/* * Copyright (c) 2015-2016, ARM Limited and Contributors. All rights reserved. * * SPDX-License-Identifier: BSD-3-Clause */ #ifndef __PLATFORM_DEF_H__ #define __PLATFORM_DEF_H__ #include #include #include /* Special value used to verify platform parameters from BL2 to BL3-1 */ #define QEMU_BL31_PLAT_PARAM_VAL 0x0f1e2d3c4b5a6978ULL #define PLATFORM_STACK_SIZE 0x1000 #define PLATFORM_MAX_CPUS_PER_CLUSTER 4 #define PLATFORM_CLUSTER_COUNT 2 #define PLATFORM_CLUSTER0_CORE_COUNT PLATFORM_MAX_CPUS_PER_CLUSTER #define PLATFORM_CLUSTER1_CORE_COUNT PLATFORM_MAX_CPUS_PER_CLUSTER #define PLATFORM_CORE_COUNT (PLATFORM_CLUSTER0_CORE_COUNT + \ PLATFORM_CLUSTER1_CORE_COUNT) #define QEMU_PRIMARY_CPU 0 #define PLAT_NUM_PWR_DOMAINS (PLATFORM_CLUSTER_COUNT + \ PLATFORM_CORE_COUNT) #define PLAT_MAX_PWR_LVL MPIDR_AFFLVL1 #define PLAT_MAX_RET_STATE 1 #define PLAT_MAX_OFF_STATE 2 /* Local power state for power domains in Run state. */ #define PLAT_LOCAL_STATE_RUN 0 /* Local power state for retention. Valid only for CPU power domains */ #define PLAT_LOCAL_STATE_RET 1 /* * Local power state for OFF/power-down. Valid for CPU and cluster power * domains. */ #define PLAT_LOCAL_STATE_OFF 2 /* * Macros used to parse state information from State-ID if it is using the * recommended encoding for State-ID. */ #define PLAT_LOCAL_PSTATE_WIDTH 4 #define PLAT_LOCAL_PSTATE_MASK ((1 << PLAT_LOCAL_PSTATE_WIDTH) - 1) /* * Some data must be aligned on the biggest cache line size in the platform. * This is known only to the platform as it might have a combination of * integrated and external caches. */ #define CACHE_WRITEBACK_SHIFT 6 #define CACHE_WRITEBACK_GRANULE (1 << CACHE_WRITEBACK_SHIFT) /* * Partition memory into secure ROM, non-secure DRAM, secure "SRAM", * and secure DRAM. */ #define SEC_ROM_BASE 0x00000000 #define SEC_ROM_SIZE 0x00020000 #define NS_DRAM0_BASE 0x40000000 #define NS_DRAM0_SIZE 0x3de00000 #define SEC_SRAM_BASE 0x0e000000 #define SEC_SRAM_SIZE 0x00040000 #define SEC_DRAM_BASE 0x0e100000 #define SEC_DRAM_SIZE 0x00f00000 /* Load pageable part of OP-TEE at end of secure DRAM */ #define QEMU_OPTEE_PAGEABLE_LOAD_BASE (SEC_DRAM_BASE + SEC_DRAM_SIZE - \ QEMU_OPTEE_PAGEABLE_LOAD_SIZE) #define QEMU_OPTEE_PAGEABLE_LOAD_SIZE 0x00400000 /* * ARM-TF lives in SRAM, partition it here */ #define SHARED_RAM_BASE SEC_SRAM_BASE #define SHARED_RAM_SIZE 0x00001000 #define PLAT_QEMU_TRUSTED_MAILBOX_BASE SHARED_RAM_BASE #define PLAT_QEMU_TRUSTED_MAILBOX_SIZE (8 + PLAT_QEMU_HOLD_SIZE) #define PLAT_QEMU_HOLD_BASE (PLAT_QEMU_TRUSTED_MAILBOX_BASE + 8) #define PLAT_QEMU_HOLD_SIZE (PLATFORM_CORE_COUNT * \ PLAT_QEMU_HOLD_ENTRY_SIZE) #define PLAT_QEMU_HOLD_ENTRY_SHIFT 3 #define PLAT_QEMU_HOLD_ENTRY_SIZE (1 << PLAT_QEMU_HOLD_ENTRY_SHIFT) #define PLAT_QEMU_HOLD_STATE_WAIT 0 #define PLAT_QEMU_HOLD_STATE_GO 1 #define BL_RAM_BASE (SHARED_RAM_BASE + SHARED_RAM_SIZE) #define BL_RAM_SIZE (SEC_SRAM_SIZE - SHARED_RAM_SIZE) /* * BL1 specific defines. * * BL1 RW data is relocated from ROM to RAM at runtime so we need 2 sets of * addresses. * Put BL1 RW at the top of the Secure SRAM. BL1_RW_BASE is calculated using * the current BL1 RW debug size plus a little space for growth. */ #define BL1_RO_BASE SEC_ROM_BASE #define BL1_RO_LIMIT (SEC_ROM_BASE + SEC_ROM_SIZE) #define BL1_RW_BASE (BL1_RW_LIMIT - 0x12000) #define BL1_RW_LIMIT (BL_RAM_BASE + BL_RAM_SIZE) /* * BL2 specific defines. * * Put BL2 just below BL3-1. BL2_BASE is calculated using the current BL2 debug * size plus a little space for growth. */ #define BL2_BASE (BL31_BASE - 0x1D000) #define BL2_LIMIT BL31_BASE /* * BL3-1 specific defines. * * Put BL3-1 at the top of the Trusted SRAM. BL31_BASE is calculated using the * current BL3-1 debug size plus a little space for growth. */ #define BL31_BASE (BL31_LIMIT - 0x20000) #define BL31_LIMIT (BL_RAM_BASE + BL_RAM_SIZE) #define BL31_PROGBITS_LIMIT BL1_RW_BASE /* * BL3-2 specific defines. * * BL3-2 can execute from Secure SRAM, or Secure DRAM. */ #define BL32_SRAM_BASE BL_RAM_BASE #define BL32_SRAM_LIMIT BL31_BASE #define BL32_DRAM_BASE SEC_DRAM_BASE #define BL32_DRAM_LIMIT (SEC_DRAM_BASE + SEC_DRAM_SIZE) #define SEC_SRAM_ID 0 #define SEC_DRAM_ID 1 #if BL32_RAM_LOCATION_ID == SEC_SRAM_ID # define BL32_MEM_BASE BL_RAM_BASE # define BL32_MEM_SIZE BL_RAM_SIZE # define BL32_BASE BL32_SRAM_BASE # define BL32_LIMIT BL32_SRAM_LIMIT #elif BL32_RAM_LOCATION_ID == SEC_DRAM_ID # define BL32_MEM_BASE SEC_DRAM_BASE # define BL32_MEM_SIZE SEC_DRAM_SIZE # define BL32_BASE BL32_DRAM_BASE # define BL32_LIMIT BL32_DRAM_LIMIT #else # error "Unsupported BL32_RAM_LOCATION_ID value" #endif #define NS_IMAGE_OFFSET 0x60000000 #define PLAT_PHY_ADDR_SPACE_SIZE (1ull << 32) #define PLAT_VIRT_ADDR_SPACE_SIZE (1ull << 32) #define MAX_MMAP_REGIONS 8 #define MAX_XLAT_TABLES 6 #define MAX_IO_DEVICES 3 #define MAX_IO_HANDLES 4 /* * PL011 related constants */ #define UART0_BASE 0x09000000 #define UART1_BASE 0x09040000 #define UART0_CLK_IN_HZ 1 #define UART1_CLK_IN_HZ 1 #define PLAT_QEMU_BOOT_UART_BASE UART0_BASE #define PLAT_QEMU_BOOT_UART_CLK_IN_HZ UART0_CLK_IN_HZ #define PLAT_QEMU_CRASH_UART_BASE UART1_BASE #define PLAT_QEMU_CRASH_UART_CLK_IN_HZ UART1_CLK_IN_HZ #define PLAT_QEMU_CONSOLE_BAUDRATE 115200 #define QEMU_FLASH0_BASE 0x04000000 #define QEMU_FLASH0_SIZE 0x04000000 #define PLAT_QEMU_FIP_BASE QEMU_FLASH0_BASE #define PLAT_QEMU_FIP_MAX_SIZE QEMU_FLASH0_SIZE #define DEVICE0_BASE 0x08000000 #define DEVICE0_SIZE 0x00021000 #define DEVICE1_BASE 0x09000000 #define DEVICE1_SIZE 0x00011000 /* * GIC related constants */ #define GICD_BASE 0x8000000 #define GICC_BASE 0x8010000 #define GICR_BASE 0 #define QEMU_IRQ_SEC_SGI_0 8 #define QEMU_IRQ_SEC_SGI_1 9 #define QEMU_IRQ_SEC_SGI_2 10 #define QEMU_IRQ_SEC_SGI_3 11 #define QEMU_IRQ_SEC_SGI_4 12 #define QEMU_IRQ_SEC_SGI_5 13 #define QEMU_IRQ_SEC_SGI_6 14 #define QEMU_IRQ_SEC_SGI_7 15 /* * DT related constants */ #define PLAT_QEMU_DT_BASE NS_DRAM0_BASE #define PLAT_QEMU_DT_MAX_SIZE 0x10000 /* * System counter */ #define SYS_COUNTER_FREQ_IN_TICKS ((1000 * 1000 * 1000) / 16) #endif /* __PLATFORM_DEF_H__ */