/* * Copyright (c) 2016-2019, ARM Limited and Contributors. All rights reserved. * * SPDX-License-Identifier: BSD-3-Clause */ #ifndef RPI_HW_H #define RPI_HW_H #include /* * Peripherals */ #define RPI_IO_BASE ULL(0xFE000000) #define RPI_IO_SIZE ULL(0x02000000) /* * ARM <-> VideoCore mailboxes */ #define RPI3_MBOX_OFFSET ULL(0x0000B880) #define RPI3_MBOX_BASE (RPI_IO_BASE + RPI3_MBOX_OFFSET) /* VideoCore -> ARM */ #define RPI3_MBOX0_READ_OFFSET ULL(0x00000000) #define RPI3_MBOX0_PEEK_OFFSET ULL(0x00000010) #define RPI3_MBOX0_SENDER_OFFSET ULL(0x00000014) #define RPI3_MBOX0_STATUS_OFFSET ULL(0x00000018) #define RPI3_MBOX0_CONFIG_OFFSET ULL(0x0000001C) /* ARM -> VideoCore */ #define RPI3_MBOX1_WRITE_OFFSET ULL(0x00000020) #define RPI3_MBOX1_PEEK_OFFSET ULL(0x00000030) #define RPI3_MBOX1_SENDER_OFFSET ULL(0x00000034) #define RPI3_MBOX1_STATUS_OFFSET ULL(0x00000038) #define RPI3_MBOX1_CONFIG_OFFSET ULL(0x0000003C) /* Mailbox status constants */ #define RPI3_MBOX_STATUS_FULL_MASK U(0x80000000) /* Set if full */ #define RPI3_MBOX_STATUS_EMPTY_MASK U(0x40000000) /* Set if empty */ /* * Power management, reset controller, watchdog. */ #define RPI3_IO_PM_OFFSET ULL(0x00100000) #define RPI3_PM_BASE (RPI_IO_BASE + RPI3_IO_PM_OFFSET) /* Registers on top of RPI3_PM_BASE. */ #define RPI3_PM_RSTC_OFFSET ULL(0x0000001C) #define RPI3_PM_RSTS_OFFSET ULL(0x00000020) #define RPI3_PM_WDOG_OFFSET ULL(0x00000024) /* Watchdog constants */ #define RPI3_PM_PASSWORD U(0x5A000000) #define RPI3_PM_RSTC_WRCFG_MASK U(0x00000030) #define RPI3_PM_RSTC_WRCFG_FULL_RESET U(0x00000020) /* * The RSTS register is used by the VideoCore firmware when booting the * Raspberry Pi to know which partition to boot from. The partition value is * formed by bits 0, 2, 4, 6, 8 and 10. Partition 63 is used by said firmware * to indicate halt. */ #define RPI3_PM_RSTS_WRCFG_HALT U(0x00000555) /* * Hardware random number generator. */ #define RPI3_IO_RNG_OFFSET ULL(0x00104000) #define RPI3_RNG_BASE (RPI_IO_BASE + RPI3_IO_RNG_OFFSET) #define RPI3_RNG_CTRL_OFFSET ULL(0x00000000) #define RPI3_RNG_STATUS_OFFSET ULL(0x00000004) #define RPI3_RNG_DATA_OFFSET ULL(0x00000008) #define RPI3_RNG_INT_MASK_OFFSET ULL(0x00000010) /* Enable/disable RNG */ #define RPI3_RNG_CTRL_ENABLE U(0x1) #define RPI3_RNG_CTRL_DISABLE U(0x0) /* Number of currently available words */ #define RPI3_RNG_STATUS_NUM_WORDS_SHIFT U(24) #define RPI3_RNG_STATUS_NUM_WORDS_MASK U(0xFF) /* Value to mask interrupts caused by the RNG */ #define RPI3_RNG_INT_MASK_DISABLE U(0x1) /* * Serial port (called 'Mini UART' in the Broadcom documentation). */ #define RPI3_IO_MINI_UART_OFFSET ULL(0x00215040) #define RPI3_MINI_UART_BASE (RPI_IO_BASE + RPI3_IO_MINI_UART_OFFSET) /* * GPIO controller */ #define RPI3_IO_GPIO_OFFSET ULL(0x00200000) #define RPI3_GPIO_BASE (RPI_IO_BASE + RPI3_IO_GPIO_OFFSET) /* * SDHost controller */ #define RPI3_IO_SDHOST_OFFSET ULL(0x00202000) #define RPI3_SDHOST_BASE (RPI_IO_BASE + RPI3_IO_SDHOST_OFFSET) /* * GIC interrupt controller */ #define RPI_HAVE_GIC #define RPI4_GIC_GICD_BASE ULL(0xff841000) #define RPI4_GIC_GICC_BASE ULL(0xff842000) #define RPI4_LOCAL_CONTROL_BASE_ADDRESS ULL(0xff800000) #define RPI4_LOCAL_CONTROL_PRESCALER ULL(0xff800008) #endif /* RPI_HW_H */