Skip to content

GitLab

Switch branch/tag
  1. 11 Oct, 2018 1 commit
  3. 10 Oct, 2018 1 commit
    • Girish Pathak's avatar
      plat/arm/css/sgm: Reorder early platform init · 2879b5c1
      Girish Pathak authored 
      

In the function, bl1_early_platform_setup in the file
plat/arm/css/sgm/sgm_bl1_setup.c:

  plat_config_init();

  arm_bl1_early_platform_setup();

The debug messages logged by plat_config_init() are lost because
the console is initialized in the function
arm_bl1_early_platform_setup()

To see the logs of plat_config_init, this fix re-orders above calls
so that the console is initialized before call to plat_config_init.

Change-Id: I2e98f1f67c591cca24e28905acd0838ea3697a7c
Signed-off-by: default avatarGirish Pathak <girish.pathak@arm.com>
      2879b5c1
  5. 09 Oct, 2018 1 commit
  7. 03 Oct, 2018 4 commits
  9. 02 Oct, 2018 1 commit
    • Antonio Nino Diaz's avatar
      plat/arm: Remove option ARM_BOARD_OPTIMISE_MEM · c0740e4f
      Antonio Nino Diaz authored 
      

This option makes it hard to optimize the memory definitions of all Arm
platforms because any change in the common defines must work in all of
them. The best thing to do is to remove it and move the definition to
each platform's header.

FVP, SGI and SGM were using the definitions in board_arm_def.h. The
definitions have been copied to each platform's platform_def.h. Juno
was already using the ones in platform_def.h, so there have been no
changes.

Change-Id: I9aecd11bbc72a3d0d7aad1ef9934d8df21dcfaf2
Signed-off-by: default avatarAntonio Nino Diaz <antonio.ninodiaz@arm.com>
      c0740e4f
  11. 28 Sep, 2018 3 commits
  13. 26 Sep, 2018 1 commit
  15. 24 Sep, 2018 1 commit
  17. 21 Sep, 2018 2 commits
  19. 18 Sep, 2018 1 commit
  21. 10 Sep, 2018 1 commit
  23. 07 Sep, 2018 5 commits
    • Sathees Balya's avatar
      juno: Revert FWU update detect mechanism · 4da6f6cd
      Sathees Balya authored 
      The patch 7b56928a

 unified the FWU mechanism on FVP and Juno
platforms due to issues with MCC firmware not preserving the
NVFLAGS. With MCCv150 firmware, this issue is resolved. Also
writing to the NOR flash while executing from the same flash
in Bypass mode had some stability issues. Hence, since the
MCC firmware issue is resolved, this patch reverts to the
NVFLAGS mechanism to detect FWU. Also, with the introduction
of SDS (Shared Data Structure) by the SCP, the reset syndrome
needs to queried from the appropriate SDS field.

Change-Id: If9c08f1afaaa4fcf197f3186887068103855f554
Signed-off-by: default avatarSathees Balya <sathees.balya@arm.com>
Signed-off-by: default avatarSoby Mathew <Soby.Mathew@arm.com>
      4da6f6cd
    • Alexei Fedorov's avatar
      ARM Platforms:Enable non-secure access to UART1 · 2431d00f
      Alexei Fedorov authored 
      

Adds an undocumented build option that enables non-secure access to
the PL011 UART1.
This allows a custom build where the UART can be used as a serial debug
port for WinDbg (or other debugger) connection.

This option is not documented in the user guide, as it is provided as a
convenience for Windows debugging, and not intended for general use.
In particular, enabling non-secure access to the UART might allow
a denial of service attack!

Change-Id: I4cd7d59c2cac897cc654ab5e1188ff031114ed3c
Signed-off-by: default avatarAlexei Fedorov <Alexei.Fedorov@arm.com>
Signed-off-by: default avatarEvan Lloyd <evan.lloyd@arm.com>
      2431d00f
    • John Tsichritzis's avatar
      Add cache flush after BL1 writes heap info to DTB · 63cc2658
      John Tsichritzis authored 
      

A cache flush is added in BL1, in Mbed TLS shared heap code. Thus, we
ensure that the heap info written to the DTB always gets written back to
memory.  Hence, sharing this info with other images is guaranteed.

Change-Id: I0faada31fe7a83854cd5e2cf277ba519e3f050d5
Signed-off-by: default avatarJohn Tsichritzis <john.tsichritzis@arm.com>
      63cc2658
    • John Tsichritzis's avatar
      Additional runtime check for DTB presence in BL2 · a606031e
      John Tsichritzis authored 
      

In Mbed TLS shared heap code, an additional sanity check is introduced
in BL2. Currently, when BL2 shares heap with BL1, it expects the heap
info to be found in the DTB. If for any reason the DTB is missing, BL2
cannot have the heap address and, hence, Mbed TLS cannot proceed. So,
BL2 cannot continue executing and it will eventually crash.  With this
change we ensure that if the DTB is missing BL2 will panic() instead of
having an unpredictable crash.

Change-Id: I3045ae43e54b7fe53f23e7c2d4d00e3477b6a446
Signed-off-by: default avatarJohn Tsichritzis <john.tsichritzis@arm.com>
      a606031e
    • John Tsichritzis's avatar
      Slight improvements in Mbed TLS shared heap helpers · 7af2dd2e
      John Tsichritzis authored 
      

This patch, firstly, makes the error messages consistent to how printed
strings are usually formatted. Secondly, it removes an unnecessary #if
directive.

Change-Id: Idbb8ef0070562634766b683ac65f8160c9d109e6
Signed-off-by: default avatarJohn Tsichritzis <john.tsichritzis@arm.com>
      7af2dd2e
  25. 04 Sep, 2018 3 commits
  27. 30 Aug, 2018 2 commits
  29. 23 Aug, 2018 1 commit
  31. 22 Aug, 2018 1 commit
  33. 21 Aug, 2018 1 commit
  35. 20 Aug, 2018 1 commit
  37. 10 Aug, 2018 1 commit
  39. 06 Aug, 2018 1 commit
  41. 03 Aug, 2018 7 commits