/* * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved. * * SPDX-License-Identifier: BSD-3-Clause */ #ifndef HI3660_H #define HI3660_H #include #include #include #define ASP_CFG_REG_BASE 0xE804E000 #define ASP_CFG_MMBUF_CTRL_REG (ASP_CFG_REG_BASE + 0x148) #define LP_RAM_BASE 0xFFF50000 #define SCTRL_REG_BASE 0xFFF0A000 #define SCTRL_CONTROL_REG (SCTRL_REG_BASE + 0x000) #define SCTRL_CONTROL_SYS_MODE(x) (((x) & 0xf) << 3) #define SCTRL_CONTROL_SYS_MODE_NORMAL ((1 << 2) << 3) #define SCTRL_CONTROL_SYS_MODE_SLOW ((1 << 1) << 3) #define SCTRL_CONTROL_SYS_MODE_MASK (0xf << 3) #define SCTRL_CONTROL_MODE_CTRL_NORMAL (1 << 2) #define SCTRL_CONTROL_MODE_CTRL_SLOW (1 << 1) #define SCTRL_CONTROL_MODE_CTRL_MASK 0x7 #define SCTRL_SCSYSSTAT_REG (SCTRL_REG_BASE + 0x004) #define SCTRL_DEEPSLEEPED_REG (SCTRL_REG_BASE + 0x008) #define SCTRL_EFUSE_USB_MASK (1 << 30) #define SCTRL_EFUSE_USB_PLL (1 << 30) #define SCTRL_EFUSE_USB_ABB (0 << 30) #define SCTRL_EFUSE_UFS_MASK (3 << 6) #define SCTRL_EFUSE_UFS_PLL (1 << 6) #define SCTRL_EFUSE_UFS_ABB (0 << 6) #define SCTRL_SCISOEN_REG (SCTRL_REG_BASE + 0x040) #define SCTRL_SCISODIS_REG (SCTRL_REG_BASE + 0x044) #define SCISO_MMBUFISO (1 << 3) #define SCTRL_SCPWREN_REG (SCTRL_REG_BASE + 0x060) #define SCPWREN_MMBUFPWREN (1 << 3) #define SCTRL_PLL_CTRL0_REG (SCTRL_REG_BASE + 0x100) #define SCTRL_PLL0_POSTDIV2(x) (((x) & 0x7) << 23) #define SCTRL_PLL0_POSTDIV1(x) (((x) & 0x7) << 20) #define SCTRL_PLL0_FBDIV(x) (((x) & 0xfff) << 8) #define SCTRL_PLL0_REFDIV(x) (((x) & 0x3f) << 2) #define SCTRL_PLL0_EN (1 << 0) #define SCTRL_PLL_CTRL1_REG (SCTRL_REG_BASE + 0x104) #define SCTRL_PLL0_CLK_NO_GATE (1 << 26) #define SCTRL_PLL0_CFG_VLD (1 << 25) #define SCTRL_PLL0_FRACDIV(x) ((x) & 0xFFFFFF) #define SCTRL_PLL_STAT_REG (SCTRL_REG_BASE + 0x10C) #define SCTRL_PLL0_STAT (1 << 0) #define SCTRL_SCPEREN0_REG (SCTRL_REG_BASE + 0x160) #define SCTRL_SCPERDIS0_REG (SCTRL_REG_BASE + 0x164) #define SCTRL_SCPERSTAT0_REG (SCTRL_REG_BASE + 0x168) #define SCTRL_SCPEREN1_REG (SCTRL_REG_BASE + 0x170) #define SCTRL_SCPERDIS1_REG (SCTRL_REG_BASE + 0x174) #define SCTRL_SCPEREN1_REG (SCTRL_REG_BASE + 0x170) #define SCTRL_SCPERDIS1_REG (SCTRL_REG_BASE + 0x174) #define SCPEREN1_WAIT_DDR_SELFREFRESH_DONE_BYPASS (1 << 31) #define SCPEREN_GT_PCLK_MMBUFCFG (1 << 25) #define SCPEREN_GT_PCLK_MMBUF (1 << 23) #define SCPEREN_GT_ACLK_MMBUF (1 << 22) #define SCPEREN_GT_CLK_NOC_AOBUS2MMBUF (1 << 6) #define SCTRL_SCPEREN2_REG (SCTRL_REG_BASE + 0x190) #define SCTRL_SCPERDIS2_REG (SCTRL_REG_BASE + 0x194) #define SCTRL_SCPERSTAT2_REG (SCTRL_REG_BASE + 0x198) #define SCTRL_SCPERRSTEN0_REG (SCTRL_REG_BASE + 0x200) #define SCTRL_SCPERRSTDIS0_REG (SCTRL_REG_BASE + 0x204) #define SCTRL_SCPERRSTSTAT0_REG (SCTRL_REG_BASE + 0x208) #define SCTRL_SCPERRSTEN1_REG (SCTRL_REG_BASE + 0x20C) #define SCTRL_SCPERRSTDIS1_REG (SCTRL_REG_BASE + 0x210) #define SCTRL_SCPERRSTSTAT1_REG (SCTRL_REG_BASE + 0x214) #define IP_RST_MMBUFCFG (1 << 12) #define IP_RST_MMBUF (1 << 11) #define SCTRL_SCPERRSTEN2_REG (SCTRL_REG_BASE + 0x218) #define SCTRL_SCPERRSTDIS2_REG (SCTRL_REG_BASE + 0x21C) #define SCTRL_SCPERRSTSTAT2_REG (SCTRL_REG_BASE + 0x220) #define SCTRL_SCCLKDIV2_REG (SCTRL_REG_BASE + 0x258) #define SEL_CLK_MMBUF_MASK (0x3 << 8) #define SEL_CLK_MMBUF_PLL0 (0x3 << 8) #define SCCLKDIV2_GT_PCLK_MMBUF (1 << 7) #define SCTRL_SCCLKDIV4_REG (SCTRL_REG_BASE + 0x260) #define GT_MMBUF_SYS (1 << 13) #define GT_MMBUF_FLL (1 << 12) #define GT_PLL_CLK_MMBUF (1 << 11) #define SCTRL_SCCLKDIV6_REG (SCTRL_REG_BASE + 0x268) #define SCTRL_SCPERCTRL7_REG (SCTRL_REG_BASE + 0x31C) #define SCTRL_SCPERSTAT6_REG (SCTRL_REG_BASE + 0x378) #define SCTRL_SCINNERSTAT_REG (SCTRL_REG_BASE + 0x3A0) #define EMMC_UFS_SEL (1 << 15) #define SCTRL_BAK_DATA0_REG (SCTRL_REG_BASE + 0x40C) #define SCTRL_BAK_DATA4_REG (SCTRL_REG_BASE + 0x41C) #define SCTRL_LPMCU_CLKEN_REG (SCTRL_REG_BASE + 0x480) #define SCTRL_LPMCU_CLKDIS_REG (SCTRL_REG_BASE + 0x484) #define SCTRL_LPMCU_RSTEN_REG (SCTRL_REG_BASE + 0x500) #define SCTRL_LPMCU_RSTDIS_REG (SCTRL_REG_BASE + 0x504) #define DDRC_SOFT_BIT (1 << 6) #define DDRC_CLK_BIT (1 << 5) #define SCTRL_SCPEREN0_SEC_REG (SCTRL_REG_BASE + 0x900) #define SCTRL_SCPERDIS0_SEC_REG (SCTRL_REG_BASE + 0x904) #define MMBUF_SEC_CTRL_MASK (0xfff << 20) #define MMBUF_SEC_CTRL(x) (((x) & 0xfff) << 20) #define SCTRL_PERRSTEN1_SEC_REG (SCTRL_REG_BASE + 0xA50) #define SCTRL_PERRSTDIS1_SEC_REG (SCTRL_REG_BASE + 0xA54) #define SCTRL_PERRSTSTAT1_SEC_REG (SCTRL_REG_BASE + 0xA58) #define RST_ASP_SUBSYS_BIT (1 << 0) #define SCTRL_PERRSTEN2_SEC_REG (SCTRL_REG_BASE + 0xB50) #define SCTRL_PERRSTDIS2_SEC_REG (SCTRL_REG_BASE + 0xB54) #define SCTRL_PERRSTSTAT2_SEC_REG (SCTRL_REG_BASE + 0xB58) #define SCTRL_HISEECLKDIV_REG (SCTRL_REG_BASE + 0xC28) #define SC_SEL_HISEE_PLL_MASK (1 << 4) #define SC_SEL_HISEE_PLL0 (1 << 4) #define SC_SEL_HISEE_PLL2 (0 << 4) #define SC_DIV_HISEE_PLL_MASK (7 << 16) #define SC_DIV_HISEE_PLL(x) ((x) & 0x7) #define SCTRL_SCSOCID0_REG (SCTRL_REG_BASE + 0xE00) #define PMC_REG_BASE 0xFFF31000 #define PMC_PPLL1_CTRL0_REG (PMC_REG_BASE + 0x038) #define PMC_PPLL1_CTRL1_REG (PMC_REG_BASE + 0x03C) #define PMC_PPLL2_CTRL0_REG (PMC_REG_BASE + 0x040) #define PMC_PPLL2_CTRL1_REG (PMC_REG_BASE + 0x044) #define PMC_PPLL3_CTRL0_REG (PMC_REG_BASE + 0x048) #define PMC_PPLL3_CTRL1_REG (PMC_REG_BASE + 0x04C) #define PPLLx_LOCK (1 << 26) #define PPLLx_WITHOUT_CLK_GATE (1 << 26) #define PPLLx_CFG_VLD (1 << 25) #define PPLLx_INT_MOD (1 << 24) #define PPLLx_POSTDIV2_MASK (0x7 << 23) #define PPLLx_POSTDIV2(x) (((x) & 0x7) << 23) #define PPLLx_POSTDIV1_MASK (0x7 << 20) #define PPLLx_POSTDIV1(x) (((x) & 0x7) << 20) #define PPLLx_FRACDIV_MASK (0x00FFFFFF) #define PPLLx_FRACDIV(x) ((x) & 0x00FFFFFF) #define PPLLx_FBDIV_MASK (0xfff << 8) #define PPLLx_FBDIV(x) (((x) & 0xfff) << 8) #define PPLLx_REFDIV_MASK (0x3f << 2) #define PPLLx_REFDIV(x) (((x) & 0x3f) << 2) #define PPLLx_BP (1 << 1) #define PPLLx_EN (1 << 0) #define PMC_DDRLP_CTRL_REG (PMC_REG_BASE + 0x30C) #define DDRC_CSYSREQ_CFG(x) ((x) & 0xF) #define PMC_NOC_POWER_IDLEREQ_REG (PMC_REG_BASE + 0x380) #define PMC_NOC_POWER_IDLEREQ_IVP (1 << 14) #define PMC_NOC_POWER_IDLEREQ_DSS (1 << 13) #define PMC_NOC_POWER_IDLEREQ_VENC (1 << 11) #define PMC_NOC_POWER_IDLEREQ_VDEC (1 << 10) #define PMC_NOC_POWER_IDLEREQ_ISP (1 << 5) #define PMC_NOC_POWER_IDLEREQ_VCODEC (1 << 4) #define DDRPHY_BYPASS_MODE (1 << 0) #define PMC_NOC_POWER_IDLEACK_REG (PMC_REG_BASE + 0x384) #define PMC_NOC_POWER_IDLE_REG (PMC_REG_BASE + 0x388) #define PMU_SSI0_REG_BASE 0xFFF34000 #define PMU_SSI0_LDO8_CTRL0_REG (PMU_SSI0_REG_BASE + (0x68 << 2)) #define LDO8_CTRL0_EN_1_8V 0x02 #define PMU_SSI0_CLK_TOP_CTRL7_REG (PMU_SSI0_REG_BASE + (0x10C << 2)) #define NP_XO_ABB_DIG (1 << 1) #define LP_CONFIG_REG_BASE 0xFFF3F000 #define DMAC_BASE 0xFDF30000 #define CCI400_REG_BASE 0xE8100000 #define CCI400_SL_IFACE3_CLUSTER_IX 0 #define CCI400_SL_IFACE4_CLUSTER_IX 1 #define GICD_REG_BASE 0xE82B1000 #define GICC_REG_BASE 0xE82B2000 /* * GIC400 interrupt handling related constants */ #define IRQ_SEC_PHY_TIMER 29 #define IRQ_SEC_SGI_0 8 #define IRQ_SEC_SGI_1 9 #define IRQ_SEC_SGI_2 10 #define IRQ_SEC_SGI_3 11 #define IRQ_SEC_SGI_4 12 #define IRQ_SEC_SGI_5 13 #define IRQ_SEC_SGI_6 14 #define IRQ_SEC_SGI_7 15 #define IRQ_SEC_SGI_8 16 #define IPC_REG_BASE 0xE896A000 #define IPC_BASE (IPC_REG_BASE) #define IOMG_REG_BASE 0xE896C000 /* GPIO46: HUB 3.3V enable. active low */ #define IOMG_044_REG (IOMG_REG_BASE + 0x0B0) #define IOMG_UART5_RX_REG (IOMG_REG_BASE + 0x0BC) #define IOMG_UART5_TX_REG (IOMG_REG_BASE + 0x0C0) #define IOCG_REG_BASE 0xE896C800 /* GPIO005: PMIC SSI. (2 << 4) */ #define IOCG_006_REG (IOCG_REG_BASE + 0x018) #define TIMER9_REG_BASE 0xE8A00000 #define WDT0_REG_BASE 0xE8A06000 #define WDT1_REG_BASE 0xE8A07000 #define WDT_CONTROL_OFFSET 0x008 #define WDT_LOCK_OFFSET 0xC00 #define WDT_UNLOCK 0x1ACCE551 #define WDT_LOCKED 1 #define PCTRL_REG_BASE 0xE8A09000 #define PCTRL_PERI_CTRL3_REG (PCTRL_REG_BASE + 0x010) #define PCTRL_PERI_CTRL24_REG (PCTRL_REG_BASE + 0x064) #define GPIO0_BASE UL(0xE8A0B000) #define GPIO1_BASE UL(0xE8A0C000) #define GPIO2_BASE UL(0xE8A0D000) #define GPIO3_BASE UL(0xE8A0E000) #define GPIO4_BASE UL(0xE8A0F000) #define GPIO5_BASE UL(0xE8A10000) #define GPIO6_BASE UL(0xE8A11000) #define GPIO7_BASE UL(0xE8A12000) #define GPIO8_BASE UL(0xE8A13000) #define GPIO9_BASE UL(0xE8A14000) #define GPIO10_BASE UL(0xE8A15000) #define GPIO11_BASE UL(0xE8A16000) #define GPIO12_BASE UL(0xE8A17000) #define GPIO13_BASE UL(0xE8A18000) #define GPIO14_BASE UL(0xE8A19000) #define GPIO15_BASE UL(0xE8A1A000) #define GPIO16_BASE UL(0xE8A1B000) #define GPIO17_BASE UL(0xE8A1C000) #define GPIO20_BASE UL(0xE8A1F000) #define GPIO21_BASE UL(0xE8A20000) #define TZC_REG_BASE 0xE8A21000 #define TZC_STAT0_REG (TZC_REG_BASE + 0x800) #define TZC_EN0_REG (TZC_REG_BASE + 0x804) #define TZC_DIS0_REG (TZC_REG_BASE + 0x808) #define TZC_STAT1_REG (TZC_REG_BASE + 0x80C) #define TZC_EN1_REG (TZC_REG_BASE + 0x810) #define TZC_DIS1_REG (TZC_REG_BASE + 0x814) #define TZC_STAT2_REG (TZC_REG_BASE + 0x818) #define TZC_EN2_REG (TZC_REG_BASE + 0x81C) #define TZC_DIS2_REG (TZC_REG_BASE + 0x820) #define TZC_STAT3_REG (TZC_REG_BASE + 0x824) #define TZC_EN3_REG (TZC_REG_BASE + 0x828) #define TZC_DIS3_REG (TZC_REG_BASE + 0x82C) #define TZC_STAT4_REG (TZC_REG_BASE + 0x830) #define TZC_EN4_REG (TZC_REG_BASE + 0x834) #define TZC_DIS4_REG (TZC_REG_BASE + 0x838) #define TZC_STAT5_REG (TZC_REG_BASE + 0x83C) #define TZC_EN5_REG (TZC_REG_BASE + 0x840) #define TZC_DIS5_REG (TZC_REG_BASE + 0x844) #define TZC_STAT6_REG (TZC_REG_BASE + 0x848) #define TZC_EN6_REG (TZC_REG_BASE + 0x84C) #define TZC_DIS6_REG (TZC_REG_BASE + 0x850) #define TZC_STAT7_REG (TZC_REG_BASE + 0x854) #define TZC_EN7_REG (TZC_REG_BASE + 0x858) #define TZC_DIS7_REG (TZC_REG_BASE + 0x85C) #define TZC_STAT8_REG (TZC_REG_BASE + 0x860) #define TZC_EN8_REG (TZC_REG_BASE + 0x864) #define TZC_DIS8_REG (TZC_REG_BASE + 0x868) #define MMBUF_BASE 0xEA800000 #define ACPU_DMCPACK0_BASE 0xEA900000 #define ACPU_DMCPACK1_BASE 0xEA920000 #define ACPU_DMCPACK2_BASE 0xEA940000 #define ACPU_DMCPACK3_BASE 0xEA960000 #define UART5_REG_BASE 0xFDF05000 #define USB3OTG_REG_BASE 0xFF100000 #define UFS_REG_BASE 0xFF3B0000 #define UFS_SYS_REG_BASE 0xFF3B1000 #define UFS_SYS_PSW_POWER_CTRL_REG (UFS_SYS_REG_BASE + 0x004) #define UFS_SYS_PHY_ISO_EN_REG (UFS_SYS_REG_BASE + 0x008) #define UFS_SYS_HC_LP_CTRL_REG (UFS_SYS_REG_BASE + 0x00C) #define UFS_SYS_PHY_CLK_CTRL_REG (UFS_SYS_REG_BASE + 0x010) #define UFS_SYS_PSW_CLK_CTRL_REG (UFS_SYS_REG_BASE + 0x014) #define UFS_SYS_CLOCK_GATE_BYPASS_REG (UFS_SYS_REG_BASE + 0x018) #define UFS_SYS_RESET_CTRL_EN_REG (UFS_SYS_REG_BASE + 0x01C) #define UFS_SYS_MONITOR_HH_REG (UFS_SYS_REG_BASE + 0x03C) #define UFS_SYS_UFS_SYSCTRL_REG (UFS_SYS_REG_BASE + 0x05C) #define UFS_SYS_UFS_DEVICE_RESET_CTRL_REG (UFS_SYS_REG_BASE + 0x060) #define UFS_SYS_UFS_APB_ADDR_MASK_REG (UFS_SYS_REG_BASE + 0x064) #define BIT_UFS_PSW_ISO_CTRL (1 << 16) #define BIT_UFS_PSW_MTCMOS_EN (1 << 0) #define BIT_UFS_REFCLK_ISO_EN (1 << 16) #define BIT_UFS_PHY_ISO_CTRL (1 << 0) #define BIT_SYSCTRL_LP_ISOL_EN (1 << 16) #define BIT_SYSCTRL_PWR_READY (1 << 8) #define BIT_SYSCTRL_REF_CLOCK_EN (1 << 24) #define MASK_SYSCTRL_REF_CLOCK_SEL (3 << 8) #define MASK_SYSCTRL_CFG_CLOCK_FREQ (0xFF) #define BIT_SYSCTRL_PSW_CLK_EN (1 << 4) #define MASK_UFS_CLK_GATE_BYPASS (0x3F) #define BIT_SYSCTRL_LP_RESET_N (1 << 0) #define BIT_UFS_REFCLK_SRC_SE1 (1 << 0) #define MASK_UFS_SYSCTRL_BYPASS (0x3F << 16) #define MASK_UFS_DEVICE_RESET (1 << 16) #define BIT_UFS_DEVICE_RESET (1 << 0) #define GPIO18_BASE UL(0xFF3B4000) #define GPIO19_BASE UL(0xFF3B5000) #define IOMG_FIX_REG_BASE 0xFF3B6000 /* GPIO150: LED */ #define IOMG_FIX_006_REG (IOMG_FIX_REG_BASE + 0x018) /* GPIO151: LED */ #define IOMG_FIX_007_REG (IOMG_FIX_REG_BASE + 0x01C) #define IOMG_AO_REG_BASE 0xFFF11000 /* GPIO189: LED */ #define IOMG_AO_011_REG (IOMG_AO_REG_BASE + 0x02C) /* GPIO190: LED */ #define IOMG_AO_012_REG (IOMG_AO_REG_BASE + 0x030) /* GPIO202: type C enable. active low */ #define IOMG_AO_023_REG (IOMG_AO_REG_BASE + 0x05C) /* GPIO206: USB switch. active low */ #define IOMG_AO_026_REG (IOMG_AO_REG_BASE + 0x068) /* GPIO219: PD interrupt. pull up */ #define IOMG_AO_039_REG (IOMG_AO_REG_BASE + 0x09C) /* GPIO213: PCIE_CLKREQ_N */ #define IOMG_AO_033_REG (IOMG_AO_REG_BASE + 0x084) #define IOCG_AO_REG_BASE 0xFFF1187C /* GPIO219: PD interrupt. pull up */ #define IOCG_AO_043_REG (IOCG_AO_REG_BASE + 0x030) #endif /* HI3660_H */