GitLab

At the moment, the memory translation library allows to create memory
mappings of 2 types:

 - Device nGnRE memory (named MT_DEVICE in the library);

 - Normal, Inner Write-back non-transient, Outer Write-back
   non-transient memory (named MT_MEMORY in the library).

As a consequence, the library code treats the memory type field as a
boolean: everything that is not device memory is normal memory and
vice-versa.

In reality, the ARMv8 architecture allows up to 8 types of memory to
be used at a single time for a given exception level. This patch
reworks the memory attributes such that the memory type is now defined
as an integer ranging from 0 to 7 instead of a boolean. This makes it
possible to extend the list of memory types supported by the memory
translation library.

The priority system dictating memory attributes for overlapping
memory regions has been extended to cope with these changes but the
algorithm at its core has been preserved. When a memory region is
re-mapped with different memory attributes, the memory translation
library examines the former attributes and updates them only if
the new attributes create a more restrictive mapping. This behaviour
is unchanged, only the manipulation of the value has been modified
to cope with the new format.

This patch also introduces a new type of memory mapping in the memory
translation library: MT_NON_CACHEABLE, meaning Normal, Inner
Non-cacheable, Outer Non-cacheable memory. This can be useful to map
a non-cacheable memory region, such as a DMA buffer for example.

The rules around the Execute-Never (XN) bit in a translation table
for an MT_NON_CACHEABLE memory mapping have been aligned on the rules
used for MT_MEMORY mappings:
 - If the memory is read-only then it is also executable (XN = 0);
 - If the memory is read-write then it is not executable (XN = 1).

The shareability field for MT_NON_CACHEABLE mappings is always set as
'Outer-Shareable'. Note that this is not strictly needed since
shareability is only relevant if the memory is a Normal Cacheable
memory type, but this is to align with the existing device memory
mappings setup. All Device and Normal Non-cacheable memory regions
are always treated as Outer Shareable, regardless of the translation
table shareability attributes.

This patch also removes the 'ATTR_SO' and 'ATTR_SO_INDEX' #defines.
They were introduced to map memory as Device nGnRnE (formerly called
"Strongly-Ordered" memory in the ARMv7 architecture) but were not
used anywhere in the code base. Removing them avoids any confusion
about the memory types supported by the library.

Upstream platforms do not currently use the MT_NON_CACHEABLE memory
type.

NOTE: THIS CHANGE IS SOURCE COMPATIBLE BUT PLATFORMS THAT RELY ON THE
BINARY VALUES OF `mmap_attr_t` or the `attr` argument of
`mmap_add_region()` MAY BE BROKEN.

Change-Id: I717d6ed79b4c845a04e34132432f98b93d661d79

The debug prints used to debug translation table setup in xlat_tables.c
used the `printf()` standard library function instead of the stack
optimized `tf_printf()` API. DEBUG_XLAT_TABLE option was used to enable
debug logs within xlat_tables.c and it configured a much larger stack
size for the platform in case it was enabled. This patch modifies these
debug prints within xlat_tables.c to use tf_printf() and modifies the format
specifiers to be compatible with tf_printf(). The debug prints are now enabled
if the VERBOSE prints are enabled in Trusted Firmware via LOG_LEVEL build
option.

The much larger stack size definition when DEBUG_XLAT_TABLE is defined
is no longer required and the platform ports are modified to remove this
stack size definition.

Change-Id: I2f7d77ea12a04b827fa15e2adc3125b1175e4c23

Migrate all direct usage of __attribute__ to usage of their
corresponding macros from cdefs.h.
e.g.:
 - __attribute__((unused)) -> __unused
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>

This patch defines the ARRAY_SIZE macro for calculating number of elements
in an array and uses it where appropriate.

Change-Id: I72746a9229f0b259323972b498b9a3999731bc9b

This patch reworks the manner in which the M,A, C, SA, I, WXN & EE bits of
SCTLR_EL3 & SCTLR_EL1 are managed. The EE bit is cleared immediately after reset
in EL3. The I, A and SA bits are set next in EL3 and immediately upon entry in
S-EL1. These bits are no longer managed in the blX_arch_setup() functions. They
do not have to be saved and restored either. The M, WXN and optionally the C
bit are set in the enable_mmu_elX() function. This is done during both the warm
and cold boot paths.

Fixes ARM-software/tf-issues#226

Change-Id: Ie894d1a07b8697c116960d858cd138c50bc7a069

This patch adds a 'flags' parameter to each exception level specific function
responsible for enabling the MMU. At present only a single flag which indicates
whether the data cache should also be enabled is implemented. Subsequent patches
will use this flag when enabling the MMU in the warm boot paths.

Change-Id: I0eafae1e678c9ecc604e680851093f1680e9cefa

Currently the TCR bits are hardcoded in xlat_tables.c. In order to
map higher physical address into low virtual address, the TCR bits
need to be configured accordingly.

This patch is to save the max VA and PA and calculate the TCR.PS/IPS
and t0sz bits in init_xlat_tables function.

Change-Id: Ia7a58e5372b20200153057d457f4be5ddbb7dae4

Current ATF uses a direct physical-to-virtual mapping, that is, a physical
address is mapped to the same address in the virtual space. For example,
physical address 0x8000_0000 is mapped to 0x8000_0000 virtual. This
approach works fine for FVP as all its physical addresses fall into 0 to
4GB range. But for other platform where all I/O addresses are 48-bit long,
If we follow the same direct mapping, we would need virtual address range
from 0 to 0x8fff_ffff_ffff, which is about 144TB. This requires a
significant amount of memory for MMU tables and it is not necessary to use
that much virtual space in ATF.

The patch is to enable mapping a physical address range to an arbitrary
virtual address range (instead of flat mapping)
Changed "base" to "base_va" and added "base_pa" in mmap_region_t and
modified functions such as mmap_add_region and init_xlation_table etc.
Fixes ARM-software/tf-issues#158

Previously, the enable_mmu_elX() functions were implicitly part of
the platform porting layer since they were included by generic
code. These functions have been placed behind 2 new platform
functions, bl31_plat_enable_mmu() and bl32_plat_enable_mmu().
These are weakly defined so that they can be optionally overridden
by platform ports.

Also, the enable_mmu_elX() functions have been moved to
lib/aarch64/xlat_tables.c for optional re-use by platform ports.
These functions are tightly coupled with the translation table
initialization code.

Fixes ARM-software/tf-issues#152

Change-Id: I0a2251ce76acfa3c27541f832a9efaa49135cc1c

Previously, platform.h contained many declarations and definitions
used for different purposes. This file has been split so that:

* Platform definitions used by common code that must be defined
  by the platform are now in platform_def.h. The exact include
  path is exported through $PLAT_INCLUDES in the platform makefile.

* Platform definitions specific to the FVP platform are now in
  /plat/fvp/fvp_def.h.

* Platform API declarations specific to the FVP platform are now
  in /plat/fvp/fvp_private.h.

* The remaining platform API declarations that must be ported by
  each platform are still in platform.h but this file has been
  moved to /include/plat/common since this can be shared by all
  platforms.

Change-Id: Ieb3bb22fbab3ee8027413c6b39a783534aee474a

Addresses were declared as "unsigned int" in drivers/arm/peripherals/pl011/pl011.h and in function init_xlation_table. Changed to use "unsigned long" instead
Fixes ARM-software/tf-issues#156

Add tag names to all unnamed structs in header files. This
allows forward declaration of structs, which is necessary to
reduce header file nesting (to be implemented in a subsequent
commit).

Also change the typedef names across the codebase to use the _t
suffix to be more conformant with the Linux coding style. The
coding style actually prefers us not to use typedefs at all but
this is considered a step too far for Trusted Firmware.

Also change the IO framework structs defintions to use typedef'd
structs to be consistent with the rest of the codebase.

Change-Id: I722b2c86fc0d92e4da3b15e5cab20373dd26786f

Move almost all system include files to a logical sub-directory
under ./include. The only remaining system include directories
not under ./include are specific to the platform. Move the
corresponding source files to match the include directory
structure.

Also remove pm.h as it is no longer used.

Change-Id: Ie5ea6368ec5fad459f3e8a802ad129135527f0b3

Change-Id: I5b8d040ebc6672e40e4f13925e2fd5bc124103f4
Signed-off-by: Jon Medhurst <tixy@linaro.org>