GitLab

NODE_EXTERN is the slave node which represents an external wake
source.
Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com>
Acked-by: Will Wong <willw@xilinx.com>

With new EEMI APIs addition, version is updated to 1.0
Signed-off-by: Jolly Shah <jollys@xilinx.com>

These are empty functions with no logic right now. Code
will be added in subsequent commits.
Signed-off-by: Rajan Vaja <rajanv@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>

Implement ioctl APIs which uses MMIO operations
to control RPU operations. Below IOCTLs are supported
in this patch:
  * Get RPU operation mode
  * Set RPU operation mode
  * Configure RPU boot address (OCM/TCM)
  * Configure TCM combined mode
Signed-off-by: Rajan Vaja <rajanv@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>

Implement pin control APIs which uses MMIO operations
to set/get functions for the given pin.
Signed-off-by: Rajan Vaja <rajanv@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>

Add wrappers for pin control APIs. Actual implementation of
these APIs would be done in subsequent changes.
Signed-off-by: Rajan Vaja <rajanv@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>

Add new function and node IDs supported by PMUFW in
function list and node list respectively.
Signed-off-by: Rajan Vaja <rajanv@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>

To make software license auditing simpler, use SPDX[0] license
identifiers instead of duplicating the license text in every file.

NOTE: Files that have been imported by FreeBSD have not been modified.

[0]: https://spdx.org/



Change-Id: I80a00e1f641b8cc075ca5a95b10607ed9ed8761a
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>

Add support to provide silicon id to non-secure
software through SMC.
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>

[ sb
Move zynqmp_get_silicon_id outside of compile guards to avoid build
errors.
]
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>

This patch adds pm_fpga_load() and pm_fpga_get_status() API's to provide
the Access to the xilfpga library to load the bitstream into zynqmp
PL region.
Signed-off-by: Nava kishore Manne <navam@xilinx.com>

This patch adds a new pm ID to sync with PMUFW ID numbers.
Signed-off-by: Nava kishore Manne <navam@xilinx.com>

During system suspend, identify slaves which are configured
as wake sources and call pm_set_wakeup_source API for each of them.

Identifying if device may wake the system is done by checking if any
interrupt of that device is enabled in GICD_ISENABLER when the APU is
about to enter SUSPEND_TO_RAM state. If such interrupt is found,
pm_set_wakeup_source is called with corresponding PM node ID as
argument.
Signed-off-by: Filip Drazic <filip.drazic@aggios.com>

Signed-off-by: Filip Drazic <filip.drazic@aggios.com>

The state argument of the pm_self_suspend API encodes the state to
which the APU intends to suspend. The state can be:
- PM_APU_STATE_CPU_IDLE - processor power down, all memories remain
  on
- PM_APU_STATE_SUSPEND_TO_RAM - all processors powered down, L2$
  powered down, all OCM banks in retention and DDR in
  self-refresh.
The calls for setting requirements for L2$ and OCM banks are now
redundant and removed.
Signed-off-by: Filip Drazic <filip.drazic@aggios.com>
[ sb
 - remove redundant #defines
]
Signed-off-by: Sören Brinkmann <soren.brinkmann@xilinx.com>

Nodes represent IPI dedicated to the RPU (not accessible by APU)
Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com>

NODE_IPI_APU is the node ID of APU's IPI device. If APU should be
woken-up on an IPI from FPD power down, this node shall be set as
the wake-up source upon suspend.
Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com>

Signed-off-by: Anes Hadziahmetagic <anes.hadziahmetagic@aggios.com>
Signed-off-by: Filip Drazic <filip.drazic@aggios.com>
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>

The Xilinx Zynq UltraScale+ MPSOC containes a quad A53 cluster. This
patch adds the platform port for that SoC.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>