GitLab

The CPUACTLR_EL1 register on Cortex-A57 CPUs supports a bit to enable
non-cacheable streaming enhancement. Platforms can set this bit only
if their memory system meets the requirement that cache line fill
requests from the Cortex-A57 processor are atomic.

This patch adds support to enable higher performance non-cacheable load
forwarding for such platforms. Platforms must enable this support by
setting the 'A57_ENABLE_NONCACHEABLE_LOAD_FWD' flag from their
makefiles. This flag is disabled by default.

Change-Id: Ib27e55dd68d11a50962c0bbc5b89072208b4bac5
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

When TF-A is built with RESET_TO_BL31=1 option, BL31 is the
first image to be run and should have all the memory allocated
to it except for the memory reserved for Shared RAM at the start
of Trusted SRAM.
This patch fixes FVP BL31 load address and its image size for
RESET_TO_BL31=1 option. BL31 startup address should be set to
0x400_1000 and its maximum image size to the size of Trusted SRAM
minus the first 4KB of shared memory.
Loading BL31 at 0x0402_0000 as it is currently stated in
'\docs\plat\arm\fvp\index.rst' causes EL3 exception when the
image size gets increased (i.e. building with LOG_LEVEL=50)
but doesn't exceed 0x3B000 not causing build error.

Change-Id: Ie450baaf247f1577112f8d143b24e76c39d33e91
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

This patch adds information on the PMU configuration registers
and security considerations related to the PMU.
Signed-off-by: Petre-Ionut Tudor <petre-ionut.tudor@arm.com>
Change-Id: I36b15060b9830a77d3f47f293c0a6dafa3c581fb

Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I8c2e6dc98f2f30a81f4f80cc0ca1232fed7a53c9

At the moment, address demangling is only used by the backtrace
functionality. However, at some point, other parts of the TF-A
codebase may want to use it.
The 'demangle_address' function is replaced with a single XPACI
instruction which is also added in 'do_crash_reporting()'.
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Change-Id: I4424dcd54d5bf0a5f9b2a0a84c4e565eec7329ec

Introduce macro 'CSS_SGI_CHIP_COUNT' to allow Arm CSS platforms with
multi-chip support to define number of chiplets on the platform. By
default, this flag is set to 1 and does not affect the existing single
chip platforms.

For multi-chip platforms, override the default value of
CSS_SGI_CHIP_COUNT with the number of chiplets supported on the
platform. As an example, the command below sets the number of chiplets
to two on the RD-N1-Edge multi-chip platform:

export CROSS_COMPILE=<path-to-cross-compiler>
make PLAT=rdn1edge CSS_SGI_CHIP_COUNT=2 ARCH=aarch64 all

Change-Id: If364dc36bd34b30cc356f74b3e97633933e6c8ee
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>

Change-Id: I606f9491fb6deebc6845c5b9d7db88fc5c895bd9
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>

Use the firmware configuration framework to store the io_policies
information inside the configuration device tree instead of the static
structure in the code base.

The io_policies required by BL1 can't be inside the dtb, as this one is
loaded by BL1, and only available at BL2.

This change currently only applies to FVP platform.

Change-Id: Ic9c1ac3931a4a136aa36f7f58f66d3764c1bfca1
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>

Enables usage of ARM_ROTPK_LOCATION=regs for FVP board.
Removes hard-coded developer keys. Instead, setting
ARM_ROTPK_LOCATION=devel_* takes keys from default directory.
In case of ROT_KEY specified - generates a new hash and replaces the
original.

Note: Juno board was tested by original feature author and was not tested
for this patch since we don't have access to the private key. Juno
implementation was moved to board-specific file without changing
functionality. It is not known whether byte-swapping is still needed
for this platform.

Change-Id: I0fdbaca0415cdcd78f3a388551c2e478c01ed986
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>

This patch expands the coding style documentation, splitting it
into two documents: the core style rules and extended guidelines.
Note that it does not redefine or change the coding style (aside
from section 4.6.2) - generally, it is only documenting the
existing style in more detail.

The aim is for the coding style to be more readable and, in turn,
for it to be followed by more people. We can use this as a more
concrete reference when discussing the accepted style with external
contributors.

Change-Id: I87405ace9a879d7f81e6b0b91b93ca69535e50ff
Signed-off-by: Paul Beesley <paul.beesley@arm.com>
Signed-off-by: Petre-Ionut Tudor <petre-ionut.tudor@arm.com>

BL2 is unconditionally setting 0 (OPTEE_AARCH64) in arg0 even when the
BL32 image is 32bit (OPTEE_AARCH32). This is causing the boot to hang
when ATOS (32bit Amlogic BL32 binary-only TEE OS) is used.

Since we are not aware of any Amlogic platform shipping a 64bit version
of ATOS we can hardcode OPTEE_AARCH32 / MODE_RW_32 when using ATOS.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: Iaea47cf6dc48bf8a646056761f02fb81b41c78a3

Introduce the preliminary support for the Amlogic A113D (AXG) SoC.

This port is a minimal implementation of BL31 capable of booting
mainline U-Boot, Linux and chainloading BL32 (ATOS).

Tested on a A113D board.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: Ic4548fa2f7c48d61b485b2a6517ec36c53c20809

Since Sphinx 2.3.0 backquotes are replaced to \textasciigrave{} during
building latexpdf. Using this element in a \sphinxhref{} breaks the
build. In order to avoid this error backquotes must not be used in
external hyperlinks.
Signed-off-by: Imre Kis <imre.kis@arm.com>
Change-Id: Ie3cf454427e3d5a7b7f9829b42be45aebda7f0dd

The current URL for QEMU_EFI.fd is not found. Update the link to
point to the new one.

If you run the shell command as instructed, you will see this error:
  qemu-system-aarch64: keep_bootcon: Could not open 'keep_bootcon': No such file or directory

The part "console=ttyAMA0,38400 keep_bootcon root=/dev/vda2" is the
kernel parameter, so it must be quoted.

As of writing, QEMU v4.2.0 is the latest, but it does not work for
TF-A (It has been fixed in the mainline.) QEMU v4.1.0 works fine.

With those issues addressed, I succeeded in booting the latest kernel.

Tested with QEMU v4.1.0 and Linux 5.5 (defconfig with no modification).
Update the tested versions.

Change-Id: Ic85db0e688d67b1803ff890047d37de3f3db2daa
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Allows to select the chain of trust to use when the Trusted Boot feature
is enabled. This affects both the cert_create tool and the firmware
itself.

Right now, the only available CoT is TBBR.

Change-Id: I7ab54e66508a1416cb3fcd3dfb0f055696763b3d
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

Command to build HTML-formatted pages from docs:
make doc

Change-Id: I4103c804b3564fe67d8fc5a3373679daabf3f2e9
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

This patch adds 'calc_hash' function using Mbed TLS library
required for Measured Boot support.

Change-Id: Ifc5aee0162d04db58ec6391e0726a526f29a52bb
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

CPUECTLR_EL1.EXTLLC bit indicates the presense of internal or external
last level cache(LLC) in the system, the reset value is internal LLC.

To cater for the platforms(like N1SDP) which has external LLC present
introduce a new build option 'NEOVERSE_N1_EXTERNAL_LLC' which can be
enabled by platform port.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Ibf475fcd6fd44401897a71600f4eafe989921363

This implementation simply mimics that of BL31.

Change-Id: Ibbaa4ca012d38ac211c52b0b3e97449947160e07
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

This implementation simply mimics that of BL31.

I did not implement the ENABLE_PIE support for BL2_IN_XIP_MEM=1 case.
It would make the linker script a bit uglier.

Change-Id: If3215abd99f2758dfb232e44b50320d04eba808b
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

This lets the Linux kernel or any other image which expects an FDT in x0 be
loaded directly as BL33 without a separate bootloader on QEMU.
Signed-off-by: Andrew Walbran <qwandor@google.com>
Change-Id: Ia8eb4710a3d97cdd877af3b8aae36a2de7cfc654

Out of two possible implementation of Secure Partition Manager(SPM)
currently only Management mode (MM) design is supported and the support
for SPM based on SPCI Alpha 1 prototype has been removed.

Earlier both implementation used common build flag "ENABLE_SPM" but it
has since been decoupled and MM uses a separate build FLAG "SPM_MM".

Instructions to build it for FVP was still using "ENABLE_SPM", which has
beend corrected in this patch.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I505b98173d6051816436aa602ced6dbec4efc776

Parse the parameter structure the PLM populates, to populate the
bl32 and bl33 image structures.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I317072d1086f6cc6f90883c1b8b6d086ff57b443

Add new flags for storage support that must be used in the build
command line. Add the complete build steps for an OP-TEE configuration.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: I0c682f6eb0aab83aa929f4ba734d3151c264aeed

The LLVM linker replaces the GNU linker as default for the link on Clang
builds. It is possible to override the default linker by setting the LD build
flag.

The patch also updates the TF-A doc.

Change-Id: Ic08552b9994d4fa8f0d4863e67a2726c1dce2e35
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
Signed-off-by: Zelalem Aweke <zelalem.aweke@arm.com>

Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Change-Id: I2a7f38eaae3a78fc3caa37833af755c15e8236ce

This patch makes default build target as silicon instead of QEMU.
The default can be overwritten by specifying it through build flag
VERSAL_PLATFORM.
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: Ia4cb1df1f206db3e514e8ce969acca875e973ace

It's in fact mandatory. Seen with RPi firmware 1.20190925.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Change-Id: I80739b74f25817294adc52cfd26a3ec59c06f892

This toolchain provides multiple cross compilers and are publicly
available on developer.arm.com

We build TF-A in CI using:
AArch32 bare-metal target (arm-none-eabi)
AArch64 ELF bare-metal target (aarch64-none-elf)

Change-Id: I910200174d5bad985504d1af4a1ae5819b524003
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

NOTE for platform integrators:
   API `plat_psci_stat_get_residency()` third argument
   `last_cpu_idx` is changed from "signed int" to the
   "unsigned int" type.

Issue / Trouble points
1. cpu_idx is used as mix of `unsigned int` and `signed int` in code
with typecasting at some places leading to coverity issues.

2. Underlying platform API's return cpu_idx as `unsigned int`
and comparison is performed with platform specific defines
`PLAFORM_xxx` which is not consistent

Misra Rule 10.4:
The value of a complex expression of integer type may only be cast to
a type that is narrower and of the same signedness as the underlying
type of the expression.

Based on above points, cpu_idx is kept as `unsigned int` to match
the API's and low-level functions and platform defines are updated
where ever required
Signed-off-by: Deepika Bhavnani <deepika.bhavnani@arm.com>
Change-Id: Ib26fd16e420c35527204b126b9b91e8babcc3a5c

Creating a Change Log Template for ALL to update with relevant
new features, changes, fixes and known issues for each upcoming
release of Trusted Firmware-A.

The contents of this file should be added to the collective change log
at the time of release code freeze.
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Change-Id: Idfbdcef0d40b10312dc88b6e1cbe31856fda887e

This reverts commit de9bf1d8.

Change-Id: Iebb6297ce290a10ee850bf6a9c71e7eb530b085f

This toolchain provides multiple cross compilers and are publicly
available on www.developer.arm.com

We thoroughly test TF-A in CI using:
AArch32 bare-metal target (arm-none-eabi)
AArch64 ELF bare-metal target (aarch64-none-elf)

Change-Id: I2360a3ac6705c68dca781b85e9894867df255b3e
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

Some platforms are extremely memory constrained and must split BL31
between multiple non-contiguous areas in SRAM. Allow the NOBITS
sections (.bss, stacks, page tables, and coherent memory) to be placed
in a separate region of RAM from the loaded firmware image.

Because the NOBITS region may be at a lower address than the rest of
BL31, __RW_{START,END}__ and __BL31_{START,END}__ cannot include this
region, or el3_entrypoint_common would attempt to invalidate the dcache
for the entire address space. New symbols __NOBITS_{START,END}__ are
added when SEPARATE_NOBITS_REGION is enabled, and the dcached for the
NOBITS region is invalidated separately.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: Idedfec5e4dbee77e94f2fdd356e6ae6f4dc79d37

Erratum 1688305 is a Cat B erratum present in r0p0, r0p1 versions
of Hercules core. The erratum can be avoided by setting bit 1 of the
implementation defined register CPUACTLR2_EL1 to 1 to prevent store-
release from being dispatched before it is the oldest.

Change-Id: I2ac04f5d9423868b6cdd4ceb3d0ffa46e570efed
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

Change-Id: I91c192924433226b54d33e57d56d146c1c6df81b
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

Before adding any new SPM-related components we should first do
some cleanup around the existing SPM-MM implementation. The aim
is to make sure that any SPM-MM components have names that clearly
indicate that they are MM-related. Otherwise, when adding new SPM
code, it could quickly become confusing as it would be unclear to
which component the code belongs.

The secure_partition.h header is a clear example of this, as the
name is generic so it could easily apply to any SPM-related code,
when it is in fact SPM-MM specific.

This patch renames the file and the two structures defined within
it, and then modifies any references in files that use the header.

Change-Id: I44bd95fab774c358178b3e81262a16da500fda26
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

The Secure Partition Manager (SPM) prototype implementation is
being removed. This is preparatory work for putting in place a
dispatcher component that, in turn, enables partition managers
at S-EL2 / S-EL1.

This patch removes:

- The core service files (std_svc/spm)
- The Resource Descriptor headers (include/services)
- SPRT protocol support and service definitions
- SPCI protocol support and service definitions

Change-Id: Iaade6f6422eaf9a71187b1e2a4dffd7fb8766426
Signed-off-by: Paul Beesley <paul.beesley@arm.com>
Signed-off-by: Artsem Artsemenka <artsem.artsemenka@arm.com>

There are two different implementations of Secure Partition
management in TF-A. One is based on the "Management Mode" (MM)
design, the other is based on the Secure Partition Client Interface
(SPCI) specification. Currently there is a dependency between their
build flags that shouldn't exist, making further development
harder than it should be. This patch removes that
dependency, making the two flags function independently.

Before: ENABLE_SPM=1 is required for using either implementation.
        By default, the SPCI-based implementation is enabled and
        this is overridden if SPM_MM=1.

After: ENABLE_SPM=1 enables the SPCI-based implementation.
       SPM_MM=1 enables the MM-based implementation.
       The two build flags are mutually exclusive.

Note that the name of the ENABLE_SPM flag remains a bit
ambiguous - this will be improved in a subsequent patch. For this
patch the intention was to leave the name as-is so that it is
easier to track the changes that were made.

Change-Id: I8e64ee545d811c7000f27e8dc8ebb977d670608a
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

Provide an SMC interface to the 9p filesystem. This permits
accessing firmware drivers through a common interface, using
standardized read/write/control operations.
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I9314662314bb060f6bc02714476574da158b2a7d