GitLab

GICR_WAKER.ProcessorSleep can only be set to zero when:
— GICR_WAKER.Sleep bit[0] == 0.
— GICR_WAKER.Quiescent bit[31] == 0.

On some platforms, when system reboot with GIC in sleep
mode but with power ON, such as on NXP's i.MX8QM, Linux
kernel enters suspend but could be requested to reboot,
and GIC is in sleep mode and it is inside a power domain
which is ON in this scenario, when CPU reset, the GIC
driver trys to set CORE's redistributor interface to awake,
with GICR_WAKER.Sleep bit[0] and GICR_WAKER.Quiescent bit[31]
both set, the ProcessorSleep bit[1] will never be clear
and cause system hang.

This patch makes sure GICR_WAKER.Sleep bit[0] and
GICR_WAKER.Quiescent bit[31] are both zeor before clearing
ProcessorSleep bit[1].
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

Current implementation of i.MX8QM power management related
features does NOT optimize power number, all system resources
like CCI, DDR, and A cluster etc. are kept in STBY mode (powered
ON) when system suspend or CPU hotplug.

To lower the power number, OFF mode should be adopted for those
system resources whenever they can be OFF, A cluster will be OFF
if the CPUs in the cluster are all off line, DDR/MU/DB can be OFF
if system suspend, IRQ steer can be OFF if the wakeup source is
belonged to system controller partition, so wakeup source runtime
check is used to determine if IRQ steer can be OFF before system
suspend.

If resources are powered off for suspend, they should be restored
properly after system resume.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

Enforce full include path for includes. Deprecate old paths.

The following folders inside include/lib have been left unchanged:

- include/lib/cpus/${ARCH}
- include/lib/el3_runtime/${ARCH}

The reason for this change is that having a global namespace for
includes isn't a good idea. It defeats one of the advantages of having
folders and it introduces problems that are sometimes subtle (because
you may not know the header you are actually including if there are two
of them).

For example, this patch had to be created because two headers were
called the same way: e0ea0928 ("Fix gpio includes of mt8173 platform
to avoid collision."). More recently, this patch has had similar
problems: 46f9b2c3 ("drivers: add tzc380 support").

This problem was introduced in commit 4ecca339

 ("Move include and
source files to logical locations"). At that time, there weren't too
many headers so it wasn't a real issue. However, time has shown that
this creates problems.

Platforms that want to preserve the way they include headers may add the
removed paths to PLAT_INCLUDES, but this is discouraged.

Change-Id: I39dc53ed98f9e297a5966e723d1936d6ccf2fc8f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

- Migrate to new GIC interfaces.
- Migrate to bl31_early_platform_setup2().
- Remove references to removed build options.

Change-Id: Ia7c63f75325ea4b41e32a9de3f01b0007d0ae210
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

This patch adds support for NXP's imx SoC common
function support like topology, gic implementation.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>