Skip to content

GitLab

Switch branch/tag
  1. 09 Jan, 2020 2 commits
  3. 03 Jan, 2020 1 commit
    • Vishnu Banavath's avatar
      drivers: add a driver for snoop control unit · c20c0525
      Vishnu Banavath authored 
      

The SCU connects one to four Cortex-A5/Cortex-A9 processors
to the memory system through the AXI interfaces.

The SCU functions are to:
- maintain data cache coherency between the Cortex-A5/Cortex-A9
  processors
- initiate L2 AXI memory accesses
- arbitrate between Cortex-A5/Cortex-A9 processors requesting
  L2 accesses
- manage ACP accesses.

Snoop Control Unit will enable to snoop on other CPUs caches.
This is very important when it comes to synchronizing data between
CPUs. As an example, there is a high chance that data might be
cache'd and other CPUs can't see the change. In such cases,
if snoop control unit is enabled, data is synchoronized immediately
between CPUs and the changes are visible to other CPUs.

This driver provides functionality to enable SCU as well as enabling
user to know the following
- number of CPUs present
- is a particular CPU operating in SMP mode or AMP mode
- data cache size of a particular CPU
- does SCU has ACP port
- is L2CPRESENT

Change-Id: I0d977970154fa60df57caf449200d471f02312a0
Signed-off-by: default avatarVishnu Banavath <vishnu.banavath@arm.com>
      c20c0525
  5. 29 Dec, 2019 1 commit
    • Samuel Holland's avatar
      bl31: Split into two separate memory regions · f8578e64
      Samuel Holland authored 
      

Some platforms are extremely memory constrained and must split BL31
between multiple non-contiguous areas in SRAM. Allow the NOBITS
sections (.bss, stacks, page tables, and coherent memory) to be placed
in a separate region of RAM from the loaded firmware image.

Because the NOBITS region may be at a lower address than the rest of
BL31, __RW_{START,END}__ and __BL31_{START,END}__ cannot include this
region, or el3_entrypoint_common would attempt to invalidate the dcache
for the entire address space. New symbols __NOBITS_{START,END}__ are
added when SEPARATE_NOBITS_REGION is enabled, and the dcached for the
NOBITS region is invalidated separately.
Signed-off-by: default avatarSamuel Holland <samuel@sholland.org>
Change-Id: Idedfec5e4dbee77e94f2fdd356e6ae6f4dc79d37
      f8578e64
  7. 23 Dec, 2019 2 commits
  9. 20 Dec, 2019 5 commits
    • Paul Beesley's avatar
      spm-mm: Remove mm_svc.h header · 962c44e7
      Paul Beesley authored 
      

The contents of this header have been merged into the spm_mm_svc.h
header file.

Change-Id: I01530b2e4ec1b4c091ce339758025e2216e740a4
Signed-off-by: default avatarPaul Beesley <paul.beesley@arm.com>
      962c44e7
    • Paul Beesley's avatar
      spm-mm: Refactor spm_svc.h and its contents · 0bf9f567
      Paul Beesley authored 
      

Change-Id: I91c192924433226b54d33e57d56d146c1c6df81b
Signed-off-by: default avatarPaul Beesley <paul.beesley@arm.com>
      0bf9f567
    • Paul Beesley's avatar
      spm-mm: Refactor secure_partition.h and its contents · aeaa225c
      Paul Beesley authored 
      

Before adding any new SPM-related components we should first do
some cleanup around the existing SPM-MM implementation. The aim
is to make sure that any SPM-MM components have names that clearly
indicate that they are MM-related. Otherwise, when adding new SPM
code, it could quickly become confusing as it would be unclear to
which component the code belongs.

The secure_partition.h header is a clear example of this, as the
name is generic so it could easily apply to any SPM-related code,
when it is in fact SPM-MM specific.

This patch renames the file and the two structures defined within
it, and then modifies any references in files that use the header.

Change-Id: I44bd95fab774c358178b3e81262a16da500fda26
Signed-off-by: default avatarPaul Beesley <paul.beesley@arm.com>
      aeaa225c
    • Paul Beesley's avatar
      spm: Remove SPM Alpha 1 prototype and support files · 538b0020
      Paul Beesley authored 
      

The Secure Partition Manager (SPM) prototype implementation is
being removed. This is preparatory work for putting in place a
dispatcher component that, in turn, enables partition managers
at S-EL2 / S-EL1.

This patch removes:

- The core service files (std_svc/spm)
- The Resource Descriptor headers (include/services)
- SPRT protocol support and service definitions
- SPCI protocol support and service definitions

Change-Id: Iaade6f6422eaf9a71187b1e2a4dffd7fb8766426
Signed-off-by: default avatarPaul Beesley <paul.beesley@arm.com>
Signed-off-by: default avatarArtsem Artsemenka <artsem.artsemenka@arm.com>
      538b0020
    • Paul Beesley's avatar
      Remove dependency between SPM_MM and ENABLE_SPM build flags · 3f3c341a
      Paul Beesley authored 
      

There are two different implementations of Secure Partition
management in TF-A. One is based on the "Management Mode" (MM)
design, the other is based on the Secure Partition Client Interface
(SPCI) specification. Currently there is a dependency between their
build flags that shouldn't exist, making further development
harder than it should be. This patch removes that
dependency, making the two flags function independently.

Before: ENABLE_SPM=1 is required for using either implementation.
        By default, the SPCI-based implementation is enabled and
        this is overridden if SPM_MM=1.

After: ENABLE_SPM=1 enables the SPCI-based implementation.
       SPM_MM=1 enables the MM-based implementation.
       The two build flags are mutually exclusive.

Note that the name of the ENABLE_SPM flag remains a bit
ambiguous - this will be improved in a subsequent patch. For this
patch the intention was to leave the name as-is so that it is
easier to track the changes that were made.

Change-Id: I8e64ee545d811c7000f27e8dc8ebb977d670608a
Signed-off-by: default avatarPaul Beesley <paul.beesley@arm.com>
      3f3c341a
  11. 18 Dec, 2019 1 commit
  13. 17 Dec, 2019 2 commits
  15. 16 Dec, 2019 1 commit
    • Bence Szépkúti's avatar
      libc: Fix SIZE_MAX on AArch32 · ae4a90f2
      Bence Szépkúti authored 
      

SIZE_MAX was mistakenly redefined from UINT32_MAX to UINT64_MAX
on AArch32 when the arch-specific headers were merged.

This value is not currently used by upstream TF-A source code,
so no functionality should be affected.

Change-Id: I2acf7f8736423697c7377e8ed4b08843ced26e66
Signed-off-by: default avatarBence Szépkúti <bence.szepkuti@arm.com>
      ae4a90f2
  17. 14 Dec, 2019 2 commits
    • Samuel Holland's avatar
      allwinner: Convert AXP803 regulator setup code into a driver · 0bc752c9
      Samuel Holland authored 
      

Previously, the A64/H5 and H6 platforms' PMIC setup code was entirely
independent. However, some H6 boards also need early regulator setup.

Most of the register interface and all of the device tree traversal code
can be reused between the AXP803 and AXP805. The main difference is the
hardware bus interface, so that part is left to the platforms. The
remainder is moved into a driver.

I factored out the bits that were obviously specific to the AXP803;
additional changes for compatibility with other PMICs can be made as
needed.

The only functional change is that rsb_init() now checks the PMIC's chip
ID register against the expected value. This was already being done in
the H6 version of the code.
Signed-off-by: default avatarSamuel Holland <samuel@sholland.org>
Change-Id: Icdcf9edd6565f78cccc503922405129ac27e08a2
      0bc752c9
    • Samuel Holland's avatar
      drivers: allwinner: axp: Add AXP805 support · f6d9c4ca
      Samuel Holland authored 
      

This adds the new regulator list, as well as changes to make the switch
(equivalent to DC1SW on the AXP803) work on both PMICs.
Signed-off-by: default avatarSamuel Holland <samuel@sholland.org>
Change-Id: I9a1eac8ddfc54b27096c10a8eebdd51aaf9b8311
      f6d9c4ca
  19. 12 Dec, 2019 1 commit
    • Manish Pandey's avatar
      PIE: make call to GDT relocation fixup generalized · da90359b
      Manish Pandey authored 
      When a Firmware is complied as Position Independent Executable it needs
to request GDT fixup by passing size of the memory region to
el3_entrypoint_common macro.
The Global descriptor table fixup will be done early on during cold boot
process of primary core.

Currently only BL31 supports PIE, but in future when BL2_AT_EL3 will be
compiled as PIE, it can simply pass fixup size to the common el3
entrypoint macro to fixup GDT.

The reason for this patch was to overcome the bug introduced by SHA
330ead80

 which called fixup routine for each core causing
re-initializing of global pointers thus overwriting any changes
done by the previous core.

Change-Id: I55c792cc3ea9e7eef34c2e4653afd04572c4f055
Signed-off-by: default avatarManish Pandey <manish.pandey2@arm.com>
      da90359b
  21. 11 Dec, 2019 2 commits
  23. 10 Dec, 2019 1 commit
    • Ambroise Vincent's avatar
      arm: gicv3: Fix compiler dependent behavior · d0196911
      Ambroise Vincent authored 
      

C99 standard: "What constitutes an access to an object that has
volatile-qualified type is implementation-defined".

GCC is not considering the cast to void of volatile structures as an
access and so is not actually issuing reads.

Clang does read those structures by copying them on the stack, which in
this case creates an overflow because of their large size.

This patch removes the cast to void and instead uses the USED attribute
to tell the compiler to retain the static variables.

Change-Id: I952b5056e3f6e91841e7ef9558434352710ab80d
Signed-off-by: default avatarAmbroise Vincent <ambroise.vincent@arm.com>
	       Zelalem Aweke <zelalem.aweke@arm.com>
      d0196911
  25. 09 Dec, 2019 1 commit
  27. 06 Dec, 2019 5 commits
  29. 26 Nov, 2019 1 commit
  31. 11 Nov, 2019 1 commit
  33. 07 Nov, 2019 1 commit
  35. 05 Nov, 2019 1 commit
  37. 11 Oct, 2019 1 commit
  39. 08 Oct, 2019 1 commit
  41. 07 Oct, 2019 1 commit
  43. 04 Oct, 2019 1 commit
    • laurenw-arm's avatar
      Neoverse N1 Errata Workaround 1542419 · 80942622
      laurenw-arm authored 
      

Coherent I-cache is causing a prefetch violation where when the core
executes an instruction that has recently been modified, the core might
fetch a stale instruction which violates the ordering of instruction
fetches.

The workaround includes an instruction sequence to implementation
defined registers to trap all EL0 IC IVAU instructions to EL3 and a trap
handler to execute a TLB inner-shareable invalidation to an arbitrary
address followed by a DSB.
Signed-off-by: default avatarLauren Wehrmeister <lauren.wehrmeister@arm.com>
Change-Id: Ic3b7cbb11cf2eaf9005523ef5578a372593ae4d6
      80942622
  45. 03 Oct, 2019 3 commits
  47. 02 Oct, 2019 2 commits