GitLab

These two targets are build by make subprocesses and are independent.
So splitting them into own targets allow make to build them in parallel.
$(TIMBUILD) script depends on $(TIMDDRTOOL) so specify it in Makefile.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I139fc7fe64d8de275b01a853e15bfb88c4ff840d

Add check when building mrvl_bootimage that size of bl1 image is not bigger
than maximal size.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Ib873debd3cfdba9acd4c168ee37edab3032e9f25

FORCE target is used as a dependency for other file targets which needs to
be always rebuilt. .PHONY target is standard Makefile target which specify
non-file targets and therefore needs to be always rebuilt.

Targets clean, realclean and distclean are .PHONY targets used to remove
built files. Correctly set that mrvl_clean target is prerequisite for these
clean targets to ensure that built files are removed.

Finally this change with usage of FORCE target allows to remove mrvl_clean
hack from the prerequisites of a8k ${DOIMAGETOOL} target which was used
just to ensure that ${DOIMAGETOOL} is always rebuilt via make subprocess.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I2fa8971244b43f101d846fc433ef7b0b6f139c92

Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Id766db4a900a56c795fe5ffdd8a2b80b1aaa2132

Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Iaecd6c24bf334a959ac2bf395c3ee49c810b01a7

Create copy of WTMI images instead of moving them into TF-A build directory.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I2dc24c33b9ce540e4acde51fc1a5c946ae66a5d7

Rather create a temporary copy in $(BUILD_PLAT) and modify only copy.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I256c029106ea6f69faa086fc4e5bee9f68cd257f

$(WTMI_IMG) is used only by $(MAKE) subprocess in $(DOIMAGEPATH) directory.
So calling truncate on $(WTMI_IMG) after $(MAKE) in $(DOIMAGEPATH) has no
effect and can just damage input file for future usage. Therefore remove
this truncate call.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I9925c54c5d3d10eadc19825c5565ad4598a739a7

Marvell's TF-A fork has SUBVERSION set to devel-18.12.2.

The only differences between Marvell's devel-18.12.0 and devel-18.12.2
versions are documentation updates and cherry-picked patches from TF-A
upstream repository.

So upstream TF-A has already all changes from Marvell's TF-A devel-18.12.2
fork and therefore update SUBVERSION to reflect this state.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I5ce946a5176a5cbf124acd8037392463d586b072

This new target builds boot-image.bin binary as described in documentation.
This image does not contain WTMI image and therefore WTP repository is not
required for building.

Having ability to build just this boot-image.bin binary without full
flash-image.bin is useful for A3720 Turris MOX board which does not use
Marvell's WTP and a3700_utils.

To reduce duplicity between a8k and a3k code, define this new target and
also definitions for $(BUILD_PLAT)/$(BOOT_IMAGE) in common include file
marvell_common.mk.

For this purpose it is needed to include plat/marvell/marvell.mk file from
a3700_common.mk unconditionally (and not only when WTP is defined). Now
when common file plat/marvell/marvell.mk does not contain definition for
building $(DOIMAGETOOL), it is possible to move its inclusion at the top of
the a3700_common.mk file.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Ic58303b37a1601be9a06ff83b7a279cb7cfc8280

Current binary wtptp/linux/tbb_linux which is specified in $(DOIMAGETOOL)
variable points to external pre-compiled Marvell x86_64 ELF linux binary
from A3700-utils-marvell WTP repository.

It means that currently it is not possible to compile TF-A for A3720 on
other host platform then linux x86_64.

Part of the A3700-utils-marvell WTP repository is also source code of
$(DOIMAGETOOL) TBB_Linux tool.

This change adds support for building $(DOIMAGETOOL) also for a3k platform.

After running $(MAKE) at appropriate subdirectory of A3700-utils-marvell
WTP repository, compiled TBB_linux tool will appear in WTP subdirectory
wtptp/src/TBB_Linux/release/. So update also $(DOIMAGETOOL) variable to
point to the correct location where TBB_linux was built.

To build TBB_linux it is required to compile external Crypto++ library
which is available at: https://github.com/weidai11/cryptopp.git



User needs to set CRYPTOPP_PATH option to specify path to that library.

After this change it is now possible to build whole firmware for A3720
platform without requirement to use pre-compiled/proprietary x86_64
executable binaries from Marvell.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I6f26bd4356778a2f8f730a223067a2e550e6c8e0

Currently a3k target is misusing ${DOIMAGETOOL} target for building flash
and UART images. It is not used for building image tool.

So move ${DOIMAGETOOL} target from common marvell include file into a8k
include file and add correct invocation of ${MAKE} into a3k for building
flash and UART images.

Part of this change is also checks that MV_DDR_PATH for a3k was specified
by user as this option is required for building a3k flash and UART images.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I5ae9d08b8505460933f17836c9b6435fd6e51bb6

Include file plat/marvell/marvell.mk for platform A3700 was included two
times. Once from file plat/marvell/armada/a3k/common/a3700_common.mk and
second time from common file plat/marvell/armada/common/marvell_common.mk.

It caused following warning every time was make called:

    plat/marvell/marvell.mk:51: warning: overriding recipe for target 'mrvl_clean'
    plat/marvell/marvell.mk:51: warning: ignoring old recipe for target 'mrvl_clean'

Change in this commit removes inclusion of plat/marvell/marvell.mk file in
common file plat/marvell/armada/common/marvell_common.mk. As a80x0 platform
needs this include file, add it also into a80x0 platform specific include
file lat/marvell/armada/a8k/common/a8k_common.mk.

Also moves inclusion of plat/marvell/marvell.mk file in a3700 platform file
plat/marvell/armada/a3k/common/a3700_common.mk at correct place. Global
plat/marvell/marvell.mk expects that variables DOIMAGEPATH and DOIMAGETOOL
are already defined, but it defines MARVELL_SECURE_BOOT variable which is
needed by plat/marvell/armada/a3k/common/a3700_common.mk.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I5cbbd7eb8a3376924419f9850516b2a4924be5aa

For building fip image it is not needed to build target mrvl_flash. This
fip image contains only bl2, bl31 and bl33 (u-boot.bin) images and
therefore it does not depend on Marvell wtmi and wtp A3700-utils.

So remove mrvl_flash dependency for fip target to allow building fip image
without need to build mrvl_flash and therefore specify and provide Marvell
wmi and wtp A3700-utils.

This changes fixes compilation of fip image for A3700 platform by command:

    make CROSS_COMPILE=aarch64-linux-gnu- BL33=/path/u-boot/u-boot.bin \
         DEBUG=0 LOG_LEVEL=0 USE_COHERENT_MEM=0 PLAT=a3700 fip

Marvell boot image can be still build by 'mrvl_flash' target.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Iba9a9da5be6fd1da23407fc2d490aedcb1a292c9

plat: marvell: armada: a3k: When WTP is empty do not define variables and targets which depends on it

Some of targets (e.g. mrvl_flash) depends on WTP build option. Other
targets (e.g. fip) can be build also without WTP build option as they do
not depend on it.

This change put all A3720 variables and targets which depends on WTP into
conditional if-endif section, so they are not defined when user has not
supplied WTP build option.

Target mrvl_flash is defined also when WTP was not specified and in this
case it just print error message to help user.

Variables which do not depend on WTP are moved to the top of
a3700_common.mk file.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Idb3892233586a0afca3e0e6564279641d2e4b960

And from crash_console_flush.

We ignore the error information return by console_flush in _every_
place where we call it, and casting the return type to void does not
work around the MISRA violation that this causes. Instead, we collect
the error information from the driver (to avoid changing that API), and
don't return it to the caller.

Change-Id: I1e35afe01764d5c8f0efd04f8949d333ffb688c1
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>

Add *.bin extension to UART recovery images archive name.
Such naming will cause the UART recovery images to be copied to the
Buildroot output folder upon flash image build.

Change-Id: I6992df1ab2ded725bed58e5baf245ae92c4cb289
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

Marvell uses RAM address 0x0 for loading BL33 stage images.
When ATF is built with DEBUG=1, its IO subsystem fails on
assert checking the destination RAM address != 0.
This patch adds PLAT_ALLOW_ZERO_ADDR_COPY to A3K platform
allowing to bypass the above check in debug mode.

Change-Id: I687e35cb2e9dc3166bdaa81b3904c20b784c5c6a
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

The polarity inversion for USB was not tested due to lack of hw design
which requires it. Currently all supported boards doesn't require USB
phy polarity inversion, therefore COMPHY_POLARITY_NO_INVERT is set for
all boards. Enable the option for the ones that need it.

Change-Id: Ia5f2ee313a93962e94963e2dd8a759ef6d9da369
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

The cp110 comphy has ability to invert RX and/or TX polarity. Polarity
depends on board design. Currently all supported boards doesn't require
SATA phy polarity invert, therefore COMPHY_POLARITY_NO_INVERT is set for
all boards.

Change-Id: Ifd0bc6aaf8a76a0928132b197422f3193cf020d5
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

ERRATA ID: FE-4265711 - Incorrect CNTVAL reading

CNTVAL reflects the global system counter value in binary format.
Due to this erratum, the CNTVAL value presented to the processor
may be incorrect for several clock cycles.

Workaround: Override the default value of AP Register Device General
control 20 [19:16] and AP Register Device General Control 21 [11:8]
to the value of 0x3.

Change-Id: I1705608d08acd9631ab98d6f7ceada34d6b8336f
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Signed-off-by: Marcin Wojtas <mw@semihalf.com>

If the user tries to change BUILD_BASE to put the build products outside
the build tree the compile will fail due to hard coded assumptions that
$BUILD_BASE is a relative path. Fix by using $(abspath $(BUILD_BASE))
to rationalize to an absolute path every time and remove the relative
path assumptions.

This patch also adds documentation that BUILD_BASE can be specified by
the user.
Signed-off-by: Grant Likely <grant.likely@arm.com>
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Ib1af874de658484aaffc672f30029b852d2489c8

CN-9130 has single CP0 inside the package and 2 additional one from MoChi
interface. In case of db-9130-modular board the MCI interface is routed to:
- on-board CP115 (MCI0)
- extension board CP115 (MCI1)

The board is based on DIMM DDR.

The 9130 has up to 3CP, and decoding windows looks like below:

  (free for further use)
 .----------. 0xf800 0000
 | CP2 CFG  |
 '----------' 0xf600 0000
 | CP1 CFG  |
 '----------' 0xf400 0000
 | CP0 CFG  |
 '----------' 0xf200 0000
 | AP CFG   |
 '----------' 0xf000 0000
  (free for further use)
 .----------. 0xec00 0000
 | SPI      |
 | MEM_MAP  | (Currently not opened)
 '----------' 0xe800 0000
 | PEX2_CP2 |
 '----------' 0xe700 0000
 | PEX1_CP2 |
 '----------' 0xe600 0000
 | PEX0-CP2 |
 '----------'
 .----------. 0xe500 0000
 | PEX2_CP1 |
 '----------' 0xe400 0000
 | PEX1_CP1 |
 '----------' 0xe300 0000
 | PEX0-CP1 |
 '----------'
 .----------. 0xe200 0000
 | PEX2-CP0 |
 '----------' 0xe100 0000
 | PEX1-CP0 |
 '----------' 0xe000 0000
 | PEX0-CP0 |
 | 512MB    |
 '----------' 0xc000 0000

Change-Id: Ia8eee4f96c1043753f74f9da437b9f72ce2d6eb0
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

As the preparation for adding the CN913x SoC family support
introduce code that enable SVC and the frequency handling
specific for the AP807 North Bridge.

Change-Id: Ibe34a511b49cd9671a2e53b77bdcfc644bb915e3
Signed-off-by: Alex Evraev <alexev@marvell.com>

Update AVS settings and remove unused macros.
This is a preparation patch for adding CN913x SoC
family support.

Change-Id: Ib1dd70885a316ed5763d0f4730d0e4734da117b7
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

Add CN913x case to bl2_plat_get_cp_count.
Fix loading of cp1/2 image. This is a preparation
patch for adding CN913x SoC family support.

Change-Id: Id84a30203d20572fc0dfd3f91ea395c199a85fe9
Signed-off-by: Ben Peled <bpeled@marvell.com>

Add support for “AVS reduction” feature at this mode for
7040 Dual Cluster operation mode at CPU=1600MHz

Change-Id: Ia72b10e0ccfad07568bf4c089ea3990173ae24b2
Signed-off-by: Alex Evraev <alexev@marvell.com>

the twin-die combined memory device should be treated as
X8 device and not as X16 one. This patch is required to
re-enable compilation after BLE (mv-ddr-marvell) firmware upgrade.

Change-Id: I41257ff2825164ebca85a84bbb8462d7b3447b97
Signed-off-by: Moti Buskila <motib@marvell.com>
Signed-off-by: Marcin Wojtas <mw@semihalf.com>

There is no need to open tree different IO window when there is
possibility of having one covering required range.

Change-Id: I9feae1fc583df1f7d97d28161cf7601f43513856
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

Update missing code releated to the BL32 payload.

Change-Id: I5cbe71921467c53c45be5510f950cefdacc110e1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>

The LLC SRAM will be enabled in OP-TEE OS for usage as secure storage.
The CCU have to prepare SRAM window, but point to the DRAM-0 target
until the SRAM is actually enabled.
This patch changes CCU SRAM window target to DRAM-0
Remove dependence between LLC_SRAM and LLC_ENABLE and update the
build documentation.
The SRAМ base moved to follow the OP-TEE SHMEM area (0x05400000)

Change-Id: I85c2434a3d515ec37da5ae8eb729e3280f91c456
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

Area used as trusted DRAM is 12MB in Marvell OP-TEE OS module.
It is followed by 4MB of shared memory.

Change-Id: If8edeeec5861b529408baca25f78c06a0a440d8c
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

Now when mg_conf_cm3 driver is present - move all relevant code there.

Change-Id: I444d9e877c450d6ee69ca3a49b547e4c3aeac0be
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

Implement function which will allow to start AP FW.

Change-Id: Ie0fc8ad138bf56b10809cdc92d1e5e96a2aaf33f
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

Add support for the iEi Puzzle-M801 board that is based on
the Marvell Armada 88F8040 SoC.

It supports 1 x 288-pin DIMM, DDR4 2400MHz up to 16 GB (ECC).

The iEi Puzzle-M801 board is using a custom MCU to handle board
power management. The MCU is managing the boards power LEDs, fans
and some other periferals. It's using UART for communication.
Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Change-Id: I0826ef8bf651b69aad5803184f20930ac7212ef8

Use the BOARD_DIR variable instead of PLAT_FAMILY_BASE variable for
determening the path of the system_power.c file.

The variable was not updated, when it was deprecated in a8k_common.mk
in commit 613bbde0

.
Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Change-Id: I9b4659a19ba3cd5c869d44c5d834b220f49136e8

Adjust the latest OP-TEE memory definitions to the
newest TF-A baseline.

Change-Id: Ib9c82b85f868adaf3c7285eb340486bda9c59c36
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

Add llc_sram_enable() and llc_sram_disable() APIs to Marvell
cache_lls driver.
Add LLC_SRAM definition to Marvell common makefile - disabled
by the default.
Add description of LLC_SRAM flag to the build documentation.

Change-Id: Ib348e09752ce1206d29268ef96c9018b781db182
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

Extend the CCU tables with secure SRAM window in all board
setups that uses SoCs based on AP806/AP807 North Bridges

Change-Id: I4dc315e4ea847562ac8648d8a8739244b548c70e
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

It is not needed to reserve 64MB for FIP. Limit this to 4MB
for both supported Armada SoC families.

Change-Id: I58a8ce4408a646fe1afd3c1ea1ed54007c8d205d
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
[Extract from bigger commit]
Signed-off-by: Marcin Wojtas <mw@semihalf.com>