/* * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved. * * SPDX-License-Identifier: BSD-3-Clause */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* For FOPEN_MODE_... */ #include #include "hikey_private.h" #define EMMC_BLOCK_SHIFT 9 /* Page 1024, since only a few pages before 2048 are used as partition table */ #define SERIALNO_EMMC_OFFSET (1024 * 512) struct plat_io_policy { uintptr_t *dev_handle; uintptr_t image_spec; int (*check)(const uintptr_t spec); }; static const io_dev_connector_t *emmc_dev_con; static uintptr_t emmc_dev_handle; static const io_dev_connector_t *fip_dev_con; static uintptr_t fip_dev_handle; static int check_emmc(const uintptr_t spec); static int check_fip(const uintptr_t spec); static const io_block_spec_t emmc_fip_spec = { .offset = HIKEY_FIP_BASE, .length = HIKEY_FIP_MAX_SIZE, }; static const io_block_dev_spec_t emmc_dev_spec = { /* It's used as temp buffer in block driver. */ #if IMAGE_BL1 .buffer = { .offset = HIKEY_BL1_MMC_DATA_BASE, .length = HIKEY_BL1_MMC_DATA_SIZE, }, #else .buffer = { .offset = HIKEY_MMC_DATA_BASE, .length = HIKEY_MMC_DATA_SIZE, }, #endif .ops = { .read = emmc_read_blocks, .write = emmc_write_blocks, }, .block_size = EMMC_BLOCK_SIZE, }; static const io_uuid_spec_t bl2_uuid_spec = { .uuid = UUID_TRUSTED_BOOT_FIRMWARE_BL2, }; static const io_uuid_spec_t bl31_uuid_spec = { .uuid = UUID_EL3_RUNTIME_FIRMWARE_BL31, }; static const io_uuid_spec_t bl32_uuid_spec = { .uuid = UUID_SECURE_PAYLOAD_BL32, }; static const io_uuid_spec_t bl33_uuid_spec = { .uuid = UUID_NON_TRUSTED_FIRMWARE_BL33, }; static const io_uuid_spec_t scp_bl2_uuid_spec = { .uuid = UUID_SCP_FIRMWARE_SCP_BL2, }; static const struct plat_io_policy policies[] = { [FIP_IMAGE_ID] = { &emmc_dev_handle, (uintptr_t)&emmc_fip_spec, check_emmc }, [BL2_IMAGE_ID] = { &fip_dev_handle, (uintptr_t)&bl2_uuid_spec, check_fip }, [SCP_BL2_IMAGE_ID] = { &fip_dev_handle, (uintptr_t)&scp_bl2_uuid_spec, check_fip }, [BL31_IMAGE_ID] = { &fip_dev_handle, (uintptr_t)&bl31_uuid_spec, check_fip }, [BL32_IMAGE_ID] = { &fip_dev_handle, (uintptr_t)&bl32_uuid_spec, check_fip }, [BL33_IMAGE_ID] = { &fip_dev_handle, (uintptr_t)&bl33_uuid_spec, check_fip } }; static int check_emmc(const uintptr_t spec) { int result; uintptr_t local_handle; result = io_dev_init(emmc_dev_handle, (uintptr_t)NULL); if (result == 0) { result = io_open(emmc_dev_handle, spec, &local_handle); if (result == 0) io_close(local_handle); } return result; } static int check_fip(const uintptr_t spec) { int result; uintptr_t local_image_handle; /* See if a Firmware Image Package is available */ result = io_dev_init(fip_dev_handle, (uintptr_t)FIP_IMAGE_ID); if (result == 0) { result = io_open(fip_dev_handle, spec, &local_image_handle); if (result == 0) { VERBOSE("Using FIP\n"); io_close(local_image_handle); } } return result; } void hikey_io_setup(void) { int result; result = register_io_dev_block(&emmc_dev_con); assert(result == 0); result = register_io_dev_fip(&fip_dev_con); assert(result == 0); result = io_dev_open(emmc_dev_con, (uintptr_t)&emmc_dev_spec, &emmc_dev_handle); assert(result == 0); result = io_dev_open(fip_dev_con, (uintptr_t)NULL, &fip_dev_handle); assert(result == 0); /* Ignore improbable errors in release builds */ (void)result; } /* Return an IO device handle and specification which can be used to access * an image. Use this to enforce platform load policy */ int plat_get_image_source(unsigned int image_id, uintptr_t *dev_handle, uintptr_t *image_spec) { int result; const struct plat_io_policy *policy; assert(image_id < ARRAY_SIZE(policies)); policy = &policies[image_id]; result = policy->check(policy->image_spec); assert(result == 0); *image_spec = policy->image_spec; *dev_handle = *(policy->dev_handle); return result; }