Skip to content

GitLab

Switch branch/tag
  1. 26 Mar, 2021 1 commit
    • Bharat Gooty's avatar
      driver: brcm: add i2c driver · 48c6a6b6
      Bharat Gooty authored 
      

Broadcom I2C controller driver. Follwoing API's are supported:-
- i2c_init() Intialize ethe I2C controller
- i2c_probe()
- i2c_set_bus_speed() Set the I2C bus speed
- i2c_get_bus_speed() Get the current bus speed
- i2c_recv_byte() Receive one byte of data.
- i2c_send_byte() Send one byteof data
- i2c_read_byte() Read single byte of data
- i2c_read() Read multiple bytes of data
- i2c_write_byte Write single byte of data
- i2c_write() Write multiple bytes of data

This driver is verified by reading the DDR SPD data.
Signed-off-by: default avatarBharat Gooty <bharat.gooty@broadcom.com>
Change-Id: I2d7fe53950e8b12fab19d0293020523ff8b74e13
      48c6a6b6
  3. 24 Mar, 2021 2 commits
  5. 08 Mar, 2021 1 commit
  7. 11 Feb, 2021 2 commits
  9. 09 Feb, 2021 1 commit
    • Heyi Guo's avatar
      tzc400: fix logical error in FILTER_BIT definitions · 3d66ca6d
      Heyi Guo authored 
      

The filters parameter passed to tzc400_configure_region() is supposed
to be filter bit flag without bit shift, so the macros
TZC_400_REGION_ATTR_FILTER_BIT and TZC_400_REGION_ATTR_FILTER_BIT_ALL
should always construct the value without any shift.

It is not a functional issue for TZC_REGION_ATTR_F_EN_SHIFT is lucky
to be 0.
Signed-off-by: default avatarHeyi Guo <guoheyi@linux.alibaba.com>
Change-Id: I5d363c462b8517256523f637e670eefa56722afd
      3d66ca6d
  11. 04 Feb, 2021 1 commit
  13. 20 Jan, 2021 1 commit
  15. 18 Jan, 2021 2 commits
    • Pali Rohár's avatar
      marvell: uart: a3720: Fix macro name for 6th bit of Status Register · b8e637f4
      Pali Rohár authored 
      

This patch does not change code, it only updates comments and macro name
for 6th bit of Status Register. So TF-A binary stay same.

6th bit of the Status Register is named TX EMPTY and is set to 1 when both
Transmitter Holding Register (THR) or Transmitter Shift Register (TSR) are
empty. It is when all characters were already transmitted.

There is also TX FIFO EMPTY bit in the Status Register which is set to 1
only when THR is empty.

In both console_a3700_core_init() and console_a3700_core_flush() functions
we should wait until both THR and TSR are empty therefore we should check
6th bit of the Status Register.

So current code is correct, just had misleading macro names and comments.
This change fixes this "documentation" issue, fixes macro name for 6th bit
of the Status Register and also updates comments.
Signed-off-by: default avatarPali Rohár <pali@kernel.org>
Change-Id: I19e4e7f53a90bcfb318e6dd1b1249b6cbf81c4d3
      b8e637f4
    • Pali Rohár's avatar
      marvell: uart: a3720: Implement console_a3700_core_getc · 74867756
      Pali Rohár authored 
      

Implementation is simple, just check if there is a pending character in
RX FIFO via RXRDY bit of Status Register and if yes, read it from
UART_RX_REG register.
Signed-off-by: default avatarPali Rohár <pali@kernel.org>
Change-Id: I226b6e336f44f5d0ca8dcb68e49a68e8f2f49708
      74867756
  17. 11 Jan, 2021 1 commit
    • Michal Simek's avatar
      cadence: Change logic in uart driver · 0b3d4273
      Michal Simek authored 
      

Write char if fifo is empty. If this is done like this all chars are
printed. Because origin code just put that chars to fifo and in case of
reset messages were missing.

Before this change chars are put to fifo and only check before adding if
fifo is full. The patch is changing this logic that it is adding char only
when fifo is empty to make sure that in case of reset (by another SW for
example) all chars are printed. Maybe one char can be missed but for IP
itself it is much easier to send just one char compare to full fifo.
Signed-off-by: default avatarMichal Simek <michal.simek@xilinx.com>
Change-Id: Ic24c2c1252bce24be2aed68ee29477ca4a549e5f
      0b3d4273
  19. 14 Dec, 2020 1 commit
  21. 13 Oct, 2020 1 commit
  23. 12 Oct, 2020 1 commit
  25. 09 Oct, 2020 1 commit
    • Jimmy Brisson's avatar
      Don't return error information from console_flush · 831b0e98
      Jimmy Brisson authored 
      

And from crash_console_flush.

We ignore the error information return by console_flush in _every_
place where we call it, and casting the return type to void does not
work around the MISRA violation that this causes. Instead, we collect
the error information from the driver (to avoid changing that API), and
don't return it to the caller.

Change-Id: I1e35afe01764d5c8f0efd04f8949d333ffb688c1
Signed-off-by: default avatarJimmy Brisson <jimmy.brisson@arm.com>
      831b0e98
  27. 01 Oct, 2020 1 commit
  29. 29 Sep, 2020 1 commit
    • Andre Przywara's avatar
      drivers: arm: gicv3: Allow detecting number of cores · 79d89e3d
      Andre Przywara authored 
      

A GICv3 interrupt controller will be instantiated for a certain number
of cores. This will result in the respective number of GICR frames. The
last frame will have the "Last" bit set in its GICR_TYPER register.

For platforms with a topology unknown at build time (the Arm FPGAs, for
instance), we need to learn the number of used cores at runtime, to size
the GICR region in the devicetree accordingly.

Add a generic function that iterates over all GICR frames until it
encounters one with the "Last" bit set. It returns the number of cores
the GICv3 has been configured for.

Change-Id: I79f033c50dfc1c275aba7122725868811abcc4f8
Signed-off-by: default avatarAndre Przywara <andre.przywara@arm.com>
      79d89e3d
  31. 24 Sep, 2020 2 commits
  33. 22 Sep, 2020 1 commit
  35. 15 Sep, 2020 1 commit
  37. 12 Aug, 2020 1 commit
    • Manish Pandey's avatar
      dualroot: add chain of trust for Platform owned SPs · 2947412d
      Manish Pandey authored 
      

For dualroot CoT there are two sets of SP certificates, one owned by
Silicon Provider(SiP) and other owned by Platform. Each certificate can
have a maximum of 4 SPs.

This patch reduces the number of SiP owned SPs from 8 to 4 and adds
the remaining 4 to Plat owned SP.
Plat owned SP certificate is signed using Platform RoT key and
protected against anti-rollback using the Non-trusted Non-volatile
counter.

Change-Id: Idc3ddd87d6d85a5506a7435f45a6ec17c4c50425
Signed-off-by: default avatarManish Pandey <manish.pandey2@arm.com>
      2947412d
  39. 11 Aug, 2020 1 commit
    • Stefan Chulski's avatar
      plat: marvell: ap807: implement workaround for errata-id 3033912 · 5e4c97d0
      Stefan Chulski authored 
      

ERRATA ID: RES-3033912 - Internal Address Space Init state causes
a hang upon accesses to [0xf070_0000, 0xf07f_ffff]
Workaround: Boot Firmware (ATF) should configure CCU_RGF_WIN(4) to
split [0x6e_0000, 0xff_ffff] to values [0x6e_0000, 0x6f_ffff] and
[0x80_0000, 0xff_ffff] that cause accesses to the segment of
[0xf070_0000, 0xf07f_ffff] to act as RAZWI. Reuse common
work-around code for both AP806 and AP807.

Change-Id: Ia91a4802d02917d1682faa0c81571093d1687d97
Signed-off-by: default avatarStefan Chulski <stefanc@marvell.com>
      5e4c97d0
  41. 31 Jul, 2020 1 commit
    • Manish Pandey's avatar
      tbbr/dualroot: rename SP package certificate file · 03a5225c
      Manish Pandey authored 
      

Currently only single signing domain is supported for SP packages but
there is plan to support dual signing domains if CoT is dualroot.

SP_CONTENT_CERT_ID is the certificate file which is currently generated
and signed with trusted world key which in-turn is derived from Silicon
provider RoT key.
To allow dual signing domain for SP packages, other certificate file
will be derived from Platform owned RoT key.

This patch renames "SP_CONTENT_CERT_ID" to "SIP_SP_CONTENT_CERT_ID" and
does other related changes.
Signed-off-by: default avatarManish Pandey <manish.pandey2@arm.com>
Change-Id: I0bc445a3ab257e2dac03faa64f46e36a9fed5e93
      03a5225c
  43. 30 Jul, 2020 1 commit
  45. 29 Jul, 2020 1 commit
  47. 27 Jul, 2020 1 commit
  49. 21 Jul, 2020 1 commit
  51. 10 Jul, 2020 1 commit
  53. 08 Jul, 2020 1 commit
  55. 24 Jun, 2020 2 commits
  57. 22 Jun, 2020 2 commits
    • Sandeep Tripathy's avatar
      TF-A GIC driver: Add barrier before eoi · 5eb16c47
      Sandeep Tripathy authored 
      

It is desired to have the peripheral writes completed to clear the
interrupt condition and de-assert the interrupt request to GIC before
EOI write. Failing which spurious interrupt will occurred.

A barrier is needed to ensure peripheral register write transfers are
complete before EOI is done.

GICv2 memory mapped DEVICE nGnR(n)E writes are ordered from core point
of view. However these writes may pass over different interconnects,
bridges, buffers leaving some rare chances for the actual write to
complete out of order.

GICv3 ICC EOI system register writes have no ordering against nGnR(n)E
memory writes as they are over different interfaces.

Hence a dsb can ensure from core no writes are issued before the previous
writes are *complete*.
Signed-off-by: default avatarSandeep Tripathy <sandeep.tripathy@broadcom.com>
Change-Id: Ie6362009e2f91955be99dca8ece14ade7b4811d6
      5eb16c47
    • Sheetal Tigadoli's avatar
      Fix typo in file Header guard · 49fe535b
      Sheetal Tigadoli authored 
      
Signed-off-by: default avatarSheetal Tigadoli <sheetal.tigadoli@broadcom.com>
Change-Id: Iaf6deaeee2069720518221157edbb052bc42850a
      49fe535b
  59. 19 Jun, 2020 3 commits
  61. 17 Jun, 2020 2 commits