GitLab

Some build variables have already defined in common
make helper file, use them directly.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I7fe6331160bfdf315924d4498d78b0a399eb2e89

Add macro of SUPPORTED_BOOT_MODE for board lx2160ardb, lx2160aqds,
lx2162aqds.
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I4451ca030eca79c9bc5fee928eec497a7f0e878c

1. Added the build macro "add_boot_mode_define".
2. Use the macro to validate current BOOT_MODE against the
   pre-determined list of SUPPORTED_BOOT_MODE, so each platform
   need to define the list: SUPPORTED_BOOT_MODE.
3. Reports error if BOOT_MODE is not in SUPPORTED_BOOT_MODE list,
   or BOOT_MODE is not supported yet althoug it is in SUPPORTED_BOOT_MODE.
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I29be60ecdb19fbec1cd162e327cdfb30ba629b07

Move some soc make variables to new soc_common_def.mk,
then it can be reused by other platforms.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: Ia30bd332c95b6475f1cfee2f03a8ed3892a9568d

Use common code in common file to configure platform.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I72fe22751f12b8a4996a7b9f75fae4c912ea86de

Move some common make variables to new plat_common_def.mk,
then it can be reused by other platforms.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I37bd65b0f8124f63074fa03339f886c2cdb30bd3

New NXP platform lx2160a-qds:
- Based SoC lx2160a
- Board specific tuning for DDR init.
- Board specific Flash details.
Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I500ddbe9e56c4af5f955da6ecbd4ddc5fbe89a12

New NXP platform lx2160a-rdb(Reference Design Board):
- Based SoC lx2160a
- Board specific tuning for DDR init.
- Board specific Flash details.
Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I9c10dac9d5e67d44a2d94a7a27812220fdcc6ae3

New NXP platform lx2162aqds:
- Based SoC lx2160a
- Board specific tuning for DDR init.
- Board specific Flash details.
Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I53bfff85398313082db77c77625cb2d40cd9b1b1

SoC erratas are handled as part of this commit.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I06f7594d19cc7fc89fe036a8a255300458cb36dd

- NXP SoC lx2160a needs additional ddr_fip.bin.

- There are three types of ddr image that can be created:
  -- ddr_fip.mk for creating fip_ddr.bin image for normal boot.
  -- ddr_fip_sb.mk for creating fip_ddr_sec.bin image for NXP CSF based
     CoT/secure boot.
  -- ddr_fip_tbbr.mk for creating fip_ddr_sec.bin image for MBEDTLS
     CoT/secure boot.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I24bff8d489f72da99f64cb79b2114faa9423ce8c

* NXP SoC is 16 A-72 core SoC.
* SoC specific defines are defined in:
  - soc.def
  - soc.h
* Called for BL2 and BL31 setup, SoC specific setup are implemented in:
  - soc.c
* platform specific helper functions implemented at:
  - aarch64/lx2160a_helpers.S
* platform specific functions used by 'plat/nxp/commpon/psci',
  etc. are implemented at:
  - aarch64/lx2160a.S
* platform specific implementation for handling PSCI_SYSTEM_RESET2:
  - aarch64/lx2160a_warm_rst.S
Signed-off-by: rocket <rod.dorris@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: Ib40086f9d9079ed9b22967baff518c6df9f408b8

- Default header files for:
  -- plat/nxp/soc-lxxxx/include/soc.h uses:
	--- soc_default_base_addr.h
        --- soc_default_base_macros.h

  -- plat/nxp/soc-lxxxx/<$PLAT>/platform_def.h uses:
	--- plat_default_def.h: Every macro define can be overidden.

  -- include/common/tbbr/tbbr_img_def.h uses:
	--- plat_tbbr_img_def.h: platform specific new FIP image macros.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: Ic50003e27e87891be3cd18bdb4e14a1c7272d492

For NXP platforms:
- Setup files for BL2 and BL31
- Other supporting files.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I36a1183a0652701bdede9e02d41eb976accbb017

NXP: Added warm reset handler to handle SMC PSCI_SYSTEM_RESET2
raised from kernel (> 5.4).

As part of first cold boot, DDR training data is stored in NV storage.

As part of this SMC handling, following things are done:
- DDR is put in self-refresh mode to retain the content of DDR.
- Reset cause is saved.
- Reset is triggered.

On next boot to last warm-reset, DDR training is restored from
the NV storage.
Signed-off-by: Ashish Kumar <ashish.kumar@nxp.com>
Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com>
Signed-off-by: Priyanka Singh <priyanka.singh@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I8e4fb0824887af49e959c93825e2ab0ba887fc9d

NV storage API(s) for NXP platforms, supported on:
- flexspi-nor
- SecMon - General Purpose Registers at Low-Power section,
           retains their content if backed by coined battery.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: Id65dee4f28e7d6d2024407030039de33ebe0fa05

NXP SoC supports two TBB mode:
- MBED_TLS based
  -- ROTK key hash is placed as part of the BL2 binary at section:
     --- .rodata.nxp_rotpk_hash
  -- Supporting non-volatile counter via SFP.
     -- platform function used by TFA common authentication code.

- NXP CSF based
  -- ROTK key deployment vary from MBEDTLS
Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: Ib0f0bf024fd93de906c5d4f609383ae9e02b2fbc

All of the NXP SoC, needs fip_fuse image to be
loaded additionally as part of preparation for Trusted board boot
- fip_fuse.bin contains an image for auto fuse provisioning.
- Auto fuse provisioning is based on the input file with values for:
  -- SRK Hash
  -- OTPMK
  -- misc. refer board manual for more details.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I26d4024fefe352d967ca120191f784f1f47aa9d1

Few of the NXP SoC like LX2160A, needs ddr-phy images to be
loaded additionally before DDR initialization
- fip_ddr.bin is created containing upto 6 ddr images.
- With TRUSTED_BOARD_BOOT = 1, fip_ddr.bin is authenticated
  first before loading and starting DDR initialization.
- To successfully compile this image, platform-defined header files
needs to be defined:
  -- include/common/tbbr/tbbr_img_def.h uses:
	--- plat_tbbr_img_def.h: platform specific new FIP image macros.

  -- include/tools/share/firmware_image_package.h uses:
	--- plat_def_fip_uuid.h: platform specific new UUID macros.
	    ---- Added UUID for DDR images to create FIP-DDR.
	    ---- Added UUID for FUSE provisioning images to create FIP-fuse.

  -- include/tools/share/tbbr_oid.h uses:
	--- platform_oid.h: platform specific new OID  macros.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: Icbcf1673a8c398aae98680b5016f4276b4864b91

function load_img(), is dependent on:
- Recursively calling load_image() defined in common/bl_common.c
- for each image in the fip.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I57ca4b666cd1b0b992b7c0fc2a4260b558c0e2a9

SMC call handling at EL3 due SIP and SVC calls.
Signed-off-by: rocket <rod.dorris@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: If86ee43477fc3b6116623928a3299d4e9015df8c

Signed-off-by: rocket <rod.dorris@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I9853263ed38fb2a9f04b9dc7d768942e32074719

Signed-off-by: rocket <rod.dorris@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: Idafd8b0d94edf3515e8317431274d77289b7a1d0

bl31-data file written in assembly helps to manage data at bl31.
Signed-off-by: rocket <rod.dorris@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: Ic3ace03364648cc1174bb05b5b334b9ccdaaa4ed

NXP specifc macro SET_NXP_MAKE_FLAG is added.

NXP has pool of multiple IPs. This macro helps:
- In soc.mk, this macro help the selected IP source files to be included
  for that SoC.
  -- The set of IPs required for one NXP SoC is different to the set of IPs
     required by another NXP SoC.

- For the same SoC,
  -- For one feature, the IP may be required in both BL2 and BL31.
  -- Without the above feature, that IP may be required in one.
     This macro help in selecting the inclusion of source and header files to:
     --- BL2 only
     --- BL31 only
     --- COMM (used by BL2 and BL31)
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I2cdb13b89aa815fc5219cf8bfb9666d0a9f78765