GitLab

Updated cert_tool to add hash information of fw_config image into
the existing "trusted boot fw" certificate.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I720319225925806a2a9f50a1ac9c8a464be975f0

Added support in fiptool to include fw_config image
in FIP.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: Ibbd14723a4141598d9d7f6bfcf88a0ef92cf87bc

with sha 0792dd7d

, support to generate certificate for Secure
Partitions was added for dualroot CoT only, this patch extends
this support for tbbr CoT.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I451c0333536dd1cbe17861d454bdb0dc7a17c63f

Add support to generate certificate "sip-sp-cert" for Secure
Partitions(SP) owned by Silicon provider(SiP).
To avoid deviation from TBBR specification the support is only added for
dualroot CoT and not for TBBR CoT.

A single certificate file is generated containing hash of individual
packages. Maximum 8 secure partitions are supported.

Following new options added to cert_tool:
 --sip-sp-cert --> SiP owned Secure Partition Content Certificate
 --sp-pkg1 --> Secure Partition Package1 file
 --sp-pkg2
 .....
 --sp-pkg8

Trusted world key pair is used for signing.

Going forward, this feature can be extended for Platfrom owned
Partitions, if required.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Ia6dfbc1447cfb41b1fcbd12cf2bf7b88f409bd8d

TBBR spec advocates for optional encryption of firmwares (see optional
requirement: R060_TBBR_FUNCTION). So add an IO abstaction layer to
support firmware decryption that can be stacked above any underlying IO/
packaging layer like FIP etc. It aims to provide a framework to load any
encrypted IO payload.

Also, add plat_get_enc_key_info() to be implemented in a platform
specific manner as handling of encryption key may vary from one platform
to another.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Change-Id: I9892e0ddf00ebecb8981301dbfa41ea23e078b03

This new chain of trust defines 2 independent signing domains:

1) One for the silicon firmware (BL1, BL2, BL31) and optionally the
   Trusted OS. It is rooted in the Silicon ROTPK, just as in the TBBR
   CoT.

2) One for the Normal World Bootloader (BL33). It is rooted in a new key
   called Platform ROTPK, or PROTPK for short.

In terms of certificates chain,

- Signing domain 1) is similar to what TBBR advocates (see page 21 of
  the TBBR specification), except that the Non-Trusted World Public Key
  has been removed from the Trusted Key Certificate.

- Signing domain 2) only contains the Non-Trusted World Content
  certificate, which provides the hash of the Non-Trusted World
  Bootloader. Compared to the TBBR CoT, there's no Non-Trusted World
  Key certificate for simplicity.

Change-Id: I62f1e952522d84470acc360cf5ee63e4c4b0b4d9
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

Currently sptool generates a single blob containing all the Secure
Partitions, with latest SPM implementation, it is desirable to have
individual blobs for each Secure Partition. It allows to leverage
packaging and parsing of SP on existing FIP framework. It also allows
SP packages coming from different sources.

This patch modifies sptool so that it takes number of SP payload pairs
as input and generates number of SP blobs instead of a single blob.

Each SP blob can optionally have its own header containing offsets and
sizes of different payloads along with a SP magic number and version.
It is also associated in FIP with a UUID, provided by SP owner.

Usage example:
sptool -i sp1.bin:sp1.dtb -o sp1.pkg -i sp2.bin:sp2.dtb -o sp2.pkg ...
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Ie2db8e601fa1d4182d0a1d22e78e9533dce231bc

Use the firmware configuration framework to store the io_policies
information inside the configuration device tree instead of the static
structure in the code base.

The io_policies required by BL1 can't be inside the dtb, as this one is
loaded by BL1, and only available at BL2.

This change currently only applies to FVP platform.

Change-Id: Ic9c1ac3931a4a136aa36f7f58f66d3764c1bfca1
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>

Enforce full include path for includes. Deprecate old paths.

The following folders inside include/lib have been left unchanged:

- include/lib/cpus/${ARCH}
- include/lib/el3_runtime/${ARCH}

The reason for this change is that having a global namespace for
includes isn't a good idea. It defeats one of the advantages of having
folders and it introduces problems that are sometimes subtle (because
you may not know the header you are actually including if there are two
of them).

For example, this patch had to be created because two headers were
called the same way: e0ea0928 ("Fix gpio includes of mt8173 platform
to avoid collision."). More recently, this patch has had similar
problems: 46f9b2c3 ("drivers: add tzc380 support").

This problem was introduced in commit 4ecca339

 ("Move include and
source files to logical locations"). At that time, there weren't too
many headers so it wasn't a real issue. However, time has shown that
this creates problems.

Platforms that want to preserve the way they include headers may add the
removed paths to PLAT_INCLUDES, but this is discouraged.

Change-Id: I39dc53ed98f9e297a5966e723d1936d6ccf2fc8f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

This tool packages Secure Partitions and Resource Descriptor blobs into
a simple file that can be loaded by SPM.

Change-Id: If3800064f30bdc3d7fc6a15ffbb3007ef632bcaa
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

All identifiers, regardless of use, that start with two underscores are
reserved. This means they can't be used in header guards.

The style that this project is now to use the full name of the file in
capital letters followed by 'H'. For example, for a file called
"uart_example.h", the header guard is UART_EXAMPLE_H.

The exceptions are files that are imported from other projects:

- CryptoCell driver
- dt-bindings folders
- zlib headers

Change-Id: I50561bf6c88b491ec440d0c8385c74650f3c106e
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

RFC4122 defines that fields are stored in network order (big endian),
but TF-A stores them in machine order (little endian by default in TF-A).
We cannot change the future UUIDs that are already generated, but we can store
all the bytes using arrays and modify fiptool to generate the UUIDs with
the correct byte order.

Change-Id: I97be2d3168d91f4dee7ccfafc533ea55ff33e46f
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>

This patch implements support for adding dynamic configurations for
BL31 (soc_fw_config), BL32 (tos_fw_config) and BL33 (nt_fw_config). The
necessary cert tool support and changes to default chain of trust are made
for these configs.

Change-Id: I25f266277b5b5501a196d2f2f79639d838794518
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

This patch updates the `fiptool` and `cert_create` for the
`hw_config` and `tb_fw_config` dynamic configuration files.
The necessary UUIDs and OIDs are assigned to these files and
the `cert_create` is updated to generate appropriate hashes
and include them in the "Trusted Boot FW Certificate". The
`fiptool` is updated to allow the configs to be specified
via cmdline and included in the generated FIP.

Change-Id: I940e751a49621ae681d14e162aa1f5697eb0cb15
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

Since Trusted OS firmware may have extra images, need to
assign new uuid and image id for them.
The TBBR chain of trust has been extended to add support
for the new images within the existing Trusted OS firmware
content certificate.

Change-Id: I678dac7ba1137e85c5779b05e0c4331134c10e06
Signed-off-by: Summer Qin <summer.qin@arm.com>

Platforms aligned with TBBR are supposed to use their own OIDs, but
defining the same macros with different OIDs does not provide any
value (at least technically).

For easier use of TBBR, this commit allows platforms to reuse the OIDs
obtained by ARM Ltd.  This will be useful for non-ARM vendors that
do not need their own extension fields in their certificate files.

The OIDs of ARM Ltd. have been moved to include/tools_share/tbbr_oid.h

Platforms can include <tbbr_oid.h> instead of <platform_oid.h> by
defining USE_TBBR_DEFS as 1.  USE_TBBR_DEFS is 0 by default to keep the
backward compatibility.

For clarification, I inserted a blank line between headers from the
include/ directory (#include <...>) and ones from a local directory
(#include "..." ).
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Some header files need to be shared between TF and host programs.
For fiptool, two headers are copied to the tools/fiptool directory,
but it looks clumsy.

This commit introduces a new directory, include/tools_share, which
collects headers that should be shared between TF and host programs.

This will clarify the interface exposed to host tools.  We should
add new headers to this directory only when we really need to do so.

For clarification, I inserted a blank line between headers from the
include/ directory (#include <...>) and ones from a local directory
(#include "..." ).
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>