/* * Copyright (c) 2013-2015, ARM Limited and Contributors. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * Redistributions of source code must retain the above copyright notice, this * list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * * Neither the name of ARM nor the names of its contributors may be used * to endorse or promote products derived from this software without specific * prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #include #include #include #include #include #include #include #include #include #include #include #include "psci_private.h" /******************************************************************************* * This function saves the power state parameter passed in the current PSCI * cpu_suspend call in the per-cpu data array. ******************************************************************************/ void psci_set_suspend_power_state(unsigned int power_state) { set_cpu_data(psci_svc_cpu_data.power_state, power_state); flush_cpu_data(psci_svc_cpu_data.power_state); } /******************************************************************************* * This function gets the power level till which the current cpu could be * powered down during a cpu_suspend call. Returns PSCI_INVALID_DATA if the * power state is invalid. ******************************************************************************/ int psci_get_suspend_pwrlvl(void) { unsigned int power_state; power_state = get_cpu_data(psci_svc_cpu_data.power_state); return ((power_state == PSCI_INVALID_DATA) ? power_state : psci_get_pstate_pwrlvl(power_state)); } /******************************************************************************* * This function gets the state id of the current cpu from the power state * parameter saved in the per-cpu data array. Returns PSCI_INVALID_DATA if the * power state saved is invalid. ******************************************************************************/ int psci_get_suspend_stateid(void) { unsigned int power_state; power_state = get_cpu_data(psci_svc_cpu_data.power_state); return ((power_state == PSCI_INVALID_DATA) ? power_state : psci_get_pstate_id(power_state)); } /******************************************************************************* * This function gets the state id of the cpu specified by the 'mpidr' parameter * from the power state parameter saved in the per-cpu data array. Returns * PSCI_INVALID_DATA if the power state saved is invalid. ******************************************************************************/ int psci_get_suspend_stateid_by_mpidr(unsigned long mpidr) { unsigned int power_state; power_state = get_cpu_data_by_index(plat_core_pos_by_mpidr(mpidr), psci_svc_cpu_data.power_state); return ((power_state == PSCI_INVALID_DATA) ? power_state : psci_get_pstate_id(power_state)); } /******************************************************************************* * Top level handler which is called when a cpu wants to suspend its execution. * It is assumed that along with suspending the cpu power domain, power domains * at higher levels until the target power level will be suspended as well. * It finds the highest level where a domain has to be suspended by traversing * the node information and then performs generic, architectural, platform * setup and state management required to suspend that power domain and domains * below it. * e.g. For a cpu that's to be suspended, it could mean programming * the power controller whereas for a cluster that's to be suspended, it will * call the platform specific code which will disable coherency at the * interconnect level if the cpu is the last in the cluster and also the * program the power controller. * * All the required parameter checks are performed at the beginning and after * the state transition has been done, no further error is expected and it is * not possible to undo any of the actions taken beyond that point. ******************************************************************************/ void psci_cpu_suspend_start(entry_point_info_t *ep, int end_pwrlvl) { int skip_wfi = 0; mpidr_pwr_map_nodes_t mpidr_nodes; unsigned int max_phys_off_pwrlvl; unsigned long psci_entrypoint; /* * This function must only be called on platforms where the * CPU_SUSPEND platform hooks have been implemented. */ assert(psci_plat_pm_ops->pwr_domain_suspend && psci_plat_pm_ops->pwr_domain_suspend_finish); /* * Collect the pointers to the nodes in the topology tree for * each power domain instance in the mpidr. If this function does * not return successfully then either the mpidr or the power * levels are incorrect. Either way, this an internal TF error * therefore assert. */ if (psci_get_pwr_map_nodes(read_mpidr_el1() & MPIDR_AFFINITY_MASK, MPIDR_AFFLVL0, end_pwrlvl, mpidr_nodes) != PSCI_E_SUCCESS) assert(0); /* * This function acquires the lock corresponding to each power * level so that by the time all locks are taken, the system topology * is snapshot and state management can be done safely. */ psci_acquire_pwr_domain_locks(MPIDR_AFFLVL0, end_pwrlvl, mpidr_nodes); /* * We check if there are any pending interrupts after the delay * introduced by lock contention to increase the chances of early * detection that a wake-up interrupt has fired. */ if (read_isr_el1()) { skip_wfi = 1; goto exit; } /* * Call the cpu suspend handler registered by the Secure Payload * Dispatcher to let it do any bookeeping. If the handler encounters an * error, it's expected to assert within */ if (psci_spd_pm && psci_spd_pm->svc_suspend) psci_spd_pm->svc_suspend(0); /* * This function updates the state of each power domain instance * corresponding to the mpidr in the range of power levels * specified. */ psci_do_state_coordination(MPIDR_AFFLVL0, end_pwrlvl, mpidr_nodes, PSCI_STATE_SUSPEND); max_phys_off_pwrlvl = psci_find_max_phys_off_pwrlvl(MPIDR_AFFLVL0, end_pwrlvl, mpidr_nodes); assert(max_phys_off_pwrlvl != PSCI_INVALID_DATA); /* * Store the re-entry information for the non-secure world. */ cm_init_my_context(ep); /* Set the secure world (EL3) re-entry point after BL1 */ psci_entrypoint = (unsigned long) psci_cpu_suspend_finish_entry; /* * Arch. management. Perform the necessary steps to flush all * cpu caches. */ psci_do_pwrdown_cache_maintenance(max_phys_off_pwrlvl); /* * Plat. management: Allow the platform to perform the * necessary actions to turn off this cpu e.g. set the * platform defined mailbox with the psci entrypoint, * program the power controller etc. */ psci_plat_pm_ops->pwr_domain_suspend(psci_entrypoint, max_phys_off_pwrlvl); exit: /* * Release the locks corresponding to each power level in the * reverse order to which they were acquired. */ psci_release_pwr_domain_locks(MPIDR_AFFLVL0, end_pwrlvl, mpidr_nodes); if (!skip_wfi) psci_power_down_wfi(); } /******************************************************************************* * The following functions finish an earlier suspend request. They * are called by the common finisher routine in psci_common.c. ******************************************************************************/ void psci_cpu_suspend_finish(pwr_map_node_t *node[], int pwrlvl) { int32_t suspend_level; uint64_t counter_freq; assert(node[pwrlvl]->level == pwrlvl); /* Ensure we have been woken up from a suspended state */ assert(psci_get_state(node[MPIDR_AFFLVL0]) == PSCI_STATE_SUSPEND); /* * Plat. management: Perform the platform specific actions * before we change the state of the cpu e.g. enabling the * gic or zeroing the mailbox register. If anything goes * wrong then assert as there is no way to recover from this * situation. */ psci_plat_pm_ops->pwr_domain_suspend_finish(pwrlvl); /* * Arch. management: Enable the data cache, manage stack memory and * restore the stashed EL3 architectural context from the 'cpu_context' * structure for this cpu. */ psci_do_pwrup_cache_maintenance(); /* Re-init the cntfrq_el0 register */ counter_freq = plat_get_syscnt_freq(); write_cntfrq_el0(counter_freq); /* * Call the cpu suspend finish handler registered by the Secure Payload * Dispatcher to let it do any bookeeping. If the handler encounters an * error, it's expected to assert within */ if (psci_spd_pm && psci_spd_pm->svc_suspend) { suspend_level = psci_get_suspend_pwrlvl(); assert (suspend_level != PSCI_INVALID_DATA); psci_spd_pm->svc_suspend_finish(suspend_level); } /* Invalidate the suspend context for the node */ psci_set_suspend_power_state(PSCI_INVALID_DATA); /* * Generic management: Now we just need to retrieve the * information that we had stashed away during the suspend * call to set this cpu on its way. */ cm_prepare_el3_exit(NON_SECURE); /* Clean caches before re-entering normal world */ dcsw_op_louis(DCCSW); }