Skip to content

GitLab

Commit bc0d8c74 authored by Manish Pandey's avatar Manish Pandey Committed by TrustedFirmware Code Review
Browse files

Merge changes I07c35829,Iec7dd019,Ic7406aa8,I4eac94f0 into integration 

* changes:
  drivers: renesas: rcar: dma: Fix coding style
  drivers: renesas: rcar: delay: Fix checkpatch warnings
  drivers: renesas: rcar: avs: Fix checkpatch warnings
  drivers: renesas: rcar: auth: Use space instead of TAB
parents f422a7bf 240c9cbf
Show whitespace changes
Inline Side-by-side
drivers/renesas/rcar/auth/auth_mod.c
View file @ bc0d8c74
/*
* Copyright (c) 2015-2019, Renesas Electronics Corporation. All rights
* Copyright (c) 2015-2020, Renesas Electronics Corporation. All rights
* reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
......@@ -7,13 +7,12 @@
#include <stddef.h>
#include <platform_def.h>
#include <arch_helpers.h>
#include <common/debug.h>
#include <lib/mmio.h>
#include <plat/common/platform.h>
#include <platform_def.h>
#include "rom_api.h"
typedef int32_t(*secure_boot_api_f) (uint32_t a, uint32_t b, void *c);
......@@ -125,9 +124,9 @@ verify_image:
#if RCAR_BL2_DCACHE == 1
/* enable */
write_sctlr_el3(read_sctlr_el3() | SCTLR_C_BIT);
#endif
#endif /* RCAR_BL2_DCACHE */
#endif
#endif /* IMAGE_BL2 */
return ret;
}
......
drivers/renesas/rcar/avs/avs_driver.c
View file @ bc0d8c74
/*
* Copyright (c) 2015-2018, Renesas Electronics Corporation. All rights reserved.
* Copyright (c) 2015-2020, Renesas Electronics Corporation. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
......@@ -8,8 +8,8 @@
#include <lib/mmio.h>
#include <lib/utils_def.h>
#include "cpg_registers.h"
#include "avs_driver.h"
#include "cpg_registers.h"
#include "rcar_def.h"
#include "rcar_private.h"
......@@ -87,9 +87,12 @@
#define ICCH_FREQ_16p66M (0x05U) /* for CP Phy 16.6666MHz */
/* PMIC */
#define PMIC_W_SLAVE_ADDRESS (0x60U) /* ROHM BD9571 slave address + (W) */
#define PMIC_R_SLAVE_ADDRESS (0x61U) /* ROHM BD9571 slave address + (R) */
#define PMIC_DVFS_SETVID (0x54U) /* ROHM BD9571 DVFS SetVID register */
/* ROHM BD9571 slave address + (W) */
#define PMIC_W_SLAVE_ADDRESS (0x60U)
/* ROHM BD9571 slave address + (R) */
#define PMIC_R_SLAVE_ADDRESS (0x61U)
/* ROHM BD9571 DVFS SetVID register */
#define PMIC_DVFS_SETVID (0x54U)
#endif /* PMIC_ROHM_BD9571 */
/* Individual information */
......@@ -102,7 +105,7 @@ typedef struct {
} initial_voltage_t;
static const initial_voltage_t init_vol_tbl[] = {
/* AVS code, RHOM BD9571 DVFS SetVID register */
/* AVS code, ROHM BD9571 DVFS SetVID register */
{0x00U, 0x53U}, /* AVS0, 0.83V */
{0x01U, 0x52U}, /* AVS1, 0.82V */
{0x02U, 0x51U}, /* AVS2, 0.81V */
......@@ -188,7 +191,7 @@ void rcar_avs_init(void)
/* Disable I2C module and All internal registers initialized. */
mmio_write_8(IIC_ICCR, 0x00U);
while ((mmio_read_8(IIC_ICCR) & ICCR_ENABLE) != 0U) {
/* Disable I2C module and All internal registers initialized. */
/* Disable I2C module and all internal registers initialized. */
mmio_write_8(IIC_ICCR, 0x00U);
}
......@@ -283,8 +286,8 @@ void rcar_avs_setting(void)
/* Dose efuse_avs exceed the number of */
/* the tables? */
if (efuse_avs >= EFUSE_AVS_NUM) {
ERROR("AVS number of eFuse is out "
"of a range. number=%u\n",
ERROR("%s%s=%u\n", "AVS number of ",
"eFuse is out of range. number",
efuse_avs);
/* Infinite loop */
panic();
......@@ -417,7 +420,8 @@ void rcar_avs_end(void)
{
uint8_t addr = PMIC_DVFS_SETVID;
uint8_t value = avs_read_pmic_reg(addr);
NOTICE("Read PMIC register. address=0x%x value=0x%x \n",
NOTICE("Read PMIC register. address=0x%x value=0x%x\n",
addr, value);
}
#endif
......@@ -446,8 +450,8 @@ static avs_error_t avs_check_error(void)
avs_error_t ret;
if ((mmio_read_8(IIC_ICSR) & ICSR_AL) == ICSR_AL) {
NOTICE("Loss of arbitration is detected. "
"AVS status=%d Retry=%u\n", avs_status, avs_retry);
NOTICE("%s AVS status=%d Retry=%u\n",
"Loss of arbitration is detected.", avs_status, avs_retry);
/* Check of retry number of times */
if (avs_retry >= AVS_RETRY_NUM) {
ERROR("AVS setting failed in retry. max=%u\n",
......@@ -458,8 +462,8 @@ static avs_error_t avs_check_error(void)
/* Set the error detected to error status. */
ret = avs_error_al;
} else if ((mmio_read_8(IIC_ICSR) & ICSR_TACK) == ICSR_TACK) {
NOTICE("Non-acknowledge is detected. "
"AVS status=%d Retry=%u\n", avs_status, avs_retry);
NOTICE("%s AVS status=%d Retry=%u\n",
"Non-acknowledge is detected.", avs_status, avs_retry);
/* Check of retry number of times */
if (avs_retry >= AVS_RETRY_NUM) {
ERROR("AVS setting failed in retry. max=%u\n",
......@@ -526,8 +530,10 @@ static uint8_t avs_read_pmic_reg(uint8_t addr)
/* Set frequency of 400kHz */
avs_set_iic_clock();
/* Set ICIC.WAITE=1, ICIC.DTEE=1 to enable data transmission */
/* interrupt and wait interrupt. */
/*
* Set ICIC.WAITE=1, ICIC.DTEE=1 to enable data transmission
* interrupt and wait interrupt.
*/
mmio_write_8(IIC_ICIC, mmio_read_8(IIC_ICIC) | ICIC_WAITE | ICIC_DTEE);
/* Write H'94 in ICCR to issue start condition */
......
drivers/renesas/rcar/delay/micro_delay.c
View file @ bc0d8c74
/*
* Copyright (c) 2018, Renesas Electronics Corporation. All rights reserved.
* Copyright (c) 2018-2020, Renesas Electronics Corporation. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <arch.h>
#include <arch_helpers.h>
#include "micro_delay.h"
#define RCAR_CONV_MICROSEC 1000000U
void
#if IMAGE_BL31
__attribute__ ((section (".system_ram")))
__attribute__ ((section(".system_ram")))
#endif
rcar_micro_delay(uint64_t micro_sec)
{
......
drivers/renesas/rcar/dma/dma_driver.c
View file @ bc0d8c74
/*
* Copyright (c) 2015-2018, Renesas Electronics Corporation. All rights reserved.
* Copyright (c) 2015-2020, Renesas Electronics Corporation. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
......@@ -11,8 +11,8 @@
#include <common/debug.h>
#include <lib/mmio.h>
#include "rcar_def.h"
#include "cpg_registers.h"
#include "rcar_def.h"
#include "rcar_private.h"
/* DMA CHANNEL setting (0/16/32) */
......@@ -129,16 +129,16 @@ void rcar_dma_exec(uintptr_t dst, uint32_t src, uint32_t len)
}
if (src & DMA_FRACTION_MASK) {
ERROR("BL2: DMA - source address invalid (0x%x), "
"length (0x%x)\n", src, dma_len);
ERROR("BL2: DMA - src address invalid (0x%x), len=(0x%x)\n",
src, dma_len);
panic();
}
if ((dst & UINT32_MAX) + dma_len > DMADAR_BOUNDARY_ADDR ||
(dst + dma_len > DMA_DST_LIMIT) ||
(dst & DMA_FRACTION_MASK)) {
ERROR("BL2: DMA - destination address invalid (0x%lx), "
"length (0x%x)\n", dst, dma_len);
ERROR("BL2: DMA - dest address invalid (0x%lx), len=(0x%x)\n",
dst, dma_len);
panic();
}
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment