- 08 Oct, 2019 1 commit
-
-
Paul Beesley authored
Currently links between documents are using the format: <path/to/><filename>.rst This was required for services like GitHub because they render each document in isolation - linking to another document is like linking to any other file, just provide the full path. However, with the new approach, the .rst files are only the raw source for the documents. Once the documents have been rendered the output is now in another format (HTML in our case) and so, when linking to another document, the link must point to the rendered version and not the .rst file. The RST spec provides a few methods for linking between content. The parent of this patch enabled the automatic creation of anchors for document titles - we will use these anchors as the targets for our links. Additional anchors can be added by hand if needed, on section and sub-section titles, for example. An example of this new format, for a document with the title "Firmware Design" is :ref:`Firmware Design`. One big advantage of this is that anchors are not dependent on paths. We can then move documents around, even between directories, without breaking any links between documents. Links will need to be updated only if the title of a document changes. Change-Id: I9e2340a61dd424cbd8fd1ecc2dc166f460d81703 Signed-off-by: Paul Beesley <paul.beesley@arm.com>
-
- 22 May, 2019 2 commits
-
-
Paul Beesley authored
These are no longer needed as there will always be a table of contents rendered to the left of every page. Some of these lists can be quite long and, when opening a page, the reader sees nothing but a huge list of contents! After this patch, the document contents are front-and-centre and the contents are nicely rendered in the sidebar without duplication. Change-Id: I444754d548ec91d00f2b04e861de8dde8856aa62 Signed-off-by: Paul Beesley <paul.beesley@arm.com>
-
Paul Beesley authored
This patch attempts to standardise the document titles as well as adding titles to documents that were missing one. The aim is to remove needless references to "TF-A" or "Trusted Firmware" in the title of every document and to make sure that the title matches with the document content. Change-Id: I9b93ccf43b5d57e8dc793a5311b8ed7c4dd245cc Signed-off-by: Paul Beesley <paul.beesley@arm.com>
-
- 21 May, 2019 1 commit
-
-
Paul Beesley authored
This change creates the following directories under docs/ in order to provide a grouping for the content: - components - design - getting_started - perf - process In each of these directories an index.rst file is created and this serves as an index / landing page for each of the groups when the pages are compiled. Proper layout of the top-level table of contents relies on this directory/index structure. Without this patch it is possible to build the documents correctly with Sphinx but the output looks messy because there is no overall hierarchy. Change-Id: I3c9f4443ec98571a56a6edf775f2c8d74d7f429f Signed-off-by: Paul Beesley <paul.beesley@arm.com>
-
- 28 Feb, 2019 1 commit
-
-
Antonio Nino Diaz authored
Fix some typos and clarify some sentences. Change-Id: Id276d1ced9a991b4eddc5c47ad9a825e6b29ef74 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
- 15 Mar, 2018 1 commit
-
-
Dan Handley authored
Update Arm Trusted Firmware references in the upstream documents to Trusted Firmware-A (TF-A). This is for consistency with and disambiguation from Trusted Firmware-M (TF-M). Also update other Arm trademarks, e.g. ARM->Arm, ARMv8->Armv8-A. Change-Id: I8bb0e18af29c6744eeea2dc6c08f2c10b20ede22 Signed-off-by: Dan Handley <dan.handley@arm.com> Signed-off-by: David Cunado <david.cunado@arm.com>
-
- 13 Nov, 2017 1 commit
-
-
Jeenu Viswambharan authored
Acknowledging interrupt shall return a raw value from the interrupt controller in which the actual interrupt ID may be encoded. Add a platform API to extract the actual interrupt ID from the raw value obtained from interrupt controller. Document the new function. Also clarify the semantics of interrupt acknowledge. Change-Id: I818dad7be47661658b16f9807877d259eb127405 Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
-
- 16 Oct, 2017 10 commits
-
-
Jeenu Viswambharan authored
API documentation updated. Change-Id: I40feec1fe67a960d035061b54dd55610bc34ce1d Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
-
Jeenu Viswambharan authored
API documentation updated. Change-Id: I14e33cfc7dfa93257c82d76fae186b17a1b6d266 Co-authored-by: Yousuf A <yousuf.sait@arm.com> Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
-
Jeenu Viswambharan authored
SPIs can be routed to either a specific PE, or to any one of all available PEs. API documentation updated. Change-Id: I28675f634568aaf4ea1aa8aa7ebf25b419a963ed Co-authored-by: Yousuf A <yousuf.sait@arm.com> Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
-
Jeenu Viswambharan authored
API documentation updated. Change-Id: I129725059299af6cc612bafa8d74817f779d7c4f Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
-
Jeenu Viswambharan authored
The back end GIC driver converts and assigns the interrupt type to suitable group. For GICv2, a build option GICV2_G0_FOR_EL3 is introduced, which determines to which type Group 0 interrupts maps to. - When the build option is set 0 (the default), Group 0 interrupts are meant for Secure EL1. This is presently the case. - Otherwise, Group 0 interrupts are meant for EL3. This means the SPD will have to synchronously hand over the interrupt to Secure EL1. The query API allows the platform to query whether the platform supports interrupts of a given type. API documentation updated. Change-Id: I60fdb4053ffe0bd006b3b20914914ebd311fc858 Co-authored-by: Yousuf A <yousuf.sait@arm.com> Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
-
Jeenu Viswambharan authored
API documentation updated. Change-Id: Ib700eb1b8ca65503aeed0ac4ce0e7b934df67ff9 Co-authored-by: Yousuf A <yousuf.sait@arm.com> Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
-
Jeenu Viswambharan authored
API documentation updated. Change-Id: Ice7511f8df5356851001d2f7dc2a46cfe318f9ba Co-authored-by: Yousuf A <yousuf.sait@arm.com> Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
-
Jeenu Viswambharan authored
API documentation updated. Change-Id: I6d61785af0d5330930c709de971a904dc7c3516c Co-authored-by: Yousuf A <yousuf.sait@arm.com> Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
-
Jeenu Viswambharan authored
These APIs allow the GIC implementation to categorize interrupt numbers into SPIs, PPIs, and SGIs. The default implementations for GICv2 and GICv3 follows interrupt numbering as specified by the ARM GIC architecture. API documentation updated. Change-Id: Ia6aa379dc955994333232e6138f259535d4fa087 Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
-
Jeenu Viswambharan authored
Document the API in separate platform interrupt controller API document. Change-Id: If18f208e10a8a243f5c59d226fcf48e985941949 Co-authored-by: Yousuf A <yousuf.sait@arm.com> Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
-