GitLab

This patch fixes incompatibility issues that prevent building the cert_tool
with OpenSSL >= v1.1.0. The changes introduced are still backwards
compatible with OpenSSL v1.0.2.

Fixes arm-software/trusted-fw#521
Signed-off-by: Michalis Pappas <mpappas@fastmail.fm>

Using the OIDs defined in tbbr_oids.h is the recommended way to build
the cert_create tool. This patch hence sets default value of the build
flag USE_TBBR_DEFS to 1 in the Makefile in `tools/cert_create` folder
when cert_create is built from this folder.

Fixes ARM-software/tf-issues#482

Change-Id: Id1d224826b3417770bccbefa1b68d9bdb3b567f0
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

This patch enables choice of RSA version at run time to be used for
generating signatures by the cert_tool. The RSA PSS as defined in
PKCS#1 v2.1 becomes the default version and this patch enables to specify
the RSA PKCS#1 v1.5 algorithm to `cert_create` through the command line
-a option. Also, the build option `KEY_ALG` can be used to pass this
option from the build system. Please note that RSA PSS is mandated
by Trusted Board Boot requirements (TBBR) and legacy RSA support is
being added for compatibility reasons.

Fixes ARM-Software/tf-issues#499
Change-Id: Ifaa3f2f7c9b43f3d7b3effe2cde76bf6745a5d73
Co-Authored-By: Eleanor Bonnici <Eleanor.bonnici@arm.com>
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

Since Trusted OS firmware may have extra images, need to
assign new uuid and image id for them.
The TBBR chain of trust has been extended to add support
for the new images within the existing Trusted OS firmware
content certificate.

Change-Id: I678dac7ba1137e85c5779b05e0c4331134c10e06
Signed-off-by: Summer Qin <summer.qin@arm.com>

This fix modifies the order of system includes to meet the ARM TF coding
standard. There are some exceptions in order to retain header groupings,
minimise changes to imported headers, and where there are headers within
the #if and #ifndef statements.

Change-Id: I65085a142ba6a83792b26efb47df1329153f1624
Signed-off-by: Isla Mitchell <isla.mitchell@arm.com>

When V is set from the command line, the value is passed to the tools'
Makefiles as well.

Change-Id: I91a1f66de5c1ae6f36b6c9f0a9bd550d4a30f092
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

This patch modifies the `cert_create` tool to use RSASSA-PSS scheme for
signing the certificates. This is compliant with RSA PKCS_2_1 standard as
mandated by TBBR.

Note that the certificates generated by using cert_create tool after this
patch can be authenticated during TBB only if the corresponding mbedtls
driver in ARM Trusted Firmware has the corresponding support.

Change-Id: If224f41c76b3c4765ae2af5259e67f73602818a4
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

Tools are built using the compiler specified in `HOSTCC` instead of
reusing the `CC` variable.  By default, gcc is used.

Change-Id: I83636a375c61f4804b4e80784db9d061fe20af87
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

Platforms aligned with TBBR are supposed to use their own OIDs, but
defining the same macros with different OIDs does not provide any
value (at least technically).

For easier use of TBBR, this commit allows platforms to reuse the OIDs
obtained by ARM Ltd.  This will be useful for non-ARM vendors that
do not need their own extension fields in their certificate files.

The OIDs of ARM Ltd. have been moved to include/tools_share/tbbr_oid.h

Platforms can include <tbbr_oid.h> instead of <platform_oid.h> by
defining USE_TBBR_DEFS as 1.  USE_TBBR_DEFS is 0 by default to keep the
backward compatibility.

For clarification, I inserted a blank line between headers from the
include/ directory (#include <...>) and ones from a local directory
(#include "..." ).
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

To make software license auditing simpler, use SPDX[0] license
identifiers instead of duplicating the license text in every file.

NOTE: Files that have been imported by FreeBSD have not been modified.

[0]: https://spdx.org/



Change-Id: I80a00e1f641b8cc075ca5a95b10607ed9ed8761a
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

cppcheck highlighted variables that were initialized but then later
reassigned.

Change-Id: Ie12742c01fd3bf48b2d6c05a3b448da91d57a2e4
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

These variables store return values of functions.  Remove all of
meaningless initializers.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

The ext_new_nvcounter() function calls i2d_ASN1_INTEGER() twice;
the first call to get the return value "sz", and the second one
for writing data into the buffer.  This is actually redundant.
We can do both by one function call.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

In the current code, both key_load() and key_create() call key_new()
to allocate a key container (and they do not free it even if they
fail).  If a specific key is not given by the command option,
key_load() fails, then key_create() is called.  At this point, the
key container that has been allocated in key_load() is still alive,
and it is overwritten by a new key container created by key_create().

Move the key_new() call to the main() function to make sure it is
called just once for each descriptor.

While we are here, let's fix one more bug; the error handling code
  ERROR("Malloc error while loading '%s'\n", keys[i].fn);
is wrong because keys[i].fn is NULL pointer unless a specific key is
given by the command option.  This code could be run in either case.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

With the introduction of commit `96103d5a`, the Certificate
Generation tool is not able to generate FWU certificate and
while doing so it does segmentation fault.

This happens because it is now required to pass non-volatile
counter values to the `cert_create` tool from the command line
for creating the trusted firmware certificates.

But in case of creating FWU certificate these counter values are not
being passed to the tool and as a consequence the `cert_create` tool
try to use the NULL argument and errors out with Segmentation fault.

This patch fixes this issue by providing a check before using the
command line argument passed in the case of `EXT_TYPE_NVCOUNTER`
certificate extension.

Change-Id: Ie17d0c1502b52aaa8500f3659c2da2448ab0347a

In some build environments executable programs have a specific file
extension.  The value of BIN_EXT is appended to the relevant tool file
names to allow for this.
The value of BIN_EXT is set, where appropriate, by the build environment
specific make helper (to .exe for Windows build environments).

.gitignore is updated to hide the new (.exe) files.

Change-Id: Icc32f64b750e425265075ad4e0dea18129640b86

Add make helper files to select the appropriate settings for the build
environment. Selection is made in make_helpers/build_env.mk, which
selects other files to include using generic build environment settings.
The Trusted Firmware Makefile and supporting tool Makefiles are updated
to include build_env.mk instead of unix.mk.

NOTE: This change does not fully enable builds in other build
      environments. It facilitates this without compromising the
      existing build environments.

Change-Id: Ic4064ffe6ce158bbd16d7cc9f27dd4655a3580f6

Macros are inserted to replace direct invocations of commands that are
problematic on some build environments. (e.g. Some environments expect
\ in paths instead of /.)
The changes take into account mismatched command mappings across
environments.
The new helper file unix.mk retains existing makefile behaviour on unix
like build environments by providing the following macro definitions:
  SHELL_COPY        cp -f
  SHELL_COPY_TREE   cp -rf
  SHELL_DELETE      rm -f
  SHELL_DELETE_ALL  rm -rf
  MAKE_PREREQ_DIR   mkdir -p  (As make target)
  SHELL_REMOVE_DIR  rm -rf

Change-Id: I1b5ca5e1208e78230b15284c4af00c1c006cffcb

Update the cert_create Makefile to list realclean as .PHONY
(like clean)

Change-Id: I9dc8a61a11574a044372e0952b5b12b74e133747

As an initial stage of making Trusted Firmware build environment more
portable, we remove most uses of the $(shell ) function and replace them
with more portable make function based solutions.

Note that the setting of BUILD_STRING still uses $(shell ) since it's
not possible to reimplement this as a make function. Avoiding invocation
of this on incompatible host platforms will be implemented separately.

Change-Id: I768e2f9a265c78814a4adf2edee4cc46cda0f5b8

This patch adds non-volatile counter support to the Certificate
Generation tool. The TBBR Chain of Trust definition in the tool
has been extended to include the counters as certificate extensions.
The counter values can be specified in the command line.

The following default counter values are specified in the build
system:

  * Trusted FW Non-Volatile counter = 0
  * Non-Trusted FW Non-Volatile counter = 0

These values can be overridden by the platform at build time.

Change-Id: I7ea10ee78d72748d181df4ee78a7169b3ef2720c

The help message printed by the cert_create tool using the command
line option -h (or --help) does not correctly list all the available
command line options.

This patch reworks the print_help() function to print the help
messages in a data driven approach. For each command line option
registered, an optional help message can be specified, which will
be printed by print_help().

Help messages for the TBBR options (certificates, keys and images)
are also provided.

Fix a small bug in the short options string passed to getopt_long:
the ':' was missing in the '-a' option (this option must take an
argument).

Fixes ARM-software/tf-issues#337

Change-Id: I9d08c2dfd349022808fcc884724f677eefdc1452

By default ARM TF is built with the '-pedantic' compiler flag, which
helps detecting violations of the C standard. However, the mbed TLS
library and its associated authentication module in TF used to fail
building with this compiler flag. As a workaround, the mbed TLS
authentication module makefile used to set the 'DISABLE_PEDANTIC'
TF build flag.

The compiler errors flagged by '-pedantic' in the mbed TLS library
have been fixed between versions 1.3.9 and 2.2.0 and the library now
properly builds with this compiler flag.

This patch fixes the remaining compiler errors in the mbed TLS
authentication module in TF and unsets the 'DISABLE_PEDANTIC' TF
build flag. This means that TF is now always built with '-pedantic'.

In particular, this patch:

 * Removes the final semi-colon in REGISTER_COT() macro.

   This semi-colon was causing the following error message:

   drivers/auth/tbbr/tbbr_cot.c:544:23: error: ISO C does not allow
   extra ';' outside of a function [-Werror=pedantic]

   This has been fixed both in the mbed TLS authentication module
   as well as in the certificate generation tool. Note that the latter
   code didn't need fixing since it is not built with '-pedantic' but
   the change has been propagated for consistency.

   Also fixed the REGISTER_KEYS() and REGISTER_EXTENSIONS() macros,
   which were suffering from the same issue.

 * Fixes a pointer type.

   It was causing the following error message:

   drivers/auth/mbedtls/mbedtls_crypto.c: In function 'verify_hash':
   drivers/auth/mbedtls/mbedtls_crypto.c:177:42: error: pointer of
   type 'void *' used in arithmetic [-Werror=pointer-arith]

Change-Id: I7b7a04ef711efd65e17b5be26990d1a0d940257d

This patch replaces all references to the SCP Firmware (BL0, BL30,
BL3-0, bl30) with the image terminology detailed in the TF wiki
(https://github.com/ARM-software/arm-trusted-firmware/wiki):

    BL0          -->  SCP_BL1
    BL30, BL3-0  -->  SCP_BL2
    bl30         -->  scp_bl2

This change affects code, documentation, build system, tools and
platform ports that load SCP firmware. ARM plaforms have been
updated to the new porting API.

IMPORTANT: build option to specify the SCP FW image has changed:

    BL30 --> SCP_BL2

IMPORTANT: This patch breaks compatibility for platforms that use BL2
to load SCP firmware. Affected platforms must be updated as follows:

    BL30_IMAGE_ID --> SCP_BL2_IMAGE_ID
    BL30_BASE --> SCP_BL2_BASE
    bl2_plat_get_bl30_meminfo() --> bl2_plat_get_scp_bl2_meminfo()
    bl2_plat_handle_bl30() --> bl2_plat_handle_scp_bl2()

Change-Id: I24c4c1a4f0e4b9f17c9e4929da815c4069549e58

This patch applies the TBBR naming convention to the certificates
and the corresponding extensions defined by the CoT:

    * Certificate UUID names
    * Certificate identifier names
    * OID names

Changes apply to:

    * Generic code (variables and defines)
    * The default certificate identifiers provided in the generic
      code
    * Build system
    * ARM platforms port
    * cert_create tool internal definitions
    * fip_create and cert_create tools command line options
    * Documentation

IMPORTANT: this change breaks the compatibility with platforms
that use TBBR. The platform will need to adapt the identifiers
and OIDs to the TBBR naming convention introduced by this patch:

Certificate UUIDs:

    UUID_TRUSTED_BOOT_FIRMWARE_BL2_CERT --> UUID_TRUSTED_BOOT_FW_CERT
    UUID_SCP_FIRMWARE_BL30_KEY_CERT --> UUID_SCP_FW_KEY_CERT
    UUID_SCP_FIRMWARE_BL30_CERT --> UUID_SCP_FW_CONTENT_CERT
    UUID_EL3_RUNTIME_FIRMWARE_BL31_KEY_CERT --> UUID_SOC_FW_KEY_CERT
    UUID_EL3_RUNTIME_FIRMWARE_BL31_CERT --> UUID_SOC_FW_CONTENT_CERT
    UUID_SECURE_PAYLOAD_BL32_KEY_CERT --> UUID_TRUSTED_OS_FW_KEY_CERT
    UUID_SECURE_PAYLOAD_BL32_CERT --> UUID_TRUSTED_OS_FW_CONTENT_CERT
    UUID_NON_TRUSTED_FIRMWARE_BL33_KEY_CERT --> UUID_NON_TRUSTED_FW_KEY_CERT
    UUID_NON_TRUSTED_FIRMWARE_BL33_CERT --> UUID_NON_TRUSTED_FW_CONTENT_CERT

Certificate identifiers:

    BL2_CERT_ID --> TRUSTED_BOOT_FW_CERT_ID
    BL30_KEY_CERT_ID --> SCP_FW_KEY_CERT_ID
    BL30_CERT_ID --> SCP_FW_CONTENT_CERT_ID
    BL31_KEY_CERT_ID --> SOC_FW_KEY_CERT_ID
    BL31_CERT_ID --> SOC_FW_CONTENT_CERT_ID
    BL32_KEY_CERT_ID --> TRUSTED_OS_FW_KEY_CERT_ID
    BL32_CERT_ID --> TRUSTED_OS_FW_CONTENT_CERT_ID
    BL33_KEY_CERT_ID --> NON_TRUSTED_FW_KEY_CERT_ID
    BL33_CERT_ID --> NON_TRUSTED_FW_CONTENT_CERT_ID

OIDs:

    TZ_FW_NVCOUNTER_OID --> TRUSTED_FW_NVCOUNTER_OID
    NTZ_FW_NVCOUNTER_OID --> NON_TRUSTED_FW_NVCOUNTER_OID
    BL2_HASH_OID --> TRUSTED_BOOT_FW_HASH_OID
    TZ_WORLD_PK_OID --> TRUSTED_WORLD_PK_OID
    NTZ_WORLD_PK_OID --> NON_TRUSTED_WORLD_PK_OID
    BL30_CONTENT_CERT_PK_OID --> SCP_FW_CONTENT_CERT_PK_OID
    BL30_HASH_OID --> SCP_FW_HASH_OID
    BL31_CONTENT_CERT_PK_OID --> SOC_FW_CONTENT_CERT_PK_OID
    BL31_HASH_OID --> SOC_AP_FW_HASH_OID
    BL32_CONTENT_CERT_PK_OID --> TRUSTED_OS_FW_CONTENT_CERT_PK_OID
    BL32_HASH_OID --> TRUSTED_OS_FW_HASH_OID
    BL33_CONTENT_CERT_PK_OID --> NON_TRUSTED_FW_CONTENT_CERT_PK_OID
    BL33_HASH_OID --> NON_TRUSTED_WORLD_BOOTLOADER_HASH_OID
    BL2U_HASH_OID --> AP_FWU_CFG_HASH_OID
    SCP_BL2U_HASH_OID --> SCP_FWU_CFG_HASH_OID
    NS_BL2U_HASH_OID --> FWU_HASH_OID

Change-Id: I1e047ae046299ca913911c39ac3a6e123bd41079

Firmware Update requires an X509v3 certificate which contains
hashes for SCP_BL2U, BL2U and NS_BL2U images as extensions.

This patch extends the Chain of Trust definition in the
'cert_create' tool to include the Firmware Update certificate
and the required extensions (including command line options).
A new field in the extension structure will be used to indicate
that the extension is optional. In the case of an image hash
extension, this field will tell the tool that the hash should
be included in the certificate, but filled with zeros.

Change-Id: I1f77a66b018826b71745910771f38d9cf6050388

This patch introduces a new API that allows to specify command
line options in the Chain of Trust description. These command line
options may be used to specify parameters related to the CoT (i.e.
keys or certificates), instead of keeping a hardcoded list of
options in main.c.

Change-Id: I282b0b01cb9add557b26bddc238a28253ce05e44

The certificate generation tool currently checks if all command
line options required to create all certificates in the CoT have
been specified. This prevents using the tool to create individual
certificates when the whole CoT is not required.

This patch improves the checking function so only those options
required by the certificates specified in the command line are
verified.

Change-Id: I2c426a8e2e2dec85b15f2d98fd4ba949c1aed385

This patch reworks the certificate generation tool to follow a data
driven approach. The user may specify at build time the certificates,
keys and extensions defined in the CoT, register them using the
appropiate macros and the tool will take care of creating the
certificates corresponding to the CoT specified.

Change-Id: I29950b39343c3e1b71718fce0e77dcf2a9a0be2f

Some Linux distributions include an OpenSSL library which has been
built without ECDSA support. Trying to build the certificate
generation tool on those distributions will result in a build error.

This patch fixes that issue by including ECDSA support only if
OpenSSL has been built with ECDSA. In that case, the OpenSSL
configuration file does not define the OPENSSL_NO_EC macro. The tool
will build successfully, although the resulting binary will not
support ECDSA keys.

Change-Id: I4627d1abd19eef7ad3251997d8218599187eb902

This patch extends the 'cert_create' tool to support ECDSA keys
to sign the certificates. The '--key-alg' command line option
can be used to specify the key algorithm when invoking the tool.
Available options are:

    * 'rsa': create RSA-2048 keys (default option)
    * 'ecdsa': create ECDSA-SECP256R1 keys

The TF Makefile has been updated to allow the platform to specify
the key algorithm by declaring the 'KEY_ALG' variable in the
platform makefile.

The behaviour regarding key management has changed. After applying
this patch, the tool will try first to open the keys from disk. If
one key does not exist or no key is specified, and the command line
option to create keys has been specified, new keys will be created.
Otherwise an error will be generated and the tool will exit. This
way, the user may specify certain keys while the tool will create
the remaining ones. This feature is useful for testing purposes
and CI infrastructures.

The OpenSSL directory may be specified using the build option
'OPENSSL_DIR' when building the certificate generation tool.
Default is '/usr'.

Change-Id: I98bcc2bfab28dd7179f17f1177ea7a65698df4e7

The cert_create tool calculates the hash of each BL image and includes
it as an ASN.1 OCTET STRING in the corresponding certificate extension.
Without additional information, the firmware running on the platform
has to know in advance the algorithm used to generate the hash.

This patch modifies the cert_create tool so the certificate extensions
that include an image hash are generated according to the following
ASN.1 structure:

    DigestInfo ::= SEQUENCE {
        digestAlgorithm  AlgorithmIdentifier,
        digest           OCTET STRING
    }

    AlgorithmIdentifier ::=  SEQUENCE  {
        algorithm        OBJECT IDENTIFIER,
        parameters       ANY DEFINED BY algorithm OPTIONAL
    }

The PolarSSL module has been updated to extract the image hash
from the certificate extension according to this structure.

Change-Id: I6d83430f12a8a0eea8447bec7c936e903f644c85

Update the top level makefile to allow platform ports to exist in
subdirectories at any level instead of one level under `plat/`. The
makefile recursively searches for all files called `platform.mk` in
all subdirectories of `plat/`. The directory containing
`platform.mk` is the platform name. Platform names must be unique
across the codebase.

Replace usage of HELP_PLATFORMS in the Makefile with PLATFORMS since
these are both used to report the same information back to the user.

Update the TSP and cert_create tool makefiles in a similar way
to support a deeper platform port directory structure.

Also add PLAT_<plat_name> as a define passed through the top level
makefile to the source files, to allow build time variation in common
platform code.

Change-Id: I213420164808c5ddb99a26144e8e3f141a7417b7

This patch replaces SHA1 by SHA256 in the 'cert_create' tool, so
certificate signatures are generated according to the NSA Suite B
cryptographic algorithm requirements.

Documentation updated accordingly.

Change-Id: I7be79e6b2b62dac8dc78a4f4f5006e37686bccf6

This patch adds a tool that generates all the necessary elements
to establish the chain of trust (CoT) between the images.

The tool reads the binary images and signing keys and outputs the
corresponding certificates that will be used by the target at run
time to verify the authenticity of the images.

Note: the platform port must provide the file platform_oid.h. This
file will define the OIDs of the x509 extensions that will be added
to the certificates in order to establish the CoT.

Change-Id: I2734d6808b964a2107ab3a4805110698066a04be