Skip to content

GitLab

Switch branch/tag
  1. 02 Aug, 2021 1 commit
  3. 29 Jun, 2021 1 commit
  5. 27 May, 2021 1 commit
  7. 17 May, 2021 1 commit
  9. 29 Apr, 2021 1 commit
  11. 28 Apr, 2021 1 commit
  13. 20 Apr, 2021 1 commit
    • Mikael Olsson's avatar
      Add SiP service to configure Arm Ethos-N NPU · 76a21174
      Mikael Olsson authored 
      

By default the Arm Ethos-N NPU will boot up in secure mode. In this mode
the non-secure world cannot access the registers needed to use the NPU.
To still allow the non-secure world to use the NPU, a SiP service has
been added that can delegate non-secure access to the registers needed
to use it.

Only the HW_CONFIG for the Arm Juno platform has been updated to include
the device tree for the NPU and the platform currently only loads the
HW_CONFIG in AArch64 builds.
Signed-off-by: default avatarMikael Olsson <mikael.olsson@arm.com>
Change-Id: I65dfd864042ed43faae0a259dcf319cbadb5f3d2
      76a21174
  15. 14 Dec, 2020 1 commit
  17. 28 Oct, 2020 1 commit
    • David Horstmann's avatar
      Use constant stack size with RECLAIM_INIT_CODE · 3ed5606b
      David Horstmann authored 
      

Currently, when RECLAIM_INIT_CODE is set, the
stacks are scaled to ensure that the entirety
of the init section can be reclaimed as stack.

This causes an issue in lib/psci/aarch64/psci_helpers.S,
where the stack size is used for cache operations in
psci_do_pwrdown_cache_maintenance(). If the stacks
are scaled, then the PSCI code may fail to invalidate
some of the stack memory before power down.

Resizing stacks is also not good for stability in general,
since code that works with a small number of cores may
overflow the stack when the number of cores is increased.

Change to make every stack be PLATFORM_STACK_SIZE big,
and allow the total stack to be smaller than the
init section.

Any pages of the init section not reclaimed as
stack will be set to read-only and execute-never,
for security.

Change-Id: I10b3884981006431f2fcbec3864c81d4a8c246e8
Signed-off-by: default avatarDavid Horstmann <david.horstmann@arm.com>
      3ed5606b
  19. 20 Oct, 2020 1 commit
  21. 28 Aug, 2020 1 commit
  23. 26 Aug, 2020 1 commit
  25. 14 Aug, 2020 1 commit
    • Manish Pandey's avatar
      plat/arm: enable support for Plat owned SPs · 990d972f
      Manish Pandey authored 
      

For Arm platforms SPs are loaded by parsing tb_fw_config.dts and
adding them to SP structure sequentially, which in-turn is appended to
loadable image list.

With recently introduced dualroot CoT for SPs where they are owned
either by SiP or by Platform. SiP owned SPs index starts at SP_PKG1_ID
and Plat owned SPs index starts at SP_PKG5_ID. As the start index of SP
depends on the owner, there should be a mechanism to parse owner of a SP
and put it at the correct index in SP structure.

This patch adds support for parsing a new optional field "owner" and
based on it put SP details(UUID & Load-address) at the correct index in
SP structure.

Change-Id: Ibd255b60d5c45023cc7fdb10971bef6626cb560b
Signed-off-by: default avatarManish Pandey <manish.pandey2@arm.com>
      990d972f
  27. 10 Aug, 2020 1 commit
    • Alexei Fedorov's avatar
      plat/arm: Reduce size of BL31 binary · fa1fdb22
      Alexei Fedorov authored 
      

BL31 binary size is aligned to 4KB because of the
code in include\plat\arm\common\arm_reclaim_init.ld.S:
    __INIT_CODE_UNALIGNED__ = .;
    . = ALIGN(PAGE_SIZE);
    __INIT_CODE_END__ = .;
with all the zero data after the last instruction of
BL31 code to the end of the page.
This causes increase in size of BL31 binary stored in FIP
and its loading time by BL2.
This patch reduces the size of BL31 image by moving
page alignment from __INIT_CODE_END__ to __STACKS_END__
which also increases the stack size for secondary CPUs.

Change-Id: Ie2ec503fc774c22c12ec506d74fd3ef2b0b183a9
Signed-off-by: default avatarAlexei Fedorov <Alexei.Fedorov@arm.com>
      fa1fdb22
  29. 30 Jul, 2020 1 commit
  31. 23 Jul, 2020 1 commit
  33. 21 Jul, 2020 1 commit
  35. 10 Jul, 2020 1 commit
    • Manish V Badarkhe's avatar
      plat/arm, dts: Update platform device tree for CoT · 2a0ef943
      Manish V Badarkhe authored 
      

Included cot_descriptors.dtsi in platform device tree
(fvp_tb_fw_config.dts).

Also, updated the maximum size of tb_fw_config to 0x1800
in order to accomodate the device tree for CoT descriptors.

Follow up patch will parse the device tree for these CoT descriptors
and fill the CoT descriptor structures at runtime instead of using
static CoT descriptor structures in the code base.
Signed-off-by: default avatarManish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I90122bc713f6842b82fb019b04caf42629b4f45a
      2a0ef943
  37. 25 Jun, 2020 2 commits
    • Manish V Badarkhe's avatar
      plat/arm: Increase size of firmware configuration area · ce4ca1a8
      Manish V Badarkhe authored 
      

Increased the size of firmware configuration area to accommodate
all configs.

Updated maximum size of following bootloaders due to increase
in firmware configs size and addition of the code in the BL2.

1. Increased maximum size of BL2 for Juno platform in no
   optimisation case.
2. Reduced maximum size of BL31 for fvp and Juno platform.
3. Reduced maximum size of BL32 for Juno platform.

Change-Id: Ifba0564df0d1fe86175bed9fae87fdcf013b1831
Signed-off-by: default avatarManish V Badarkhe <Manish.Badarkhe@arm.com>
      ce4ca1a8
    • Manish V Badarkhe's avatar
      plat/arm: Load and populate fw_config and tb_fw_config · 82869675
      Manish V Badarkhe authored 
      

Modified the code to do below changes:

1. Load tb_fw_config along with fw_config by BL1.
2. Populate fw_config device tree information in the
   BL1 to load tb_fw_config.
3. In BL2, populate fw_config information to retrieve
   the address of tb_fw_config and then tb_fw_config
   gets populated using retrieved address.
4. Avoid processing of configuration file in case of error
   value returned from "fw_config_load" function.
5. Updated entrypoint information for BL2 image so
   that it's arg0 should point to fw_config address.
Signed-off-by: default avatarManish V Badarkhe <Manish.Badarkhe@arm.com>
Signed-off-by: default avatarLouis Mayencourt <louis.mayencourt@arm.com>
Change-Id: Ife6f7b673a074e7f544ee3d1bda7645fd5b2886c
      82869675
  39. 24 Jun, 2020 1 commit
  41. 09 Jun, 2020 1 commit
  43. 31 May, 2020 1 commit
    • Alexei Fedorov's avatar
      TF-A: Fix BL31 linker script error · 34dd1e96
      Alexei Fedorov authored 
      

The patch fixes BL31 linker script error
"Init code ends past the end of the stacks"
for platforms with number of CPUs less than 4,
which is caused by __STACKS_END__ address being
lower than __INIT_CODE_END__.
The modified BL31 linker script detects such cases
and increases the total amount of stack memory,
setting __STACKS_END__ = __INIT_CODE_END__, and
CPUs' stacks are calculated by BL31 'plat_get_my_stack'
function accordingly. For platforms with more than 4 CPUs
and __INIT_CODE_END__ < __STACKS_END__ stack memory does not
increase and allocated CPUs' stacks match the existing
implementation.
The patch removes exclusion of PSCI initialization
functions from the reclaimed .init section in
'arm_reclaim_init.ld.S' script, which increases the
size of reclaimed memory region.

Change-Id: I927773e00dd84e1ffe72f9ee534f4f2fc7b6153c
Signed-off-by: default avatarAlexei Fedorov <Alexei.Fedorov@arm.com>
      34dd1e96
  45. 15 May, 2020 1 commit
  47. 02 Apr, 2020 1 commit
  49. 30 Mar, 2020 1 commit
  51. 25 Mar, 2020 1 commit
  53. 17 Mar, 2020 1 commit
  55. 11 Mar, 2020 1 commit
    • Madhukar Pappireddy's avatar
      fconf: necessary modifications to support fconf in BL31 & SP_MIN · 26d1e0c3
      Madhukar Pappireddy authored 
      

Necessary infrastructure added to integrate fconf framework in BL31 & SP_MIN.
Created few populator() functions which parse HW_CONFIG device tree
and registered them with fconf framework. Many of the changes are
only applicable for fvp platform.

This patch:
1. Adds necessary symbols and sections in BL31, SP_MIN linker script
2. Adds necessary memory map entry for translation in BL31, SP_MIN
3. Creates an abstraction layer for hardware configuration based on
   fconf framework
4. Adds necessary changes to build flow (makefiles)
5. Minimal callback to read hw_config dtb for capturing properties
   related to GIC(interrupt-controller node)
6. updates the fconf documentation

Change-Id: Ib6292071f674ef093962b9e8ba0d322b7bf919af
Signed-off-by: default avatarMadhukar Pappireddy <madhukar.pappireddy@arm.com>
      26d1e0c3
  57. 04 Mar, 2020 1 commit
    • Manish Pandey's avatar
      SPMD: loading Secure Partition payloads · cb3b5344
      Manish Pandey authored 
      

This patch implements loading of Secure Partition packages using
existing framework of loading other bl images.

The current framework uses a statically defined array to store all the
possible image types and at run time generates a link list and traverse
through it to load different images.

To load SPs, a new array of fixed size is introduced which will be
dynamically populated based on number of SPs available in the system
and it will be appended to the loadable images list.

Change-Id: I8309f63595f2a71b28a73b922d20ccba9c4f6ae4
Signed-off-by: default avatarManish Pandey <manish.pandey2@arm.com>
      cb3b5344
  59. 03 Mar, 2020 1 commit
  61. 24 Feb, 2020 2 commits
    • Petre-Ionut Tudor's avatar
      Read-only xlat tables for BL31 memory · 60e8f3cf
      Petre-Ionut Tudor authored 
      

This patch introduces a build flag which allows the xlat tables
to be mapped in a read-only region within BL31 memory. It makes it
much harder for someone who has acquired the ability to write to
arbitrary secure memory addresses to gain control of the
translation tables.

The memory attributes of the descriptors describing the tables
themselves are changed to read-only secure data. This change
happens at the end of BL31 runtime setup. Until this point, the
tables have read-write permissions. This gives a window of
opportunity for changes to be made to the tables with the MMU on
(e.g. reclaiming init code). No changes can be made to the tables
with the MMU turned on from this point onwards. This change is also
enabled for sp_min and tspd.

To make all this possible, the base table was moved to .rodata. The
penalty we pay is that now .rodata must be aligned to the size of
the base table (512B alignment). Still, this is better than putting
the base table with the higher level tables in the xlat_table
section, as that would cost us a full 4KB page.

Changing the tables from read-write to read-only cannot be done with
the MMU on, as the break-before-make sequence would invalidate the
descriptor which resolves the level 3 page table where that very
descriptor is located. This would make the translation required for
writing the changes impossible, generating an MMU fault.

The caches are also flushed.
Signed-off-by: default avatarPetre-Ionut Tudor <petre-ionut.tudor@arm.com>
Change-Id: Ibe5de307e6dc94c67d6186139ac3973516430466
      60e8f3cf
    • Sandrine Bailleux's avatar
      plat/arm: Pass cookie argument down to arm_get_rotpk_info() · 88005701
      Sandrine Bailleux authored 
      

The cookie will be leveraged in the next commit.

Change-Id: Ie8bad275d856d84c27466461cf815529dd860446
Signed-off-by: default avatarSandrine Bailleux <sandrine.bailleux@arm.com>
      88005701
  63. 19 Feb, 2020 3 commits
  65. 10 Feb, 2020 1 commit
  67. 07 Feb, 2020 3 commits