Merge pull request #1767 from Yann-lms/updates_stm32mp1

Updates for STM32MP1

drivers/st/bsec/bsec.c

+/*
+ * Copyright (c) 2017-2019, STMicroelectronics - All Rights Reserved
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <limits.h>
+
+#include <libfdt.h>
+
+#include <platform_def.h>
+
+#include <arch_helpers.h>
+#include <common/debug.h>
+#include <drivers/st/bsec.h>
+#include <lib/mmio.h>
+#include <lib/spinlock.h>
+
+#define BSEC_IP_VERSION_1_0	0x10
+#define BSEC_COMPAT		"st,stm32mp15-bsec"
+
+#define OTP_ACCESS_SIZE (round_up(OTP_MAX_SIZE, __WORD_BIT) / __WORD_BIT)
+
+static uint32_t otp_nsec_access[OTP_ACCESS_SIZE] __unused;
+
+static uint32_t bsec_power_safmem(bool power);
+
+/* BSEC access protection */
+static spinlock_t bsec_spinlock;
+static uintptr_t bsec_base;
+
+static void bsec_lock(void)
+{
+	const uint32_t mask = SCTLR_M_BIT | SCTLR_C_BIT;
+
+	/* Lock is currently required only when MMU and cache are enabled */
+	if ((read_sctlr() & mask) == mask) {
+		spin_lock(&bsec_spinlock);
+	}
+}
+
+static void bsec_unlock(void)
+{
+	const uint32_t mask = SCTLR_M_BIT | SCTLR_C_BIT;
+
+	/* Unlock is required only when MMU and cache are enabled */
+	if ((read_sctlr() & mask) == mask) {
+		spin_unlock(&bsec_spinlock);
+	}
+}
+
+static int bsec_get_dt_node(struct dt_node_info *info)
+{
+	int node;
+
+	node = dt_get_node(info, -1, BSEC_COMPAT);
+	if (node < 0) {
+		return -FDT_ERR_NOTFOUND;
+	}
+
+	return node;
+}
+
+#if defined(IMAGE_BL32)
+static void enable_non_secure_access(uint32_t otp)
+{
+	otp_nsec_access[otp / __WORD_BIT] |= BIT(otp % __WORD_BIT);
+
+	if (bsec_shadow_register(otp) != BSEC_OK) {
+		panic();
+	}
+}
+
+static bool non_secure_can_access(uint32_t otp)
+{
+	return (otp_nsec_access[otp / __WORD_BIT] &
+		BIT(otp % __WORD_BIT)) != 0;
+}
+
+static int bsec_dt_otp_nsec_access(void *fdt, int bsec_node)
+{
+	int bsec_subnode;
+
+	fdt_for_each_subnode(bsec_subnode, fdt, bsec_node) {
+		const fdt32_t *cuint;
+		uint32_t reg;
+		uint32_t i;
+		uint32_t size;
+		uint8_t status;
+
+		cuint = fdt_getprop(fdt, bsec_subnode, "reg", NULL);
+		if (cuint == NULL) {
+			panic();
+		}
+
+		reg = fdt32_to_cpu(*cuint) / sizeof(uint32_t);
+		if (reg < STM32MP1_UPPER_OTP_START) {
+			continue;
+		}
+
+		status = fdt_get_status(bsec_subnode);
+		if ((status & DT_NON_SECURE) == 0U)  {
+			continue;
+		}
+
+		size = fdt32_to_cpu(*(cuint + 1)) / sizeof(uint32_t);
+
+		if ((fdt32_to_cpu(*(cuint + 1)) % sizeof(uint32_t)) != 0) {
+			size++;
+		}
+
+		for (i = reg; i < (reg + size); i++) {
+			enable_non_secure_access(i);
+		}
+	}
+
+	return 0;
+}
+#endif
+
+static uint32_t otp_bank_offset(uint32_t otp)
+{
+	assert(otp <= STM32MP1_OTP_MAX_ID);
+
+	return ((otp & ~BSEC_OTP_MASK) >> BSEC_OTP_BANK_SHIFT) *
+	       sizeof(uint32_t);
+}
+
+static uint32_t bsec_check_error(uint32_t otp)
+{
+	uint32_t bit = BIT(otp & BSEC_OTP_MASK);
+	uint32_t bank = otp_bank_offset(otp);
+
+	if ((mmio_read_32(bsec_base + BSEC_DISTURBED_OFF + bank) & bit) != 0U) {
+		return BSEC_DISTURBED;
+	}
+
+	if ((mmio_read_32(bsec_base + BSEC_ERROR_OFF + bank) & bit) != 0U) {
+		return BSEC_ERROR;
+	}
+
+	return BSEC_OK;
+}
+
+/*
+ * bsec_probe: initialize BSEC driver.
+ * return value: BSEC_OK if no error.
+ */
+uint32_t bsec_probe(void)
+{
+	void *fdt;
+	int node;
+	struct dt_node_info bsec_info;
+
+	if (fdt_get_address(&fdt) == 0) {
+		panic();
+	}
+
+	node = bsec_get_dt_node(&bsec_info);
+	if (node < 0) {
+		panic();
+	}
+
+	bsec_base = bsec_info.base;
+
+#if defined(IMAGE_BL32)
+	bsec_dt_otp_nsec_access(fdt, node);
+#endif
+	return BSEC_OK;
+}
+
+/*
+ * bsec_get_base: return BSEC base address.
+ */
+uint32_t bsec_get_base(void)
+{
+	return bsec_base;
+}
+
+/*
+ * bsec_set_config: enable and configure BSEC.
+ * cfg: pointer to param structure used to set register.
+ * return value: BSEC_OK if no error.
+ */
+uint32_t bsec_set_config(struct bsec_config *cfg)
+{
+	uint32_t value;
+	int32_t result;
+
+	value = ((((uint32_t)cfg->freq << BSEC_CONF_FRQ_SHIFT) &
+						BSEC_CONF_FRQ_MASK) |
+		 (((uint32_t)cfg->pulse_width << BSEC_CONF_PRG_WIDTH_SHIFT) &
+						BSEC_CONF_PRG_WIDTH_MASK) |
+		 (((uint32_t)cfg->tread << BSEC_CONF_TREAD_SHIFT) &
+						BSEC_CONF_TREAD_MASK));
+
+	bsec_lock();
+
+	mmio_write_32(bsec_base + BSEC_OTP_CONF_OFF, value);
+
+	bsec_unlock();
+
+	result = bsec_power_safmem((bool)cfg->power &
+				   BSEC_CONF_POWER_UP_MASK);
+	if (result != BSEC_OK) {
+		return result;
+	}
+
+	value = ((((uint32_t)cfg->upper_otp_lock << UPPER_OTP_LOCK_SHIFT) &
+						UPPER_OTP_LOCK_MASK) |
+		 (((uint32_t)cfg->den_lock << DENREG_LOCK_SHIFT) &
+						DENREG_LOCK_MASK) |
+		 (((uint32_t)cfg->prog_lock << GPLOCK_LOCK_SHIFT) &
+						GPLOCK_LOCK_MASK));
+
+	bsec_lock();
+
+	mmio_write_32(bsec_base + BSEC_OTP_LOCK_OFF, value);
+
+	bsec_unlock();
+
+	return BSEC_OK;
+}
+
+/*
+ * bsec_get_config: return config parameters set in BSEC registers.
+ * cfg: config param return.
+ * return value: BSEC_OK if no error.
+ */
+uint32_t bsec_get_config(struct bsec_config *cfg)
+{
+	uint32_t value;
+
+	if (cfg == NULL) {
+		return BSEC_INVALID_PARAM;
+	}
+
+	value = mmio_read_32(bsec_base + BSEC_OTP_CONF_OFF);
+	cfg->power = (uint8_t)((value & BSEC_CONF_POWER_UP_MASK) >>
+						BSEC_CONF_POWER_UP_SHIFT);
+	cfg->freq = (uint8_t)((value & BSEC_CONF_FRQ_MASK) >>
+						BSEC_CONF_FRQ_SHIFT);
+	cfg->pulse_width = (uint8_t)((value & BSEC_CONF_PRG_WIDTH_MASK) >>
+						BSEC_CONF_PRG_WIDTH_SHIFT);
+	cfg->tread = (uint8_t)((value & BSEC_CONF_TREAD_MASK) >>
+						BSEC_CONF_TREAD_SHIFT);
+
+	value = mmio_read_32(bsec_base + BSEC_OTP_LOCK_OFF);
+	cfg->upper_otp_lock = (uint8_t)((value & UPPER_OTP_LOCK_MASK) >>
+						UPPER_OTP_LOCK_SHIFT);
+	cfg->den_lock = (uint8_t)((value & DENREG_LOCK_MASK) >>
+						DENREG_LOCK_SHIFT);
+	cfg->prog_lock = (uint8_t)((value & GPLOCK_LOCK_MASK) >>
+						GPLOCK_LOCK_SHIFT);
+
+	return BSEC_OK;
+}
+
+/*
+ * bsec_shadow_register: copy SAFMEM OTP to BSEC data.
+ * otp: OTP number.
+ * return value: BSEC_OK if no error.
+ */
+uint32_t bsec_shadow_register(uint32_t otp)
+{
+	uint32_t result;
+	bool power_up = false;
+
+	if (otp > STM32MP1_OTP_MAX_ID) {
+		return BSEC_INVALID_PARAM;
+	}
+
+	/* Check if shadowing of OTP is locked */
+	if (bsec_read_sr_lock(otp)) {
+		VERBOSE("BSEC: OTP %i is locked and will not be refreshed\n",
+			otp);
+	}
+
+	if ((bsec_get_status() & BSEC_MODE_PWR_MASK) == 0U) {
+		result = bsec_power_safmem(true);
+
+		if (result != BSEC_OK) {
+			return result;
+		}
+
+		power_up = true;
+	}
+
+	bsec_lock();
+
+	/* Set BSEC_OTP_CTRL_OFF and set ADDR with the OTP value */
+	mmio_write_32(bsec_base + BSEC_OTP_CTRL_OFF, otp | BSEC_READ);
+
+	while ((bsec_get_status() & BSEC_MODE_BUSY_MASK) != 0U) {
+		;
+	}
+
+	result = bsec_check_error(otp);
+
+	bsec_unlock();
+
+	if (power_up) {
+		if (bsec_power_safmem(false) != BSEC_OK) {
+			panic();
+		}
+	}
+
+	return result;
+}
+
+/*
+ * bsec_read_otp: read an OTP data value.
+ * val: read value.
+ * otp: OTP number.
+ * return value: BSEC_OK if no error.
+ */
+uint32_t bsec_read_otp(uint32_t *val, uint32_t otp)
+{
+	uint32_t result;
+
+	if (otp > STM32MP1_OTP_MAX_ID) {
+		return BSEC_INVALID_PARAM;
+	}
+
+	bsec_lock();
+
+	*val = mmio_read_32(bsec_base + BSEC_OTP_DATA_OFF +
+			    (otp * sizeof(uint32_t)));
+
+	result = bsec_check_error(otp);
+
+	bsec_unlock();
+
+	return result;
+}
+
+/*
+ * bsec_write_otp: write value in BSEC data register.
+ * val: value to write.
+ * otp: OTP number.
+ * return value: BSEC_OK if no error.
+ */
+uint32_t bsec_write_otp(uint32_t val, uint32_t otp)
+{
+	uint32_t result;
+
+	if (otp > STM32MP1_OTP_MAX_ID) {
+		return BSEC_INVALID_PARAM;
+	}
+
+	/* Check if programming of OTP is locked */
+	if (bsec_read_sw_lock(otp)) {
+		VERBOSE("BSEC: OTP %i is locked and write will be ignored\n",
+			otp);
+	}
+
+	bsec_lock();
+
+	mmio_write_32(bsec_base + BSEC_OTP_DATA_OFF +
+		      (otp * sizeof(uint32_t)), val);
+
+	result = bsec_check_error(otp);
+
+	bsec_unlock();
+
+	return result;
+}
+
+/*
+ * bsec_program_otp: program a bit in SAFMEM after the prog.
+ *	The OTP data is not refreshed.
+ * val: value to program.
+ * otp: OTP number.
+ * return value: BSEC_OK if no error.
+ */
+uint32_t bsec_program_otp(uint32_t val, uint32_t otp)
+{
+	uint32_t result;
+	bool power_up = false;
+
+	if (otp > STM32MP1_OTP_MAX_ID) {
+		return BSEC_INVALID_PARAM;
+	}
+
+	/* Check if programming of OTP is locked */
+	if (bsec_read_sp_lock(otp)) {
+		WARN("BSEC: OTP locked, prog will be ignored\n");
+	}
+
+	if ((mmio_read_32(bsec_base + BSEC_OTP_LOCK_OFF) &
+	     BIT(BSEC_LOCK_PROGRAM)) != 0U) {
+		WARN("BSEC: GPLOCK activated, prog will be ignored\n");
+	}
+
+	if ((bsec_get_status() & BSEC_MODE_PWR_MASK) == 0U) {
+		result = bsec_power_safmem(true);
+
+		if (result != BSEC_OK) {
+			return result;
+		}
+
+		power_up = true;
+	}
+
+	bsec_lock();
+
+	/* Set value in write register */
+	mmio_write_32(bsec_base + BSEC_OTP_WRDATA_OFF, val);
+
+	/* Set BSEC_OTP_CTRL_OFF and set ADDR with the OTP value */
+	mmio_write_32(bsec_base + BSEC_OTP_CTRL_OFF, otp | BSEC_WRITE);
+
+	while ((bsec_get_status() & BSEC_MODE_BUSY_MASK) != 0U) {
+		;
+	}
+
+	if ((bsec_get_status() & BSEC_MODE_PROGFAIL_MASK) != 0U) {
+		result = BSEC_PROG_FAIL;
+	} else {
+		result = bsec_check_error(otp);
+	}
+
+	bsec_unlock();
+
+	if (power_up) {
+		if (bsec_power_safmem(false) != BSEC_OK) {
+			panic();
+		}
+	}
+
+	return result;
+}
+
+/*
+ * bsec_permanent_lock_otp: permanent lock of OTP in SAFMEM.
+ * otp: OTP number.
+ * return value: BSEC_OK if no error.
+ */
+uint32_t bsec_permanent_lock_otp(uint32_t otp)
+{
+	uint32_t result;
+	bool power_up = false;
+	uint32_t data;
+	uint32_t addr;
+
+	if (otp > STM32MP1_OTP_MAX_ID) {
+		return BSEC_INVALID_PARAM;
+	}
+
+	if ((bsec_get_status() & BSEC_MODE_PWR_MASK) == 0U) {
+		result = bsec_power_safmem(true);
+
+		if (result != BSEC_OK) {
+			return result;
+		}
+
+		power_up = true;
+	}
+
+	if (otp < STM32MP1_UPPER_OTP_START) {
+		addr = otp >> ADDR_LOWER_OTP_PERLOCK_SHIFT;
+		data = DATA_LOWER_OTP_PERLOCK_BIT <<
+		       ((otp & DATA_LOWER_OTP_PERLOCK_MASK) << 1U);
+	} else {
+		addr = (otp >> ADDR_UPPER_OTP_PERLOCK_SHIFT) + 2U;
+		data = DATA_UPPER_OTP_PERLOCK_BIT <<
+		       (otp & DATA_UPPER_OTP_PERLOCK_MASK);
+	}
+
+	bsec_lock();
+
+	/* Set value in write register */
+	mmio_write_32(bsec_base + BSEC_OTP_WRDATA_OFF, data);
+
+	/* Set BSEC_OTP_CTRL_OFF and set ADDR with the OTP value */
+	mmio_write_32(bsec_base + BSEC_OTP_CTRL_OFF,
+		      addr | BSEC_WRITE | BSEC_LOCK);
+
+	while ((bsec_get_status() & BSEC_MODE_BUSY_MASK) != 0U) {
+		;
+	}
+
+	if ((bsec_get_status() & BSEC_MODE_PROGFAIL_MASK) != 0U) {
+		result = BSEC_PROG_FAIL;
+	} else {
+		result = bsec_check_error(otp);
+	}
+
+	bsec_unlock();
+
+	if (power_up) {
+		if (bsec_power_safmem(false) != BSEC_OK) {
+			panic();
+		}
+	}
+
+	return result;
+}
+
+/*
+ * bsec_write_debug_conf: write value in debug feature
+ *	to enable/disable debug service.
+ * val: value to write.
+ * return value: BSEC_OK if no error.
+ */
+uint32_t bsec_write_debug_conf(uint32_t val)
+{
+	uint32_t result = BSEC_ERROR;
+	uint32_t masked_val = val & BSEC_DEN_ALL_MSK;
+
+	bsec_lock();
+
+	mmio_write_32(bsec_base + BSEC_DEN_OFF, masked_val);
+
+	if ((mmio_read_32(bsec_base + BSEC_DEN_OFF) ^ masked_val) == 0U) {
+		result = BSEC_OK;
+	}
+
+	bsec_unlock();
+
+	return result;
+}
+
+/*
+ * bsec_read_debug_conf: read debug configuration.
+ */
+uint32_t bsec_read_debug_conf(void)
+{
+	return mmio_read_32(bsec_base + BSEC_DEN_OFF);
+}
+
+/*
+ * bsec_get_status: return status register value.
+ */
+uint32_t bsec_get_status(void)
+{
+	return mmio_read_32(bsec_base + BSEC_OTP_STATUS_OFF);
+}
+
+/*
+ * bsec_get_hw_conf: return hardware configuration.
+ */
+uint32_t bsec_get_hw_conf(void)
+{
+	return mmio_read_32(bsec_base + BSEC_IPHW_CFG_OFF);
+}
+
+/*
+ * bsec_get_version: return BSEC version.
+ */
+uint32_t bsec_get_version(void)
+{
+	return mmio_read_32(bsec_base + BSEC_IPVR_OFF);
+}
+
+/*
+ * bsec_get_id: return BSEC ID.
+ */
+uint32_t bsec_get_id(void)
+{
+	return mmio_read_32(bsec_base + BSEC_IP_ID_OFF);
+}
+
+/*
+ * bsec_get_magic_id: return BSEC magic number.
+ */
+uint32_t bsec_get_magic_id(void)
+{
+	return mmio_read_32(bsec_base + BSEC_IP_MAGIC_ID_OFF);
+}
+
+/*
+ * bsec_write_sr_lock: write shadow-read lock.
+ * otp: OTP number.
+ * value: value to write in the register.
+ *	Must be always 1.
+ * return: true if OTP is locked, else false.
+ */
+bool bsec_write_sr_lock(uint32_t otp, uint32_t value)
+{
+	bool result = false;
+	uint32_t bank = otp_bank_offset(otp);
+	uint32_t bank_value;
+	uint32_t otp_mask = BIT(otp & BSEC_OTP_MASK);
+
+	bsec_lock();
+
+	bank_value = mmio_read_32(bsec_base + BSEC_SRLOCK_OFF + bank);
+
+	if ((bank_value & otp_mask) == value) {
+		/*
+		 * In case of write don't need to write,
+		 * the lock is already set.
+		 */
+		if (value != 0U) {
+			result = true;
+		}
+	} else {
+		if (value != 0U) {
+			bank_value = bank_value | otp_mask;
+		} else {
+			bank_value = bank_value & ~otp_mask;
+		}
+
+		/*
+		 * We can write 0 in all other OTP
+		 * if the lock is activated in one of other OTP.
+		 * Write 0 has no effect.
+		 */
+		mmio_write_32(bsec_base + BSEC_SRLOCK_OFF + bank, bank_value);
+		result = true;
+	}
+
+	bsec_unlock();
+
+	return result;
+}
+
+/*
+ * bsec_read_sr_lock: read shadow-read lock.
+ * otp: OTP number.
+ * return: true if otp is locked, else false.
+ */
+bool bsec_read_sr_lock(uint32_t otp)
+{
+	uint32_t bank = otp_bank_offset(otp);
+	uint32_t otp_mask = BIT(otp & BSEC_OTP_MASK);
+	uint32_t bank_value = mmio_read_32(bsec_base + BSEC_SRLOCK_OFF + bank);
+
+	return (bank_value & otp_mask) != 0U;
+}
+
+/*
+ * bsec_write_sw_lock: write shadow-write lock.
+ * otp: OTP number.
+ * value: Value to write in the register.
+ *	Must be always 1.
+ * return: true if OTP is locked, else false.
+ */
+bool bsec_write_sw_lock(uint32_t otp, uint32_t value)
+{
+	bool result = false;
+	uint32_t bank = otp_bank_offset(otp);
+	uint32_t otp_mask = BIT(otp & BSEC_OTP_MASK);
+	uint32_t bank_value;
+
+	bsec_lock();
+
+	bank_value = mmio_read_32(bsec_base + BSEC_SWLOCK_OFF + bank);
+
+	if ((bank_value & otp_mask) == value) {
+		/*
+		 * In case of write don't need to write,
+		 * the lock is already set.
+		 */
+		if (value != 0U) {
+			result = true;
+		}
+	} else {
+		if (value != 0U) {
+			bank_value = bank_value | otp_mask;
+		} else {
+			bank_value = bank_value & ~otp_mask;
+		}
+
+		/*
+		 * We can write 0 in all other OTP
+		 * if the lock is activated in one of other OTP.
+		 * Write 0 has no effect.
+		 */
+		mmio_write_32(bsec_base + BSEC_SWLOCK_OFF + bank, bank_value);
+		result = true;
+	}
+
+	bsec_unlock();
+
+	return result;
+}
+
+/*
+ * bsec_read_sw_lock: read shadow-write lock.
+ * otp: OTP number.
+ * return: true if OTP is locked, else false.
+ */
+bool bsec_read_sw_lock(uint32_t otp)
+{
+	uint32_t bank = otp_bank_offset(otp);
+	uint32_t otp_mask = BIT(otp & BSEC_OTP_MASK);
+	uint32_t bank_value = mmio_read_32(bsec_base + BSEC_SWLOCK_OFF + bank);
+
+	return (bank_value & otp_mask) != 0U;
+}
+
+/*
+ * bsec_write_sp_lock: write shadow-program lock.
+ * otp: OTP number.
+ * value: Value to write in the register.
+ *	Must be always 1.
+ * return: true if OTP is locked, else false.
+ */
+bool bsec_write_sp_lock(uint32_t otp, uint32_t value)
+{
+	bool result = false;
+	uint32_t bank = otp_bank_offset(otp);
+	uint32_t bank_value;
+	uint32_t otp_mask = BIT(otp & BSEC_OTP_MASK);
+
+	bsec_lock();
+
+	bank_value = mmio_read_32(bsec_base + BSEC_SPLOCK_OFF + bank);
+
+	if ((bank_value & otp_mask) == value) {
+		/*
+		 * In case of write don't need to write,
+		 * the lock is already set.
+		 */
+		if (value != 0U) {
+			result = true;
+		}
+	} else {
+		if (value != 0U) {
+			bank_value = bank_value | otp_mask;
+		} else {
+			bank_value = bank_value & ~otp_mask;
+		}
+
+		/*
+		 * We can write 0 in all other OTP
+		 * if the lock is activated in one of other OTP.
+		 * Write 0 has no effect.
+		 */
+		mmio_write_32(bsec_base + BSEC_SPLOCK_OFF + bank, bank_value);
+		result = true;
+	}
+
+	bsec_unlock();
+
+	return result;
+}
+
+/*
+ * bsec_read_sp_lock: read shadow-program lock.
+ * otp: OTP number.
+ * return: true if OTP is locked, else false.
+ */
+bool bsec_read_sp_lock(uint32_t otp)
+{
+	uint32_t bank = otp_bank_offset(otp);
+	uint32_t otp_mask = BIT(otp & BSEC_OTP_MASK);
+	uint32_t bank_value = mmio_read_32(bsec_base + BSEC_SPLOCK_OFF + bank);
+
+	return (bank_value & otp_mask) != 0U;
+}
+
+/*
+ * bsec_wr_lock: Read permanent lock status.
+ * otp: OTP number.
+ * return: true if OTP is locked, else false.
+ */
+bool bsec_wr_lock(uint32_t otp)
+{
+	uint32_t bank = otp_bank_offset(otp);
+	uint32_t lock_bit = BIT(otp & BSEC_OTP_MASK);
+
+	if ((mmio_read_32(bsec_base + BSEC_WRLOCK_OFF + bank) &
+	     lock_bit) != 0U) {
+		/*
+		 * In case of write don't need to write,
+		 * the lock is already set.
+		 */
+		return true;
+	}
+
+	return false;
+}
+
+/*
+ * bsec_otp_lock: Lock Upper OTP or Global programming or debug enable
+ * service: Service to lock see header file.
+ * value: Value to write must always set to 1 (only use for debug purpose).
+ * return: BSEC_OK if succeed.
+ */
+uint32_t bsec_otp_lock(uint32_t service, uint32_t value)
+{
+	uintptr_t reg = bsec_base + BSEC_OTP_LOCK_OFF;
+
+	switch (service) {
+	case BSEC_LOCK_UPPER_OTP:
+		mmio_write_32(reg, value << BSEC_LOCK_UPPER_OTP);
+		break;
+	case BSEC_LOCK_DEBUG:
+		mmio_write_32(reg, value << BSEC_LOCK_DEBUG);
+		break;
+	case BSEC_LOCK_PROGRAM:
+		mmio_write_32(reg, value << BSEC_LOCK_PROGRAM);
+		break;
+	default:
+		return BSEC_INVALID_PARAM;
+	}
+
+	return BSEC_OK;
+}
+
+/*
+ * bsec_power_safmem: Activate or deactivate SAFMEM power.
+ * power: true to power up, false to power down.
+ * return: BSEC_OK if succeed.
+ */
+static uint32_t bsec_power_safmem(bool power)
+{
+	uint32_t register_val;
+	uint32_t timeout = BSEC_TIMEOUT_VALUE;
+
+	bsec_lock();
+
+	register_val = mmio_read_32(bsec_base + BSEC_OTP_CONF_OFF);
+
+	if (power) {
+		register_val |= BSEC_CONF_POWER_UP_MASK;
+	} else {
+		register_val &= ~BSEC_CONF_POWER_UP_MASK;
+	}
+
+	mmio_write_32(bsec_base + BSEC_OTP_CONF_OFF, register_val);
+
+	/* Waiting loop */
+	if (power) {
+		while (((bsec_get_status() & BSEC_MODE_PWR_MASK) == 0U) &&
+		       (timeout != 0U)) {
+			timeout--;
+		}
+	} else {
+		while (((bsec_get_status() & BSEC_MODE_PWR_MASK) != 0U) &&
+		       (timeout != 0U)) {
+			timeout--;
+		}
+	}
+
+	bsec_unlock();
+
+	if (timeout == 0U) {
+		return BSEC_TIMEOUT;
+	}
+
+	return BSEC_OK;
+}
+
+/*
+ * bsec_mode_is_closed_device: read OTP secure sub-mode.
+ * return: false if open_device and true of closed_device.
+ */
+bool bsec_mode_is_closed_device(void)
+{
+	uint32_t value;
+
+	if ((bsec_shadow_register(DATA0_OTP) != BSEC_OK) ||
+	    (bsec_read_otp(&value, DATA0_OTP) != BSEC_OK)) {
+		return true;
+	}
+
+	return (value & DATA0_OTP_SECURED) == DATA0_OTP_SECURED;
+}
+
+/*
+ * bsec_shadow_read_otp: Load OTP from SAFMEM and provide its value
+ * otp_value: read value.
+ * word: OTP number.
+ * return value: BSEC_OK if no error.
+ */
+uint32_t bsec_shadow_read_otp(uint32_t *otp_value, uint32_t word)
+{
+	uint32_t result;
+
+	result = bsec_shadow_register(word);
+	if (result != BSEC_OK) {
+		ERROR("BSEC: %u Shadowing Error %i\n", word, result);
+		return result;
+	}
+
+	result = bsec_read_otp(otp_value, word);
+	if (result != BSEC_OK) {
+		ERROR("BSEC: %u Read Error %i\n", word, result);
+	}
+
+	return result;
+}
+
+/*
+ * bsec_check_nsec_access_rights: check non-secure access rights to target OTP.
+ * otp: OTP number.
+ * return: BSEC_OK if authorized access.
+ */
+uint32_t bsec_check_nsec_access_rights(uint32_t otp)
+{
+#if defined(IMAGE_BL32)
+	if (otp > STM32MP1_OTP_MAX_ID) {
+		return BSEC_INVALID_PARAM;
+	}
+
+	if (otp >= STM32MP1_UPPER_OTP_START) {
+		/* Check if BSEC is in OTP-SECURED closed_device state. */
+		if (bsec_mode_is_closed_device()) {
+			if (!non_secure_can_access(otp)) {
+				return BSEC_ERROR;
+			}
+		}
+	}
+#endif
+
+	return BSEC_OK;
+}
+

drivers/st/clk/stm32mp1_clkfunc.c

 /*
- * Copyright (c) 2017-2018, STMicroelectronics - All Rights Reserved
+ * Copyright (c) 2017-2019, STMicroelectronics - All Rights Reserved
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -31,11 +31,19 @@ const char *stm32mp_osc_node_label[NB_OSC] = {
 	[_USB_PHY_48] = "ck_usbo_48m"
 };
 
+/*******************************************************************************
+ * This function returns the RCC node in the device tree.
+ ******************************************************************************/
+static int fdt_get_rcc_node(void *fdt)
+{
+	return fdt_node_offset_by_compatible(fdt, -1, DT_RCC_CLK_COMPAT);
+}
+
 /*******************************************************************************
  * This function reads the frequency of an oscillator from its name.
  * It reads the value indicated inside the device tree.
- * Returns 0 if success, and a negative value else.
- * If success, value is stored in the second parameter.
+ * Returns 0 on success, and a negative FDT/ERRNO error code on failure.
+ * On success, value is stored in the second parameter.
  ******************************************************************************/
 int fdt_osc_read_freq(const char *name, uint32_t *freq)
 {
@@ -127,7 +135,7 @@ bool fdt_osc_read_bool(enum stm32mp_osc_id osc_id, const char *prop_name)
 
 /*******************************************************************************
  * This function reads a value of a oscillator property from its id.
- * Returns value if success, and a default value if property not found.
+ * Returns value on success, and a default value if property not found.
  * Default value is passed as parameter.
  ******************************************************************************/
 uint32_t fdt_osc_read_uint32_default(enum stm32mp_osc_id osc_id,
@@ -240,7 +248,7 @@ int fdt_rcc_read_uint32_array(const char *prop_name,
 /*******************************************************************************
  * This function gets the subnode offset in rcc-clk section from its name.
  * It reads the values indicated inside the device tree.
- * Returns offset if success, and a negative value else.
+ * Returns offset on success, and a negative FDT/ERRNO error code on failure.
  ******************************************************************************/
 int fdt_rcc_subnode_offset(const char *name)
 {
@@ -251,7 +259,7 @@ int fdt_rcc_subnode_offset(const char *name)
 		return -ENOENT;
 	}
 
-	node = fdt_node_offset_by_compatible(fdt, -1, DT_RCC_CLK_COMPAT);
+	node = fdt_get_rcc_node(fdt);
 	if (node < 0) {
 		return -FDT_ERR_NOTFOUND;
 	}
@@ -280,7 +288,7 @@ const fdt32_t *fdt_rcc_read_prop(const char *prop_name, int *lenp)
 		return NULL;
 	}
 
-	node = fdt_node_offset_by_compatible(fdt, -1, DT_RCC_CLK_COMPAT);
+	node = fdt_get_rcc_node(fdt);
 	if (node < 0) {
 		return NULL;
 	}
@@ -297,7 +305,7 @@ const fdt32_t *fdt_rcc_read_prop(const char *prop_name, int *lenp)
 /*******************************************************************************
  * This function gets the secure status for rcc node.
  * It reads secure-status in device tree.
- * Returns 1 if rcc is available from secure world, 0 else.
+ * Returns true if rcc is available from secure world, false if not.
  ******************************************************************************/
 bool fdt_get_rcc_secure_status(void)
 {
@@ -308,18 +316,18 @@ bool fdt_get_rcc_secure_status(void)
 		return false;
 	}
 
-	node = fdt_node_offset_by_compatible(fdt, -1, DT_RCC_COMPAT);
+	node = fdt_get_rcc_node(fdt);
 	if (node < 0) {
 		return false;
 	}
 
-	return fdt_check_secure_status(node);
+	return (fdt_get_status(node) & DT_SECURE) != 0U;
 }
 
 /*******************************************************************************
  * This function reads the stgen base address.
  * It reads the value indicated inside the device tree.
- * Returns address if success, and NULL value else.
+ * Returns address on success, and NULL value on failure.
  ******************************************************************************/
 uintptr_t fdt_get_stgen_base(void)
 {
@@ -347,7 +355,7 @@ uintptr_t fdt_get_stgen_base(void)
 /*******************************************************************************
  * This function gets the clock ID of the given node.
  * It reads the value indicated inside the device tree.
- * Returns ID if success, and a negative value else.
+ * Returns ID on success, and a negative FDT/ERRNO error code on failure.
  ******************************************************************************/
 int fdt_get_clock_id(int node)
 {

drivers/st/ddr/stm32mp1_ram.c

 /*
- * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
+ * Copyright (C) 2018-2019, STMicroelectronics - All Rights Reserved
  *
  * SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
  */
@@ -25,7 +25,7 @@
 
 static struct ddr_info ddr_priv_data;
 
-int stm32mp1_ddr_clk_enable(struct ddr_info *priv, uint16_t mem_speed)
+int stm32mp1_ddr_clk_enable(struct ddr_info *priv, uint32_t mem_speed)
 {
 	unsigned long ddrphy_clk, ddr_clk, mem_speed_hz;
 
@@ -33,10 +33,10 @@ int stm32mp1_ddr_clk_enable(struct ddr_info *priv, uint16_t mem_speed)
 
 	ddrphy_clk = stm32mp1_clk_get_rate(DDRPHYC);
 
-	VERBOSE("DDR: mem_speed (%d MHz), RCC %ld MHz\n",
-		mem_speed, ddrphy_clk / 1000U / 1000U);
+	VERBOSE("DDR: mem_speed (%d kHz), RCC %ld kHz\n",
+		mem_speed, ddrphy_clk / 1000U);
 
-	mem_speed_hz = (uint32_t)mem_speed * 1000U * 1000U;
+	mem_speed_hz = mem_speed * 1000U;
 
 	/* Max 10% frequency delta */
 	if (ddrphy_clk > mem_speed_hz) {
@@ -44,9 +44,9 @@ int stm32mp1_ddr_clk_enable(struct ddr_info *priv, uint16_t mem_speed)
 	} else {
 		ddr_clk = mem_speed_hz - ddrphy_clk;
 	}
-	if (ddr_clk > mem_speed_hz) {
-		ERROR("DDR expected freq %d MHz, current is %ld MHz\n",
-		      mem_speed, ddrphy_clk / 1000U / 1000U);
+	if (ddr_clk > (mem_speed_hz / 10)) {
+		ERROR("DDR expected freq %d kHz, current is %ld kHz\n",
+		      mem_speed, ddrphy_clk / 1000U);
 		return -1;
 	}
 	return 0;
@@ -208,11 +208,16 @@ static int stm32mp1_ddr_setup(void)
 		return -EINVAL;
 	}
 
-	config.info.speed =
-		(uint16_t)fdt_read_uint32_default(node, "st,mem-speed",
-						  STM32MP1_DDR_SPEED_DFLT);
-	config.info.size = fdt_read_uint32_default(node, "st,mem-size",
-						   STM32MP1_DDR_SIZE_DFLT);
+	config.info.speed = fdt_read_uint32_default(node, "st,mem-speed", 0);
+	if (!config.info.speed) {
+		VERBOSE("%s: no st,mem-speed\n", __func__);
+		return -EINVAL;
+	}
+	config.info.size = fdt_read_uint32_default(node, "st,mem-size", 0);
+	if (!config.info.size) {
+		VERBOSE("%s: no st,mem-size\n", __func__);
+		return -EINVAL;
+	}
 	config.info.name = fdt_getprop(fdt, node, "st,mem-name", &len);
 	if (config.info.name == NULL) {
 		VERBOSE("%s: no st,mem-name\n", __func__);
@@ -222,7 +227,7 @@ static int stm32mp1_ddr_setup(void)
 
 	for (idx = 0; idx < ARRAY_SIZE(param); idx++) {
 		ret = fdt_read_uint32_array(node, param[idx].name,
-					    (void *)((uint32_t)&config +
+					    (void *)((uintptr_t)&config +
 						     param[idx].offset),
 					    param[idx].size);
 
@@ -261,8 +266,8 @@ static int stm32mp1_ddr_setup(void)
 	VERBOSE("%s : ram size(%x, %x)\n", __func__,
 		(uint32_t)priv->info.base, (uint32_t)priv->info.size);
 
-	dcsw_op_all(DC_OP_CISW);
 	write_sctlr(read_sctlr() & ~SCTLR_C_BIT);
+	dcsw_op_all(DC_OP_CISW);
 
 	uret = ddr_test_data_bus();
 	if (uret != 0U) {

drivers/st/gpio/stm32_gpio.c

 /*
- * Copyright (c) 2016-2018, STMicroelectronics - All Rights Reserved
+ * Copyright (c) 2016-2019, STMicroelectronics - All Rights Reserved
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
 
+#include <assert.h>
+#include <errno.h>
 #include <stdbool.h>
 
+#include <libfdt.h>
+
+#include <platform_def.h>
+
 #include <common/bl_common.h>
 #include <common/debug.h>
 #include <drivers/st/stm32_gpio.h>
+#include <drivers/st/stm32mp1_clk.h>
+#include <drivers/st/stm32mp1_clkfunc.h>
 #include <lib/mmio.h>
+#include <lib/utils_def.h>
+
+#define DT_GPIO_BANK_SHIFT	12
+#define DT_GPIO_BANK_MASK	GENMASK(16, 12)
+#define DT_GPIO_PIN_SHIFT	8
+#define DT_GPIO_PIN_MASK	GENMASK(11, 8)
+#define DT_GPIO_MODE_MASK	GENMASK(7, 0)
 
-static bool check_gpio(uint32_t bank, uint32_t pin)
+/*******************************************************************************
+ * This function gets GPIO bank node in DT.
+ * Returns node offset if status is okay in DT, else return 0
+ ******************************************************************************/
+static int ckeck_gpio_bank(void *fdt, uint32_t bank, int pinctrl_node)
 {
-	if (pin > GPIO_PIN_MAX) {
-		ERROR("%s: wrong pin number (%d)\n", __func__, pin);
-		return false;
+	int pinctrl_subnode;
+	uint32_t bank_offset = stm32_get_gpio_bank_offset(bank);
+
+	fdt_for_each_subnode(pinctrl_subnode, fdt, pinctrl_node) {
+		const fdt32_t *cuint;
+
+		if (fdt_getprop(fdt, pinctrl_subnode,
+				"gpio-controller", NULL) == NULL) {
+			continue;
 		}
 
-	if ((bank > GPIO_BANK_K) && (bank != GPIO_BANK_Z)) {
-		ERROR("%s: wrong GPIO bank number (%d)\n", __func__, bank);
-		return false;
+		cuint = fdt_getprop(fdt, pinctrl_subnode, "reg", NULL);
+		if (cuint == NULL) {
+			continue;
 		}
 
-	return true;
+		if ((fdt32_to_cpu(*cuint) == bank_offset) &&
+		    (fdt_get_status(pinctrl_subnode) != DT_DISABLED)) {
+			return pinctrl_subnode;
+		}
+	}
+
+	return 0;
 }
 
-void set_gpio(uint32_t bank, uint32_t pin, uint32_t mode, uint32_t speed,
-	      uint32_t pull, uint32_t alternate)
+/*******************************************************************************
+ * This function gets the pin settings from DT information.
+ * When analyze and parsing is done, set the GPIO registers.
+ * Returns 0 on success and a negative FDT error code on failure.
+ ******************************************************************************/
+static int dt_set_gpio_config(void *fdt, int node, uint8_t status)
 {
-	volatile uint32_t bank_address;
+	const fdt32_t *cuint, *slewrate;
+	int len;
+	int pinctrl_node;
+	uint32_t i;
+	uint32_t speed = GPIO_SPEED_LOW;
+	uint32_t pull = GPIO_NO_PULL;
 
-	if (!check_gpio(bank, pin)) {
-		return;
+	cuint = fdt_getprop(fdt, node, "pinmux", &len);
+	if (cuint == NULL) {
+		return -FDT_ERR_NOTFOUND;
 	}
 
-	if (bank == GPIO_BANK_Z) {
-		bank_address = STM32_GPIOZ_BANK;
+	pinctrl_node = fdt_parent_offset(fdt, fdt_parent_offset(fdt, node));
+	if (pinctrl_node < 0) {
+		return -FDT_ERR_NOTFOUND;
+	}
+
+	slewrate = fdt_getprop(fdt, node, "slew-rate", NULL);
+	if (slewrate != NULL) {
+		speed = fdt32_to_cpu(*slewrate);
+	}
+
+	if (fdt_getprop(fdt, node, "bias-pull-up", NULL) != NULL) {
+		pull = GPIO_PULL_UP;
+	} else if (fdt_getprop(fdt, node, "bias-pull-down", NULL) != NULL) {
+		pull = GPIO_PULL_DOWN;
 	} else {
-		bank_address = STM32_GPIOA_BANK +
-			(bank * STM32_GPIO_BANK_OFFSET);
+		VERBOSE("No bias configured in node %d\n", node);
+	}
+
+	for (i = 0U; i < ((uint32_t)len / sizeof(uint32_t)); i++) {
+		uint32_t pincfg;
+		uint32_t bank;
+		uint32_t pin;
+		uint32_t mode;
+		uint32_t alternate = GPIO_ALTERNATE_(0);
+		int bank_node;
+		int clk;
+
+		pincfg = fdt32_to_cpu(*cuint);
+		cuint++;
+
+		bank = (pincfg & DT_GPIO_BANK_MASK) >> DT_GPIO_BANK_SHIFT;
+
+		pin = (pincfg & DT_GPIO_PIN_MASK) >> DT_GPIO_PIN_SHIFT;
+
+		mode = pincfg & DT_GPIO_MODE_MASK;
+
+		switch (mode) {
+		case 0:
+			mode = GPIO_MODE_INPUT;
+			break;
+		case 1 ... 16:
+			alternate = mode - 1U;
+			mode = GPIO_MODE_ALTERNATE;
+			break;
+		case 17:
+			mode = GPIO_MODE_ANALOG;
+			break;
+		default:
+			mode = GPIO_MODE_OUTPUT;
+			break;
+		}
+
+		if (fdt_getprop(fdt, node, "drive-open-drain", NULL) != NULL) {
+			mode |= GPIO_OPEN_DRAIN;
+		}
+
+		bank_node = ckeck_gpio_bank(fdt, bank, pinctrl_node);
+		if (bank_node == 0) {
+			ERROR("PINCTRL inconsistent in DT\n");
+			panic();
+		}
+
+		clk = fdt_get_clock_id(bank_node);
+		if (clk < 0) {
+			return -FDT_ERR_NOTFOUND;
+		}
+
+		/* Platform knows the clock: assert it is okay */
+		assert((unsigned long)clk == stm32_get_gpio_bank_clock(bank));
+
+		set_gpio(bank, pin, mode, speed, pull, alternate, status);
+	}
+
+	return 0;
+}
+
+/*******************************************************************************
+ * This function gets the pin settings from DT information.
+ * When analyze and parsing is done, set the GPIO registers.
+ * Returns 0 on success and a negative FDT/ERRNO error code on failure.
+ ******************************************************************************/
+int dt_set_pinctrl_config(int node)
+{
+	const fdt32_t *cuint;
+	int lenp = 0;
+	uint32_t i;
+	uint8_t status = fdt_get_status(node);
+	void *fdt;
+
+	if (fdt_get_address(&fdt) == 0) {
+		return -ENOENT;
+	}
+
+	if (status == DT_DISABLED) {
+		return -FDT_ERR_NOTFOUND;
+	}
+
+	cuint = fdt_getprop(fdt, node, "pinctrl-0", &lenp);
+	if (cuint == NULL) {
+		return -FDT_ERR_NOTFOUND;
+	}
+
+	for (i = 0; i < ((uint32_t)lenp / 4U); i++) {
+		int p_node, p_subnode;
+
+		p_node = fdt_node_offset_by_phandle(fdt, fdt32_to_cpu(*cuint));
+		if (p_node < 0) {
+			return -FDT_ERR_NOTFOUND;
 		}
 
-	mmio_clrbits_32(bank_address + GPIO_MODE_OFFSET,
+		fdt_for_each_subnode(p_subnode, fdt, p_node) {
+			int ret = dt_set_gpio_config(fdt, p_subnode, status);
+
+			if (ret < 0) {
+				return ret;
+			}
+		}
+
+		cuint++;
+	}
+
+	return 0;
+}
+
+void set_gpio(uint32_t bank, uint32_t pin, uint32_t mode, uint32_t speed,
+	      uint32_t pull, uint32_t alternate, uint8_t status)
+{
+	uintptr_t base = stm32_get_gpio_bank_base(bank);
+	unsigned long clock = stm32_get_gpio_bank_clock(bank);
+
+	assert(pin <= GPIO_PIN_MAX);
+
+	stm32mp1_clk_enable(clock);
+
+	mmio_clrbits_32(base + GPIO_MODE_OFFSET,
 			((uint32_t)GPIO_MODE_MASK << (pin << 1)));
-	mmio_setbits_32(bank_address + GPIO_MODE_OFFSET,
+	mmio_setbits_32(base + GPIO_MODE_OFFSET,
 			(mode & ~GPIO_OPEN_DRAIN) << (pin << 1));
 
 	if ((mode & GPIO_OPEN_DRAIN) != 0U) {
-		mmio_setbits_32(bank_address + GPIO_TYPE_OFFSET,
-				BIT(pin));
+		mmio_setbits_32(base + GPIO_TYPE_OFFSET, BIT(pin));
+	} else {
+		mmio_clrbits_32(base + GPIO_TYPE_OFFSET, BIT(pin));
 	}
 
-	mmio_clrbits_32(bank_address + GPIO_SPEED_OFFSET,
+	mmio_clrbits_32(base + GPIO_SPEED_OFFSET,
 			((uint32_t)GPIO_SPEED_MASK << (pin << 1)));
-	mmio_setbits_32(bank_address + GPIO_SPEED_OFFSET, speed << (pin << 1));
+	mmio_setbits_32(base + GPIO_SPEED_OFFSET, speed << (pin << 1));
 
-	mmio_clrbits_32(bank_address + GPIO_PUPD_OFFSET,
+	mmio_clrbits_32(base + GPIO_PUPD_OFFSET,
 			((uint32_t)GPIO_PULL_MASK << (pin << 1)));
-	mmio_setbits_32(bank_address + GPIO_PUPD_OFFSET, pull << (pin << 1));
+	mmio_setbits_32(base + GPIO_PUPD_OFFSET, pull << (pin << 1));
 
 	if (pin < GPIO_ALT_LOWER_LIMIT) {
-		mmio_clrbits_32(bank_address + GPIO_AFRL_OFFSET,
+		mmio_clrbits_32(base + GPIO_AFRL_OFFSET,
 				((uint32_t)GPIO_ALTERNATE_MASK << (pin << 2)));
-		mmio_setbits_32(bank_address + GPIO_AFRL_OFFSET,
+		mmio_setbits_32(base + GPIO_AFRL_OFFSET,
 				alternate << (pin << 2));
 	} else {
-		mmio_clrbits_32(bank_address + GPIO_AFRH_OFFSET,
+		mmio_clrbits_32(base + GPIO_AFRH_OFFSET,
 				((uint32_t)GPIO_ALTERNATE_MASK <<
 				 ((pin - GPIO_ALT_LOWER_LIMIT) << 2)));
-		mmio_setbits_32(bank_address + GPIO_AFRH_OFFSET,
+		mmio_setbits_32(base + GPIO_AFRH_OFFSET,
 				alternate << ((pin - GPIO_ALT_LOWER_LIMIT) <<
 					      2));
 	}
 
 	VERBOSE("GPIO %u mode set to 0x%x\n", bank,
-		mmio_read_32(bank_address + GPIO_MODE_OFFSET));
+		mmio_read_32(base + GPIO_MODE_OFFSET));
 	VERBOSE("GPIO %u speed set to 0x%x\n", bank,
-		mmio_read_32(bank_address + GPIO_SPEED_OFFSET));
+		mmio_read_32(base + GPIO_SPEED_OFFSET));
 	VERBOSE("GPIO %u mode pull to 0x%x\n", bank,
-		mmio_read_32(bank_address + GPIO_PUPD_OFFSET));
+		mmio_read_32(base + GPIO_PUPD_OFFSET));
 	VERBOSE("GPIO %u mode alternate low to 0x%x\n", bank,
-		mmio_read_32(bank_address + GPIO_AFRL_OFFSET));
+		mmio_read_32(base + GPIO_AFRL_OFFSET));
 	VERBOSE("GPIO %u mode alternate high to 0x%x\n", bank,
-		mmio_read_32(bank_address + GPIO_AFRH_OFFSET));
+		mmio_read_32(base + GPIO_AFRH_OFFSET));
+
+	stm32mp1_clk_disable((unsigned long)clock);
+}
+
+void set_gpio_secure_cfg(uint32_t bank, uint32_t pin, bool secure)
+{
+	uintptr_t base = stm32_get_gpio_bank_base(bank);
+	int clock = stm32_get_gpio_bank_clock(bank);
+
+	assert(pin <= GPIO_PIN_MAX);
+
+	stm32mp1_clk_enable((unsigned long)clock);
+
+	if (secure) {
+		mmio_setbits_32(base + GPIO_SECR_OFFSET, BIT(pin));
+	} else {
+		mmio_clrbits_32(base + GPIO_SECR_OFFSET, BIT(pin));
+	}
+
+	stm32mp1_clk_disable((unsigned long)clock);
 }

drivers/st/pmic/stm32_i2c.c → drivers/st/i2c/stm32_i2c.c

 /*
- * Copyright (c) 2016-2018, STMicroelectronics - All Rights Reserved
+ * Copyright (c) 2016-2019, STMicroelectronics - All Rights Reserved
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */

drivers/st/io/io_stm32image.c

 /*
- * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2018-2019, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -94,6 +94,8 @@ static int stm32image_dev_open(const uintptr_t init_params,
 	for (i = 0; i < STM32_PART_NUM; i++) {
 		memcpy(stm32image_dev.part_info[i].name,
 		       device_info->part_info[i].name, MAX_PART_NAME_SIZE);
+		stm32image_dev.part_info[i].binary_type =
+			device_info->part_info[i].binary_type;
 		stm32image_dev.part_info[i].part_offset =
 			device_info->part_info[i].part_offset;
 		stm32image_dev.part_info[i].bkp_offset =
@@ -193,21 +195,29 @@ static int stm32image_partition_size(io_entity_t *entity, size_t *length)
 		result = io_read(backend_handle, (uintptr_t)header,
 				 MAX_LBA_SIZE, (size_t *)&bytes_read);
 		if (result != 0) {
+			if (current_part->bkp_offset == 0U) {
 				ERROR("%s: io_read (%i)\n", __func__, result);
-			break;
+			}
+			header->magic = 0;
 		}
 
 		if ((header->magic != BOOT_API_IMAGE_HEADER_MAGIC_NB) ||
 		    (header->binary_type != current_part->binary_type) ||
 		    (header->image_length >= stm32image_dev.device_size)) {
-			WARN("%s: partition %s wrong header\n",
-			     __func__, current_part->name);
+			VERBOSE("%s: partition %s not found at %x\n",
+				__func__, current_part->name, *stm32_img);
+
+			if (current_part->bkp_offset == 0U) {
+				result = -ENOMEM;
+				break;
+			}
 
 			/* Header not correct, check next offset for backup */
 			*stm32_img += current_part->bkp_offset;
 			if (*stm32_img > stm32image_dev.device_size) {
 				/* No backup found, end of device reached */
-				WARN("Out of memory\n");
+				WARN("%s : partition %s not found\n",
+				     __func__, current_part->name);
 				result = -ENOMEM;
 				break;
 			}
@@ -221,9 +231,13 @@ static int stm32image_partition_size(io_entity_t *entity, size_t *length)
 		return result;
 	}
 
+	if (header->image_length < stm32image_dev.lba_size) {
+		*length = stm32image_dev.lba_size;
+	} else {
 		*length = header->image_length;
+	}
 
-	INFO("STM32 Image size : %i\n", *length);
+	INFO("STM32 Image size : %lu\n", (unsigned long)*length);
 
 	return 0;
 }
@@ -266,11 +280,10 @@ static int check_header(boot_api_image_header_t *header, uintptr_t buffer)
 static int stm32image_partition_read(io_entity_t *entity, uintptr_t buffer,
 				     size_t length, size_t *length_read)
 {
-	int result = 0, offset, local_length = 0;
+	int result = 0;
 	uint8_t *local_buffer = (uint8_t *)buffer;
 	boot_api_image_header_t *header =
 		(boot_api_image_header_t *)first_lba_buffer;
-	uintptr_t backend_handle;
 
 	assert(entity != NULL);
 	assert(buffer != 0U);
@@ -279,8 +292,17 @@ static int stm32image_partition_read(io_entity_t *entity, uintptr_t buffer,
 	*length_read = 0U;
 
 	while (*length_read == 0U) {
+		int offset;
+		int local_length;
+		uintptr_t backend_handle;
+
 		if (header->magic != BOOT_API_IMAGE_HEADER_MAGIC_NB) {
 			/* Check for backup as image is corrupted */
+			if (current_part->bkp_offset == 0U) {
+				result = -ENOMEM;
+				break;
+			}
+
 			*stm32_img += current_part->bkp_offset;
 			if (*stm32_img >= stm32image_dev.device_size) {
 				/* End of device reached */
@@ -342,8 +364,8 @@ static int stm32image_partition_read(io_entity_t *entity, uintptr_t buffer,
 		if (result != 0) {
 			ERROR("%s: io_read (%i)\n", __func__, result);
 			*length_read = 0;
-			io_close(backend_handle);
-			break;
+			header->magic = 0;
+			continue;
 		}
 
 		result = check_header(header, buffer);
@@ -351,8 +373,6 @@ static int stm32image_partition_read(io_entity_t *entity, uintptr_t buffer,
 			ERROR("Header check failed\n");
 			*length_read = 0;
 			header->magic = 0;
-			io_close(backend_handle);
-			break;
 		}
 
 		io_close(backend_handle);

drivers/st/mmc/stm32_sdmmc2.c

 /*
- * Copyright (c) 2018, STMicroelectronics - All Rights Reserved
+ * Copyright (c) 2018-2019, STMicroelectronics - All Rights Reserved
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -17,6 +17,7 @@
 #include <common/debug.h>
 #include <drivers/delay_timer.h>
 #include <drivers/mmc.h>
+#include <drivers/st/stm32_gpio.h>
 #include <drivers/st/stm32_sdmmc2.h>
 #include <drivers/st/stm32mp1_clk.h>
 #include <drivers/st/stm32mp1_rcc.h>
@@ -470,12 +471,11 @@ static int stm32_sdmmc2_prepare(int lba, uintptr_t buf, size_t size)
 	}
 
 	/* Prepare CMD 16*/
-	mmio_write_32(base + SDMMC_DTIMER, UINT32_MAX);
+	mmio_write_32(base + SDMMC_DTIMER, 0);
 
 	mmio_write_32(base + SDMMC_DLENR, 0);
 
-	mmio_clrsetbits_32(base + SDMMC_DCTRLR,
-			   SDMMC_DCTRLR_CLEAR_MASK, SDMMC_DCTRLR_DTDIR);
+	mmio_write_32(base + SDMMC_DCTRLR, 0);
 
 	zeromem(&cmd, sizeof(struct mmc_cmd));
 
@@ -643,7 +643,7 @@ static int stm32_sdmmc2_dt_get_config(void)
 		return -FDT_ERR_NOTFOUND;
 	}
 
-	if (fdt_check_status(sdmmc_node) == 0) {
+	if (fdt_get_status(sdmmc_node) == DT_DISABLED) {
 		return -FDT_ERR_NOTFOUND;
 	}
 
@@ -667,15 +667,15 @@ static int stm32_sdmmc2_dt_get_config(void)
 	cuint++;
 	sdmmc2_params.reset_id = fdt32_to_cpu(*cuint);
 
-	if ((fdt_getprop(fdt, sdmmc_node, "st,pin-ckin", NULL)) != NULL) {
+	if ((fdt_getprop(fdt, sdmmc_node, "st,use-ckin", NULL)) != NULL) {
 		sdmmc2_params.pin_ckin = SDMMC_CLKCR_SELCLKRX_0;
 	}
 
-	if ((fdt_getprop(fdt, sdmmc_node, "st,dirpol", NULL)) != NULL) {
+	if ((fdt_getprop(fdt, sdmmc_node, "st,sig-dir", NULL)) != NULL) {
 		sdmmc2_params.dirpol = SDMMC_POWER_DIRPOL;
 	}
 
-	if ((fdt_getprop(fdt, sdmmc_node, "st,negedge", NULL)) != NULL) {
+	if ((fdt_getprop(fdt, sdmmc_node, "st,neg-edge", NULL)) != NULL) {
 		sdmmc2_params.negedge = SDMMC_CLKCR_NEGEDGE;
 	}
 

drivers/st/pmic/stm32mp1_pmic.c → drivers/st/pmic/stm32mp_pmic.c

 /*
- * Copyright (c) 2017-2018, STMicroelectronics - All Rights Reserved
+ * Copyright (c) 2017-2019, STMicroelectronics - All Rights Reserved
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -13,10 +13,10 @@
 
 #include <common/debug.h>
 #include <drivers/delay_timer.h>
+#include <drivers/st/stm32mp_pmic.h>
 #include <drivers/st/stm32_gpio.h>
 #include <drivers/st/stm32mp1_clk.h>
-#include <drivers/st/stm32mp1_pmic.h>
-#include <drivers/st/stpmu1.h>
+#include <drivers/st/stpmic1.h>
 #include <lib/mmio.h>
 #include <lib/utils_def.h>
 
@@ -27,23 +27,23 @@
 
 #define MASK_RESET_BUCK3		BIT(2)
 
-#define STPMU1_LDO12356_OUTPUT_MASK	(uint8_t)(GENMASK(6, 2))
-#define STPMU1_LDO12356_OUTPUT_SHIFT	2
-#define STPMU1_LDO3_MODE		(uint8_t)(BIT(7))
-#define STPMU1_LDO3_DDR_SEL		31U
-#define STPMU1_LDO3_1800000		(9U << STPMU1_LDO12356_OUTPUT_SHIFT)
+#define STPMIC1_LDO12356_OUTPUT_MASK	(uint8_t)(GENMASK(6, 2))
+#define STPMIC1_LDO12356_OUTPUT_SHIFT	2
+#define STPMIC1_LDO3_MODE		(uint8_t)(BIT(7))
+#define STPMIC1_LDO3_DDR_SEL		31U
+#define STPMIC1_LDO3_1800000		(9U << STPMIC1_LDO12356_OUTPUT_SHIFT)
 
-#define STPMU1_BUCK_OUTPUT_SHIFT	2
-#define STPMU1_BUCK3_1V8		(39U << STPMU1_BUCK_OUTPUT_SHIFT)
+#define STPMIC1_BUCK_OUTPUT_SHIFT	2
+#define STPMIC1_BUCK3_1V8		(39U << STPMIC1_BUCK_OUTPUT_SHIFT)
 
-#define STPMU1_DEFAULT_START_UP_DELAY_MS	1
+#define STPMIC1_DEFAULT_START_UP_DELAY_MS	1
 
 static struct i2c_handle_s i2c_handle;
 static uint32_t pmic_i2c_addr;
 
 static int dt_get_pmic_node(void *fdt)
 {
-	return fdt_node_offset_by_compatible(fdt, -1, "st,stpmu1");
+	return fdt_node_offset_by_compatible(fdt, -1, "st,stpmic1");
 }
 
 bool dt_check_pmic(void)
@@ -61,7 +61,7 @@ bool dt_check_pmic(void)
 		return false;
 	}
 
-	return fdt_check_status(node);
+	return fdt_get_status(node);
 }
 
 static int dt_pmic_i2c_config(struct dt_node_info *i2c_info)
@@ -138,16 +138,16 @@ int dt_pmic_enable_boot_on_regulators(void)
 		voltage = (uint16_t)(fdt32_to_cpu(*cuint) / 1000U);
 		node_name = fdt_get_name(fdt, regulator_node, NULL);
 
-		if (stpmu1_is_regulator_enabled(node_name) == 0U) {
+		if (stpmic1_is_regulator_enabled(node_name) == 0U) {
 			int status;
 
-			status = stpmu1_regulator_voltage_set(node_name,
+			status = stpmic1_regulator_voltage_set(node_name,
 							       voltage);
 			if (status != 0) {
 				return status;
 			}
 
-			status = stpmu1_regulator_enable(node_name);
+			status = stpmic1_regulator_enable(node_name);
 			if (status != 0) {
 				return status;
 			}
@@ -204,7 +204,7 @@ void initialize_pmic_i2c(void)
 		panic();
 	}
 
-	stpmu1_bind_i2c(&i2c_handle, (uint16_t)pmic_i2c_addr);
+	stpmic1_bind_i2c(&i2c_handle, (uint16_t)pmic_i2c_addr);
 }
 
 void initialize_pmic(void)
@@ -214,7 +214,7 @@ void initialize_pmic(void)
 
 	initialize_pmic_i2c();
 
-	status = stpmu1_register_read(VERSION_STATUS_REG, &read_val);
+	status = stpmic1_register_read(VERSION_STATUS_REG, &read_val);
 	if (status != 0) {
 		panic();
 	}
@@ -222,7 +222,7 @@ void initialize_pmic(void)
 	INFO("PMIC version = 0x%x\n", read_val);
 
 	/* Keep VDD on during the reset cycle */
-	status = stpmu1_register_update(MASK_RESET_BUCK_REG,
+	status = stpmic1_register_update(MASK_RESET_BUCK_REG,
 					MASK_RESET_BUCK3,
 					MASK_RESET_BUCK3);
 	if (status != 0) {
@@ -239,45 +239,46 @@ int pmic_ddr_power_init(enum ddr_type ddr_type)
 	switch (ddr_type) {
 	case STM32MP_DDR3:
 		/* Set LDO3 to sync mode */
-		status = stpmu1_register_read(LDO3_CONTROL_REG, &read_val);
+		status = stpmic1_register_read(LDO3_CONTROL_REG, &read_val);
 		if (status != 0) {
 			return status;
 		}
 
-		read_val &= ~STPMU1_LDO3_MODE;
-		read_val &= ~STPMU1_LDO12356_OUTPUT_MASK;
-		read_val |= STPMU1_LDO3_DDR_SEL << STPMU1_LDO12356_OUTPUT_SHIFT;
+		read_val &= ~STPMIC1_LDO3_MODE;
+		read_val &= ~STPMIC1_LDO12356_OUTPUT_MASK;
+		read_val |= STPMIC1_LDO3_DDR_SEL <<
+			    STPMIC1_LDO12356_OUTPUT_SHIFT;
 
-		status = stpmu1_register_write(LDO3_CONTROL_REG, read_val);
+		status = stpmic1_register_write(LDO3_CONTROL_REG, read_val);
 		if (status != 0) {
 			return status;
 		}
 
-		status = stpmu1_regulator_voltage_set("buck2", 1350);
+		status = stpmic1_regulator_voltage_set("buck2", 1350);
 		if (status != 0) {
 			return status;
 		}
 
-		status = stpmu1_regulator_enable("buck2");
+		status = stpmic1_regulator_enable("buck2");
 		if (status != 0) {
 			return status;
 		}
 
-		mdelay(STPMU1_DEFAULT_START_UP_DELAY_MS);
+		mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS);
 
-		status = stpmu1_regulator_enable("vref_ddr");
+		status = stpmic1_regulator_enable("vref_ddr");
 		if (status != 0) {
 			return status;
 		}
 
-		mdelay(STPMU1_DEFAULT_START_UP_DELAY_MS);
+		mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS);
 
-		status = stpmu1_regulator_enable("ldo3");
+		status = stpmic1_regulator_enable("ldo3");
 		if (status != 0) {
 			return status;
 		}
 
-		mdelay(STPMU1_DEFAULT_START_UP_DELAY_MS);
+		mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS);
 		break;
 
 	case STM32MP_LPDDR2:
@@ -286,57 +287,57 @@ int pmic_ddr_power_init(enum ddr_type ddr_type)
 		 * Set LDO3 to bypass mode if BUCK3 = 1.8V
 		 * Set LDO3 to normal mode if BUCK3 != 1.8V
 		 */
-		status = stpmu1_register_read(BUCK3_CONTROL_REG, &read_val);
+		status = stpmic1_register_read(BUCK3_CONTROL_REG, &read_val);
 		if (status != 0) {
 			return status;
 		}
 
-		if ((read_val & STPMU1_BUCK3_1V8) == STPMU1_BUCK3_1V8) {
+		if ((read_val & STPMIC1_BUCK3_1V8) == STPMIC1_BUCK3_1V8) {
 			buck3_at_1v8 = true;
 		}
 
-		status = stpmu1_register_read(LDO3_CONTROL_REG, &read_val);
+		status = stpmic1_register_read(LDO3_CONTROL_REG, &read_val);
 		if (status != 0) {
 			return status;
 		}
 
-		read_val &= ~STPMU1_LDO3_MODE;
-		read_val &= ~STPMU1_LDO12356_OUTPUT_MASK;
-		read_val |= STPMU1_LDO3_1800000;
+		read_val &= ~STPMIC1_LDO3_MODE;
+		read_val &= ~STPMIC1_LDO12356_OUTPUT_MASK;
+		read_val |= STPMIC1_LDO3_1800000;
 		if (buck3_at_1v8) {
-			read_val |= STPMU1_LDO3_MODE;
+			read_val |= STPMIC1_LDO3_MODE;
 		}
 
-		status = stpmu1_register_write(LDO3_CONTROL_REG, read_val);
+		status = stpmic1_register_write(LDO3_CONTROL_REG, read_val);
 		if (status != 0) {
 			return status;
 		}
 
-		status = stpmu1_regulator_voltage_set("buck2", 1200);
+		status = stpmic1_regulator_voltage_set("buck2", 1200);
 		if (status != 0) {
 			return status;
 		}
 
-		status = stpmu1_regulator_enable("ldo3");
+		status = stpmic1_regulator_enable("ldo3");
 		if (status != 0) {
 			return status;
 		}
 
-		mdelay(STPMU1_DEFAULT_START_UP_DELAY_MS);
+		mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS);
 
-		status = stpmu1_regulator_enable("buck2");
+		status = stpmic1_regulator_enable("buck2");
 		if (status != 0) {
 			return status;
 		}
 
-		mdelay(STPMU1_DEFAULT_START_UP_DELAY_MS);
+		mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS);
 
-		status = stpmu1_regulator_enable("vref_ddr");
+		status = stpmic1_regulator_enable("vref_ddr");
 		if (status != 0) {
 			return status;
 		}
 
-		mdelay(STPMU1_DEFAULT_START_UP_DELAY_MS);
+		mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS);
 		break;
 
 	default:

drivers/st/pmic/stpmu1.c → drivers/st/pmic/stpmic1.c

 /*
- * Copyright (c) 2016-2018, STMicroelectronics - All Rights Reserved
+ * Copyright (c) 2016-2019, STMicroelectronics - All Rights Reserved
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -7,7 +7,7 @@
 #include <string.h>
 
 #include <common/debug.h>
-#include <drivers/st/stpmu1.h>
+#include <drivers/st/stpmic1.h>
 #include <plat/common/platform.h>
 
 struct regul_struct {
@@ -16,18 +16,22 @@ struct regul_struct {
 	uint8_t voltage_table_size;
 	uint8_t control_reg;
 	uint8_t low_power_reg;
+	uint8_t pull_down_reg;
+	uint8_t pull_down;
+	uint8_t mask_reset_reg;
+	uint8_t mask_reset;
 };
 
-static struct i2c_handle_s *stpmu_i2c_handle;
-static uint16_t stpmu_i2c_addr;
+static struct i2c_handle_s *pmic_i2c_handle;
+static uint16_t pmic_i2c_addr;
 
 /* Voltage tables in mV */
 static const uint16_t buck1_voltage_table[] = {
-	600,
-	625,
-	650,
-	675,
-	700,
+	725,
+	725,
+	725,
+	725,
+	725,
 	725,
 	750,
 	775,
@@ -54,7 +58,39 @@ static const uint16_t buck1_voltage_table[] = {
 	1300,
 	1325,
 	1350,
-	1350,
+	1375,
+	1400,
+	1425,
+	1450,
+	1475,
+	1500,
+	1500,
+	1500,
+	1500,
+	1500,
+	1500,
+	1500,
+	1500,
+	1500,
+	1500,
+	1500,
+	1500,
+	1500,
+	1500,
+	1500,
+	1500,
+	1500,
+	1500,
+	1500,
+	1500,
+	1500,
+	1500,
+	1500,
+	1500,
+	1500,
+	1500,
+	1500,
+	1500,
 };
 
 static const uint16_t buck2_voltage_table[] = {
@@ -308,6 +344,7 @@ static const uint16_t ldo3_voltage_table[] = {
 	3300,
 	3300,
 	3300,
+	500,
 	0xFFFF, /* VREFDDR */
 };
 
@@ -389,6 +426,10 @@ static const struct regul_struct regulators_table[] = {
 		.voltage_table_size = ARRAY_SIZE(buck1_voltage_table),
 		.control_reg	= BUCK1_CONTROL_REG,
 		.low_power_reg	= BUCK1_PWRCTRL_REG,
+		.pull_down_reg	= BUCK_PULL_DOWN_REG,
+		.pull_down	= BUCK1_PULL_DOWN_SHIFT,
+		.mask_reset_reg	= MASK_RESET_BUCK_REG,
+		.mask_reset	= BUCK1_MASK_RESET,
 	},
 	{
 		.dt_node_name	= "buck2",
@@ -396,6 +437,10 @@ static const struct regul_struct regulators_table[] = {
 		.voltage_table_size = ARRAY_SIZE(buck2_voltage_table),
 		.control_reg	= BUCK2_CONTROL_REG,
 		.low_power_reg	= BUCK2_PWRCTRL_REG,
+		.pull_down_reg	= BUCK_PULL_DOWN_REG,
+		.pull_down	= BUCK2_PULL_DOWN_SHIFT,
+		.mask_reset_reg	= MASK_RESET_BUCK_REG,
+		.mask_reset	= BUCK2_MASK_RESET,
 	},
 	{
 		.dt_node_name	= "buck3",
@@ -403,6 +448,10 @@ static const struct regul_struct regulators_table[] = {
 		.voltage_table_size = ARRAY_SIZE(buck3_voltage_table),
 		.control_reg	= BUCK3_CONTROL_REG,
 		.low_power_reg	= BUCK3_PWRCTRL_REG,
+		.pull_down_reg	= BUCK_PULL_DOWN_REG,
+		.pull_down	= BUCK3_PULL_DOWN_SHIFT,
+		.mask_reset_reg	= MASK_RESET_BUCK_REG,
+		.mask_reset	= BUCK3_MASK_RESET,
 	},
 	{
 		.dt_node_name	= "buck4",
@@ -410,6 +459,10 @@ static const struct regul_struct regulators_table[] = {
 		.voltage_table_size = ARRAY_SIZE(buck4_voltage_table),
 		.control_reg	= BUCK4_CONTROL_REG,
 		.low_power_reg	= BUCK4_PWRCTRL_REG,
+		.pull_down_reg	= BUCK_PULL_DOWN_REG,
+		.pull_down	= BUCK4_PULL_DOWN_SHIFT,
+		.mask_reset_reg	= MASK_RESET_BUCK_REG,
+		.mask_reset	= BUCK4_MASK_RESET,
 	},
 	{
 		.dt_node_name	= "ldo1",
@@ -417,6 +470,8 @@ static const struct regul_struct regulators_table[] = {
 		.voltage_table_size = ARRAY_SIZE(ldo1_voltage_table),
 		.control_reg	= LDO1_CONTROL_REG,
 		.low_power_reg	= LDO1_PWRCTRL_REG,
+		.mask_reset_reg	= MASK_RESET_LDO_REG,
+		.mask_reset	= LDO1_MASK_RESET,
 	},
 	{
 		.dt_node_name	= "ldo2",
@@ -424,6 +479,8 @@ static const struct regul_struct regulators_table[] = {
 		.voltage_table_size = ARRAY_SIZE(ldo2_voltage_table),
 		.control_reg	= LDO2_CONTROL_REG,
 		.low_power_reg	= LDO2_PWRCTRL_REG,
+		.mask_reset_reg	= MASK_RESET_LDO_REG,
+		.mask_reset	= LDO2_MASK_RESET,
 	},
 	{
 		.dt_node_name	= "ldo3",
@@ -431,6 +488,8 @@ static const struct regul_struct regulators_table[] = {
 		.voltage_table_size = ARRAY_SIZE(ldo3_voltage_table),
 		.control_reg	= LDO3_CONTROL_REG,
 		.low_power_reg	= LDO3_PWRCTRL_REG,
+		.mask_reset_reg	= MASK_RESET_LDO_REG,
+		.mask_reset	= LDO3_MASK_RESET,
 	},
 	{
 		.dt_node_name	= "ldo4",
@@ -438,6 +497,8 @@ static const struct regul_struct regulators_table[] = {
 		.voltage_table_size = ARRAY_SIZE(ldo4_voltage_table),
 		.control_reg	= LDO4_CONTROL_REG,
 		.low_power_reg	= LDO4_PWRCTRL_REG,
+		.mask_reset_reg	= MASK_RESET_LDO_REG,
+		.mask_reset	= LDO4_MASK_RESET,
 	},
 	{
 		.dt_node_name	= "ldo5",
@@ -445,6 +506,8 @@ static const struct regul_struct regulators_table[] = {
 		.voltage_table_size = ARRAY_SIZE(ldo5_voltage_table),
 		.control_reg	= LDO5_CONTROL_REG,
 		.low_power_reg	= LDO5_PWRCTRL_REG,
+		.mask_reset_reg	= MASK_RESET_LDO_REG,
+		.mask_reset	= LDO5_MASK_RESET,
 	},
 	{
 		.dt_node_name	= "ldo6",
@@ -452,6 +515,8 @@ static const struct regul_struct regulators_table[] = {
 		.voltage_table_size = ARRAY_SIZE(ldo6_voltage_table),
 		.control_reg	= LDO6_CONTROL_REG,
 		.low_power_reg	= LDO6_PWRCTRL_REG,
+		.mask_reset_reg	= MASK_RESET_LDO_REG,
+		.mask_reset	= LDO6_MASK_RESET,
 	},
 	{
 		.dt_node_name	= "vref_ddr",
@@ -459,12 +524,14 @@ static const struct regul_struct regulators_table[] = {
 		.voltage_table_size = ARRAY_SIZE(vref_ddr_voltage_table),
 		.control_reg	= VREF_DDR_CONTROL_REG,
 		.low_power_reg	= VREF_DDR_PWRCTRL_REG,
+		.mask_reset_reg	= MASK_RESET_LDO_REG,
+		.mask_reset	= VREF_DDR_MASK_RESET,
 	},
 };
 
 #define MAX_REGUL	ARRAY_SIZE(regulators_table)
 
-static const struct regul_struct *stpmu1_get_regulator_data(const char *name)
+static const struct regul_struct *get_regulator_data(const char *name)
 {
 	uint8_t i;
 
@@ -480,10 +547,9 @@ static const struct regul_struct *stpmu1_get_regulator_data(const char *name)
 	return NULL;
 }
 
-static uint8_t stpmu1_voltage_find_index(const char *name,
-					 uint16_t millivolts)
+static uint8_t voltage_to_index(const char *name, uint16_t millivolts)
 {
-	const struct regul_struct *regul = stpmu1_get_regulator_data(name);
+	const struct regul_struct *regul = get_regulator_data(name);
 	uint8_t i;
 
 	for (i = 0 ; i < regul->voltage_table_size ; i++) {
@@ -498,62 +564,132 @@ static uint8_t stpmu1_voltage_find_index(const char *name,
 	return 0;
 }
 
-int stpmu1_switch_off(void)
+int stpmic1_powerctrl_on(void)
+{
+	return stpmic1_register_update(MAIN_CONTROL_REG, PWRCTRL_PIN_VALID,
+				       PWRCTRL_PIN_VALID);
+}
+
+int stpmic1_switch_off(void)
 {
-	return stpmu1_register_update(MAIN_CONTROL_REG, 1,
+	return stpmic1_register_update(MAIN_CONTROL_REG, 1,
 				       SOFTWARE_SWITCH_OFF_ENABLED);
 }
 
-int stpmu1_regulator_enable(const char *name)
+int stpmic1_regulator_enable(const char *name)
 {
-	const struct regul_struct *regul = stpmu1_get_regulator_data(name);
+	const struct regul_struct *regul = get_regulator_data(name);
 
-	return stpmu1_register_update(regul->control_reg, BIT(0), BIT(0));
+	return stpmic1_register_update(regul->control_reg, BIT(0), BIT(0));
 }
 
-int stpmu1_regulator_disable(const char *name)
+int stpmic1_regulator_disable(const char *name)
 {
-	const struct regul_struct *regul = stpmu1_get_regulator_data(name);
+	const struct regul_struct *regul = get_regulator_data(name);
 
-	return stpmu1_register_update(regul->control_reg, 0, BIT(0));
+	return stpmic1_register_update(regul->control_reg, 0, BIT(0));
 }
 
-uint8_t stpmu1_is_regulator_enabled(const char *name)
+uint8_t stpmic1_is_regulator_enabled(const char *name)
 {
 	uint8_t val;
-	const struct regul_struct *regul = stpmu1_get_regulator_data(name);
+	const struct regul_struct *regul = get_regulator_data(name);
 
-	if (stpmu1_register_read(regul->control_reg, &val) != 0) {
+	if (stpmic1_register_read(regul->control_reg, &val) != 0) {
 		panic();
 	}
 
 	return (val & 0x1U);
 }
 
-int stpmu1_regulator_voltage_set(const char *name, uint16_t millivolts)
+int stpmic1_regulator_voltage_set(const char *name, uint16_t millivolts)
 {
-	uint8_t voltage_index = stpmu1_voltage_find_index(name, millivolts);
-	const struct regul_struct *regul = stpmu1_get_regulator_data(name);
+	uint8_t voltage_index = voltage_to_index(name, millivolts);
+	const struct regul_struct *regul = get_regulator_data(name);
+	uint8_t mask;
+
+	/* Voltage can be set for buck<N> or ldo<N> (except ldo4) regulators */
+	if (strncmp(name, "buck", 4) == 0) {
+		mask = BUCK_VOLTAGE_MASK;
+	} else if ((strncmp(name, "ldo", 3) == 0) &&
+		   (strncmp(name, "ldo4", 4) != 0)) {
+		mask = LDO_VOLTAGE_MASK;
+	} else {
+		return 0;
+	}
+
+	return stpmic1_register_update(regul->control_reg,
+				       voltage_index << LDO_BUCK_VOLTAGE_SHIFT,
+				       mask);
+}
+
+int stpmic1_regulator_pull_down_set(const char *name)
+{
+	const struct regul_struct *regul = get_regulator_data(name);
+
+	if (regul->pull_down_reg != 0) {
+		return stpmic1_register_update(regul->pull_down_reg,
+					       BIT(regul->pull_down),
+					       LDO_BUCK_PULL_DOWN_MASK <<
+					       regul->pull_down);
+	}
+
+	return 0;
+}
+
+int stpmic1_regulator_mask_reset_set(const char *name)
+{
+	const struct regul_struct *regul = get_regulator_data(name);
+
+	return stpmic1_register_update(regul->mask_reset_reg,
+				       BIT(regul->mask_reset),
+				       LDO_BUCK_RESET_MASK <<
+				       regul->mask_reset);
+}
+
+int stpmic1_regulator_voltage_get(const char *name)
+{
+	const struct regul_struct *regul = get_regulator_data(name);
+	uint8_t value;
+	uint8_t mask;
+
+	/* Voltage can be set for buck<N> or ldo<N> (except ldo4) regulators */
+	if (strncmp(name, "buck", 4) == 0) {
+		mask = BUCK_VOLTAGE_MASK;
+	} else if ((strncmp(name, "ldo", 3) == 0) &&
+		   (strncmp(name, "ldo4", 4) != 0)) {
+		mask = LDO_VOLTAGE_MASK;
+	} else {
+		return 0;
+	}
 
-	return stpmu1_register_update(regul->control_reg, voltage_index << 2,
-				      0xFC);
+	if (stpmic1_register_read(regul->control_reg, &value))
+		return -1;
+
+	value = (value & mask) >> LDO_BUCK_VOLTAGE_SHIFT;
+
+	if (value > regul->voltage_table_size)
+		return -1;
+
+	return (int)regul->voltage_table[value];
 }
 
-int stpmu1_register_read(uint8_t register_id,  uint8_t *value)
+int stpmic1_register_read(uint8_t register_id,  uint8_t *value)
 {
-	return stm32_i2c_mem_read(stpmu_i2c_handle, stpmu_i2c_addr,
+	return stm32_i2c_mem_read(pmic_i2c_handle, pmic_i2c_addr,
 				  (uint16_t)register_id, I2C_MEMADD_SIZE_8BIT,
 				  value, 1, 100000);
 }
 
-int stpmu1_register_write(uint8_t register_id, uint8_t value)
+int stpmic1_register_write(uint8_t register_id, uint8_t value)
 {
 	int status;
 
-	status = stm32_i2c_mem_write(stpmu_i2c_handle, stpmu_i2c_addr,
+	status = stm32_i2c_mem_write(pmic_i2c_handle, pmic_i2c_addr,
 				     (uint16_t)register_id,
 				     I2C_MEMADD_SIZE_8BIT, &value, 1, 100000);
 
+#if ENABLE_ASSERTIONS
 	if (status != 0) {
 		return status;
 	}
@@ -561,7 +697,7 @@ int stpmu1_register_write(uint8_t register_id, uint8_t value)
 	if ((register_id != WATCHDOG_CONTROL_REG) && (register_id <= 0x40U)) {
 		uint8_t readval;
 
-		status = stpmu1_register_read(register_id, &readval);
+		status = stpmic1_register_read(register_id, &readval);
 		if (status != 0) {
 			return status;
 		}
@@ -570,32 +706,57 @@ int stpmu1_register_write(uint8_t register_id, uint8_t value)
 			return -1;
 		}
 	}
+#endif
 
-	return 0;
+	return status;
 }
 
-int stpmu1_register_update(uint8_t register_id, uint8_t value, uint8_t mask)
+int stpmic1_register_update(uint8_t register_id, uint8_t value, uint8_t mask)
 {
 	int status;
 	uint8_t val;
 
-	status = stpmu1_register_read(register_id, &val);
+	status = stpmic1_register_read(register_id, &val);
 	if (status != 0) {
 		return status;
 	}
 
-	/* Clear bits to update */
-	val &= ~mask;
+	val = (val & ~mask) | (value & mask);
 
-	/* Update appropriate bits*/
-	val |= (value & mask);
+	return stpmic1_register_write(register_id, val);
+}
 
-	/* Send new value on I2C Bus */
-	return stpmu1_register_write(register_id, val);
+void stpmic1_bind_i2c(struct i2c_handle_s *i2c_handle, uint16_t i2c_addr)
+{
+	pmic_i2c_handle = i2c_handle;
+	pmic_i2c_addr = i2c_addr;
 }
 
-void stpmu1_bind_i2c(struct i2c_handle_s *i2c_handle, uint16_t i2c_addr)
+void stpmic1_dump_regulators(void)
 {
-	stpmu_i2c_handle = i2c_handle;
-	stpmu_i2c_addr = i2c_addr;
+	uint32_t i;
+
+	for (i = 0U; i < MAX_REGUL; i++) {
+		const char *name __unused = regulators_table[i].dt_node_name;
+
+		VERBOSE("PMIC regul %s: %sable, %dmV",
+			name,
+			stpmic1_is_regulator_enabled(name) ? "en" : "dis",
+			stpmic1_regulator_voltage_get(name));
+	}
+}
+
+int stpmic1_get_version(unsigned long *version)
+{
+	int rc;
+	uint8_t read_val;
+
+	rc = stpmic1_register_read(VERSION_STATUS_REG, &read_val);
+	if (rc) {
+		return -1;
+	}
+
+	*version = (unsigned long)read_val;
+
+	return 0;
 }

fdts/stm32mp15-ddr.dtsi

@@ -5,7 +5,7 @@
 
 / {
 	soc {
-		ddr: ddr@0x5A003000{
+		ddr: ddr@5A003000{
 
 			compatible = "st,stm32mp1-ddr";
 

fdts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi

@@ -3,7 +3,7 @@
  * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
  */
 
-/* STM32MP157C ED1 and ED2 BOARD configuration
+/* STM32MP157C ED1 BOARD configuration
  * 2x DDR3L 4Gb each, 16-bit, 533MHz, Single Die Package in flyby topology.
  * Reference used NT5CC256M16DP-DI from NANYA
  *
@@ -15,10 +15,11 @@
  * timing mode	optimized
  * Scheduling/QoS options : type = 2
  * address mapping : RBC
+ * Tc > + 85C : N
  */
 
-#define DDR_MEM_NAME "DDR3-1066 bin G 2x4Gb 533MHz v1.39"
-#define DDR_MEM_SPEED 533
+#define DDR_MEM_NAME "DDR3-1066/888 bin G 2x4Gb 533MHz v1.41"
+#define DDR_MEM_SPEED 533000
 #define DDR_MEM_SIZE 0x40000000
 
 #define DDR_MSTR 0x00040401
@@ -62,7 +63,7 @@
 #define DDR_ADDRMAP11 0x00000000
 #define DDR_ODTCFG 0x06000600
 #define DDR_ODTMAP 0x00000001
-#define DDR_SCHED 0x00001201
+#define DDR_SCHED 0x00000C01
 #define DDR_SCHED1 0x00000000
 #define DDR_PERFHPR1 0x01000001
 #define DDR_PERFLPR1 0x08000200
@@ -74,15 +75,15 @@
 #define DDR_PCCFG 0x00000010
 #define DDR_PCFGR_0 0x00010000
 #define DDR_PCFGW_0 0x00000000
-#define DDR_PCFGQOS0_0 0x02100B03
+#define DDR_PCFGQOS0_0 0x02100C03
 #define DDR_PCFGQOS1_0 0x00800100
-#define DDR_PCFGWQOS0_0 0x01100B03
+#define DDR_PCFGWQOS0_0 0x01100C03
 #define DDR_PCFGWQOS1_0 0x01000200
 #define DDR_PCFGR_1 0x00010000
 #define DDR_PCFGW_1 0x00000000
-#define DDR_PCFGQOS0_1 0x02100B03
-#define DDR_PCFGQOS1_1 0x00800000
-#define DDR_PCFGWQOS0_1 0x01100B03
+#define DDR_PCFGQOS0_1 0x02100C03
+#define DDR_PCFGQOS1_1 0x00800040
+#define DDR_PCFGWQOS0_1 0x01100C03
 #define DDR_PCFGWQOS1_1 0x01000200
 #define DDR_PGCR 0x01442E02
 #define DDR_PTR0 0x0022AA5B

fdts/stm32mp157-pinctrl.dtsi

@@ -3,13 +3,14 @@
  * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
  * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
  */
-
 #include <dt-bindings/pinctrl/stm32-pinfunc.h>
+
 / {
 	soc {
-		pinctrl: pin-controller {
+		pinctrl: pin-controller@50002000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
+			compatible = "st,stm32mp157-pinctrl";
 			ranges = <0 0x50002000 0xa400>;
 			pins-are-numbered;
 
@@ -134,54 +135,76 @@
 				status = "disabled";
 			};
 
-			uart4_pins_a: uart4@0 {
+			qspi_bk1_pins_a: qspi-bk1-0 {
 				pins1 {
-					pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
+					pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */
+						 <STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */
+						 <STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */
+						 <STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */
 					bias-disable;
 					drive-push-pull;
-					slew-rate = <0>;
+					slew-rate = <1>;
 				};
 				pins2 {
-					pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
-					bias-disable;
+					pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */
+					bias-pull-up;
+					drive-push-pull;
+					slew-rate = <1>;
 				};
 			};
 
-			usart3_pins_a: usart3@0 {
+			qspi_bk2_pins_a: qspi-bk2-0 {
 				pins1 {
-					pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
-						 <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
+					pinmux = <STM32_PINMUX('H', 2, AF9)>, /* QSPI_BK2_IO0 */
+						 <STM32_PINMUX('H', 3, AF9)>, /* QSPI_BK2_IO1 */
+						 <STM32_PINMUX('G', 10, AF11)>, /* QSPI_BK2_IO2 */
+						 <STM32_PINMUX('G', 7, AF11)>; /* QSPI_BK2_IO3 */
 					bias-disable;
 					drive-push-pull;
-					slew-rate = <0>;
+					slew-rate = <1>;
 				};
 				pins2 {
-					pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
-						 <STM32_PINMUX('I', 10, AF8)>; /* USART3_CTS_NSS */
-					bias-disable;
+					pinmux = <STM32_PINMUX('C', 0, AF10)>; /* QSPI_BK2_NCS */
+					bias-pull-up;
+					drive-push-pull;
+					slew-rate = <1>;
 				};
 			};
 
-			sdmmc1_b4_pins_a: sdmmc1-b4@0 {
+			qspi_clk_pins_a: qspi-clk-0 {
 				pins {
+					pinmux = <STM32_PINMUX('F', 10, AF9)>; /* QSPI_CLK */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <3>;
+				};
+			};
+
+			sdmmc1_b4_pins_a: sdmmc1-b4-0 {
+				pins1 {
 					pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
 						 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
 						 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
 						 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
-						 <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1_CK */
 						 <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
-					slew-rate = <3>;
+					slew-rate = <1>;
+					drive-push-pull;
+					bias-disable;
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
+					slew-rate = <2>;
 					drive-push-pull;
 					bias-disable;
 				};
 			};
 
-			sdmmc1_dir_pins_a: sdmmc1-dir@0 {
+			sdmmc1_dir_pins_a: sdmmc1-dir-0 {
 				pins1 {
 					pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */
 						 <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
 						 <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */
-					slew-rate = <3>;
+					slew-rate = <1>;
 					drive-push-pull;
 					bias-pull-up;
 				};
@@ -191,36 +214,85 @@
 				};
 			};
 
-			sdmmc2_b4_pins_a: sdmmc2-b4@0 {
-				pins {
+			sdmmc1_dir_pins_b: sdmmc1-dir-1 {
+				pins1 {
+					pinmux = <STM32_PINMUX('E', 12, AF8)>, /* SDMMC1_D0DIR */
+						 <STM32_PINMUX('E', 14, AF11)>, /* SDMMC1_D123DIR */
+						 <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */
+					slew-rate = <3>;
+					drive-push-pull;
+					bias-pull-up;
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */
+					bias-pull-up;
+				};
+			};
+
+			sdmmc2_b4_pins_a: sdmmc2-b4-0 {
+				pins1 {
 					pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
 						 <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
 						 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
 						 <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
-						 <STM32_PINMUX('E', 3, AF9)>, /* SDMMC2_CK */
 						 <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
-					slew-rate = <3>;
+					slew-rate = <1>;
+					drive-push-pull;
+					bias-pull-up;
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
+					slew-rate = <2>;
 					drive-push-pull;
 					bias-pull-up;
 				};
 			};
 
-			sdmmc2_d47_pins_a: sdmmc2-d47@0 {
+			sdmmc2_d47_pins_a: sdmmc2-d47-0 {
 				pins {
 					pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
 						 <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
 						 <STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */
 						 <STM32_PINMUX('D', 3, AF9)>; /* SDMMC2_D7 */
-					slew-rate = <3>;
+					slew-rate = <1>;
 					drive-push-pull;
 					bias-pull-up;
 				};
 			};
+
+			uart4_pins_a: uart4-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <0>;
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+					bias-disable;
+				};
+			};
+
+			usart3_pins_a: usart3-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
+						 <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <0>;
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
+						 <STM32_PINMUX('I', 10, AF8)>; /* USART3_CTS_NSS */
+					bias-disable;
+				};
+			};
 		};
 
-		pinctrl_z: pin-controller-z {
+		pinctrl_z: pin-controller-z@54004000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
+			compatible = "st,stm32mp157-z-pinctrl";
 			ranges = <0 0x54004000 0x400>;
 			pins-are-numbered;
 
@@ -236,7 +308,7 @@
 				status = "disabled";
 			};
 
-			i2c4_pins_a: i2c4@0 {
+			i2c4_pins_a: i2c4-0 {
 				pins {
 					pinmux = <STM32_PINMUX('Z', 4, AF6)>, /* I2C4_SCL */
 						 <STM32_PINMUX('Z', 5, AF6)>; /* I2C4_SDA */

fdts/stm32mp157c-ed1.dts

@@ -3,22 +3,28 @@
  * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
  * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
  */
-
 /dts-v1/;
 
 #include "stm32mp157c.dtsi"
 #include "stm32mp157caa-pinctrl.dtsi"
 
 / {
-	model = "STMicroelectronics STM32MP157C-ED1 pmic eval daughter";
+	model = "STMicroelectronics STM32MP157C eval daughter";
 	compatible = "st,stm32mp157c-ed1", "st,stm32mp157";
 
 	chosen {
-		bootargs = "earlyprintk console=ttyS3,115200 root=/dev/ram";
-		stdout-path = "serial3:115200n8";
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart4;
 	};
 };
 
+&clk_hse {
+	st,digbypass;
+};
+
 &i2c4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c4_pins_a>;
@@ -26,37 +32,88 @@
 	i2c-scl-falling-time-ns = <20>;
 	status = "okay";
 
-	pmic: stpmu1@33 {
-		compatible = "st,stpmu1";
+	pmic: stpmic@33 {
+		compatible = "st,stpmic1";
 		reg = <0x33>;
+		interrupts-extended = <&exti_pwr 55 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
 		status = "okay";
 
-		st,main_control_register = <0x04>;
-		st,vin_control_register = <0xc0>;
-		st,usb_control_register = <0x30>;
+		st,main-control-register = <0x04>;
+		st,vin-control-register = <0xc0>;
+		st,usb-control-register = <0x30>;
 
 		regulators {
-			compatible = "st,stpmu1-regulators";
+			compatible = "st,stpmic1-regulators";
+
+			ldo1-supply = <&v3v3>;
+			ldo2-supply = <&v3v3>;
+			ldo3-supply = <&vdd_ddr>;
+			ldo5-supply = <&v3v3>;
+			ldo6-supply = <&v3v3>;
+
+			vddcore: buck1 {
+				regulator-name = "vddcore";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd_ddr: buck2 {
+				regulator-name = "vdd_ddr";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd: buck3 {
+				regulator-name = "vdd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				st,mask-reset;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
 
 			v3v3: buck4 {
 				regulator-name = "v3v3";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
+				regulator-always-on;
 				regulator-over-current-protection;
-				regulator-initial-mode = <8>;
+				regulator-initial-mode = <0>;
+			};
 
-				regulator-state-standby {
-					regulator-suspend-microvolt = <3300000>;
-					regulator-unchanged-in-suspend;
-					regulator-mode = <8>;
+			vdda: ldo1 {
+				regulator-name = "vdda";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
 			};
-				regulator-state-mem {
-					regulator-off-in-suspend;
+
+			v2v8: ldo2 {
+				regulator-name = "v2v8";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
 			};
-				regulator-state-disk {
-					regulator-off-in-suspend;
+
+			vtt_ddr: ldo3 {
+				regulator-name = "vtt_ddr";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <750000>;
+				regulator-always-on;
+				regulator-over-current-protection;
 			};
+
+			vdd_usb: ldo4 {
+				regulator-name = "vdd_usb";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
 			};
 
 			vdd_sd: ldo5 {
@@ -64,24 +121,24 @@
 				regulator-min-microvolt = <2900000>;
 				regulator-max-microvolt = <2900000>;
 				regulator-boot-on;
-
-				regulator-state-standby {
-					regulator-suspend-microvolt = <2900000>;
-					regulator-unchanged-in-suspend;
-				};
-				regulator-state-mem {
-					regulator-off-in-suspend;
 			};
-				regulator-state-disk {
-					regulator-off-in-suspend;
+
+			v1v8: ldo6 {
+				regulator-name = "v1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
 			};
+
+			vref_ddr: vref_ddr {
+				regulator-name = "vref_ddr";
+				regulator-always-on;
+				regulator-over-current-protection;
 			};
 		};
 	};
 };
 
 &iwdg2 {
-	instance = <2>;
 	timeout-sec = <32>;
 	status = "okay";
 };
@@ -90,14 +147,19 @@
 	status = "okay";
 };
 
+&rtc {
+	status = "okay";
+};
+
 &sdmmc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
 	broken-cd;
-	st,dirpol;
-	st,negedge;
-	st,pin-ckin;
+	st,sig-dir;
+	st,neg-edge;
+	st,use-ckin;
 	bus-width = <4>;
+	vmmc-supply = <&vdd_sd>;
 	sd-uhs-sdr12;
 	sd-uhs-sdr25;
 	sd-uhs-sdr50;
@@ -112,16 +174,17 @@
 	non-removable;
 	no-sd;
 	no-sdio;
-	st,dirpol;
-	st,negedge;
+	st,neg-edge;
 	bus-width = <8>;
+	vmmc-supply = <&v3v3>;
+	vqmmc-supply = <&v3v3>;
+	mmc-ddr-3_3v;
 	status = "okay";
 };
 
 &uart4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart4_pins_a>;
-	resets = <&rcc UART4_R>;
 	status = "okay";
 };
 
@@ -157,6 +220,7 @@
 
 /* CLOCK init */
 &rcc {
+	secure-status = "disabled";
 	st,clksrc = <
 		CLK_MPU_PLL1P
 		CLK_AXI_PLL2P
@@ -186,7 +250,7 @@
 		CLK_FMC_ACLK
 		CLK_QSPI_ACLK
 		CLK_ETH_DISABLED
-		CLK_SDMMC12_PLL3R
+		CLK_SDMMC12_PLL4P
 		CLK_DSI_DSIPLL
 		CLK_STGEN_HSE
 		CLK_USBPHY_HSE
@@ -195,7 +259,7 @@
 		CLK_SPI45_HSI
 		CLK_SPI6_HSI
 		CLK_I2C46_HSI
-		CLK_SDMMC3_PLL3R
+		CLK_SDMMC3_PLL4P
 		CLK_USBO_USBPHY
 		CLK_ADC_CKPER
 		CLK_CEC_LSE
@@ -206,17 +270,17 @@
 		CLK_UART35_HSI
 		CLK_UART6_HSI
 		CLK_UART78_HSI
-		CLK_SPDIF_PLL3Q
+		CLK_SPDIF_PLL4P
 		CLK_FDCAN_PLL4Q
 		CLK_SAI1_PLL3Q
 		CLK_SAI2_PLL3Q
 		CLK_SAI3_PLL3Q
 		CLK_SAI4_PLL3Q
-		CLK_RNG1_CSI
-		CLK_RNG2_CSI
+		CLK_RNG1_LSI
+		CLK_RNG2_LSI
 		CLK_LPTIM1_PCLK1
 		CLK_LPTIM23_PCLK3
-		CLK_LPTIM45_PCLK3
+		CLK_LPTIM45_LSE
 	>;
 
 	/* VCO = 1300.0 MHz => P = 650 (CPU) */
@@ -231,15 +295,15 @@
 		frac = < 0x1400 >;
 	};
 
-	/* VCO = 786.4 MHz => P = 197, Q = 49, R = 98 */
+	/* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */
 	pll3: st,pll@2 {
-		cfg = < 2 97 3 15 7 PQR(1,1,1) >;
-		frac = < 0x9ba >;
+		cfg = < 1 33 1 16 36 PQR(1,1,1) >;
+		frac = < 0x1a04 >;
 	};
 
-	/* VCO = 508.0 MHz => P = 56, Q = 56, R = 56 */
+	/* VCO = 594.0 MHz => P = 99, Q = 74, R = 74 */
 	pll4: st,pll@3 {
-		cfg = < 5 126 8 8 8 PQR(1,1,1) >;
+		cfg = < 3 98 5 7 7 PQR(1,1,1) >;
 	};
 };
 

fdts/stm32mp157c-ev1.dts

@@ -3,23 +3,65 @@
  * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
  * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
  */
-
 /dts-v1/;
+
 #include "stm32mp157c-ed1.dts"
 
 / {
-	model = "STMicroelectronics STM32MP157C-EV1 pmic eval daughter on eval mother";
+	model = "STMicroelectronics STM32MP157C eval daughter on eval mother";
 	compatible = "st,stm32mp157c-ev1", "st,stm32mp157c-ed1", "st,stm32mp157";
 
 	chosen {
-		bootargs = "earlyprintk console=ttyS3,115200 root=/dev/ram";
-		stdout-path = "serial3:115200n8";
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial1 = &usart3;
+	};
+};
+
+&fmc {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	nand: nand@0 {
+		reg = <0>;
+		nand-on-flash-bbt;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&qspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>;
+	reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	flash0: mx66l51235l@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <108000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	flash1: mx66l51235l@1 {
+		compatible = "jedec,spi-nor";
+		reg = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <108000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
 	};
 };
 
 &usart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&usart3_pins_a>;
-	resets = <&rcc USART3_R>;
 	status = "disabled";
 };

fdts/stm32mp157c.dtsi

@@ -3,7 +3,7 @@
  * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
  * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
  */
-
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/stm32mp1-clks.h>
 #include <dt-bindings/reset/stm32mp1-resets.h>
 
@@ -11,15 +11,12 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 
-	aliases {
-		serial0 = &usart1;
-		serial1 = &usart2;
-		serial2 = &usart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-		serial5 = &usart6;
-		serial6 = &uart7;
-		serial7 = &uart8;
+	intc: interrupt-controller@a0021000 {
+		compatible = "arm,cortex-a7-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0xa0021000 0x1000>,
+		      <0xa0022000 0x2000>;
 	};
 
 	clocks {
@@ -56,7 +53,7 @@
 		clk_i2s_ckin: i2s_ckin {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
-			clock-frequency = <64000000>;
+			clock-frequency = <0>;
 		};
 
 		clk_dsi_phy: ck_dsi_phy {
@@ -64,31 +61,28 @@
 			compatible = "fixed-clock";
 			clock-frequency = <0>;
 		};
-
-		clk_usbo_48m: ck_usbo_48m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <48000000>;
-		};
 	};
 
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
+		interrupt-parent = <&intc>;
 		ranges;
 
 		usart2: serial@4000e000 {
-			compatible = "st,stm32h7-usart";
+			compatible = "st,stm32h7-uart";
 			reg = <0x4000e000 0x400>;
 			clocks = <&rcc USART2_K>;
+			resets = <&rcc USART2_R>;
 			status = "disabled";
 		};
 
 		usart3: serial@4000f000 {
-			compatible = "st,stm32h7-usart";
+			compatible = "st,stm32h7-uart";
 			reg = <0x4000f000 0x400>;
 			clocks = <&rcc USART3_K>;
+			resets = <&rcc USART3_R>;
 			status = "disabled";
 		};
 
@@ -96,6 +90,7 @@
 			compatible = "st,stm32h7-uart";
 			reg = <0x40010000 0x400>;
 			clocks = <&rcc UART4_K>;
+			resets = <&rcc UART4_R>;
 			status = "disabled";
 		};
 
@@ -103,6 +98,7 @@
 			compatible = "st,stm32h7-uart";
 			reg = <0x40011000 0x400>;
 			clocks = <&rcc UART5_K>;
+			resets = <&rcc UART5_R>;
 			status = "disabled";
 		};
 
@@ -111,6 +107,7 @@
 			compatible = "st,stm32h7-uart";
 			reg = <0x40018000 0x400>;
 			clocks = <&rcc UART7_K>;
+			resets = <&rcc UART7_R>;
 			status = "disabled";
 		};
 
@@ -118,21 +115,23 @@
 			compatible = "st,stm32h7-uart";
 			reg = <0x40019000 0x400>;
 			clocks = <&rcc UART8_K>;
+			resets = <&rcc UART8_R>;
 			status = "disabled";
 		};
 
 		usart6: serial@44003000 {
-			compatible = "st,stm32h7-usart";
+			compatible = "st,stm32h7-uart";
 			reg = <0x44003000 0x400>;
 			clocks = <&rcc USART6_K>;
+			resets = <&rcc USART6_R>;
 			status = "disabled";
 		};
 
 		sdmmc3: sdmmc@48004000 {
 			compatible = "st,stm32-sdmmc2";
 			reg = <0x48004000 0x400>, <0x48005000 0x400>;
-			reg-names = "sdmmc", "delay";
 			clocks = <&rcc SDMMC3_K>;
+			clock-names = "apb_pclk";
 			resets = <&rcc SDMMC3_R>;
 			cap-sd-highspeed;
 			cap-mmc-highspeed;
@@ -141,17 +140,34 @@
 		};
 
 		rcc: rcc@50000000 {
-			compatible = "syscon", "st,stm32mp1-rcc";
+			compatible = "st,stm32mp1-rcc", "syscon";
+			reg = <0x50000000 0x1000>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
-			reg = <0x50000000 0x1000>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		rcc_reboot: rcc-reboot@50000000 {
-				compatible = "syscon-reboot";
-				regmap = <&rcc>;
-				offset = <0x404>;
-				mask = <0x1>;
+		pwr: pwr@50001000 {
+			compatible = "st,stm32mp1-pwr", "syscon", "simple-mfd";
+			reg = <0x50001000 0x400>;
+		};
+
+		exti: interrupt-controller@5000d000 {
+			compatible = "st,stm32mp1-exti", "syscon";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x5000d000 0x400>;
+
+			/* exti_pwr is an extra interrupt controller used for
+			 * EXTI 55 to 60. It's mapped on pwr interrupt
+			 * controller.
+			 */
+			exti_pwr: exti-pwr {
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupt-parent = <&pwr>;
+				st,irq-number = <6>;
+			};
 		};
 
 		rng1: rng@54003000 {
@@ -162,13 +178,15 @@
 			status = "disabled";
 		};
 
-		fmc_nand: fmc_nand@58002000 {
-			compatible = "st,stm32mp1-fmc";
+		fmc: nand-controller@58002000 {
+			compatible = "st,stm32mp15-fmc2";
 			reg = <0x58002000 0x1000>,
-			      <0x80000000 0x40000>,
-			      <0x81000000 0x40000>,
-			      <0x88000000 0x40000>,
-			      <0x89000000 0x40000>;
+			      <0x80000000 0x1000>,
+			      <0x88010000 0x1000>,
+			      <0x88020000 0x1000>,
+			      <0x81000000 0x1000>,
+			      <0x89010000 0x1000>,
+			      <0x89020000 0x1000>;
 			clocks = <&rcc FMC_K>;
 			resets = <&rcc FMC_R>;
 			status = "disabled";
@@ -177,15 +195,17 @@
 		qspi: qspi@58003000 {
 			compatible = "st,stm32f469-qspi";
 			reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
+			reg-names = "qspi", "qspi_mm";
 			clocks = <&rcc QSPI_K>;
+			resets = <&rcc QSPI_R>;
 			status = "disabled";
 		};
 
 		sdmmc1: sdmmc@58005000 {
 			compatible = "st,stm32-sdmmc2";
 			reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
-			reg-names = "sdmmc", "delay";
 			clocks = <&rcc SDMMC1_K>;
+			clock-names = "apb_pclk";
 			resets = <&rcc SDMMC1_R>;
 			cap-sd-highspeed;
 			cap-mmc-highspeed;
@@ -196,8 +216,8 @@
 		sdmmc2: sdmmc@58007000 {
 			compatible = "st,stm32-sdmmc2";
 			reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
-			reg-names = "sdmmc", "delay";
 			clocks = <&rcc SDMMC2_K>;
+			clock-names = "apb_pclk";
 			resets = <&rcc SDMMC2_R>;
 			cap-sd-highspeed;
 			cap-mmc-highspeed;
@@ -205,7 +225,7 @@
 			status = "disabled";
 		};
 
-		iwdg2: iwdg@5a002000 {
+		iwdg2: watchdog@5a002000 {
 			compatible = "st,stm32mp1-iwdg";
 			reg = <0x5a002000 0x400>;
 			clocks = <&rcc IWDG2>, <&rcc CK_LSI>;
@@ -214,15 +234,34 @@
 		};
 
 		usart1: serial@5c000000 {
-			compatible = "st,stm32h7-usart";
+			compatible = "st,stm32h7-uart";
 			reg = <0x5c000000 0x400>;
+			interrupt-names = "event", "wakeup";
+			interrupts-extended = <&intc GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+					      <&exti 26 1>;
 			clocks = <&rcc USART1_K>;
+			resets = <&rcc USART1_R>;
+			status = "disabled";
+		};
+
+		spi6: spi@5c001000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32h7-spi";
+			reg = <0x5c001000 0x400>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SPI6_K>;
+			resets = <&rcc SPI6_R>;
 			status = "disabled";
 		};
 
 		i2c4: i2c@5c002000 {
 			compatible = "st,stm32f7-i2c";
 			reg = <0x5c002000 0x400>;
+			interrupt-names = "event", "error", "wakeup";
+			interrupts-extended = <&intc GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+					      <&exti 24 1>;
 			clocks = <&rcc I2C4_K>;
 			resets = <&rcc I2C4_R>;
 			#address-cells = <1>;
@@ -235,6 +274,36 @@
 			reg = <0x5c004000 0x400>;
 			clocks = <&rcc RTCAPB>, <&rcc RTC>;
 			clock-names = "pclk", "rtc_ck";
+			interrupts-extended = <&intc GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+					      <&exti 19 1>;
+			status = "disabled";
+		};
+
+		bsec: nvmem@5c005000 {
+			compatible = "st,stm32mp15-bsec";
+			reg = <0x5c005000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ts_cal1: calib@5c {
+				reg = <0x5c 0x2>;
+			};
+			ts_cal2: calib@5e {
+				reg = <0x5e 0x2>;
+			};
+		};
+
+		i2c6: i2c@5c009000 {
+			compatible = "st,stm32f7-i2c";
+			reg = <0x5c009000 0x400>;
+			interrupt-names = "event", "error", "wakeup";
+			interrupts-extended = <&intc GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					      <&exti 54 1>;
+			clocks = <&rcc I2C6_K>;
+			resets = <&rcc I2C6_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
 		};
 	};
 };

fdts/stm32mp157caa-pinctrl.dtsi

@@ -7,8 +7,8 @@
 #include "stm32mp157-pinctrl.dtsi"
 / {
 	soc {
-		pinctrl: pin-controller {
-			compatible = "st,stm32mp157caa-pinctrl";
+		pinctrl: pin-controller@50002000 {
+			st,package = <STM32MP157CAA>;
 
 			gpioa: gpio@50002000 {
 				status = "okay";
@@ -77,8 +77,8 @@
 			};
 		};
 
-		pinctrl_z: pin-controller-z {
-			compatible = "st,stm32mp157caa-z-pinctrl";
+		pinctrl_z: pin-controller-z@54004000 {
+			st,package = <STM32MP157CAA>;
 
 			gpioz: gpio@54004000 {
 				status = "okay";

include/drivers/st/bsec.h

+/*
+ * Copyright (c) 2017-2019, STMicroelectronics - All Rights Reserved
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef BSEC_H
+#define BSEC_H
+
+#include <stdbool.h>
+#include <stdint.h>
+
+#include <lib/utils_def.h>
+
+/*
+ * IP configuration
+ */
+#define BSEC_OTP_MASK			GENMASK(4, 0)
+#define BSEC_OTP_BANK_SHIFT		5
+#define BSEC_TIMEOUT_VALUE		0xFFFF
+
+#define ADDR_LOWER_OTP_PERLOCK_SHIFT	0x03
+#define DATA_LOWER_OTP_PERLOCK_BIT	0x03U /* 2 significants bits are used */
+#define DATA_LOWER_OTP_PERLOCK_MASK	GENMASK(2, 0)
+#define ADDR_UPPER_OTP_PERLOCK_SHIFT	0x04
+#define DATA_UPPER_OTP_PERLOCK_BIT	0x01U /* 1 significants bits are used */
+#define DATA_UPPER_OTP_PERLOCK_MASK	GENMASK(3, 0)
+
+/*
+ * Return status
+ */
+#define BSEC_OK				0U
+#define BSEC_ERROR			0xFFFFFFFFU
+#define BSEC_DISTURBED			0xFFFFFFFEU
+#define BSEC_INVALID_PARAM		0xFFFFFFFCU
+#define BSEC_PROG_FAIL			0xFFFFFFFBU
+#define BSEC_LOCK_FAIL			0xFFFFFFFAU
+#define BSEC_WRITE_FAIL			0xFFFFFFF9U
+#define BSEC_SHADOW_FAIL		0xFFFFFFF8U
+#define BSEC_TIMEOUT			0xFFFFFFF7U
+
+/*
+ * BSEC REGISTER OFFSET (base relative)
+ */
+#define BSEC_OTP_CONF_OFF		0x000U
+#define BSEC_OTP_CTRL_OFF		0x004U
+#define BSEC_OTP_WRDATA_OFF		0x008U
+#define BSEC_OTP_STATUS_OFF		0x00CU
+#define BSEC_OTP_LOCK_OFF		0x010U
+#define BSEC_DEN_OFF			0x014U
+#define BSEC_DISTURBED_OFF		0x01CU
+#define BSEC_DISTURBED1_OFF		0x020U
+#define BSEC_DISTURBED2_OFF		0x024U
+#define BSEC_ERROR_OFF			0x034U
+#define BSEC_ERROR1_OFF			0x038U
+#define BSEC_ERROR2_OFF			0x03CU
+#define BSEC_WRLOCK_OFF			0x04CU /* Safmem permanent lock */
+#define BSEC_WRLOCK1_OFF		0x050U
+#define BSEC_WRLOCK2_OFF		0x054U
+#define BSEC_SPLOCK_OFF			0x064U /* Program safmem sticky lock */
+#define BSEC_SPLOCK1_OFF		0x068U
+#define BSEC_SPLOCK2_OFF		0x06CU
+#define BSEC_SWLOCK_OFF			0x07CU /* Write in OTP sticky lock */
+#define BSEC_SWLOCK1_OFF		0x080U
+#define BSEC_SWLOCK2_OFF		0x084U
+#define BSEC_SRLOCK_OFF			0x094U /* Shadowing sticky lock */
+#define BSEC_SRLOCK1_OFF		0x098U
+#define BSEC_SRLOCK2_OFF		0x09CU
+#define BSEC_JTAG_IN_OFF		0x0ACU
+#define BSEC_JTAG_OUT_OFF		0x0B0U
+#define BSEC_SCRATCH_OFF		0x0B4U
+#define BSEC_OTP_DATA_OFF		0x200U
+#define BSEC_IPHW_CFG_OFF		0xFF0U
+#define BSEC_IPVR_OFF			0xFF4U
+#define BSEC_IP_ID_OFF			0xFF8U
+#define BSEC_IP_MAGIC_ID_OFF		0xFFCU
+
+/*
+ * BSEC_CONFIGURATION Register
+ */
+#define BSEC_CONF_POWER_UP_MASK		BIT(0)
+#define BSEC_CONF_POWER_UP_SHIFT	0
+#define BSEC_CONF_FRQ_MASK		GENMASK(2, 1)
+#define BSEC_CONF_FRQ_SHIFT		1
+#define BSEC_CONF_PRG_WIDTH_MASK	GENMASK(6, 3)
+#define BSEC_CONF_PRG_WIDTH_SHIFT	3
+#define BSEC_CONF_TREAD_MASK		GENMASK(8, 7)
+#define BSEC_CONF_TREAD_SHIFT		7
+
+/*
+ * BSEC_CONTROL Register
+ */
+#define BSEC_READ			0x000U
+#define BSEC_WRITE			0x100U
+#define BSEC_LOCK			0x200U
+
+/*
+ * BSEC_OTP_LOCK register
+ */
+#define UPPER_OTP_LOCK_MASK		BIT(0)
+#define UPPER_OTP_LOCK_SHIFT		0
+#define DENREG_LOCK_MASK		BIT(2)
+#define DENREG_LOCK_SHIFT		2
+#define GPLOCK_LOCK_MASK		BIT(4)
+#define GPLOCK_LOCK_SHIFT		4
+
+/*
+ * BSEC_OTP_STATUS Register
+ */
+#define BSEC_MODE_STATUS_MASK		GENMASK(2, 0)
+#define BSEC_MODE_BUSY_MASK		BIT(3)
+#define BSEC_MODE_PROGFAIL_MASK		BIT(4)
+#define BSEC_MODE_PWR_MASK		BIT(5)
+#define BSEC_MODE_BIST1_LOCK_MASK	BIT(6)
+#define BSEC_MODE_BIST2_LOCK_MASK	BIT(7)
+
+/* OTP MODE*/
+#define BSEC_MODE_OPEN1			0x00
+#define BSEC_MODE_SECURED		0x01
+#define BSEC_MODE_OPEN2			0x02
+#define BSEC_MODE_INVALID		0x04
+
+/* BSEC_DENABLE Register */
+#define BSEC_HDPEN			BIT(4)
+#define BSEC_SPIDEN			BIT(5)
+#define BSEC_SPINDEN			BIT(6)
+#define BSEC_DBGSWGEN			BIT(10)
+#define BSEC_DEN_ALL_MSK		GENMASK(10, 0)
+
+/* BSEC_FENABLE Register */
+#define BSEC_FEN_ALL_MSK		GENMASK(14, 0)
+
+/*
+ * OTP Lock services definition
+ * Value must corresponding to the bit number in the register
+ */
+#define BSEC_LOCK_UPPER_OTP		0x00
+#define BSEC_LOCK_DEBUG			0x02
+#define BSEC_LOCK_PROGRAM		0x03
+
+/* Values for struct bsec_config::freq */
+#define FREQ_10_20_MHZ			0x0
+#define FREQ_20_30_MHZ			0x1
+#define FREQ_30_45_MHZ			0x2
+#define FREQ_45_67_MHZ			0x3
+
+/*
+ * Device info structure, providing device-specific functions and a means of
+ * adding driver-specific state
+ */
+struct bsec_config {
+	uint8_t tread;		/* SAFMEM Reading current level default 0 */
+	uint8_t pulse_width;	/* SAFMEM Programming pulse width default 1 */
+	uint8_t freq;		/* SAFMEM CLOCK see freq value define
+				 * default FREQ_45_67_MHZ
+				 */
+	uint8_t power;		/* Power up SAFMEM. 1 power up, 0 power off */
+	uint8_t prog_lock;	/* Programming Sticky lock
+				 * 1 programming is locked until next reset
+				 */
+	uint8_t den_lock;	/* Debug enable sticky lock
+				 * 1 debug enable is locked until next reset
+				 */
+	uint8_t upper_otp_lock;	/* Shadowing of upper OTP sticky lock
+				 * 1 shadowing of upper OTP is locked
+				 * until next reset
+				 */
+};
+
+uint32_t bsec_probe(void);
+uint32_t bsec_get_base(void);
+
+uint32_t bsec_set_config(struct bsec_config *cfg);
+uint32_t bsec_get_config(struct bsec_config *cfg);
+
+uint32_t bsec_shadow_register(uint32_t otp);
+uint32_t bsec_read_otp(uint32_t *val, uint32_t otp);
+uint32_t bsec_write_otp(uint32_t val, uint32_t otp);
+uint32_t bsec_program_otp(uint32_t val, uint32_t otp);
+uint32_t bsec_permanent_lock_otp(uint32_t otp);
+
+uint32_t bsec_write_debug_conf(uint32_t val);
+uint32_t bsec_read_debug_conf(void);
+uint32_t bsec_write_feature_conf(uint32_t val);
+uint32_t bsec_read_feature_conf(uint32_t *val);
+
+uint32_t bsec_get_status(void);
+uint32_t bsec_get_hw_conf(void);
+uint32_t bsec_get_version(void);
+uint32_t bsec_get_id(void);
+uint32_t bsec_get_magic_id(void);
+
+bool bsec_write_sr_lock(uint32_t otp, uint32_t value);
+bool bsec_read_sr_lock(uint32_t otp);
+bool bsec_write_sw_lock(uint32_t otp, uint32_t value);
+bool bsec_read_sw_lock(uint32_t otp);
+bool bsec_write_sp_lock(uint32_t otp, uint32_t value);
+bool bsec_read_sp_lock(uint32_t otp);
+bool bsec_wr_lock(uint32_t otp);
+uint32_t bsec_otp_lock(uint32_t service, uint32_t value);
+
+bool bsec_mode_is_closed_device(void);
+uint32_t bsec_shadow_read_otp(uint32_t *otp_value, uint32_t word);
+uint32_t bsec_check_nsec_access_rights(uint32_t otp);
+
+#endif /* BSEC_H */

include/drivers/st/stm32_gpio.h

 /*
- * Copyright (c) 2015-2018, STMicroelectronics - All Rights Reserved
+ * Copyright (c) 2015-2019, STMicroelectronics - All Rights Reserved
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -9,10 +9,6 @@
 
 #include <lib/utils_def.h>
 
-#define STM32_GPIOA_BANK	U(0x50002000)
-#define STM32_GPIOZ_BANK	U(0x54004000)
-#define STM32_GPIO_BANK_OFFSET	U(0x1000)
-
 #define GPIO_MODE_OFFSET	U(0x00)
 #define GPIO_TYPE_OFFSET	U(0x04)
 #define GPIO_SPEED_OFFSET	U(0x08)
@@ -20,56 +16,14 @@
 #define GPIO_BSRR_OFFSET	U(0x18)
 #define GPIO_AFRL_OFFSET	U(0x20)
 #define GPIO_AFRH_OFFSET	U(0x24)
+#define GPIO_SECR_OFFSET	U(0x30)
 
 #define GPIO_ALT_LOWER_LIMIT	U(0x08)
 
-#define GPIO_BANK_A		U(0x00)
-#define GPIO_BANK_B		U(0x01)
-#define GPIO_BANK_C		U(0x02)
-#define GPIO_BANK_D		U(0x03)
-#define GPIO_BANK_E		U(0x04)
-#define GPIO_BANK_F		U(0x05)
-#define GPIO_BANK_G		U(0x06)
-#define GPIO_BANK_H		U(0x07)
-#define GPIO_BANK_I		U(0x08)
-#define GPIO_BANK_J		U(0x09)
-#define GPIO_BANK_K		U(0x0A)
-#define GPIO_BANK_Z		U(0x19)
-
-#define GPIO_PIN_0		U(0x00)
-#define GPIO_PIN_1		U(0x01)
-#define GPIO_PIN_2		U(0x02)
-#define GPIO_PIN_3		U(0x03)
-#define GPIO_PIN_4		U(0x04)
-#define GPIO_PIN_5		U(0x05)
-#define GPIO_PIN_6		U(0x06)
-#define GPIO_PIN_7		U(0x07)
-#define GPIO_PIN_8		U(0x08)
-#define GPIO_PIN_9		U(0x09)
-#define GPIO_PIN_10		U(0x0A)
-#define GPIO_PIN_11		U(0x0B)
-#define GPIO_PIN_12		U(0x0C)
-#define GPIO_PIN_13		U(0x0D)
-#define GPIO_PIN_14		U(0x0E)
-#define GPIO_PIN_15		U(0x0F)
-#define GPIO_PIN_MAX		GPIO_PIN_15
+#define GPIO_PIN_(_x)		U(_x)
+#define GPIO_PIN_MAX		GPIO_PIN_(15)
 
-#define GPIO_ALTERNATE_0	0x00
-#define GPIO_ALTERNATE_1	0x01
-#define GPIO_ALTERNATE_2	0x02
-#define GPIO_ALTERNATE_3	0x03
-#define GPIO_ALTERNATE_4	0x04
-#define GPIO_ALTERNATE_5	0x05
-#define GPIO_ALTERNATE_6	0x06
-#define GPIO_ALTERNATE_7	0x07
-#define GPIO_ALTERNATE_8	0x08
-#define GPIO_ALTERNATE_9	0x09
-#define GPIO_ALTERNATE_10	0x0A
-#define GPIO_ALTERNATE_11	0x0B
-#define GPIO_ALTERNATE_12	0x0C
-#define GPIO_ALTERNATE_13	0x0D
-#define GPIO_ALTERNATE_14	0x0E
-#define GPIO_ALTERNATE_15	0x0F
+#define GPIO_ALTERNATE_(_x)	U(_x)
 #define GPIO_ALTERNATE_MASK	U(0x0F)
 
 #define GPIO_MODE_INPUT		0x00
@@ -82,8 +36,8 @@
 
 #define GPIO_SPEED_LOW		0x00
 #define GPIO_SPEED_MEDIUM	0x01
-#define GPIO_SPEED_FAST		0x02
-#define GPIO_SPEED_HIGH		0x03
+#define GPIO_SPEED_HIGH		0x02
+#define GPIO_SPEED_VERY_HIGH	0x03
 #define GPIO_SPEED_MASK		U(0x03)
 
 #define GPIO_NO_PULL		0x00
@@ -94,8 +48,10 @@
 #ifndef __ASSEMBLY__
 #include <stdint.h>
 
+int dt_set_pinctrl_config(int node);
 void set_gpio(uint32_t bank, uint32_t pin, uint32_t mode, uint32_t speed,
-	      uint32_t pull, uint32_t alternate);
+	      uint32_t pull, uint32_t alternate, uint8_t status);
+void set_gpio_secure_cfg(uint32_t bank, uint32_t pin, bool secure);
 #endif /*__ASSEMBLY__*/
 
 #endif /* STM32_GPIO_H */

include/drivers/st/stm32mp1_ddr.h

 /*
- * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
+ * Copyright (C) 2018-2019, STMicroelectronics - All Rights Reserved
  *
  * SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
  */
@@ -153,7 +153,7 @@ struct stm32mp1_ddrphy_cal {
 
 struct stm32mp1_ddr_info {
 	const char *name;
-	uint16_t speed; /* in MHZ */
+	uint32_t speed; /* in kHZ */
 	uint32_t size;  /* Memory size in byte = col * row * width */
 };
 
@@ -168,7 +168,7 @@ struct stm32mp1_ddr_config {
 	struct stm32mp1_ddrphy_cal p_cal;
 };
 
-int stm32mp1_ddr_clk_enable(struct ddr_info *priv, uint16_t mem_speed);
+int stm32mp1_ddr_clk_enable(struct ddr_info *priv, uint32_t mem_speed);
 void stm32mp1_ddr_init(struct ddr_info *priv,
 		       struct stm32mp1_ddr_config *config);
 #endif /* STM32MP1_DDR_H */