Skip to content

GitLab

Switch branch/tag
  1. 21 Nov, 2017 1 commit
  3. 13 Nov, 2017 2 commits
    • Jeenu Viswambharan's avatar
      BL31: Program Priority Mask for SMC handling · 3d732e23
      Jeenu Viswambharan authored 
      

On GICv3 systems, as a side effect of adding provision to handle EL3
interrupts (unconditionally routing FIQs to EL3), pending Non-secure
interrupts (signalled as FIQs) may preempt execution in lower Secure ELs
[1]. This will inadvertently disrupt the semantics of Fast SMC
(previously called Atomic SMC) calls.

To retain semantics of Fast SMCs, the GIC PMR must be programmed to
prevent Non-secure interrupts from preempting Secure execution. To that
effect, two new functions in the Exception Handling Framework subscribe
to events introduced in an earlier commit:

  - Upon 'cm_exited_normal_world', the Non-secure PMR is stashed, and
    the PMR is programmed to the highest Non-secure interrupt priority.

  - Upon 'cm_entering_normal_world', the previously stashed Non-secure
    PMR is restored.

The above sequence however prevents Yielding SMCs from being preempted
by Non-secure interrupts as intended. To facilitate this, the public API
exc_allow_ns_preemption() is introduced that programs the PMR to the
original Non-secure PMR value. Another API
exc_is_ns_preemption_allowed() is also introduced to check if
exc_allow_ns_preemption() had been called previously.

API documentation to follow.

[1] On GICv2 systems, this isn't a problem as, unlike GICv3, pending NS
    IRQs during Secure execution are signalled as IRQs, which aren't
    routed to EL3.

Change-Id: Ief96b162b0067179b1012332cd991ee1b3051dd0
Signed-off-by: default avatarJeenu Viswambharan <jeenu.viswambharan@arm.com>
      3d732e23
    • Jeenu Viswambharan's avatar
      GIC: Introduce API to get interrupt ID · 4ee8d0be
      Jeenu Viswambharan authored 
      

Acknowledging interrupt shall return a raw value from the interrupt
controller in which the actual interrupt ID may be encoded. Add a
platform API to extract the actual interrupt ID from the raw value
obtained from interrupt controller.

Document the new function. Also clarify the semantics of interrupt
acknowledge.

Change-Id: I818dad7be47661658b16f9807877d259eb127405
Signed-off-by: default avatarJeenu Viswambharan <jeenu.viswambharan@arm.com>
      4ee8d0be
  5. 25 Oct, 2017 1 commit
  7. 16 Oct, 2017 14 commits
  9. 05 Oct, 2017 2 commits
    • Soby Mathew's avatar
      GICv3: ITS architectural save and restore helpers · b258278e
      Soby Mathew authored 
      

This patch adds functions to save and restore GICv3 ITS registers during
system suspend. Please note that the power management of GIC ITS is
implementation defined. These functions only implements the
architectural part of the ITS power management and they do not restore
memory structures or register content required to support ITS. Even if
the ITS implementation stores structures in memory, an implementation
defined power down sequence is likely to be required to flush some
internal ITS caches to memory. If such implementation defined sequence
is not followed, the platform must ensure that the ITS is not power
gated during system suspend.

Change-Id: I5f31e5541975aa7dcaab69b0b7f67583c0e27678
Signed-off-by: default avatarSoby Mathew <soby.mathew@arm.com>
Signed-off-by: default avatarDouglas Raillard <douglas.raillard@arm.com>
      b258278e
    • Soby Mathew's avatar
      GICv3: add functions for save and restore · ebf1ca10
      Soby Mathew authored 
      

During system suspend, the GICv3 Distributor and Redistributor context
can be lost due to power gating of the system power domain. This means
that the GICv3 context needs to be saved prior to system suspend and
restored on wakeup. Currently the consensus is that the Firmware should
be in charge of this. See tf-issues#464 for more details.

This patch introduces helper APIs in the GICv3 driver to save and
restore the Distributor and Redistributor contexts. The GICv3 ITS
context is not considered in this patch because the specification says
that the details of ITS power management is implementation-defined.
These APIs are expected to be appropriately invoked by the platform
layer during system suspend.

Fixes ARM-software/tf-issues#464

Change-Id: Iebb9c6770ab8c4d522546f161fa402d2fe02ec00
Signed-off-by: default avatarSoby Mathew <soby.mathew@arm.com>
Signed-off-by: default avatarDouglas Raillard <douglas.raillard@arm.com>
      ebf1ca10
  11. 22 Sep, 2017 2 commits
  13. 21 Sep, 2017 1 commit
    • Antonio Nino Diaz's avatar
      Fix type of `unsigned long` constants · e47ac1fd
      Antonio Nino Diaz authored 
      

The type `unsigned long` is 32 bit wide in AArch32, but 64 bit wide in
AArch64. This is inconsistent and that's why we avoid using it as per
the Coding Guidelines. This patch changes all `UL` occurrences to `U`
or `ULL` depending on the context so that the size of the constant is
clear.

This problem affected the macro `BIT(nr)`. As long as this macro is used
to fill fields of registers, that's not a problem, since all registers
are 32 bit wide in AArch32 and 64 bit wide in AArch64. However, if the
macro is used to fill the fields of a 64-bit integer, it won't be able
to set the upper 32 bits in AArch32.

By changing the type of this macro to `unsigned long long` the behaviour
is always the same regardless of the architecture, as this type is
64-bit wide in both cases.

Some Tegra platform files have been modified by this patch.

Change-Id: I918264c03e7d691a931f0d1018df25a2796cc221
Signed-off-by: default avatarAntonio Nino Diaz <antonio.ninodiaz@arm.com>
      e47ac1fd
  15. 01 Aug, 2017 2 commits
    • Jeenu Viswambharan's avatar
      Add SMMUv3 driver · 1154586b
      Jeenu Viswambharan authored 
      

The driver has only one API: to initialize an SMMUv3 device. This
operates on a device that implements secure state, by invalidating
secure caches and TLBs.

Change-Id: Ief32800419ddf0f1fe38c8f0da8f5ba75c72c826
Signed-off-by: default avatarJeenu Viswambharan <jeenu.viswambharan@arm.com>
      1154586b
    • Jeenu Viswambharan's avatar
      CCI: Adapt for specific product at run time · e33fd445
      Jeenu Viswambharan authored 
      

The current build system and driver requires the CCI product to be
specified at build time. The device constraints can be determined at run
time from its ID registers, obviating the need for specifying them
ahead.

This patch adds changes to identify and validate CCI at run time. Some
global variables are renamed to be in line with the rest of the code
base.

The build option ARM_CCI_PRODUCT_ID is now removed, and user guide is
updated.

Change-Id: Ibb765e349d3bc95ff3eb9a64bde1207ab710a93d
Signed-off-by: default avatarJeenu Viswambharan <jeenu.viswambharan@arm.com>
      e33fd445
  17. 12 Jul, 2017 1 commit
    • Isla Mitchell's avatar
      Fix order of #includes · 2a4b4b71
      Isla Mitchell authored 
      

This fix modifies the order of system includes to meet the ARM TF coding
standard. There are some exceptions in order to retain header groupings,
minimise changes to imported headers, and where there are headers within
the #if and #ifndef statements.

Change-Id: I65085a142ba6a83792b26efb47df1329153f1624
Signed-off-by: default avatarIsla Mitchell <isla.mitchell@arm.com>
      2a4b4b71
  19. 28 Jun, 2017 1 commit
    • Soby Mathew's avatar
      Add headers to enable CryptoCell integration · bdd1cbf5
      Soby Mathew authored 
      

This patch adds header files with required declarations and
macro definitions to enable integration with CryptoCell SBROM
version `CC712 – Release 1.0.0.1061`. These headers enable ARM
Trusted Firmware to build and link with CryptoCell SBROM
library.

Change-Id: I501eda7fe1429acb61db8e1cab78cc9aee9c1871
Signed-off-by: default avatarSoby Mathew <soby.mathew@arm.com>
      bdd1cbf5
  21. 15 Jun, 2017 1 commit
  23. 05 Jun, 2017 1 commit
  25. 31 May, 2017 2 commits
  27. 24 May, 2017 1 commit
    • Antonio Nino Diaz's avatar
      mbedtls: Use `tf_snprintf` instead of `snprintf` · ab1794f5
      Antonio Nino Diaz authored 
      

The Trusted Firmware uses a subset of the APIs provided by mbed TLS.
This subset internally uses `snprintf`, but the only format specifier
used is '%d', which is supported by `tf_snprintf`.

This patch makes mbed TLS use `tf_snprintf` instead of `snprintf`,
saving 3 KB in both debug and release builds when TBBR is enabled.

Change-Id: I7f992a21015930d7c0f4660e7a28ceefd60b9597
Signed-off-by: default avatarAntonio Nino Diaz <antonio.ninodiaz@arm.com>
      ab1794f5
  29. 12 May, 2017 1 commit
    • David Cunado's avatar
      mbedtls: Namespace for TF specific macros · b1883510
      David Cunado authored 
      

An earlier patch (arm-trusted-firmware#874) migrated MBEDTLS_ suffixed
macros to have a TBBR_ suffix to avoid any potential clash with future
mbedtls macros.

But on reflection the TBBR_ suffix could be confusing as the macros
are used to drive TF-specific configuration of mbedtls. As such
this patch migrates these macros from TBBR_suffix to TF_MBEDTLS_
suffix which more accurately conveys their use.

Change-Id: Ic87642b653ceeaa03d62f724976abd5e12e867d4
Signed-off-by: default avatarDavid Cunado <david.cunado@arm.com>
      b1883510
  31. 03 May, 2017 1 commit
  33. 31 Mar, 2017 1 commit
  35. 22 Mar, 2017 1 commit
    • dp-arm's avatar
      mbedtls: Namespace TF specific macros · 66b4c166
      dp-arm authored 
      

These macros are not part of mbed TLS so they should not be prefixed
with `MBEDTLS_` to avoid potential collision in the future. Use the
`TBBR_` suffix to highlight that they only used in TF.

`MBEDTLS_KEY_ALG` was not modified because that is documented and used
by platforms to select the key algorithm.

Change-Id: Ief224681715c481691c80810501830ce16e210b0
Signed-off-by: default avatardp-arm <dimitris.papastamos@arm.com>
      66b4c166
  37. 23 Jan, 2017 1 commit
  39. 10 Jan, 2017 1 commit
  41. 15 Dec, 2016 1 commit
  43. 14 Dec, 2016 1 commit