-	const uint32_t unit[8] = { 10000, 100000, 1000000, 10000000,
-				0, 0, 0, 0 };   /**< frequency unit (1/10) */
-	const uint32_t mult[16] = { 0, 10, 12, 13, 15, 20, 26, 30, 35, 40, 45,
-				52, 55, 60, 70, 80 };
-
-	uint32_t maxFreq;
-	uint32_t result;
+	const uint32_t unit[8] = { 10000U, 100000U, 1000000U, 10000000U,
+				   0U, 0U, 0U, 0U }; /* frequency unit (1/10) */
+	const uint32_t mult[16] = { 0U, 10U, 12U, 13U, 15U, 20U, 26U, 30U, 35U,
+				    40U, 45U, 52U, 55U, 60U, 70U, 80U };
 	uint32_t tran_speed = EMMC_CSD_TRAN_SPEED();
+	uint32_t max_freq;
+	uint32_t result;
 
-	/* tran_speed = 0x32
+	/*
+	 * tran_speed = 0x32
 	 * unit[tran_speed&0x7] = uint[0x2] = 1000000
 	 * mult[(tran_speed&0x78)>>3] = mult[0x30>>3] = mult[6] = 26
 	 * 1000000 * 26 = 26000000 (26MHz)
 	 */
 
 	result = 1;
-	maxFreq =
+	max_freq =
 	    unit[tran_speed & EMMC_TRANSPEED_FREQ_UNIT_MASK] *
 	    mult[(tran_speed & EMMC_TRANSPEED_MULT_MASK) >>
 		 EMMC_TRANSPEED_MULT_SHIFT];
 
-	if (maxFreq == 0) {
+	if (max_freq == 0) {
 		result = 0;
-	} else if (MMC_FREQ_52MHZ <= maxFreq)
+	} else if (max_freq >= MMC_FREQ_52MHZ) {
 		*freq = MMC_52MHZ;
-	else if (MMC_FREQ_26MHZ <= maxFreq)
+	} else if (max_freq >= MMC_FREQ_26MHZ) {
 		*freq = MMC_26MHZ;
-	else if (MMC_FREQ_20MHZ <= maxFreq)
+	} else if (max_freq >= MMC_FREQ_20MHZ) {
 		*freq = MMC_20MHZ;
-	else
+	} else {
 		*freq = MMC_400KHZ;
+	}
 
 	return result;
 }
 
 static uint32_t emmc_set_timeout_register_value(uint32_t freq)
 {
-	uint32_t timeoutCnt;	/* SD_OPTION   - Timeout Counter  */
+	uint32_t timeout_cnt;	/* SD_OPTION   - Timeout Counter  */
 
 	switch (freq) {
 	case 1U:
-		timeoutCnt = 0xE0U;
+		timeout_cnt = 0xE0U;
 		break;		/* SDCLK * 2^27 */
 	case 2U:
-		timeoutCnt = 0xE0U;
+		timeout_cnt = 0xE0U;
 		break;		/* SDCLK * 2^27 */
 	case 4U:
-		timeoutCnt = 0xD0U;
+		timeout_cnt = 0xD0U;
 		break;		/* SDCLK * 2^26 */
 	case 8U:
-		timeoutCnt = 0xC0U;
+		timeout_cnt = 0xC0U;
 		break;		/* SDCLK * 2^25 */
 	case 16U:
-		timeoutCnt = 0xB0U;
+		timeout_cnt = 0xB0U;
 		break;		/* SDCLK * 2^24 */
 	case 32U:
-		timeoutCnt = 0xA0U;
+		timeout_cnt = 0xA0U;
 		break;		/* SDCLK * 2^23 */
 	case 64U:
-		timeoutCnt = 0x90U;
+		timeout_cnt = 0x90U;
 		break;		/* SDCLK * 2^22 */
 	case 128U:
-		timeoutCnt = 0x80U;
+		timeout_cnt = 0x80U;
 		break;		/* SDCLK * 2^21 */
 	case 256U:
-		timeoutCnt = 0x70U;
+		timeout_cnt = 0x70U;
 		break;		/* SDCLK * 2^20 */
 	case 512U:
-		timeoutCnt = 0x70U;
+		timeout_cnt = 0x70U;
 		break;		/* SDCLK * 2^20 */
 	default:
-		timeoutCnt = 0xE0U;
+		timeout_cnt = 0xE0U;
 		break;		/* SDCLK * 2^27 */
 	}
 
-	return timeoutCnt;
+	return timeout_cnt;
 }
 
 EMMC_ERROR_CODE emmc_set_ext_csd(uint32_t arg)

drivers/renesas/rcar/emmc/emmc_read.c

 /*
- * Copyright (c) 2015-2017, Renesas Electronics Corporation. All rights reserved.
+ * Copyright (c) 2015-2020, Renesas Electronics Corporation. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -7,15 +7,15 @@
 #include <arch_helpers.h>
 
 #include "emmc_config.h"
+#include "emmc_def.h"
 #include "emmc_hal.h"
-#include "emmc_std.h"
 #include "emmc_registers.h"
-#include "emmc_def.h"
+#include "emmc_std.h"
 
 #define MIN_EMMC(a, b)	(((a) < (b)) ? (a) : (b))
 #define EMMC_RW_SECTOR_COUNT_MAX	0x0000ffffU
 
-static EMMC_ERROR_CODE emmc_multiple_block_read (uint32_t *buff_address_virtual,
+static EMMC_ERROR_CODE emmc_multiple_block_read(uint32_t *buff_address_virtual,
 		uint32_t sector_number, uint32_t count,
 		HAL_MEMCARD_DATA_TRANSFER_MODE transfer_mode)
 {
@@ -39,7 +39,8 @@ static EMMC_ERROR_CODE emmc_multiple_block_read (uint32_t *buff_address_virtual,
 	}
 	SETR_32(SD_SECCNT, count);
 	SETR_32(SD_STOP, 0x00000100);
-	SETR_32(CC_EXT_MODE, (CC_EXT_MODE_CLEAR | CC_EXT_MODE_DMASDRW_ENABLE));	/* SD_BUF Read/Write DMA Transfer enable */
+	/* SD_BUF Read/Write DMA Transfer enable */
+	SETR_32(CC_EXT_MODE, (CC_EXT_MODE_CLEAR | CC_EXT_MODE_DMASDRW_ENABLE));
 
 	/* CMD18 */
 	emmc_make_trans_cmd(CMD18_READ_MULTIPLE_BLOCK, sector_number,

drivers/renesas/rcar/emmc/emmc_registers.h

 /*
- * Copyright (c) 2015-2018, Renesas Electronics Corporation. All rights reserved.
+ * Copyright (c) 2015-2020, Renesas Electronics Corporation. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
 
-/**
- * @file  emmc_registers.h
- * @brief emmc boot driver is expecting this header file. HS-MMC module header file.
- *
- */
-
 #ifndef EMMC_REGISTERS_H
 #define EMMC_REGISTERS_H
 
-/* ************************ HEADER (INCLUDE) SECTION *********************** */
-
-/* ***************** MACROS, CONSTANTS, COMPILATION FLAGS ****************** */
-
 /* MMC channel select */
 #define MMC_CH0		(0U)	/* SDHI2/MMC0 */
 #define MMC_CH1		(1U)	/* SDHI3/MMC1 */
@@ -60,18 +50,18 @@
 #define BIT30	(0x40000000U)
 #define BIT31	(0x80000000U)
 
-/** @brief Clock Pulse Generator (CPG) registers
- */
+/* Clock Pulse Generator (CPG) registers */
 #define CPG_BASE	(0xE6150000U)
-
-#define	CPG_MSTPSR3		(CPG_BASE+0x0048U)	/* Module stop status register 3 */
-
-#define	CPG_SMSTPCR3		(CPG_BASE+0x013CU)	/* System module stop control register 3 */
-
-#define	CPG_SD2CKCR		(CPG_BASE+0x0268U)	/* SDHI2 clock frequency control register */
-#define CPG_SD3CKCR		(CPG_BASE+0x026CU)	/* SDHI3 clock frequency control register */
-
-#define	CPG_CPGWPR		(CPG_BASE+0x0900U)	/* CPG Write Protect Register */
+/* Module stop status register 3 */
+#define CPG_MSTPSR3	(CPG_BASE + 0x0048U)
+/* System module stop control register 3 */
+#define CPG_SMSTPCR3	(CPG_BASE + 0x013CU)
+/* SDHI2 clock frequency control register */
+#define CPG_SD2CKCR	(CPG_BASE + 0x0268U)
+/* SDHI3 clock frequency control register */
+#define CPG_SD3CKCR	(CPG_BASE + 0x026CU)
+/* CPG Write Protect Register */
+#define CPG_CPGWPR	(CPG_BASE + 0x0900U)
 
 #if USE_MMC_CH == MMC_CH0
 #define CPG_SDxCKCR		(CPG_SD2CKCR)	/* SDHI2/MMC0 */
@@ -79,14 +69,12 @@
 #define CPG_SDxCKCR		(CPG_SD3CKCR)	/* SDHI3/MMC1 */
 #endif /* USE_MMC_CH == MMC_CH0 */
 
-/** Boot Status register
- */
+/* Boot Status register */
 #define  MFISBTSTSR			(0xE6260604U)
 
 #define  MFISBTSTSR_BOOT_PARTITION	(0x00000010U)
 
-/** brief eMMC registers
- */
+/* eMMC registers */
 #define MMC0_SD_BASE		(0xEE140000U)
 #define MMC1_SD_BASE		(0xEE160000U)
 
@@ -136,8 +124,7 @@
 #define DM_CM_INFO2_MASK	(MMC_SD_BASE + 0x0858U)
 #define DM_DTRAN_ADDR		(MMC_SD_BASE + 0x0880U)
 
-/** @brief SD_INFO1 Registers
- */
+/* SD_INFO1 Registers */
 #define SD_INFO1_HPIRES		0x00010000UL /* Response Reception Completion */
 #define SD_INFO1_INFO10		0x00000400UL /* Indicates the SDDAT3 state */
 #define SD_INFO1_INFO9		0x00000200UL /* SDDAT3 Card Insertion */
@@ -149,8 +136,7 @@
 #define SD_INFO1_INFO2		0x00000004UL /* Access end */
 #define SD_INFO1_INFO0		0x00000001UL /* Response end */
 
-/** @brief SD_INFO2 Registers
- */
+/* SD_INFO2 Registers */
 #define SD_INFO2_ILA		0x00008000UL /* Illegal Access Error */
 #define SD_INFO2_CBSY		0x00004000UL /* Command Type Register Busy */
 #define SD_INFO2_SCLKDIVEN	0x00002000UL
@@ -165,14 +151,12 @@
 #define SD_INFO2_ERR1		0x00000002UL /* CRC Error */
 #define SD_INFO2_ERR0		0x00000001UL /* CMD Error */
 #define SD_INFO2_ALL_ERR	0x0000807FUL
-#define SD_INFO2_CLEAR				0x00000800UL	/* BIT11 The write value should always be 1. HWM_0003 */
+#define SD_INFO2_CLEAR		0x00000800UL /* BIT11 write value should always be 1. HWM_0003 */
 
-/** @brief SOFT_RST
- */
+/* SOFT_RST */
 #define SOFT_RST_SDRST		0x00000001UL
 
-/** @brief SD_CLK_CTRL
- */
+/* SD_CLK_CTRL */
 #define SD_CLK_CTRL_SDCLKOFFEN		0x00000200UL
 #define SD_CLK_CTRL_SCLKEN		0x00000100UL
 #define SD_CLK_CTRL_CLKDIV_MASK		0x000000FFUL
@@ -181,18 +165,18 @@
 #define SD_CLK_WRITE_MASK		0x000003FFUL
 #define SD_CLK_CLKDIV_CLEAR_MASK	0xFFFFFF0FUL
 
-/** @brief SD_OPTION
- */
+/* SD_OPTION */
 #define SD_OPTION_TIMEOUT_CNT_MASK	0x000000F0UL
 
-/** @brief MMC Clock Frequency
+/*
+ * MMC Clock Frequency
  * 200MHz * 1/x = output clock
  */
 #define MMC_CLK_OFF		0UL   /* Clock output is disabled */
 #define MMC_400KHZ		512UL /* 200MHz * 1/512 = 390 KHz */
 #define MMC_20MHZ		16UL  /* 200MHz * 1/16 = 12.5 MHz Normal speed mode */
-#define MMC_26MHZ			8UL	/* 200MHz * 1/8   = 25 MHz High speed mode 26Mhz        */
-#define MMC_52MHZ			4UL	/* 200MHz * 1/4   = 50 MHz High speed mode 52Mhz        */
+#define MMC_26MHZ		8UL   /* 200MHz * 1/8 = 25 MHz HS mode 26Mhz */
+#define MMC_52MHZ		4UL   /* 200MHz * 1/4 = 50 MHz HS mode 52Mhz */
 #define MMC_100MHZ		2UL   /* 200MHz * 1/2 = 100 MHz */
 #define MMC_200MHZ		1UL   /* 200MHz * 1/1 = 200 MHz */
 
@@ -200,8 +184,7 @@
 #define MMC_FREQ_26MHZ		26000000UL
 #define MMC_FREQ_20MHZ		20000000UL
 
-/** @brief MMC Clock DIV
- */
+/* MMC Clock DIV */
 #define MMC_SD_CLK_START	0x00000100UL	/* CLOCK On */
 #define MMC_SD_CLK_STOP		(~0x00000100UL)	/* CLOCK stop */
 #define MMC_SD_CLK_DIV1		0x000000FFUL	/* 1/1 */
@@ -215,46 +198,31 @@
 #define MMC_SD_CLK_DIV256	0x00000040UL	/* 1/256 */
 #define MMC_SD_CLK_DIV512	0x00000080UL	/* 1/512 */
 
-/** @brief DM_CM_DTRAN_MODE
- */
+/* DM_CM_DTRAN_MODE */
 #define DM_CM_DTRAN_MODE_CH0		0x00000000UL	/* CH0(downstream) */
 #define DM_CM_DTRAN_MODE_CH1		0x00010000UL	/* CH1(upstream)   */
 #define DM_CM_DTRAN_MODE_BIT_WIDTH	0x00000030UL
 
-/** @brief CC_EXT_MODE
- */
+/* CC_EXT_MODE */
 #define CC_EXT_MODE_DMASDRW_ENABLE	0x00000002UL	/* SD_BUF Read/Write DMA Transfer */
 #define CC_EXT_MODE_CLEAR		0x00001010UL	/* BIT 12 & 4 always 1. */
 
-/** @brief DM_CM_INFO_MASK
- */
+/* DM_CM_INFO_MASK */
 #define DM_CM_INFO_MASK_CLEAR		0xFFFCFFFEUL
 #define DM_CM_INFO_CH0_ENABLE		0x00010001UL
 #define DM_CM_INFO_CH1_ENABLE		0x00020001UL
 
-/** @brief DM_DTRAN_ADDR
- */
+/* DM_DTRAN_ADDR */
 #define DM_DTRAN_ADDR_WRITE_MASK	0xFFFFFFF8UL
 
-/** @brief DM_CM_DTRAN_CTRL
- */
+/* DM_CM_DTRAN_CTRL */
 #define DM_CM_DTRAN_CTRL_START		0x00000001UL
 
-/** @brief SYSC Registers
- */
+/* SYSC Registers */
 #if USE_MMC_CH == MMC_CH0
 #define CPG_MSTP_MMC		(BIT12)	/* SDHI2/MMC0 */
 #else /* USE_MMC_CH == MMC_CH0 */
 #define CPG_MSTP_MMC		(BIT11)	/* SDHI3/MMC1 */
 #endif /* USE_MMC_CH == MMC_CH0 */
 
-/* ********************** STRUCTURES, TYPE DEFINITIONS ********************* */
-
-/* ********************** DECLARATION OF EXTERNAL DATA ********************* */
-
-/* ************************** FUNCTION PROTOTYPES ************************** */
-
-/* ********************************* CODE ********************************** */
-
 #endif /* EMMC_REGISTERS_H */
-/* ******************************** END ************************************ */

drivers/renesas/rcar/emmc/emmc_utility.c

 /*
- * Copyright (c) 2015-2017, Renesas Electronics Corporation. All rights reserved.
+ * Copyright (c) 2015-2020, Renesas Electronics Corporation. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -7,10 +7,10 @@
 #include <common/debug.h>
 
 #include "emmc_config.h"
+#include "emmc_def.h"
 #include "emmc_hal.h"
-#include "emmc_std.h"
 #include "emmc_registers.h"
-#include "emmc_def.h"
+#include "emmc_std.h"
 
 static const uint32_t cmd_reg_hw[EMMC_CMD_MAX + 1] = {
 	0x00000000,		/* CMD0 */
@@ -97,8 +97,8 @@ uint32_t emmc_bit_field(uint8_t *data, uint32_t top, uint32_t bottom)
 		value =
 		    (uint32_t) ((data[index_top] << 24) |
 				(data[index_top + 1] << 16) |
-				(data[index_top + 2] << 8) | data[index_top +
-								  3]);
+				(data[index_top + 2] << 8) |
+				data[index_top + 3]);
 	}
 
 	value = ((value >> (bottom & 0x07)) & ((1 << (top - bottom + 1)) - 1));