GitLab

Include EL2 registers related to Nested Virtualization in EL2 context
save/restore routines if architecture supports it and platform wants to
use these features in Secure world.

Change-Id: If006ab83bbc2576488686f5ffdff88b91adced5c
Signed-off-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>

And from crash_console_flush.

We ignore the error information return by console_flush in _every_
place where we call it, and casting the return type to void does not
work around the MISRA violation that this causes. Instead, we collect
the error information from the driver (to avoid changing that API), and
don't return it to the caller.

Change-Id: I1e35afe01764d5c8f0efd04f8949d333ffb688c1
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>

This patch migrates the mbedcrypto dependency for TF-A
to mbedTLS repo v2.24.0 which is the latest release tag.
The relevant documentation is updated to reflect the
use of new version.

Change-Id: I116f44242e8c98e856416ea871d11abd3234dac1
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

Builds in Debug mode with Measured Boot enabled might run out of trusted
SRAM. This patch allows to change the Log Level at which the Measured Boot
driver will dump the event log, so the latter can be accessed even on
Release builds if necessary, saving space on RAM.
Signed-off-by: Javier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: I133689e313776cb3f231b774c26cbca4760fa120

Documented the CPU specific build macros created for AT
speculative workaround.

Updated the description of 'ERRATA_SPECULATIVE_AT' errata
workaround option.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: Ie46a80d4e8183c1d5c8b153f08742a04d41a2af2

SP804 TIMER is not platform specific, and current code base adds
multiple defines to use this driver. Like FVP_USE_SP804_TIMER and
FVP_VE_USE_SP804_TIMER.

This patch removes platform specific build flag and adds generic
flag `USE_SP804_TIMER` to be set to 1 by platform if needed.

Change-Id: I5ab792c189885fd1b98ddd187f3a38ebdd0baba2
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

This patch fixes the bug when AMUv1 group1 counters was
always assumed being implemented without checking for its
presence which was causing exception otherwise.
The AMU extension code was also modified as listed below:
- Added detection of AMUv1 for ARMv8.6
- 'PLAT_AMU_GROUP1_NR_COUNTERS' build option is removed and
number of group1 counters 'AMU_GROUP1_NR_COUNTERS' is now
calculated based on 'AMU_GROUP1_COUNTERS_MASK' value
- Added bit fields definitions and access functions for
AMCFGR_EL0/AMCFGR and AMCGCR_EL0/AMCGCR registers
- Unification of amu.c Aarch64 and Aarch32 source files
- Bug fixes and TF-A coding style compliant changes.

Change-Id: I14e407be62c3026ebc674ec7045e240ccb71e1fb
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

If the user tries to change BUILD_BASE to put the build products outside
the build tree the compile will fail due to hard coded assumptions that
$BUILD_BASE is a relative path. Fix by using $(abspath $(BUILD_BASE))
to rationalize to an absolute path every time and remove the relative
path assumptions.

This patch also adds documentation that BUILD_BASE can be specified by
the user.
Signed-off-by: Grant Likely <grant.likely@arm.com>
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Ib1af874de658484aaffc672f30029b852d2489c8

These broken links were found with the help of this command:
$> sphinx-build -M linkcheck . build

A sample broken link is reported as follows:
(line   80) -local-   firmware-design.rst#secure-el1-payloads-and-dispatchers

Change-Id: I5dcefdd4b8040908658115647e957f6c2c5da7c2
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

Openssl directory path is hardcoded to '/usr' in the makefile
of certificate generation and firmware encryption tool using
'OPENSSL_DIR' variable.

Hence changes are done to make 'OPENSSL_DIR' variable as
a build option so that user can provide openssl directory
path while building the certificate generation and firmware
encryption tool.

Also, updated the document for this newly created build option

Change-Id: Ib1538370d2c59263417f5db3746d1087ee1c1339
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

Currently, 'SMCCC_ARCH_FEATURES' SMC call handler unconditionally
returns 'SMC_OK' for 'SMCCC_ARCH_SOC_ID' function. This seems to
be not correct for the platform which doesn't implement soc-id
functionality i.e. functions to retrieve both soc-version and
soc-revision.
Hence introduced a platform function which will check whether SMCCC
feature is available for the platform.

Also, updated porting guide for the newly added platform function.

Change-Id: I389f0ef6b0837bb24c712aa995b7176117bc7961
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

docker (container) is another way to build the documentation and fortunately
there is already a docker image (sphinxdoc/sphinx) with sphinx so we can use
it to generate the documentation.

Change-Id: I06b0621cd7509a8279655e828680b92241b9fde4
Signed-off-by: Leonardo Sandoval <leonardo.sandoval@linaro.org>

Added a build option 'COT_DESC_IN_DTB' to create chain of trust
at runtime using fconf.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I92b257ac4ece8bbf56f05a41d1e4056e2422ab89

There were some links in the file "ras.rst" which were broken, this
patch fixes all the broken links in this file.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I00cf080e9338af5786239a4843cb4c2e0cc9d99d

Updated the porting guide for the usage of received arguments
in BL2 and BL32 setup functions in case of Arm platform.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: Ia83a5607fed999819d25e49322b3bfb5db9425c0

This patch adds BRANCH_PROTECTION = 4 'bti' build option
which turns on branch target identification mechanism.

Change-Id: I32464a6b51726a100519f449a95aea5331f0e82d
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

This patch adds a build config 'RAS_TRAP_LOWER_EL_ERR_ACCESS' to set
SCR_EL3.TERR during CPU boot. This bit enables trapping RAS register
accesses from EL1 or EL2 to EL3.

RAS_TRAP_LOWER_EL_ERR_ACCESS is disabled by default.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: Ifb0fb0afedea7dd2a29a0b0491a1161ecd241438

Using the fconf framework, the Group 0 and Group 1 secure interrupt
descriptors are moved to device tree and retrieved in runtime. This
feature is enabled by the build flag SEC_INT_DESC_IN_FCONF.

Change-Id: I360c63a83286c7ecc2426cd1ff1b4746d61e633c
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

The only difference between GIC-500 and GIC-600 relevant to TF-A is the
differing power management sequence.
A certain GIC implementation is detectable at runtime, for instance by
checking the IIDR register. Let's add that test before initiating the
GIC-600 specific sequence, so the code can be used on both GIC-600 and
GIC-500 chips alike, without deciding on a GIC chip at compile time.

This means that the GIC-500 "driver" is now redundant. To allow minimal
platform support, add a switch to disable GIC-600 support.

Change-Id: I17ea97d9fb05874772ebaa13e6678b4ba3415557
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

Document the second argument of the function.
Minor rewording.

Change-Id: I190794b8cc74c99db4cfe6efc225217c32dd0774
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

This patch enables the v8.6 extension to add a delay before WFE traps
are taken. A weak hook plat_arm_set_twedel_scr_el3 has been added in
plat/common/aarch64/plat_common.c that disables this feature by default
but platform-specific code can override it when needed.

The only hook provided sets the TWED fields in SCR_EL3, there are similar
fields in HCR_EL2, SCTLR_EL2, and SCTLR_EL1 to control WFE trap delays in
lower ELs but these should be configured by code running at EL2 and/or EL1
depending on the platform configuration and is outside the scope of TF-A.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I0a9bb814205efeab693a3d0a0623e62144abba2d

This patch introduces dynamic configuration for SDEI setup and is supported
when the new build flag SDEI_IN_FCONF is enabled. Instead of using C arrays
and processing the configuration at compile time, the config is moved to
dts files. It will be retrieved at runtime during SDEI init, using the fconf
layer.

Change-Id: If5c35a7517ba00a9f258d7f3e7c8c20cee169a31
Signed-off-by: Balint Dobszay <balint.dobszay@arm.com>
Co-authored-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

During context switching from higher EL (EL2 or higher)
to lower EL can cause incorrect translation in TLB due to
speculative execution of AT instruction using out-of-context
translation regime.

Workaround is implemented as below during EL's (EL1 or EL2)
"context_restore" operation:
1. Disable page table walk using SCTLR.M and TCR.EPD0 & EPD1
   bits for EL1 or EL2 (stage1 and stage2 disabled)
2. Save all system registers except TCR and SCTLR (for EL1 and EL2)
3. Do memory barrier operation (isb) to ensure all
   system register writes are done.
4. Restore TCR and SCTLR registers (for EL1 and EL2)

Errata details are available for various CPUs as below:
Cortex-A76: 1165522
Cortex-A72: 1319367
Cortex-A57: 1319537
Cortex-A55: 1530923
Cortex-A53: 1530924

More details can be found in mail-chain:
https://lists.trustedfirmware.org/pipermail/tf-a/2020-April/000445.html



Currently, Workaround is implemented as build option which is default
disabled.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: If8545e61f782cb0c2dda7ffbaf50681c825bd2f0

Following the messages on the mailing list regarding the possible issue around
reading DTB's information, we decided to flag the fconf feature as experimental.
A uniform approach should be used to handle properties miss and DTB validation.
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
Change-Id: Ib3c86e81fb2e89452c593f68d825d3d8f505e1fb

Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Change-Id: Ie842d6a9919776de151a4e9304f870aede07c47a

This patch adds support for GICv4 extension.
New `GIC_ENABLE_V4_EXTN` option passed to gicv3.mk makefile
was added, and enables GICv4 related changes when set to 1.
This option defaults to 0.

Change-Id: I30ebe1b7a98d3a54863900f37eda4589c707a288
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

This patch provides support for GICv3.1 extended PPI and SPI
range. The option is enabled by setting to 1 and passing
`GIC_EXT_INTID` build flag to gicv3.mk makefile.
This option defaults to 0 with no extended range support.

Change-Id: I7d09086fe22ea531c5df51a8a1efd8928458d394
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

Enable MTE support by adding memory tag option in Makefile
This option is available only when ARMv8.5-MemTag is implemented

MTE options are added in latest clang and armclang compiler which
support below options:
for clang <version 11.0.0>
1. -march=arm8.5-a+memtag
2. -fsanitize=memtag

for armclang <version 6.12>
1. -march=arm8.5-a+memtag
2. -mmemtag-stack

Set the option SUPPORT_STACK_MEMTAG=yes to enable memory stack tagging.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I4e0bbde4e9769ce03ead6f550158e22f32c1c413

This patch moves all GICv3 driver files into new added
'gicv3.mk' makefile for the benefit of the generic driver
which can evolve in the future without affecting platforms.
The patch adds GICv3 driver configuration flags
'GICV3_IMPL', 'GICV3_IMPL_GIC600_MULTICHIP' and
'GICV3_OVERRIDE_DISTIF_PWR_OPS' described in
'GICv3 driver options' section of 'build-option.rst'
document.

NOTE: Platforms with GICv3 driver need to be modified to
include 'drivers/arm/gic/v3/gicv3.mk' in their makefiles.

Change-Id: If055f6770ff20f5dee5a3c99ae7ced7cdcac5c44
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I93892dbe76611a7a4b852af3272a0e6271ae037b

Fix below warnings appeared in porting-guide.rst
WARNING: Title underline too short.

Change-Id: Ibc0eba0da72a53a5f9b61c49a8bf7a10b17bc3b8
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

Implemented SMCCC_ARCH_SOC_ID call in order to get below
SOC information:

1. SOC revision
2. SOC version

Implementation done using below SMCCC specification document:
https://developer.arm.com/docs/den0028/c

Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: Ie0595f1c345a6429a6fb4a7f05534a0ca9c9a48b

Merge the previously introduced arm_fconf_io_storage into arm_io_storage. This
removes the duplicate io_policies and functions definition.

This patch:
- replace arm_io_storage.c with the content of arm_fconf_io_storage.c
- rename the USE_FCONF_BASED_IO option into ARM_IO_IN_DTB.
- use the ARM_IO_IN_DTB option to compile out io_policies moved in dtb.
- propagate DEFINES when parsing dts.
- use ARM_IO_IN_DTB to include or not uuid nodes in fw_config dtb.
- set the ARM_IO_IN_DTB to 0 by default for fvp. This ensure that the behavior
  of fvp stays the same as it was before the introduction of fconf.

Change-Id: Ia774a96d1d3a2bccad29f7ce2e2b4c21b26c080e
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>

Update documentation with optional firmware encryption feature.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Change-Id: I26691b18e1ee52a73090954260f26f2865c4e05a

Include x509.h header file explicitly. Update docs.

Change-Id: If2e52c2cd3056654406b7b6779b67eea5cc04a48
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

Add framework for autheticated decryption of data. Currently this
patch optionally imports mbedtls library as a backend if build option
"DECRYPTION_SUPPORT = aes_gcm" is set to perform authenticated decryption
using AES-GCM algorithm.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Change-Id: I2966f0e79033151012bf4ffc66f484cd949e7271

Till now TF-A allows limited number of external images to be made part
of FIP. With SPM coming along, there may exist multiple SP packages
which need to be inserted into FIP. To achieve this we need a more
scalable approach to feed SP packages to FIP.

This patch introduces changes in build system to generate and add SP
packages into FIP based on information provided by platform.
Platform provides information in form of JSON which contains layout
description of available Secure Partitions.
JSON parser script is invoked by build system early on and generates
a makefile which updates FIP, SPTOOL and FDT arguments which will be
used by build system later on for final packaging.

"SP_LAYOUT_FILE" passed as a build argument and can be outside of TF-A
tree. This option will be used only when SPD=spmd.

For each SP, generated makefile will have following entries
     - FDT_SOURCES	+=	sp1.dts
     - SPTOOL_ARGS	+= 	-i sp1.img:sp1.dtb -o sp1.pkg
     - FIP_ARGS		+=	--blob uuid=XXXX-XXX...,file=SP1.pkg
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Ib6a9c064400caa3cd825d9886008a3af67741af7

This patch:
- Add the __COHERENT_RAM_START__ and __COHERENT_RAM_END__ symbols.
- Improve how the symbols are found with a regex.
- Add a build option to revert the memory layout output.

Change-Id: I54ec660261431bc98d78acb0f80e3d95bc5397ac
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>

At the moment, address demangling is only used by the backtrace
functionality. However, at some point, other parts of the TF-A
codebase may want to use it.
The 'demangle_address' function is replaced with a single XPACI
instruction which is also added in 'do_crash_reporting()'.
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Change-Id: I4424dcd54d5bf0a5f9b2a0a84c4e565eec7329ec

Use the firmware configuration framework to store the io_policies
information inside the configuration device tree instead of the static
structure in the code base.

The io_policies required by BL1 can't be inside the dtb, as this one is
loaded by BL1, and only available at BL2.

This change currently only applies to FVP platform.

Change-Id: Ic9c1ac3931a4a136aa36f7f58f66d3764c1bfca1
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>