- 12 Dec, 2017 1 commit
-
-
Victor Chong authored
Per https://github.com/sdrobertw/Poplar/blob/master/HardwareDocs/Processor_Datasheet_v2XX.pdf there are 13 groups of GPIO controllers, not 12. Signed-off-by:
Victor Chong <victor.chong@linaro.org>
-
- 14 Jul, 2017 1 commit
-
-
Jorge Ramirez-Ortiz authored
The board features the Hi3798C V200 with an integrated quad-core 64-bit ARM Cortex A53 processor and high performance Mali T720 GPU, making it capable of running any commercial set-top solution based on Linux or Android. Its high performance specification also supports a premium user experience with up to H.265 HEVC decoding of 4K video at 60 frames per second. SOC Hisilicon Hi3798CV200 CPU Quad-core ARM Cortex-A53 64 bit DRAM DDR3/3L/4 SDRAM interface, maximum 32-bit data width 2 GB USB Two USB 2.0 ports One USB 3.0 ports CONSOLE USB-micro port for console support ETHERNET 1 GBe Ethernet PCIE One PCIe 2.0 interfaces JTAG 8-Pin JTAG EXPANSION INTERFACE Linaro 96Boards Low Speed Expansion slot DIMENSION Standard 160×120 mm 96Boards Enterprice Edition form factor WIFI 802.11AC 2*2 with Bluetooth CONNECTORS One connector for Smart Card One connector for TSI The platform boot sequence is as follows: l-loader --> arm_trusted_firmware --> u-boot Repositories: - https://github.com/Linaro/poplar-l-loader.git - https://github.com/Linaro/poplar-u-boot.git U-Boot is also upstream in the project's master branch. Make sure you are using the correct branch on each one of these repositories. The definition of "correct" might change over time (at this moment in time this would be the "latest" branch). Build Line: make CROSS_COMPILE=aarch64-linux-gnu- all fip SPD=none DEBUG=1 PLAT=poplar BL33=/path/to/u-boot.bin Signed-off-by:Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Signed-off-by:
Leo Yan <leo.yan@linaro.org> Signed-off-by:
Alex Elder <elder@linaro.org> Tested-by:
-
