GitLab

Currently, soc-revision information is not available for arm
platforms hence disabled 'SMCCC_ARCH_SOC_ID' feature for all arm
platforms.

Change-Id: I1ab878c6a4c8fecfff63bc6dde83e3ecefe20279
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

Currently, 'SMCCC_ARCH_FEATURES' SMC call handler unconditionally
returns 'SMC_OK' for 'SMCCC_ARCH_SOC_ID' function. This seems to
be not correct for the platform which doesn't implement soc-id
functionality i.e. functions to retrieve both soc-version and
soc-revision.
Hence introduced a platform function which will check whether SMCCC
feature is available for the platform.

Also, updated porting guide for the newly added platform function.

Change-Id: I389f0ef6b0837bb24c712aa995b7176117bc7961
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

In BL2, fw_config's population happened before the cache gets
enabled.
Hence to boost the performance, moved fw_config's population
after cache gets enabled (i.e. after MMU gets enabled).
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I2e75cabd76b1cb7a660f6b72f409ab40d2877284

Updated the function 'set_fw_config_info' to make it generic
by doing below changes:

1. Rename function name from 'set_fw_config_info' to 'set_config_info'
2. Take image_id as an argument so that this function can set any
   config information.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: Icf29e19d3e9996d8154d84dbbbc76712fab0f0c1

Update the data type of the member 'config_max_size' present in the
structure 'dyn_cfg_dtb_info_t' to uint32_t.

This change is being done so that dyn_cfg_dtb_info_t and image_info
structure should use same data type for maximum size.

Change-Id: I9b5927a47eb8351bbf3664b8b1e047ae1ae5a260
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

Currently, the need for firmware update is being checked twice
in the code hence modifications are done to do this check only
once and set the global variable.
Then this global variable helps to decide whether to go for
normal boot or firmware update flow.

Change-Id: I8469284555a8039786f34670f9dc4830f87aecc1
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

Renamed node for trusted boot fw config from 'plat_arm_bl2' to
'tb_fw-config'.

Change-Id: I2e16b6f4d272292ec1855daafd014e851436dd9b
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

This patch adds support for Measured Boot functionality
to FVP platform code. It also defines new properties
in 'tpm_event_log' node to store Event Log address and
it size
'tpm_event_log_sm_addr'
'tpm_event_log_addr'
'tpm_event_log_size'
in 'event_log.dtsi' included in 'fvp_tsp_fw_config.dts'
and 'fvp_nt_fw_config.dts'. The node and its properties
are described in binding document
'docs\components\measured_boot\event_log.rst'.

Change-Id: I087e1423afcb269d6cfe79c1af9c348931991292
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

Implement IMX_SIP_AARCH32 to let AArch64 Bootloader could issue
SIP call to switch to AArch32 mode to run OS.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Change-Id: I38b04ef909a6dbfba5ded12a7bb6e799a3935a66

This patch adds support for Measured Boot driver functionality
in BL1 and BL2 code.

Change-Id: I7239a94c3e32b0a3e9e73768a0140e0b52ab0361
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

This patch adds support for Event Log generation required
for Measured Boot functionality.

Change-Id: I34f05a33565e6659e78499d62cc6fb00b7d6c2dc
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

This patch adds support for Measured Boot driver functionality
in common Arm platform code.

Change-Id: If049dcf8d847c39023b77c0d805a8cf5b8bcaa3e
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

TBBR authentication framework depends on the plat_get_rotpk_info()
function to return the pointer to the Root of Trust Public Key (ROTPK)
stored in the platform along with its length. Add this function for
RD-Daniel Config-XLR platform to support Trusted Board Boot. The
function makes use of the wrapper function provided by the arm common
trusted board boot function to get the ROTPK hash.

Change-Id: I509e2f7e88cc2167e1732a971d71dc131d3d4b01
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>

TBBR authentication framework depends on the plat_get_rotpk_info()
function to return the pointer to the Root of Trust Public Key (ROTPK)
stored in the platform along with its length. Add this function for
RD-Daniel platform to support Trusted Board Boot. The function makes use
of the wrapper function provided by the arm common trusted board boot
function to get the ROTPK hash.

Change-Id: I6c2826a7898664afea19fd62432684cfddd9319a
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>

This patch moves all GICv2 driver files into new added
'gicv2.mk' makefile for the benefit of the generic driver
which can evolve in the future without affecting platforms.

NOTE: Usage of 'drivers/arm/gic/common/gic_common.c' file
is now deprecated and platforms with GICv2 driver need to
be modified to include 'drivers/arm/gic/v2/gicv2.mk' in
their makefiles.

Change-Id: Ib10e71bdda0e5c7e80a049ddce2de1dd839602d1
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

Getting the actual size of a DTB blob is useful beyond the Raspberry Pi
port, so let's move this helper to a common header.

Change-Id: Ia5be46e9353ca859a1e5ad9e3c057a322dfe22e2
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

This change implements platform services for stm32mp1 to expose clock
and reset controllers over SCMI clock and reset domain protocols
in sp_min firmware.

Requests execution use a fastcall SMC context using a SiP function ID.
The setup allows the create SCMI channels by assigning a specific
SiP SMC function ID for each channel/agent identifier defined. In this
change, stm32mp1 exposes a single channel and hence expects single
agent at a time.

The input payload in copied in secure memory before the message
in passed through the SCMI server drivers. BL32/sp_min is invoked
for a single SCMI message processing and always returns with a
synchronous response message passed back to the caller agent.

This change fixes and updates STM32_COMMON_SIP_NUM_CALLS that was
previously wrongly set 4 whereas only 1 SiP SMC function ID was to
be counted. STM32_COMMON_SIP_NUM_CALLS is now set to 3 since the
2 added SiP SMC function IDs for SCMI services.

Change-Id: Icb428775856b9aec00538172aea4cf11e609b033
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>

while mapping SPMC manifest page in the SPMD translation regime the
mapped size was resolved to zero if SPMC manifest base address is PAGE
aligned, causing SPMD to abort.

To fix the problem change mapped size to PAGE_SIZE if manifest base is
PAGE aligned.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I06cd39dbefaf492682d9bbb0c82b950dd31fb416

Signed-off-by: Bharat Gooty <bharat.gooty@broadcom.com>
Change-Id: I490d7e4d49bd9f5a62d343a264a1e14c2066ceca

Change-Id: I4f5efcd7638a25c317382b51f05e6b9aa283d068
Signed-off-by: Roman Bacik <roman.bacik@broadcom.com>
Signed-off-by: Bharat Gooty <bharat.gooty@broadcom.com>

BL2 size gets increased due to the libfdt library update and 
that eventually cause no-optimization build failure for BL2 as below:
aarch64-none-elf-ld.bfd: BL2 image has exceeded its limit.
aarch64-none-elf-ld.bfd: region `RAM' overflowed by 4096 bytes
Makefile:1070: recipe for target 'build/fvp/debug/bl2/bl2.elf' failed
make: *** [build/fvp/debug/bl2/bl2.elf] Error 1

Fixed build failure by increasing BL2 image size limit by 4Kb.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I92a57eb4db601561a98e254b64994bb921a88db3

There is no need to open tree different IO window when there is
possibility of having one covering required range.

Change-Id: I9feae1fc583df1f7d97d28161cf7601f43513856
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

Update missing code releated to the BL32 payload.

Change-Id: I5cbe71921467c53c45be5510f950cefdacc110e1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>

The LLC SRAM will be enabled in OP-TEE OS for usage as secure storage.
The CCU have to prepare SRAM window, but point to the DRAM-0 target
until the SRAM is actually enabled.
This patch changes CCU SRAM window target to DRAM-0
Remove dependence between LLC_SRAM and LLC_ENABLE and update the
build documentation.
The SRAМ base moved to follow the OP-TEE SHMEM area (0x05400000)

Change-Id: I85c2434a3d515ec37da5ae8eb729e3280f91c456
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

Area used as trusted DRAM is 12MB in Marvell OP-TEE OS module.
It is followed by 4MB of shared memory.

Change-Id: If8edeeec5861b529408baca25f78c06a0a440d8c
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

Now when mg_conf_cm3 driver is present - move all relevant code there.

Change-Id: I444d9e877c450d6ee69ca3a49b547e4c3aeac0be
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

Implement function which will allow to start AP FW.

Change-Id: Ie0fc8ad138bf56b10809cdc92d1e5e96a2aaf33f
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

The i.MX 8MP Media Applications Processor is part of the growing
i.MX8M family targeting the consumer and industrial market. It brings
an effective Machine Learning and AI accelerator that enables a new
class of applications. It is built in 14LPP to achieve both high
performance and low power consumption and relies on a powerful fully
coherent core complex based on a quad core Arm Cortex-A53 cluster and
Cortex-M7 low-power coprocessor, audio digital signal processor, machine
learning and graphics accelerators.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I98311ebc32bee20af05031492e9fc24d06e55f4a

Included cot_descriptors.dtsi in platform device tree
(fvp_tb_fw_config.dts).

Also, updated the maximum size of tb_fw_config to 0x1800
in order to accomodate the device tree for CoT descriptors.

Follow up patch will parse the device tree for these CoT descriptors
and fill the CoT descriptor structures at runtime instead of using
static CoT descriptor structures in the code base.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I90122bc713f6842b82fb019b04caf42629b4f45a

Although the GPC provides the similar functions for all the
i.MX8M SoC family, the HW register offset and bit defines
still have some slight difference, so move the hw reg
offset & most of the bitfield defines in 'gpc_reg.h' that
is specific to each SoC.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I291c435fe98c2f6e6ff8fe0c715ff3a83daa6a0f

The memory layout for the FPGA is fairly uniform for most of the FPGA
images, and we already assume that DRAM starts at 2GB by default.

Prepopulate PRELOADED_BL33_BASE and FPGA_PRELOADED_DTB_BASE to some
sane default values, to simplify building some stock image.
If people want to deviate from that, they can always override those
addresses on the make command line.

Change-Id: I2238fafb3f8253a01ad2d88d45827c141d9b29dd
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

To support FPGAs with those cores as well, as the respective cpulib
files to the Makefile.

Change-Id: I1a60867d5937be88b32b210c7817be4274554a76
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

The maximum number of clusters is currently set to 2, which is quite
limiting. As there are FPGA images with 4 clusters, let's increase the
limit to 4.

Change-Id: I9a85ca07ebbd2a018ad9668536d867ad6b75e537
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

Introduce helper functions stm32mp_register_secure_gpio() and
stm32mp_register_non_secure_gpio() for drivers to register a
GPIO pin as secure or non-secure.

These functions are stubbed when shared resource driver is not
embedded in the BL image so that drivers do not bother whether they
shall register or not their resources.

Change-Id: I1fe98576c072ae31f75427c9ac5c9f6c4f1b6ed1
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>

Introduce helper functions stm32mp_register_secure_periph_iomem()
and stm32mp_register_non_secure_periph_iomem() for drivers to
register a resource as secure or non-secure based on its SoC
interface registers base address.

These functions are stubbed when shared resources driver is not
embedded (!STM32MP_SHARED_RESOURCES) so that drivers embedded
in other BL stages do not bother whether they shall register or
not their resources.

Change-Id: Icebd05a930afc5964bc4677357da5d1b23666066
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>

Update implementation of stm32mp_nsec_can_access_reset() based
on the registering of the shared resources.

Querying registering state locks further registration of
peripherals.

Change-Id: I5f38f2a3481780b9a71939d95984c4821c537aa4
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>

Update implementation of stm32mp_nsec_can_access_clock() based
on the registering of the shared resources.

Querying registering state locks further registration of peripherals.

Change-Id: If68f6d4a52c4742ba66244c6ea2d9afa08404137
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>

Define helper functions stm32mp_register_secure_periph() and
stm32mp_register_non_secure_periph() for platform drivers to
register a shared resource assigned to respectively secure
or non-secure world.

Some resources are related to clock resources. When a resource is
registered as secure, ensure its clock dependencies are also
registered as secure. Registering a non-secure resource does not
mandate its clock dependencies are also registered as non-secure.

Change-Id: I74975be8976b8d3bf18dcc807541a072803af6e3
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>

Define from helper functions to get a human readable string
identifier from a shared resource enumerated ID. Use them to
make debug traces more friendly peripheral registering functions.

Change-Id: I9e207b8ce1d1e9250e242ca7e15461b9a1532f40
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>

This patch performs the following:

- Creating two corstone700 platforms under corstone700 board:

  fvp and fpga

- Since the FVP and FPGA have IP differences, this commit provides a specific DTS for each platform
- The platform can be specified using the TARGET_PLATFORM Makefile variable
(possible values are: fvp or fpga)
- Allowing to use u-boot by:
  - Enabling NEED_BL33 option
  - Fixing non-secure image base: For no preloaded bl33 we want to
    have the NS base set on shared ram. Setup a memory map region
    for NS in shared map and set the bl33 address in the area.
- Setting the SYS_COUNTER_FREQ_IN_TICKS based on the selected
platform
- Setting ARM_MAP_SHARED_RAM and ARM_MAP_NS_SHARED_RAM to use MT_MEMORY

Change-Id: I4c8ac3387acb1693ab617bcccab00d80e340c163
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>