GitLab

Add blank lines before lists and code example.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I901646e0be74227af983079d0cbe05c6a217fab6

After introducing the new STM32MP1 SoC versions in patch [1], the
document describing STM32MP1 platform is updated with the information
given in the patch commit message.

 [1]: stm32mp1: add support for new SoC profiles

Change-Id: I6d7ce1a3c29678ddac78a6685f5d5daf28c3c3a1
Signed-off-by: Yann Gautier <yann.gautier@st.com>

stm32mp15_optee_defconfig has been dropped from U-Boot as it became
identical to stm32mp15_trusted_defconfig.

Furthermore give a hint how OP-TEE is supposed to be installed.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Change-Id: Id8f0bd84a87e3a62072dd4405aadddcdd3511213

Add new flags for storage support that must be used in the build
command line. Add the complete build steps for an OP-TEE configuration.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: I0c682f6eb0aab83aa929f4ba734d3151c264aeed

U-Boot should be compiled with stm32mp15_trusted_defconfig which is
supported since tag v2019.07-rc1 with commit [1].

The creation of the U-Boot binary with stm32 header is done at U-Boot
compilation step, it is no more required to call the extra command.

[1] https://git.denx.de/?p=u-boot.git;a=commit;h=015289580f81



Change-Id: Ia875c22184785fc2e02ad07993a649069cd5ce34
Signed-off-by: Yann Gautier <yann.gautier@st.com>

The platform port documents are not very standardised right now and
they don't integrate properly into the document tree so:

1) Make sure each port has a proper name and title (incl. owner)
2) Correct use of headings, subheadings, etc in each port
3) Resolve any naming conflicts between documents

Change-Id: I4c2da6f57172b7f2af3512e766ae9ce3b840b50f
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

Since STM32MP1 platform supports different boards, it is necessary
to build for a particular board. With the current instructions, the
user has to modify the DTB_FILE_NAME variable in platform.mk for
building for a particular board, but this can be avoided by passing
the appropriate board DTB name via DTB_FILE_NAME make variable.
Hence document the same in platform doc.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Change-Id: I16797e7256c7eb699a7b8846356fe430d0fe0aa1

Support booting OP-TEE as BL32 boot stage and secure runtime
service.

OP-TEE executes in internal RAM and uses a secure DDR area to store
the pager pagestore. Memory mapping and TZC are configured accordingly
prior OP-TEE boot. OP-TEE image is expected in OP-TEE v2 format where
a header file describes the effective boot images. This change
post processes header file content to get OP-TEE load addresses
and set OP-TEE boot arguments.

Change-Id: I02ef8b915e4be3e95b27029357d799d70e01cd44
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>

A link to st.com page describing STM32MP1 is added.
Add the information about Cortex-M4 embedded in STM32MP1.
Correct typo for u-boot command.

Change-Id: Ie900f6ee59461c5e7ad8a8b06854abaf41fca3ce
Signed-off-by: Yann Gautier <yann.gautier@st.com>

Add U-Boot compilation information.
Add a chapter about how to populate SD-card.
Signed-off-by: Yann Gautier <yann.gautier@st.com>

Signed-off-by: Yann Gautier <yann.gautier@st.com>