GitLab

This patch updates wake time of the cpu to use the MSBs and zero
out the LSB's. Only 24 out of 32 bits are currently passed
through the PSCI interface. Previously all the LSB's were used.

Change-Id: Ie2d9d1bf6e3003dd47526a124f64e6ad555d2371
Signed-off-by: Krishna Sitaraman <ksitaraman@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

The TEGRA_ARI_COPY_MISCREG_AA64_RST ARI should be called with
request_lo/hi set to zero. MTS automatically takes the reset
vector from MISCREG_AA64_RST register and does not need it to
be passed as parameters.  This patch updates the API and the
caller function accordingly.

Change-Id: Ie3e3402d93951102239d988ca9f0cdf94f290d2f
Signed-off-by: Krishna Sitaraman <ksitaraman@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

When entering C7, ATF disables caches and flushes the L1 cache. However,
wake_time[cpu] can still remain in the L2 cache, causing later reads to it
to fetch from DRAM. This will read stale values.

Fix this by aligning wake_time[cpu] to cache lines, and explicitly cleaning it
before disabling caches.

Change-Id: Id73d095b479677595a6b3dd0abb240a1fef5f311
Signed-off-by: Mustafa Yigit Bilgen <mbilgen@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch updates the ARI header to version 3.0

Change-Id: I7cfe0c61c80a6b78625232135dd63393602d32fe
Signed-off-by: Krishna Sitaraman <ksitaraman@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

The TZRAM memory loses its state during "System Suspend". This patch
check if TZRAM base address contains valid data, to decide if the system
is exiting from "System Suspend". To enable TZDRAM encryption, the Memory
Controller's TZDRAM base/size registers would be populated by the BPMP
when the system "wakes up".

Change-Id: I5fc8ba1ae3bce12f0ece493f6f9f5f4d92a46344
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This change adds function to invoke for MISC_CCPLEX ARI calls and
the corresponding smc handler. This can be used to enable/disable
Coresight clock gating.

Change-Id: I4bc17aa478a46c29bfe17fd74f839a383ee2b644
Signed-off-by: Krishna Sitaraman <ksitaraman@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch fixes the incorrect return value that was being passed
back for the ENUM_FEATURES ARI call.

Change-Id: I3842c6ce27ea24698608830cf4c12cfa7ff64421
Signed-off-by: Krishna Sitaraman <ksitaraman@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch clears the unused or reserved ARI input registers
before issuing the actual ARI command.

Change-Id: I454b86566bfe088049a5c63527c1323d7b25248a
Signed-off-by: Krishna Sitaraman <ksitaraman@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch runs the MCE firmware's version check only if the underlying
platform has the capability to the run the firmware. MCE firmware is not
running on simulation platforms, identified by v0.3 or v0.6, read from the
Tegra Chip ID value.

Change-Id: I3b1788b1ee2a0d4464017bb879ac5792cb7022b8
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch uses helper functions to read the chips's major and minor
version values.

Change-Id: I5b2530a31af5ab3778a8aa63380def4e9f9ee6ec
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds all the UART controllers to the memory map.

Change-Id: I035e55ca7bff0a96115102f2295981f9e3a5da6b
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Commit f3d3b316

 replaced
plat_get_syscnt_freq by plat_get_syscnt_freq2 on all the
upstream platforms. This patch modifies the Tegra186 code
which is not present usptream, yet.

Change-Id: Ieda6168050a7769680a3a94513637fed03463a2d
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch disables TCU prefetch for all the contexts in order
to improve SMMU performance.

Change-Id: I82ca49a0e396d9f064f5c62a5f00c4b2101d8459
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch overrides the default handlers to get BL31 arguments from the
previous bootloader. The previous bootloader stores the pointer to the
arguments in PMC secure scratch register #53.

BL31 is the first component running on the CPU, as there isn't a previous
bootloader. We set the RESET_TO_BL31 flag to enable the path which assumes
that there are no input parameters passed by the previous bootloader.

Change-Id: Idacc1df292a70c9c1cb4d5c3a774bd796175d5e8
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch removes duplicate code from the platform's SiP handler
routine for processing Video Memory Carveout region requests and
uses the common SiP handler instead.

Change-Id: Ib307de017fd88d5ed3c816288327cae750a67806
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Commit c073fda1

 upstream changed the
return type for `plat_get_syscnt_freq()` from uint64_t to unsigned
long long.

This patch modifies the return type for the Tegra186 platform.

Change-Id: Ic9e5c364b90972265576e271582a4347e5eaa6eb
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch enables ECC and Parity Protection for Cortex-A57 CPUs during boot,
for Tegra186 A02p SKUs.

Change-Id: I8522a6cb61f5e4fa9e0471f558a0c3ee8078370e
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Uncore perfmon appears to the CPU as a set of uncore perfmon registers
which can be read and written using the ARI interface. The MCE code
sequence handles reads and writes to these registers by manipulating
the underlying T186 uncore hardware.

To access an uncore perfmon register, CPU software writes the ARI
request registers to specify

* whether the operation is a read or a write,
* which uncore perfmon register to access,
* the uncore perfmon unit, group, and counter number (if necessary),
* the data to write (if the operation is a write).

It then initiates an ARI request to run the uncore perfmon sequence in
the MCE and reads the resulting value of the uncore perfmon register
and any status information from the ARI response registers.

The NS world's MCE driver issues MCE_CMD_UNCORE_PERFMON_REQ command
for the EL3 layer to start the entire sequence. Once the request
completes, the NS world would receive the command status in the X0
register and the command data in the X1 register.

Change-Id: I20bf2eca2385f7c8baa81e9445617ae711ecceea
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch implements the `get_target_pwr_state` handler for Tegra186
SoCs. The SoC port uses this handler to find out the cluster/system
state during CPU_SUSPEND, CPU_OFF and SYSTEM_SUSPEND calls.

The MCE firmware controls the power state of the CPU/CLuster/System,
so we query it to get the state and act accordingly.

Change-Id: I86633d8d79aec7dcb405d2301ac69910f93110fe
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds a helper function to the MCE driver to allow its
clients to issue UPDATE_CSTATE_INFO requests, without having to
setup the CPU context struct.

We introduced a struct to encapsulate the request parameters, that
clients can pass on to the MCE driver. The MCE driver gets the
parameters from the struct and programs the hardware accordingly.

Change-Id: I02bce57506c4ccd90da82127805d6b564375cbf1
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch resets the CPU power state info when we online any CPU. The
NS world software would re-init the CPU power state after the CPU gets
online anyways. This allows us to maintain proper CPU/cluster power
states in the MCE firmware at all times.

Change-Id: Ib24054f53df720a4f88d67b2cb5a2e036e475e14
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch fixes the "Recursion in included headers" error flagged by
Coverity.

Fixes coverity errors "31858: Recursion in included headers" and
"31857: Recursion in included headers"

Change-Id: Icf8838434b1808b396e743e47f59adc452546364
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch resets the power state info for CPUs when onlining,
as we set deepest power when offlining a core but that may not
be requested by non-secure sw which controls idle states. It
will re-init this info from non-secure software when the core
come online.

Original change by Prashant Gaikwad <pgaikwad@nvidia.com>

Change-Id: Id6c2fa2b821c7705aafbb561a62348c36fd3abd8
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

The Tegra simulation environment has limited capabilities. This patch
checks the chip's major and minor versions to decide the features to
enable/disable - MCE firmware version checking is disabled and limited
Memory Controller settings are enabled

Change-Id: I258a807cc3b83cdff14a9975b4ab4f9d1a9d7dcf
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch checks that the system is running with the supported MCE
firmware during boot. In case the firmware version does not match the
interface header version, then the system halts.

Change-Id: Ib82013fd1c1668efd6f0e4f36cd3662d339ac076
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch fixes the programming sequence for 'System Suspend' and
'Quasi power down' state entry. The device needs to update the
required power state before querying the MCE firmware to see the
entry to that power state is allowed.

Original change by Allen Yu <alleny@nvidia.com>

Change-Id: I65e03754322188af913fabf41f29d1c3595afd85
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch programs the default CPU wake mask during CPU_SUSPEND. This
reduces the CPU_SUSPEND latency as the system has to send one less SMC
before issuing the actual suspend request.

Original change by Krishna Sitaraman <ksitaraman@nvidia.com>

Change-Id: I1f9351dde4ab30936070e9f42c2882fa691cbe46
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch clears the system cstate when offlining a CPU core as we
need to update the sytem cstate to SC7 only when we enter system
suspend.

Original change by Prashant Gaikwad <pgaikwad@nvidia.com>

Change-Id: I1cff9bbab4db7d390a491c8939aea5db6c6b5c59
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds a new interface to allow for making an ARI call that
will enable LATIC for the chip verification software harness.

LATIC allows some MINI ISMs to be read in the CCPLEX. The ISMs are
used for various measurements relevant ot particular locations in
Silicon. They are small counters which can be polled to determine
how fast a particular location in the Silicon is.

Original change by Guy Sotomayor <gsotomayor@nvidia.com>

Change-Id: Ifb49b8863a009d4cdd5d1ba38a23b5374500a4b3
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds support to save the BL31 state to the TZDRAM
before entering system suspend. The TZRAM loses state during
system suspend and so we need to copy the entire BL31 code to
TZDRAM before entering the state.

In order to restore the state on exiting system suspend, a new
CPU reset handler is implemented which gets copied to TZDRAM
during boot. TO keep things simple we use this same reset handler
for booting secondary CPUs too.

Change-Id: I770f799c255d22279b5cdb9b4d587d3a4c54fad7
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch reprograms MSS to make ROC deal with ordering of
MC traffic after boot and system suspend exit. This is needed
as device boots with MSS having all control but POR wants ROC
to deal with the ordering. Performance is expected to improve
with ROC but since no one has really tested the performance,
keep the option configurable for now by introducing a platform
level makefile variable.

Change-Id: I2e782fea138ccf9d281eb043a6b2c3bb97c839a7
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds the chip level support for System Suspend entry
and exit. As part of the entry sequence we first query the MCE
firmware to check if it is safe to enter system suspend. Once
we get a green light, we save hardware block settings and enter
the power state. As expected, all the hardware settings are
restored once we exit the power state.

Change-Id: I6d192d7568d6a555eb10efdfd45f6d79c20f74ea
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds a device driver for the SMMU hardware block on
Tegra186 SoCs. We use the generic ARM SMMU-500 IP block on
Tegra186. The driver only supports saving the SMMU settings
before entering system suspend. The MC driver and the NS world
clients take care of programming their own settings.

Change-Id: Iab5a90310ee10f6bc8745451ce50952ab3de7188
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds support for the SC8 system power off state. This
state keeps the sensor subsystem powered ON while powering down
the remaining parts of the SoC. The CPUs and DRAM are powered down
as part of this state entry and perform a cold boot when exiting SC8.

Change-Id: Iba65c661a7fe077a0d696f114bab3b4595e19a0d
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch disables the DCO operations when we turn OFF a
CPU. DCO operations are still ON when a CPU enters a power
down suspend state.

Change-Id: I954a800209ffcc9ab43a77f04040608cbbbd9055
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch registers all the FIQ interrupt sources during platform
setup. Currently we support AON and TOP watchdog timer interrupts.

Change-Id: Ibccd866f00d6b08b574f765538525f95b49c5549
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

The GPU is the real consumer of the video protected memory region
and it needs to be in reset to pick up the new region.

This patch checks if the GPU is in reset before we program the new
video protected memory region settings.

Change-Id: I44f553bfcf07b1975abad53b245954be966c8aeb
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch fixes the logic used to calculate the CPU index for
storing the per-cpu wake times. We use the MIDR register to
calculate the CPU index now. This allows us to store values for
Denver/A57 CPUs properly.

Change-Id: I9df0377afd4b92bbdaea495c0df06a9780a99d09
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch supports the TEGRA_SIP_NEW_VIDEOMEM_REGION SiP call to
program new video memory carveout settings from the NS world.

Change-Id: If9ed818fe71e6cb7461f225090105a4d8883b7a2
Signed-off-by: Wayne Lin <wlin@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds support for the C6 and C7 CPU_SUSPEND states. C6 is
an idle state while C7 is a powerdown state.

The MCE block takes care of the entry/exit to/from these core power
states and hence we call the corresponding MCE handler to process
these requests. The NS driver passes the tentative time that the
core is expected to stay in this state as part of the power_state
parameter, which we store in a per-cpu array and pass it to the
MCE block.

Change-Id: I152acb11ab93d91fb866da2129b1795843dfa39b
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>