Skip to content

GitLab

Switch branch/tag
  1. 09 Jul, 2021 1 commit
  3. 29 Jun, 2021 1 commit
  5. 28 Jun, 2021 1 commit
    • Max Shvetsov's avatar
      feat(sve): enable SVE for the secure world · 0c5e7d1c
      Max Shvetsov authored 
      

Enables SVE support for the secure world via ENABLE_SVE_FOR_SWD.
ENABLE_SVE_FOR_SWD defaults to 0 and has to be explicitly set by the
platform. SVE is configured during initial setup and then uses EL3
context save/restore routine to switch between SVE configurations for
different contexts.
Reset value of CPTR_EL3 changed to be most restrictive by default.
Signed-off-by: default avatarMax Shvetsov <maksims.svecovs@arm.com>
Change-Id: I889fbbc2e435435d66779b73a2d90d1188bf4116
      0c5e7d1c
  7. 23 Jun, 2021 2 commits
  9. 14 Jun, 2021 1 commit
  11. 04 Jun, 2021 2 commits
  13. 02 Jun, 2021 1 commit
    • Pali Rohár's avatar
      fix(plat/marvell/a3720/uart): fix UART parent clock rate determination · 5a91c439
      Pali Rohár authored 
      

The UART code for the A3K platform assumes that UART parent clock rate
is always 25 MHz. This is incorrect, because the xtal clock can also run
at 40 MHz (this is board specific).

The frequency of the xtal clock is determined by a value on a strapping
pin during SOC reset. The code to determine this frequency is already in
A3K's comphy driver.

Move the get_ref_clk() function from the comphy driver to a separate
file and use it for UART parent clock rate determination.
Signed-off-by: default avatarPali Rohár <pali@kernel.org>
Change-Id: I8bb18a2d020ef18fe65aa06ffa4ab205c71be92e
      5a91c439
  15. 28 May, 2021 1 commit
  17. 27 May, 2021 2 commits
  19. 25 May, 2021 1 commit
  21. 19 May, 2021 1 commit
    • Manish V Badarkhe's avatar
      feat(hw_crc): add support for HW computed CRC · a1cedadf
      Manish V Badarkhe authored 
      

Added support for HW computed CRC using Arm ACLE intrinsics.
These are built-in intrinsics available for ARMv8.1-A, and
onwards.
These intrinsics are enabled via '-march=armv8-a+crc' compile
switch for ARMv8-A (supports CRC instructions optionally).

HW CRC support is enabled unconditionally in BL2 for all Arm
platforms.

HW CRC calculation is verified offline to ensure a similar
result as its respective ZLib utility function.

HW CRC calculation support will be used in the upcoming
firmware update patches.

Change-Id: Ia2ae801f62d2003e89a9c3e6d77469b5312614b3
Signed-off-by: default avatarManish V Badarkhe <Manish.Badarkhe@arm.com>
      a1cedadf
  23. 17 May, 2021 1 commit
  25. 14 May, 2021 1 commit
    • Alexei Fedorov's avatar
      fix(security): Set MDCR_EL3.MCCD bit · 12f6c064
      Alexei Fedorov authored 
      

This patch adds setting MDCR_EL3.MCCD in 'el3_arch_init_common'
macro to disable cycle counting by PMCCNTR_EL0 in EL3 when
FEAT_PMUv3p7 is implemented. This fixes failing test
'Leak PMU CYCLE counter values from EL3 on PSCI suspend SMC'
on FVP models with 'has_v8_7_pmu_extension' parameter set to
1 or 2.
Signed-off-by: default avatarAlexei Fedorov <Alexei.Fedorov@arm.com>
Change-Id: I2ad3ef501b31ee11306f76cb5a61032ecfd0fbda
      12f6c064
  27. 13 May, 2021 1 commit
    • Daniel Boulby's avatar
      feat(spmd): add support for FFA_SPM_ID_GET · 70c121a2
      Daniel Boulby authored 
      

Handle calls to the FFA_SPM_ID_GET interface. If FFA_SPM_ID_GET is
invoked from the non-secure physical FF-A instance, return the SPMC id
(defined in the SPMC manifest). If FFA_SPM_ID_GET is invoked from
the secure physical FF-A instance (e.g. the SPMC), return the SPMD id.

Change-Id: Id6d4e96b1da2510386d344e09c4553dba01227ec
Signed-off-by: default avatarDaniel Boulby <daniel.boulby@arm.com>
      70c121a2
  29. 29 Apr, 2021 1 commit
  31. 28 Apr, 2021 3 commits
    • David Horstmann's avatar
      refactor(plat/arm): store UUID as a string, rather than ints · 7d111d99
      David Horstmann authored 
      

NOTE: Breaking change to the way UUIDs are stored in the DT

Currently, UUIDs are stored in the device tree as
sequences of 4 integers. There is a mismatch in endianness
between the way UUIDs are represented in memory and the way
they are parsed from the device tree. As a result, we must either
store the UUIDs in little-endian format in the DT (which means
that they do not match up with their string representations)
or perform endianness conversion after parsing them.

Currently, TF-A chooses the second option, with unwieldy
endianness-conversion taking place after reading a UUID.

To fix this problem, and to make it convenient to copy and
paste UUIDs from other tools, change to store UUIDs in string
format, using a new wrapper function to parse them from the
device tree.

Change-Id: I38bd63c907be14e412f03ef0aab9dcabfba0eaa0
Signed-off-by: default avatarDavid Horstmann <david.horstmann@arm.com>
      7d111d99
    • David Horstmann's avatar
      feat(fdt): introduce wrapper function to read DT UUIDs · d13dbb6f
      David Horstmann authored 
      

TF-A does not have the capability to read UUIDs in string form
from the device tree. This capability is useful for readability,
so add a wrapper function, fdtw_read_uuid() to parse UUIDs from
the DT.
This function should parse a string of the form:

"aabbccdd-eeff-4099-8877-665544332211"

to the byte sequence in memory:

[aa bb cc dd ee ff 40 99 88 77 66 55 44 33 22 11]

Change-Id: I99a92fbeb40f4f4713f3458b36cb3863354d2bdf
Signed-off-by: default avatarDavid Horstmann <david.horstmann@arm.com>
      d13dbb6f
    • Manish V Badarkhe's avatar
      refactor(plat/arm): replace FIP base and size macro with a generic name · 49e9ac28
      Manish V Badarkhe authored 
      

Replaced PLAT_ARM_FIP_BASE and PLAT_ARM_FIP_MAX_SIZE macro with a
generic name PLAT_ARM_FLASH_IMAGE_BASE and PLAT_ARM_FLASH_IMAGE_MAX_SIZE
so that these macros can be reused in the subsequent GPT based support
changes.

Change-Id: I88fdbd53e1966578af4f1e8e9d5fef42c27b1173
Signed-off-by: default avatarManish V Badarkhe <Manish.Badarkhe@arm.com>
      49e9ac28
  33. 27 Apr, 2021 1 commit
  35. 26 Apr, 2021 1 commit
    • Chris Kay's avatar
      docs(license): rectify `arm-gic.h` license · 3dbbbca2
      Chris Kay authored 
      

The `arm-gic.h` file distributed by the Linux kernel is disjunctively
dual-licensed under the GPL-2.0 or MIT licenses, but the BSD-3-Clause
license has been applied in violation of the requirements of both
licenses. This change ensures the file is correctly licensed under the
terms of the MIT license, and that we comply with it by distributing a
copy of the license text.

Change-Id: Ie90066753a5eb8c0e2fc95ba43e3f5bcbe2fa459
Signed-off-by: default avatarChris Kay <chris.kay@arm.com>
      3dbbbca2
  37. 21 Apr, 2021 3 commits
    • Yann Gautier's avatar
      Add PIE support for AARCH32 · 4324a14b
      Yann Gautier authored 
      

Only BL32 (SP_min) is supported at the moment, BL1 and BL2_AT_EL3 are just
stubbed with _pie_fixup_size=0.
The changes are an adaptation for AARCH32 on what has been done for
PIE support on AARCH64.
The RELA_SECTION is redefined for AARCH32, as the created section is
.rel.dyn and the symbols are .rel*.

Change-Id: I92bafe70e6b77735f6f890f32f2b637b98cf01b9
Signed-off-by: default avatarYann Gautier <yann.gautier@st.com>
      4324a14b
    • Yann Gautier's avatar
      Avoid the use of linker *_SIZE__ macros · fb4f511f
      Yann Gautier authored 
      The use of end addresses is preferred over the size of sections.
This was done for some AARCH64 files for PIE with commit [1],
and some extra explanations can be found in its commit message.
Align the missing AARCH64 files.

For AARCH32 files, this is required to prepare PIE support introduction.

 [1] f1722b69

 ("PIE: Use PC relative adrp/adr for symbol reference")

Change-Id: I8f1c06580182b10c680310850f72904e58a54d7d
Signed-off-by: default avatarYann Gautier <yann.gautier@st.com>
      fb4f511f
    • Alexei Fedorov's avatar
      Plat FVP: Fix Generic Timer interrupt types · dfa6c540
      Alexei Fedorov authored 
      

The Arm Generic Timer specification mandates that the
interrupt associated with each timer is low level triggered,
see:

Arm Cortex-A76 Core:
"Each timer provides an active-LOW interrupt output to the SoC."

Arm Cortex-A53 MPCore Processor:
"It generates timer events as active-LOW interrupt outputs and
event streams."

The following files in fdts\

fvp-base-gicv3-psci-common.dtsi
fvp-base-gicv3-psci-aarch32-common.dtsi
fvp-base-gicv2-psci-aarch32.dts
fvp-base-gicv2-psci.dts
fvp-foundation-gicv2-psci.dts
fvp-foundation-gicv3-psci.dts

describe interrupt types as edge rising
IRQ_TYPE_EDGE_RISING = 0x01:

interrupts = <1 13 0xff01>,
             <1 14 0xff01>,
             <1 11 0xff01>,
             <1 10 0xff01>;

, see include\dt-bindings\interrupt-controller\arm-gic.h:

which causes Linux to generate the warnings below:
arch_timer: WARNING: Invalid trigger for IRQ5, assuming level low
arch_timer: WARNING: Please fix your firmware

This patch adds GIC_CPU_MASK_RAW macro definition to
include\dt-bindings\interrupt-controller\arm-gic.h,
modifies interrupt type to IRQ_TYPE_LEVEL_LOW and
makes use of type definitions in arm-gic.h.

Change-Id: Iafa2552a9db85a0559c73353f854e2e0066ab2b9
Signed-off-by: default avatarAlexei Fedorov <Alexei.Fedorov@arm.com>
      dfa6c540
  39. 20 Apr, 2021 3 commits
  41. 14 Apr, 2021 1 commit
  43. 13 Apr, 2021 1 commit
  45. 07 Apr, 2021 1 commit
    • Max Shvetsov's avatar
      Fix: Remove save/restore of EL2 timer registers · a7cf2743
      Max Shvetsov authored 
      

Since there is a secure and non-secure version of the timer registers
there is no need to preserve their context in EL3.
With that, following registers were removed from EL3 save/restore
routine:
	cnthps_ctl_el2
	cnthps_tval_el2
	cnthps_cval_el2
	cnthvs_ctl_el2
	cnthvs_tval_el2
	cnthvs_cval_el2
	cnthp_ctl_el2
	cnthp_cval_el2
	cnthp_tval_el2
	cnthv_ctl_el2
	cnthv_cval_el2
	cnthv_tval_el2
Signed-off-by: default avatarMax Shvetsov <maksims.svecovs@arm.com>
Change-Id: I6e2fc09c74a7375c4fccc11f12af4e39e6dc616b
      a7cf2743
  47. 01 Apr, 2021 1 commit
  49. 31 Mar, 2021 1 commit
  51. 26 Mar, 2021 1 commit
    • Bharat Gooty's avatar
      driver: brcm: add i2c driver · 48c6a6b6
      Bharat Gooty authored 
      

Broadcom I2C controller driver. Follwoing API's are supported:-
- i2c_init() Intialize ethe I2C controller
- i2c_probe()
- i2c_set_bus_speed() Set the I2C bus speed
- i2c_get_bus_speed() Get the current bus speed
- i2c_recv_byte() Receive one byte of data.
- i2c_send_byte() Send one byteof data
- i2c_read_byte() Read single byte of data
- i2c_read() Read multiple bytes of data
- i2c_write_byte Write single byte of data
- i2c_write() Write multiple bytes of data

This driver is verified by reading the DDR SPD data.
Signed-off-by: default avatarBharat Gooty <bharat.gooty@broadcom.com>
Change-Id: I2d7fe53950e8b12fab19d0293020523ff8b74e13
      48c6a6b6
  53. 24 Mar, 2021 5 commits