Skip to content

GitLab

Switch branch/tag
  1. 01 Feb, 2019 1 commit
  3. 30 Jan, 2019 1 commit
  5. 23 Jan, 2019 1 commit
    • Sathees Balya's avatar
      plat/arm: Save BL2 descriptors to reserved memory. · 5b8d50e4
      Sathees Balya authored 
      

On ARM platforms, the BL2 memory can be overlaid by BL31/BL32. The memory
descriptors describing the list of executable images are created in BL2
R/W memory, which could be possibly corrupted later on by BL31/BL32 due
to overlay. This patch creates a reserved location in SRAM for these
descriptors and are copied over by BL2 before handing over to next BL
image.

Also this patch increases the PLAT_ARM_MAX_BL2_SIZE for juno when TBBR
is enabled.

Fixes ARM-Software/tf-issues#626

Change-Id: I755735706fa702024b4032f51ed4895b3687377f
Signed-off-by: default avatarSathees Balya <sathees.balya@arm.com>
      5b8d50e4
  7. 15 Jan, 2019 1 commit
  9. 04 Jan, 2019 2 commits
    • Antonio Nino Diaz's avatar
      Sanitise includes across codebase · 09d40e0e
      Antonio Nino Diaz authored 
      Enforce full include path for includes. Deprecate old paths.

The following folders inside include/lib have been left unchanged:

- include/lib/cpus/${ARCH}
- include/lib/el3_runtime/${ARCH}

The reason for this change is that having a global namespace for
includes isn't a good idea. It defeats one of the advantages of having
folders and it introduces problems that are sometimes subtle (because
you may not know the header you are actually including if there are two
of them).

For example, this patch had to be created because two headers were
called the same way: e0ea0928 ("Fix gpio includes of mt8173 platform
to avoid collision."). More recently, this patch has had similar
problems: 46f9b2c3 ("drivers: add tzc380 support").

This problem was introduced in commit 4ecca339

 ("Move include and
source files to logical locations"). At that time, there weren't too
many headers so it wasn't a real issue. However, time has shown that
this creates problems.

Platforms that want to preserve the way they include headers may add the
removed paths to PLAT_INCLUDES, but this is discouraged.

Change-Id: I39dc53ed98f9e297a5966e723d1936d6ccf2fc8f
Signed-off-by: default avatarAntonio Nino Diaz <antonio.ninodiaz@arm.com>
      09d40e0e
    • Antonio Nino Diaz's avatar
      Reorganize architecture-dependent header files · f5478ded
      Antonio Nino Diaz authored 
      

The architecture dependant header files in include/lib/${ARCH} and
include/common/${ARCH} have been moved to /include/arch/${ARCH}.

Change-Id: I96f30fdb80b191a51448ddf11b1d4a0624c03394
Signed-off-by: default avatarAntonio Nino Diaz <antonio.ninodiaz@arm.com>
      f5478ded
  11. 03 Jan, 2019 1 commit
  13. 10 Dec, 2018 1 commit
    • Jeenu Viswambharan's avatar
      AArch64: Use SSBS for CVE_2018_3639 mitigation · 48e1d350
      Jeenu Viswambharan authored 
      

The Armv8.5 extensions introduces PSTATE.SSBS (Speculation Store Bypass
Safe) bit to mitigate against Variant 4 vulnerabilities. Although an
Armv8.5 feature, this can be implemented by CPUs implementing earlier
version of the architecture.

With this patch, when both PSTATE.SSBS is implemented and
DYNAMIC_WORKAROUND_CVE_2018_3639 is active, querying for
SMCCC_ARCH_WORKAROUND_2 via. SMCCC_ARCH_FEATURES call would return 1 to
indicate that mitigation on the PE is either permanently enabled or not
required.

When SSBS is implemented, SCTLR_EL3.DSSBS is initialized to 0 at reset
of every BL stage. This means that EL3 always executes with mitigation
applied.

For Cortex A76, if the PE implements SSBS, the existing mitigation (by
using a different vector table, and tweaking CPU ACTLR2) is not used.

Change-Id: Ib0386c5714184144d4747951751c2fc6ba4242b6
Signed-off-by: default avatarJeenu Viswambharan <jeenu.viswambharan@arm.com>
      48e1d350
  15. 08 Nov, 2018 1 commit
    • Antonio Nino Diaz's avatar
      Standardise header guards across codebase · c3cf06f1
      Antonio Nino Diaz authored 
      

All identifiers, regardless of use, that start with two underscores are
reserved. This means they can't be used in header guards.

The style that this project is now to use the full name of the file in
capital letters followed by 'H'. For example, for a file called
"uart_example.h", the header guard is UART_EXAMPLE_H.

The exceptions are files that are imported from other projects:

- CryptoCell driver
- dt-bindings folders
- zlib headers

Change-Id: I50561bf6c88b491ec440d0c8385c74650f3c106e
Signed-off-by: default avatarAntonio Nino Diaz <antonio.ninodiaz@arm.com>
      c3cf06f1
  17. 02 Nov, 2018 2 commits
  19. 01 Nov, 2018 1 commit
  21. 29 Oct, 2018 2 commits
    • Soby Mathew's avatar
      PIE: Position Independant Executable support for BL31 · 931f7c61
      Soby Mathew authored 
      

This patch introduces Position Independant Executable(PIE) support
in TF-A. As a initial prototype, only BL31 can support PIE. A trivial
dynamic linker is implemented which supports fixing up Global Offset
Table(GOT) and Dynamic relocations(.rela.dyn). The fixup_gdt_reloc()
helper function implements this linker and this needs to be called
early in the boot sequence prior to invoking C functions. The GOT is
placed in the RO section of BL31 binary for improved security and the
BL31 linker script is modified to export the appropriate symbols
required for the dynamic linker.

The C compiler always generates PC relative addresses to linker symbols
and hence referencing symbols exporting constants are a problem when
relocating the binary. Hence the reference to the
`__PERCPU_TIMESTAMP_SIZE__` symbol in PMF is removed and is now calculated
at runtime based on start and end addresses.

Change-Id: I1228583ff92cf432963b7cef052e95d995cca93d
Signed-off-by: default avatarSoby Mathew <soby.mathew@arm.com>
      931f7c61
    • Soby Mathew's avatar
      PIE: Use PC relative adrp/adr for symbol reference · f1722b69
      Soby Mathew authored 
      

This patch fixes up the AArch64 assembly code to use
adrp/adr instructions instead of ldr instruction for
reference to symbols. This allows these assembly
sequences to be Position Independant. Note that the
the reference to sizes have been replaced with
calculation of size at runtime. This is because size
is a constant value and does not depend on execution
address and using PC relative instructions for loading
them makes them relative to execution address. Also
we cannot use `ldr` instruction to load size as it
generates a dynamic relocation entry which must *not*
be fixed up and it is difficult for a dynamic loader
to differentiate which entries need to be skipped.

Change-Id: I8bf4ed5c58a9703629e5498a27624500ef40a836
Signed-off-by: default avatarSoby Mathew <soby.mathew@arm.com>
      f1722b69
  23. 26 Oct, 2018 1 commit
  25. 19 Oct, 2018 1 commit
    • Soby Mathew's avatar
      Multi-console: Deprecate the `finish_console_register` macro · cc5859ca
      Soby Mathew authored 
      

The `finish_console_register` macro is used by the multi console
framework to register the `console_t` driver callbacks. It relied
on weak references to the `ldr` instruction to populate 0 to the
callback in case the driver has not defined the appropriate
function. Use of `ldr` instruction to load absolute address to a
reference makes the binary position dependant. These instructions
should be replaced with adrp/adr instruction for position independant
executable(PIE). But adrp/adr instructions don't work well with weak
references as described in GNU ld bugzilla issue 22589.

This patch defines a new version of `finish_console_register` macro
which can spcify which driver callbacks are valid and deprecates the
old one. If any of the argument is not specified, then the macro
populates 0 for that callback. Hence the functionality of the previous
deprecated macro is preserved. The USE_FINISH_CONSOLE_REG_2 define
is used to select the new variant of the macro and will be removed
once the deprecated variant is removed.

All the upstream console drivers have been migrated to use the new
macro in this patch.

NOTE: Platforms be aware that the new variant of the
`finish_console_register` should be used and the old variant is
deprecated.

Change-Id: Ia6a67aaf2aa3ba93932992d683587bbd0ad25259
Signed-off-by: default avatarSoby Mathew <soby.mathew@arm.com>
      cc5859ca
  27. 16 Oct, 2018 1 commit
    • Jeenu Viswambharan's avatar
      AArch64: Enable lower ELs to use pointer authentication · 3ff4aaac
      Jeenu Viswambharan authored 
      

Pointer authentication is an Armv8.3 feature that introduces
instructions that can be used to authenticate and verify pointers.

Pointer authentication instructions are allowed to be accessed from all
ELs but only when EL3 explicitly allows for it; otherwise, their usage
will trap to EL3. Since EL3 doesn't have trap handling in place, this
patch unconditionally disables all related traps to EL3 to avoid
potential misconfiguration leading to an unhandled EL3 exception.

Fixes ARM-software/tf-issues#629

Change-Id: I9bd2efe0dc714196f503713b721ffbf05672c14d
Signed-off-by: default avatarJeenu Viswambharan <jeenu.viswambharan@arm.com>
      3ff4aaac
  29. 15 Oct, 2018 1 commit
  31. 11 Oct, 2018 1 commit
  33. 10 Oct, 2018 1 commit
  35. 09 Oct, 2018 1 commit
  37. 04 Oct, 2018 1 commit
  39. 28 Sep, 2018 3 commits
  41. 21 Sep, 2018 1 commit
  43. 30 Aug, 2018 4 commits
  45. 22 Aug, 2018 3 commits
  47. 20 Aug, 2018 1 commit
  49. 03 Aug, 2018 1 commit
    • Roberto Vargas's avatar
      Add support for romlib in the build system · 5accce5b
      Roberto Vargas authored 
      

Romlib is a new image that is stored in ROM and contains the code of
several libraries that can be shared between different images. All
the functions within in the library are accessed using a jump table
which allows to update the romlib image whithout changing the binary
compatibility. This jump table can be also stored in RAM and it can
allow to patch a romlib with potential bugs fixes..

Change-Id: If980ccdaca24b7aaca900e32acc68baf6f94ab35
Signed-off-by: default avatarRoberto Vargas <roberto.vargas@arm.com>
      5accce5b
  51. 13 Jul, 2018 1 commit
    • Sandrine Bailleux's avatar
      Run compiler on debug macros for type checking · cf24229e
      Sandrine Bailleux authored 
      

Even if the log output is too low for a message to be printed out on
the console by the debug macros, it should still be evaluated by the
compiler to get some type checking and validation of the format
specifiers. To do so, introduce the no_tf_log() macro that encloses
the call to tf_log() in an always-false condition.

This avoids the problem of discovering build issues only when we build
the firmware with the right LOG_LEVEL value.

Change-Id: Ic0fd252ab691d0187fd925756a4837aca1cbfd7b
Signed-off-by: default avatarSandrine Bailleux <sandrine.bailleux@arm.com>
      cf24229e
  53. 11 Jul, 2018 2 commits
    • Roberto Vargas's avatar
      Add end_vector_entry assembler macro · a9203eda
      Roberto Vargas authored 
      

Check_vector_size checks if the size of the vector fits
in the size reserved for it. This check creates problems in
the Clang assembler. A new macro, end_vector_entry, is added
and check_vector_size is deprecated.

This new macro fills the current exception vector until the next
exception vector. If the size of the current vector is bigger
than 32 instructions then it gives an error.

Change-Id: Ie8545cf1003a1e31656a1018dd6b4c28a4eaf671
Signed-off-by: default avatarRoberto Vargas <roberto.vargas@arm.com>
      a9203eda
    • Roberto Vargas's avatar
      Remove .func and .endfunc assembler directives · b2805dab
      Roberto Vargas authored 
      

These directives are only used when stabs debugging information
is used, but we use ELF which uses DWARF debugging information.
Clang assembler doesn't support these directives, and removing
them makes the code more compatible with clang.

Change-Id: I2803f22ebd24c0fe248e04ef1b17de9cec5f89c4
Signed-off-by: default avatarRoberto Vargas <roberto.vargas@arm.com>
      b2805dab
  55. 27 Jun, 2018 1 commit
    • Jeenu Viswambharan's avatar
      xlat v2: Split MMU setup and enable · 0cc7aa89
      Jeenu Viswambharan authored 
      

At present, the function provided by the translation library to enable
MMU constructs appropriate values for translation library, and programs
them to the right registers. The construction of initial values,
however, is only required once as both the primary and secondaries
program the same values.

Additionally, the MMU-enabling function is written in C, which means
there's an active stack at the time of enabling MMU. On some systems,
like Arm DynamIQ, having active stack while enabling MMU during warm
boot might lead to coherency problems.

This patch addresses both the above problems by:

  - Splitting the MMU-enabling function into two: one that sets up
    values to be programmed into the registers, and another one that
    takes the pre-computed values and writes to the appropriate
    registers. With this, the primary effectively calls both functions
    to have the MMU enabled, but secondaries only need to call the
    latter.

  - Rewriting the function that enables MMU in assembly so that it
    doesn't use stack.

This patch fixes a bunch of MISRA issues on the way.

Change-Id: I0faca97263a970ffe765f0e731a1417e43fbfc45
Signed-off-by: default avatarJeenu Viswambharan <jeenu.viswambharan@arm.com>
      0cc7aa89
  57. 26 Jun, 2018 1 commit