GitLab

Update idle flow in case of last read command timeout.
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Change-Id: Idb0552d70d59b23822c38269d0fa9fe9ac0d6975

Add APU device apc driver and setup permission.
Signed-off-by: Flora Fu <flora.fu@mediatek.com>
Change-Id: I2bbdb69d11267e4252b2138b5c5ac8faf752740f

Add APU SiP call support for start/stop mcu.
Signed-off-by: Flora Fu <flora.fu@mediatek.com>
Change-Id: Ibf93d8ccf22c414de3093cee9e13f7668588f69e
Signed-off-by: Pi-Cheng Chen <pi-cheng.chen@mediatek.com>

MTK display port mute/unmute control registers need to be
set in secure world.
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: Iec73650e937bd20e25c18fa28d55ae29e68b10d3

Add APU iommap settings for reviser, apu_ao and
devapc control wrapper.
Signed-off-by: Flora Fu <flora.fu@mediatek.com>
Change-Id: Ie8e6a197c0f440f9e4ee8101202283a2dbf501a6

Setup APU_S_S_4/APU_S_S_5 permission as SEC_RW_ONLY.
Signed-off-by: Flora Fu <flora.fu@mediatek.com>
Change-Id: I6c50b2913bf34270a1b0ffaf0e0c435fee192a4c

mt8195 also uses mt6359p RTC. Revice mt8192 RTC and share the
driver with mt8195.

Change-Id: I20c73f6e0af67ef9d4c3d4e0ff373f93950e07db
Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>

mt8195 also uses PMIC mt6359p. The only difference is the
pwrap register definition.

Change-Id: I9962263c46187d1344f14f857bf4b51e33aedda0
Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>

Add system_reset function in PSCI ops
Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Change-Id: I177796e30198b0a53402093ee0917dda43074385

Add gpio driver.
Signed-off-by: mtk20895 <zhiqiang.ma@mediatek.com>
Change-Id: I6ff6875c35294f56f2d8298d75cd18c230aad211

Add the basic SiP service

Change-Id: I21fe9d85eac4be9101b12c4b6c28294c5b93cb5f
Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>

Implement PSCI platform OPs to support CPU hotplug and MCDI.
Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Change-Id: I1321f7989c8a3d116d698768a7146e8f180ee9c0

Add MCDI related drivers to handle CPU powered on/off in CPU suspend.
Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Change-Id: I6a6f9bf5d1d8bda1ee603d8bf3fc206437de7ad8

Add SPMC driver for CPU power on/off.
Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Change-Id: If47d7f3f3b9965f3c0402ea6cdb917ad1d16bb32

Initialize delay_timer for delay functions.

Change-Id: Ib554135151f8b5c642b5a6511c942bb9efc0a47f
Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>

Change-Id: I7e0fbd04b0cdf5da92b8ef39737342f2d66f5f10
Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>

The timer driver can be shared with mt8195. Move the the timer
driver to common/.
Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Change-Id: I84c97ab9cc9b469f35e0f44dd8e7b2b95f1b3926

MT8192 cirq driver can be shared with MT8195. Move cirq driver to common
common folder.
Signed-off-by: gtk_pangao <gtk_pangao@mediatek.com>
Change-Id: Iba5cdcfd2116f0bd07e0497250f2da45613e3a4f

MT8192 GIC driver can be shared with MT8195. Move GIC driver to common
and do the initialization.
Signed-off-by: christine.zhu <christine.zhu@mediatek.corp-partner.google.com>
Change-Id: I63f3e668b5ca6df8bcf17b5cd4d53fa84f330fed

- Add basic platform setup
- Add MT8195 documentation at docs/plat/
- Add generic CPU helper functions
- Add basic register address

Change-Id: I7978e2f32e58900e5cf93f741ee8eaf8b8e3b842
Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>

Add devapc driver for setting default permission.

Change-Id: I103f27ae090fbed76ce9319606ac082d78b74566
Signed-off-by: Nina Wu <nina-cm.wu@mediatek.com>

UART register definition is the same on MediaTek platforms.
Move uart.h to common folder and remove the duplicate file.
Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Change-Id: Iea0931dfd606ae4a7ab475b9cb3a08dc6de68b36

The case for value "VCOREFS_SMC_CMD_INIT" is not
terminated by a "break" statement.
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Change-Id: I56cc7c1648e101c0da6e77e592e6edbd5d37724e

1 Only enable domain D0 and D1:PCIe access 0xC0000000~0xC4000000;
2 Only enable domain D0 and D3(SCP) access 0x50000000~0x51400000;
Signed-off-by: Xi Chen <xixi.chen@mediatek.com>
Change-Id: Ic4f9e6d85bfd1cebdb24ffc1d14309c89c103b2a

Change-Id: I4bd4612a7c7727a5be70957ae940e5f51c7ca5e6
Signed-off-by: Roger Lu <roger.lu@mediatek.com>

Supports dram/mainpll/26m off when system suspend
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Change-Id: Id13a06d4132f00fb60066de75920ecac18306e32

Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Change-Id: I0ea7f61085ea9ba26c580107ef0cb9940a25f5e2

Low Power Management (LPM) helps find a suitable configuration
for letting system entering idle or suspend with the most
resources off.

Change-Id: Ie6a7063b666cf338cff5bc972c9025b26de482eb
Signed-off-by: Roger Lu <roger.lu@mediatek.com>

add mt6359p rtc power off sequence and enable k_eosc mode
Signed-off-by: Yuchen Huang <yuchen.huang@mediatek.com>
Change-Id: I65450c63c44ccb5082541dbbe28b8aa0a95ecc56

CID 364146: Control flow issues (DEADCODE)

Since the value of PSTATE_PWR_LVL_MASK and the value the of PLAT_MAX_PWR_LVL
are equal on mt8192, the following equation never hold.

if (aff_lvl > PLAT_MAX_PWR_LVL) {
	return PSCI_E_INVALID_PARAMS;
}

Remove the deadcode to comply with MISRA standard.
Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Change-Id: I71d0aa826eded8c3b5af961e733167ae40699398

CID 364144: Integer handling issues (NO_EFFECT)

The unsigned value is always greater-than-or-equal-to-zero.
Remove such check.

Change-Id: Ia395eb32f55a7098d2581ce7f548b7e1112beaa0
Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>

1 Add Domain1(PCIe device) protect address: 0x80000000~0x83FF0000.
2 Add Domain2(SSPM/SPM/DPM/MCUPM) protect address: 0x40000000~0x1FFFF0000.
Signed-off-by: Xi Chen <xixi.chen@mediatek.com>
Change-Id: I4aaed37150076ae5943484c4adadac999a3d1762

1. Add mcusys related dcm drivers
2. Turn on mcusys-related dcm by default

Change-Id: Ibbee37c87cc38e7a6cd7c93c2fc0817aad6dbe95
Signed-off-by: Nina Wu <nina-cm.wu@mediatek.com>

enable PTP3 for protecting sysPi
Signed-off-by: elly.chiang <elly.chiang@mediatek.com>
Change-Id: Ic3a13c8314f829dca8547861b98639d1d9444eb2

Add the basic SiP service

Change-Id: Ib7f2380aab910adf8d33498a79ecd287273907c5
Signed-off-by: Nina Wu <nina-cm.wu@mediatek.com>

When system resume, we want to print log as soon as possible.
So we add uart save and restore api, and they will be called
when systtem suspend and resume.

Change-Id: I83b477fd2b39567c9c6b70534ef186993f7053ae
Signed-off-by: Yuchen Huang <yuchen.huang@mediatek.com>
Signed-off-by: Roger Lu <roger.lu@mediatek.com>

1.Modify this driver to make it more complete and more standard.
2.And makes this driver available for more IC services.
3.Solve some bugs in the software.
Signed-off-by: G.Pangao <gtk_pangao@mediatek.com>
Change-Id: I284956d47ebbbd550ec93767679181185e442348

add power-off support
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Change-Id: If19e99971515a8ae1ac9ae21046e4382adc18a69

add pmic mt6359p driver
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Change-Id: I20f2218f7d2087e8d2bf31258cf92a02e0dab77d

Init delay_timer for the use of delay functions

Change-Id: I35aefd7515bb9259634c8b6bc37d8c74da96e8f1
Signed-off-by: Nina Wu <nina-cm.wu@mediatek.com>