GitLab

Adds bl2 with FIP to the build required for mbed Linux booting where
we do:

BootROM -> SPL -> BL2 -> OPTEE -> u-boot

If NEED_BL2 is specified then BL2 will be built and BL31 will have
its address range modified upwards to accommodate. BL31 must be
loaded from a FIP in this case.

If NEED_BL2 is not specified then the current BL31 boot flow is
unaffected and u-boot SPL will load and execute BL31 directly.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Change-Id: I655343b3b689b1fc57cfbedda4d3dc2fbd549a96

This patch enables Trusted Boot on the i.MX8MM with BL2 doing image
verification from a FIP prior to hand-over to BL31.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Change-Id: I3c22783a5c49544d0bace8ef3724784b9b7cc64a

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Change-Id: I0557ce6d0aa5ab321cac1ee25280b96762024396

Adds a number of definitions consistent with the established WaRP7
equivalents specifying number of io_handles and block devices.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Change-Id: If1d7ef1ad3ac3dfc860f949392c7534ce8d206e3

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Change-Id: I9833a54d0938d70886ac88b1922b17edf1dee8e0

Allows for exporting of FIP related methods cleanly in a private header.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Change-Id: I8523f1370312ed22ff7ca710cd916be52f725e3c

The number of gpc imr mask reg & the offset is different
on some SOC, so correct it & replace the magic number with
macro define.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: Ic701675cdd92e043dcd7f06722f2e871068aec74

Add sdei support for i.MX8MM, this is to let jailhouse Hypervisor
could use SDEI to do hypervisor management, after physical IRQ
has been disabled routing.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Change-Id: I5fd697fee22df151e13d0f1335e8ac8a7bae6189

Although the GPC provides the similar functions for all the
i.MX8M SoC family, the HW register offset and bit defines
still have some slight difference, so move the hw reg
offset & most of the bitfield defines in 'gpc_reg.h' that
is specific to each SoC.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I291c435fe98c2f6e6ff8fe0c715ff3a83daa6a0f

This patch moves all GICv3 driver files into new added
'gicv3.mk' makefile for the benefit of the generic driver
which can evolve in the future without affecting platforms.
The patch adds GICv3 driver configuration flags
'GICV3_IMPL', 'GICV3_IMPL_GIC600_MULTICHIP' and
'GICV3_OVERRIDE_DISTIF_PWR_OPS' described in
'GICv3 driver options' section of 'build-option.rst'
document.

NOTE: Platforms with GICv3 driver need to be modified to
include 'drivers/arm/gic/v3/gicv3.mk' in their makefiles.

Change-Id: If055f6770ff20f5dee5a3c99ae7ced7cdcac5c44
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

This patch provides separation of GICD, GICR accessor
functions and adds new macros for GICv3 registers access
as a preparation for GICv3.1 and GICv4 support.
NOTE: Platforms need to modify to include both
'gicdv3_helpers.c' and 'gicrv3_helpers.c' instead of the
single helper file previously.

Change-Id: I1641bd6d217d6eb7d1228be3c4177b2d556da60a
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

Some boards (f.e. Verdin i.MX8M Mini) use different UART base address
for serial debug output, so make this value configurable (as a
build option).
Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com>
Change-Id: I988492ccecbc3f64a5153b381c4a97b8a0181f52

Since now the generic console_t structure holds the UART base address as
well, let's use that generic location and drop the UART driver specific
data structure at all.

Change-Id: I058f793e4024fa7291e432f5be374a77faf16f36
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

PLATFORM_CORE_COUNT - Unsigned int
PLATFORM_CLUSTER_COUNT - Unsigned int
PLATFORM_MAX_CPUS_PER_CLUSTER - Unsigned int
PLATFORM_CORE_COUNT_PER_CLUSTER - Unsigned int
Signed-off-by: Deepika Bhavnani <deepika.bhavnani@arm.com>
Change-Id: I8b19e833a4e1067e1cfcc9bfaede7854e0e63004

Add the basic support for opteed SPD on imx8mq & imx8mm.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I6c4855c89dea78d13d172c3d86cf047f829e51ce

Add the basic support for RDC init/config driver,
this module driver can be enhanced more if necessary.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I290dc378d0d85671435f9de46d5aa790b4e006c8

CAAM module must be initialized in secure world
before it can be used in non-secure world.

Change-Id: I042893667ddef99d8b6fc3902847d516d8591996
Signed-off-by: Jacky Bai <ping.bai@nxp.com>

The new API becomes the default one.

Change-Id: Ic1d602da3dff4f4ebbcc158b885295c902a24fec
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>

AIPSTZ provide access control for all the peripherals connected
to it. In this patch all the perperals are configured accessible
to all the master. it can be customized based the actual use
case.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I5ef5baa1da6906f13a60923d27ede336c61e319a

The IMX_SIP_BUILDINFO call was implemented for imx8qm and imx8qx but
it's also applicable to imx8m.

This fixes U-Boot not printing commit hash on 8m with upstream TF-A.

Change-Id: Idcfd9729eaaccf329c24e241da325f1f6cd3c880
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>

The 'drivers/console/aarch64/console.S' is not needed,
so remove it from build to fix the build error when
'ERROR_DEPRECATED'set.

Change-Id: Id047a355f82fd33298b7e2b49eff289d28eb5b56
Signed-off-by: Jacky Bai <ping.bai@nxp.com>

The i.MX8M Mini is new SOC of the i.MX8M family. it is
focused on delivering the latest and greatest video and
audio experience combining state-of-the-art media-specific
features with high-performance processing while optimized
for lowest power consumption. The i.MX 8M Mini Media Applications
Processor is  14nm FinFET product of the growing i.MX8M family
targeting the consumer & industrial market. It is built in 14LPP
to achieve both high performance and low power consumption
and relies on a powerful fully coherent core complex based on
a quad Cortex-A53 cluster with video and graphics accelerators

this patch add the basic support for i.MX8MM.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>