Skip to content

GitLab

Switch branch/tag
  1. 15 Aug, 2018 1 commit
  3. 02 Aug, 2018 1 commit
  5. 30 Jul, 2018 1 commit
  7. 26 Jul, 2018 1 commit
  9. 24 Jul, 2018 6 commits
  11. 19 Jul, 2018 1 commit
    • Roberto Vargas's avatar
      cci: Wait before reading status register · ae551a13
      Roberto Vargas authored 
      

The functions cci_enable_snoop_dvm_reqs and cci_disable_snoop_dvm_reqs write
in the SNOOP_CTRL_REGISTER of the slave interface and it polls the status
register to be sure that the operation is finished before leaving the
functions. If the write in SNOOP_CTRL_REGISTER is reordered after the first
read in the status register then these functions can finish before
enabling/disabling snoops and DVM messages.

The CCI500 TRM specifies:

	Wait for the completion of the write to the Snoop Control Register
	before testing the change_pending bit.

Change-Id: Idc7685963f412be1c16bcd3c6e3cca826e2fdf38
Signed-off-by: default avatarRoberto Vargas <roberto.vargas@arm.com>
      ae551a13
  13. 18 Jul, 2018 7 commits
  15. 03 Jul, 2018 1 commit
    • Yann Gautier's avatar
      Add MMC framework · ad71d45e
      Yann Gautier authored 
      

This change is largely based on existing eMMC framework by Haojian Zhuang
(@hzhuang1).

The MMC framework supports both eMMC and SD card devices. It was
written as a new framework since breaking few eMMC framework APIs.

At card probe and after the reset to idle command (CMD0), a Send
Interface Condition Command is sent (CMD8) to distinguish between
eMMC and SD card devices. eMMC devices go through the same
sequence as in the former eMMC framework. Else the framework
uses commands dedicated to SD-cards for init or frequency switch.

A structure is created to share info with the driver. It stores:
- the MMC type (eMMC, SD or SD HC)
- the device size
- the max frequency supported by the device
- the block size: 512 for eMMC and SD-HC and read from CSD
 structure for older SD-cards

Restriction to align buffers on block size has been removed.
Cache maintenance was removed and is expected to be done in the platform
or device driver.

The MMC framework includes some MISRA compliance coding style
maybe not yet ported in the existing eMMC framework.

Fixes ARM-software/tf-issues#597
Signed-off-by: default avatarYann Gautier <yann.gautier@st.com>
      ad71d45e
  17. 02 Jul, 2018 1 commit
  19. 18 Jun, 2018 1 commit
  21. 14 Jun, 2018 1 commit
    • Roberto Vargas's avatar
      Make TF UUID RFC 4122 compliant · 03364865
      Roberto Vargas authored 
      

RFC4122 defines that fields are stored in network order (big endian),
but TF-A stores them in machine order (little endian by default in TF-A).
We cannot change the future UUIDs that are already generated, but we can store
all the bytes using arrays and modify fiptool to generate the UUIDs with
the correct byte order.

Change-Id: I97be2d3168d91f4dee7ccfafc533ea55ff33e46f
Signed-off-by: default avatarRoberto Vargas <roberto.vargas@arm.com>
      03364865
  23. 12 Jun, 2018 2 commits
    • Daniel Boulby's avatar
      Fix MISRA Rule 5.3 Part 2 · 896a5902
      Daniel Boulby authored 
      

Use a _ prefix for Macro arguments to prevent that argument from
hiding variables of the same name in the outer scope

Rule 5.3: An identifier declared in an inner scope shall not
          hide an identifier declared in an outer scope

Fixed For:
    make LOG_LEVEL=50 PLAT=fvp

Change-Id: I67b6b05cbad4aeca65ce52981b4679b340604708
Signed-off-by: default avatarDaniel Boulby <daniel.boulby@arm.com>
      896a5902
    • Daniel Boulby's avatar
      Fix MISRA Rule 5.1 · 87d3aacc
      Daniel Boulby authored 
      

Rule 5.1: External identifiers shall be distinct

Some of the identifier names in the GICv3 driver were so long that the
first 31 characters were identical. This patch shortens these names to
make sure they are different.

Fixed for:
    LOG_LEVEL=50 PLAT=fvp

Change-Id: Iecd551e3a015d144716b87b42c83dd3ab8c34d90
Signed-off-by: default avatarDaniel Boulby <daniel.boulby@arm.com>
      87d3aacc
  25. 11 Jun, 2018 1 commit
  27. 18 May, 2018 1 commit
  29. 17 May, 2018 1 commit
    • Daniel Boulby's avatar
      Ensure read and write of flags are 32 bit · 8abcdf92
      Daniel Boulby authored 
      

In 'console_set_scope' and when registering a console, field 'flags' of
'console_t' is assigned a 32-bit value. However, when it is actually
used, the functions perform 64-bit reads to access its value. This patch
changes all 64-bit reads to 32-bit reads.

Change-Id: I181349371409e60065335f078857946fa3c32dc1
Signed-off-by: default avatarDaniel Boulby <daniel.boulby@arm.com>
      8abcdf92
  31. 11 May, 2018 1 commit
    • Antonio Nino Diaz's avatar
      multi console: Assert that consoles aren't registered twice · c2e05bb7
      Antonio Nino Diaz authored 
      

In the multi console driver, allowing to register the same console more
than once may result in an infinte loop when putc is called.

If, for example, a boot message is trying to be printed, but the
consoles in the loop in the linked list are runtime consoles, putc will
iterate forever looking for a console that can print boot messages (or
a NULL pointer that will never come).

This loop in the linked list can occur after restoring the system from a
system suspend. The boot console is registered during the cold boot in
BL31, but the runtime console is registered even in the warm boot path.
Consoles are always added to the start of the linked list when they are
registered, so this it what should happen if they were actually
different structures:

   console_list -> NULL
   console_list -> BOOT -> NULL
   console_list -> RUNTIME -> BOOT -> NULL
   console_list -> RUNTIME -> RUNTIME -> BOOT -> NULL

In practice, the two runtime consoles are the same one, so they create
this loop:

   console_list -> RUNTIME -.    X -> BOOT -> NULL
                       ^    |
                       `----'

This patch adds an assertion to detect this problem. The assertion will
fail whenever the same structure tries to be registered while being on
the list.

In order to assert this, console_is_registered() has been implemented.
It returns 1 if the specified console is registered, 0 if not.

Change-Id: I922485e743775ca9bd1af9cbd491ddd360526a6d
Signed-off-by: default avatarAntonio Nino Diaz <antonio.ninodiaz@arm.com>
      c2e05bb7
  33. 27 Apr, 2018 1 commit
  35. 13 Apr, 2018 2 commits
    • Roberto Vargas's avatar
      Fix MISRA rule 8.4 Part 4 · 3b94189a
      Roberto Vargas authored 
      

Rule 8.4: A compatible declaration shall be visible when
          an object or function with external linkage is defined

Fixed for:
	make DEBUG=1 PLAT=fvp SPD=tspd TRUSTED_BOARD_BOOT=1 \
	     GENERATE_COT=1 ARM_ROTPK_LOCATION=devel_rsa \
	     ROT_KEY=arm_rotprivk_rsa.pem MBEDTLS_DIR=mbedtls all

Change-Id: Ie4cd6011b3e4fdcdd94ccb97a7e941f3b5b7aeb8
Signed-off-by: default avatarRoberto Vargas <roberto.vargas@arm.com>
      3b94189a
    • Roberto Vargas's avatar
      Fix MISRA rule 8.3 Part 4 · 735181b6
      Roberto Vargas authored 
      

Rule 8.3: All declarations of an object or function shall
          use the same names and type qualifiers

Fixed for:
	make DEBUG=1 PLAT=fvp SPD=tspd TRUSTED_BOARD_BOOT=1 \
	     GENERATE_COT=1 ARM_ROTPK_LOCATION=devel_rsa \
	     ROT_KEY=arm_rotprivk_rsa.pem MBEDTLS_DIR=mbedtls all

Change-Id: Ia34fe1ae1f142e89c9a6c19831e3daf4d28f5831
Signed-off-by: default avatarRoberto Vargas <roberto.vargas@arm.com>
      735181b6
  37. 09 Apr, 2018 1 commit
  39. 03 Apr, 2018 2 commits
    • Andre Przywara's avatar
      gicv3: Fix support for systems without secure interrupts · 205cf6e7
      Andre Przywara authored 
      

Accessing the interrupt_props array only happens inside a loop over
interrupt_props_num, so the GICv3 driver can cope with no secure
interrupts. This allows us to relax the asserts that insists on
a non-NULL interrupt_props pointer and at least one secure interrupt.
This enables GICv3 platforms which have no need for a secure interrupt.

This only covers the non-deprecated code paths.

Change-Id: I49db291906512f56af065772f69acb281dfbdcfb
Signed-off-by: default avatarAndre Przywara <andre.przywara@arm.com>
      205cf6e7
    • Samuel Holland's avatar
      gicv2: Fix support for systems without secure interrupts · 9d6d800d
      Samuel Holland authored 
      

Accessing the interrupt_props array only happens inside a loop over
interrupt_props_num, so the GICv2 driver can cope with no secure
interrupts. As in fact we have already some asserts in place that
respect that, lets change the final place where we insist on a non-NULL
pointer to relax that.
This enables GICv2 platforms which have no need for a secure interrupt.

This only covers the non-deprecated code paths.

Also we remove a now redundant assert().

Change-Id: Id100ea978643d8558335ad28649d55743fe9bd4c
Signed-off-by: default avatarSamuel Holland <samuel@sholland.org>
Signed-off-by: default avatarAndre Przywara <andre.przywara@arm.com>
      9d6d800d
  41. 27 Mar, 2018 1 commit
    • Joel Hutton's avatar
      Clean usage of void pointers to access symbols · 9f85f9e3
      Joel Hutton authored 
      

Void pointers have been used to access linker symbols, by declaring an
extern pointer, then taking the address of it. This limits symbols
values to aligned pointer values. To remove this restriction an
IMPORT_SYM macro has been introduced, which declares it as a char
pointer and casts it to the required type.

Change-Id: I89877fc3b13ed311817bb8ba79d4872b89bfd3b0
Signed-off-by: default avatarJoel Hutton <Joel.Hutton@Arm.com>
      9f85f9e3
  43. 26 Mar, 2018 2 commits
  45. 22 Mar, 2018 1 commit
  47. 05 Mar, 2018 1 commit
  49. 01 Mar, 2018 1 commit
    • Dan Handley's avatar
      Emit warnings when using deprecated GIC init · dcf01a0a
      Dan Handley authored 
      

Emit runtime warnings when intializing the GIC drivers using the
deprecated method of defining integer interrupt arrays in the GIC driver
data structures; interrupt_prop_t arrays should be used instead. This
helps platforms detect that they have migration work to do. Previously,
no warning was emitted in this case. This affects both the GICv2 and GICv3
drivers.

Also use the __deprecated attribute to emit a build time warning if these
deprecated fields are used. These warnings are suppressed in the GIC
driver compatibility functions but will be visible if platforms use them.

Change-Id: I6b6b8f6c3b4920c448b6dcb82fc18442cfdf6c7a
Signed-off-by: default avatarDan Handley <dan.handley@arm.com>
      dcf01a0a