GitLab

This patch adds support to enter System Suspend on Tegra210 platforms
without the traditional BPMP firmware. The BPMP firmware will no longer
be supported on Tegra210 platforms and its functionality will be
divided across the CPU and sc7entry-fw.

The sc7entry-fw takes care of performing the hardware sequence required
to enter System Suspend (SC7 power state) from the COP. The CPU is required
to load this firmware to the internal RAM of the COP and start the sequence.
The CPU also make sure that the COP is off after cold boot and is only
powered on when we want to start the actual System Suspend sequence.

The previous bootloader loads the firmware to TZDRAM and passes its base and
size as part of the boot parameters. The EL3 layer is supposed to sanitize
the parameters before touching the firmware blob.

To assist the warmboot code with the PMIC discovery, EL3 is also supposed to
program PMC's scratch register #210, with appropriate values. Without these
settings the warmboot code wont be able to get the device out of System
Suspend.

Change-Id: I5a7b868512dbfd6cfefd55acf3978a1fd7ebf1e2
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds a default implementation for the platform specific
CPU standby power handler. Tegra SoCs can override this handler
with their own implementations.

Change-Id: I91e513842f194b1e2b1defa2d833bb4d9df5f06b
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds a platform setup handler that gets called after
the MMU is enabled. Platforms wanting to make use of this handler
should declare 'plat_late_platform_setup' handler in their platform
files, to override the default weakly defined handler.

Change-Id: Ibc97a2e5a24608ddea856d0bd543a9d5876f604c
Signed-off-by: Dilan Lee <dilee@nvidia.com>

The non secure world would like to profile the boot path for
the EL3 and S-EL1 firmwares. To allow it to do that, a non-secure
DRAM region (4K) is allocated and the base address is passed to
the EL3 firmware.

This patch adds a library to allow the platform code to store the
tag:timestamp pair to the shared memory. The tegra platform code
then uses the `record` method to add timestamps.

Original change by Akshay Sharan <asharan@nvidia.com>

Change-Id: Idbbef9c83ed84a508b04d85a6637775960dc94ba
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch changes direct writes to ACTLR_ELx registers to use
read-modify-write instead.

Change-Id: I6e0eaa6974583f3035cb3724088f3f1c849da229
Signed-off-by: Steven Kao <skao@nvidia.com>

Main fixes:

* Use int32_t replace int, use uint32_t replace unsign int
  [Rule 4.6]
* Add function define to header file [Rule 8.4]
* Added curly braces ({}) around if statements in order to
  make them compound [Rule 15.6]
* Voided non c-library functions whose return types are not used
  [Rule 17.7]

Change-Id: Ifa3ba4e75046697cfede885096bee9a30efe6519
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>

Main fixes:

Add parentheses to avoid implicit operator precedence [Rule 12.1]

Fixed if statement conditional to be essentially boolean [Rule 14.4]

Added curly braces ({}) around if statements in order to
make them compound [Rule 15.6]

Voided non c-library functions whose return types are not used [Rule 17.7]

Bug 200272157

Change-Id: Ic3ab5a3de95aeb6d2265df940f7fb35ea0f19ab0
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>

Main fixes:

Added explicit casts (e.g. 0U) to integers in order for them to be
compatible with whatever operation they're used in [Rule 10.1]

Force operands of an operator to the same type category [Rule 10.4]

Added curly braces ({}) around if statements in order to
make them compound [Rule 15.6]

Change-Id: I4840c3122939f736113d61f1462af3bd7b0b5085
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>

Main fixes:

Added explicit casts (e.g. 0U) to integers in order for them to be
compatible with whatever operation they're used in [Rule 10.1]

convert object type to match the type of function parameters
[Rule 10.3]

Force operands of an operator to the same type category [Rule 10.4]

Fix implicit widening of composite assignment [Rule 10.6]

Change-Id: I5840a07f37beefc3326ac56d0b4a4701602bd8a8
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>

Main fixes:

Added explicit casts (e.g. 0U) to integers in order for them to be
compatible with whatever operation they're used in [Rule 10.1]

Force operands of an operator to the same type category [Rule 10.4]

Voided non c-library functions whose return types are not used [Rule 17.7]

Change-Id: I758e7ef6d45dd2edf4cd5580e2af15219246e75c
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>

Main fixes:

* Expressions resulting from the expansion of macro parameters
  shall be enclosed in parentheses [Rule 20.7]
* Added explicit casts (e.g. 0U) to integers in order for them
  to be compatible with whatever operation they're used in [Rule
  10.1]
* Fix implicit widening of composite assignment [Rule 10.6]

Change-Id: Ia83c3ab6e4c8c03c19c950978a7936ebfc290590
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds capability to read the boot flag to enable L2 ECC
and Parity Protection bit for the Cortex-A57 CPUs. The previous
bootloader sets this flag value for the platform.

* with some coverity fix:
MISRA C-2012 Directive 4.6
MISRA C-2012 Rule 2.5
MISRA C-2012 Rule 10.3
MISRA C-2012 Rule 10.4

Change-Id: Id7303bbbdc290b52919356c31625847b8904b073
Signed-off-by: Harvey Hsieh <hhsieh@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Enforce full include path for includes. Deprecate old paths.

The following folders inside include/lib have been left unchanged:

- include/lib/cpus/${ARCH}
- include/lib/el3_runtime/${ARCH}

The reason for this change is that having a global namespace for
includes isn't a good idea. It defeats one of the advantages of having
folders and it introduces problems that are sometimes subtle (because
you may not know the header you are actually including if there are two
of them).

For example, this patch had to be created because two headers were
called the same way: e0ea0928 ("Fix gpio includes of mt8173 platform
to avoid collision."). More recently, this patch has had similar
problems: 46f9b2c3 ("drivers: add tzc380 support").

This problem was introduced in commit 4ecca339

 ("Move include and
source files to logical locations"). At that time, there weren't too
many headers so it wasn't a real issue. However, time has shown that
this creates problems.

Platforms that want to preserve the way they include headers may add the
removed paths to PLAT_INCLUDES, but this is discouraged.

Change-Id: I39dc53ed98f9e297a5966e723d1936d6ccf2fc8f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

This patch converts Tegra platforms to support native
GICv2 drivers. This involves removes Tegra's GIC driver
port platforms to use interrupt_props

Change-Id: I83d8a690ff276dd97928dc60824a4fd36999bb30
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

All identifiers, regardless of use, that start with two underscores are
reserved. This means they can't be used in header guards.

The style that this project is now to use the full name of the file in
capital letters followed by 'H'. For example, for a file called
"uart_example.h", the header guard is UART_EXAMPLE_H.

The exceptions are files that are imported from other projects:

- CryptoCell driver
- dt-bindings folders
- zlib headers

Change-Id: I50561bf6c88b491ec440d0c8385c74650f3c106e
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

- Migrate to bl31_early_platform_setup2().
- Remove references to removed build options.
- Replace zeromem16() by zeromem().
- Use private definition of bl31_params_t.

This is an incomplete migration, the platform doesn't currently compile.

Change-Id: I67fbf2206678be80c3a16692024221a131cec42f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Commit fdb1964c

 ("xlat: Introduce
MAP_REGION2() macro") added a granularity field to mmap_region_t.

Tegra platforms were using the v2 xlat_tables implementation in
common/tegra_common.mk, but v1 xlat_tables.h headers in soc/*/plat_setup.c
where arrays are being defined. This caused the next physical address to
be read as granularity, causing EINVAL error and triggering an assert.

Consistently use xlat_tables_v2.h header to avoid this.

Fixes ARM-software/tf-issues#548.
Signed-off-by: Andreas Färber <afaerber@suse.de>

Main fixes:

* Use int32_t replace int, use uint32_t replace unsign int [Rule 4.6]
* Added explicit casts (e.g. 0U) to integers in order for them to be
  compatible with whatever operation they're used in [Rule 10.1]
* Force operands of an operator to the same type category [Rule 10.4]
* Fixed assert/if statements conditions to be essentially boolean [Rule 14.4]
* Added curly braces ({}) around if statements in order to
  make them compound [Rule 15.6]
* Convert macros form headers to unsigned ints

Change-Id: I8051cc16499cece2039c9751bd347645f40f0901
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds explicit casts (U(x)) to integers in the tegra_def.h
headers, to make them compatible with whatever operation they're used
in [MISRA-C Rule 10.1]

Change-Id: Ic5fc611aad986a2c6e6e6f625e0753ab9b69eb02
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

To make software license auditing simpler, use SPDX[0] license
identifiers instead of duplicating the license text in every file.

NOTE: Files that have been imported by FreeBSD have not been modified.

[0]: https://spdx.org/



Change-Id: I80a00e1f641b8cc075ca5a95b10607ed9ed8761a
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

Not having U or ULL as a suffix for these enums causes
a lot of unnecessary MISRA issues. This patch adds U or
ULL suffix to these common enums to reduce number of
MISRA issues.
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds support for fake system suspend (SC7).
This is a debug mode, to ensure that a different code path is
executed for cases like pre-silicon development, where a
full-fledged SC7 is not possible in early stages.

This particular patch ensures that, if fake system suspend is
enabled (denoted by tegra_fake_system_suspend variable
having a non-zero value), instead of calling WFI, a request
for a warm reset is made for starting the SC7 exit procedure.

This ensures that the code path of kernel->ATF and back to
kernel is executed without depending on other components
involved in SC7 code path.

Additionally, this patch also adds support for SMC call
from kernel, enabling fake system suspend mode.
Signed-off-by: Vignesh Radhakrishnan <vigneshr@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds support to save the BL31 state to the TZDRAM
before entering system suspend. The TZRAM loses state during
system suspend and so we need to copy the entire BL31 code to
TZDRAM before entering the state.

In order to restore the state on exiting system suspend, a new
CPU reset handler is implemented which gets copied to TZDRAM
during boot. TO keep things simple we use this same reset handler
for booting secondary CPUs too.

Change-Id: I770f799c255d22279b5cdb9b4d587d3a4c54fad7
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch implements handlers which platforms can override to
get the BL31 arguments passed by the previous bootloader.

Change-Id: I6b9628a984644ce1b5de5aa6d7cd890e57241d89
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch modifies the secure IRQ registration process to allow platforms
to specify the target CPUs as well as the owner of the IRQ. IRQs "owned"
by the EL3 would return INTR_TYPE_EL3 whereas those owned by the Trusted
OS would return INTR_TYPE_S_EL1 as a result.

Change-Id: I528f7c8220d0ae0c0f354e78d69e188abb666ef6
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds a handler for FIQ interrupts triggered when
the CPU is in the NS world. The handler stores the NS world's
context along with ELR_EL3/SPSR_EL3.

The NS world driver issues an SMC initially to register it's
handler. The monitor firmware stores this handler address and
jumps to it when the FIQ interrupt fires. Upon entry into the
NS world the driver then issues another SMC to get the CPU
context when the FIQ fired. This allows the NS world driver to
determine the CPU state and call stack when the interrupt
fired. Generally, systems register watchdog interrupts as FIQs
which are then used to get the CPU state during hangs/crashes.

Change-Id: I733af61a08d1318c75acedbe9569a758744edd0c
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Tegra chips support multiple FIQ interrupt sources. These interrupts
are enabled in the GICD/GICC interfaces by the tegra_gic driver. A
new FIQ handler would be added in a subsequent change which can be
registered by the platform code.

This patch adds the GIC programming as part of the tegra_gic_setup()
which now takes an array of all the FIQ interrupts to be enabled for
the platform. The Tegra132 and Tegra210 platforms right now do not
register for any FIQ interrupts themselves, but will definitely use
this support in the future.

Change-Id: I0ea164be901cd6681167028fea0567399f18d4b8
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds a weak handler for early platform setup which
can be overriden by the soc-specific handlers to perform any
early setup tasks.

Change-Id: I1a7a98d59b2332a3030c6dca5a9b7be977177326
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

The BL2 fills in the UART controller ID to be used as the normal as
well as the crash console on Tegra platforms. The controller ID to
UART controller base address mapping is handled by each Tegra SoC
the base addresses might change across Tegra chips.

This patch adds the handler to parse the platform params to get the
UART ID for the per-soc handlers.

Change-Id: I4d167b20a59aaf52a31e2a8edf94d8d6f89598fa
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds another member, tzdram_base, to the plat_params_from_bl2 struct
in order to store the TZDRAM carveout base address used to load the Trusted OS.
The monitor programs the memory controller with the TZDRAM base and size in order
to deny any accesses from the NS world.

Change-Id: If39b8674d548175d7ccb6525c18d196ae8a8506c
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Replaced plat_get_syscnt_freq by plat_get_syscnt_freq2 on all
upstream platforms.

Change-Id: I3248f3f65a16dc5e9720012a05c35b9e3ba6abbe

This patch moves the definition for `plat_get_syscnt_freq()`
from arm_bl31_setup.c to arm_common.c. This could be useful
in case a delay timer needs to be installed based on the
generic timer in other BLs.
This patch also modifies the return type for this function
from `uint64_t` to `unsigned long long` within ARM and other
platform files.

Change-Id: Iccdfa811948e660d4fdcaae60ad1d700e4eda80d

The `plat/nvidia/tegra/include/tegra_private.h` file uses resources
from psci.h (for example, psci_power_state_t) but does not explicitly
include psci.h. This does not currently cause a problem since psci.h
is indirectly included via other headers. However, this may not be
the case in future.

This patch explicitly includes psci.h from tegra_private.h

Change-Id: Ia991147898dbd117c1d3496a95850995a5554c05

This patch modifies the Tegra port to support the new platform
APIs so that we can disable the compat layer. This includes
modifications to the power management and platform topology code.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch removes the bootargs pointer from the platform params
structure. Instead the bootargs are passed by the BL2 in the
bl32_ep_info struct which is a part of the EL3 params struct.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

The validate_power_state() handler checks the power_state for a valid afflvl
and state id. Although the afflvl check is common, the state ids are implementation
defined.

This patch moves the handler to the tegra/soc folder to allow each SoC to validate
the power_state for supported parameters.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch introduces the backend required for implementing the delay
timer API. Tegra has an on-chip free flowing us timer which can be
used as the delay timer.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds support to reserve a memory carveout region in the
DRAM on Tegra SoCs. The memory controller provides specific registers
to specify the aperture's base and size. This aperture can also be
changed dynamically in order to re-size the memory available for
DRM video playback. In case of the new aperture not overlapping
the previous one, the previous aperture has to be cleared before
setting up the new one. This means we do not "leak" any video data
to the NS world.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

T210 is the latest chip in the Tegra family of SoCs from NVIDIA. It is an
ARM v8 dual-cluster (A57/A53) SoC, with any one of the clusters being active
at a given point in time.

This patch adds support to boot the Trusted Firmware on T210 SoCs. The patch
also adds support to boot secondary CPUs, enter/exit core power states for
all CPUs in the slow/fast clusters. The support to switch between clusters
is still not available in this patch and would be available later.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This major change pulls out the common functionality from the
FVP and Juno platform ports into the following categories:

*   (include/)plat/common. Common platform porting functionality that
typically may be used by all platforms.

*   (include/)plat/arm/common. Common platform porting functionality
that may be used by all ARM standard platforms. This includes all
ARM development platforms like FVP and Juno but may also include
non-ARM-owned platforms.

*   (include/)plat/arm/board/common. Common platform porting
functionality for ARM development platforms at the board
(off SoC) level.

*   (include/)plat/arm/css/common. Common platform porting
functionality at the ARM Compute SubSystem (CSS) level. Juno
is an example of a CSS-based platform.

*   (include/)plat/arm/soc/common. Common platform porting
functionality at the ARM SoC level, which is not already defined
at the ARM CSS level.

No guarantees are made about the backward compatibility of
functionality provided in (include/)plat/arm.

Also remove any unnecessary variation between the ARM development
platform ports, including:

*   Unify the way BL2 passes `bl31_params_t` to BL3-1. Use the
Juno implementation, which copies the information from BL2 memory
instead of expecting it to persist in shared memory.

*   Unify the TZC configuration. There is no need to add a region
for SCP in Juno; it's enough to simply not allow any access to
this reserved region. Also set region 0 to provide no access by
default instead of assuming this is the case.

*   Unify the number of memory map regions required for ARM
development platforms, although the actual ranges mapped for each
platform may be different. For the FVP port, this reduces the
mapped peripheral address space.

These latter changes will only be observed when the platform ports
are migrated to use the new common platform code in subsequent
patches.

Change-Id: Id9c269dd3dc6e74533d0e5116fdd826d53946dc8