/* * Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * Redistributions of source code must retain the above copyright notice, this * list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * * Neither the name of ARM nor the names of its contributors may be used * to endorse or promote products derived from this software without specific * prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #include #include #include #include #include #include #include #include #include unsigned long page_align(unsigned long value, unsigned dir) { unsigned long page_size = 1 << FOUR_KB_SHIFT; /* Round up the limit to the next page boundary */ if (value & (page_size - 1)) { value &= ~(page_size - 1); if (dir == UP) value += page_size; } return value; } static inline unsigned int is_page_aligned (unsigned long addr) { const unsigned long page_size = 1 << FOUR_KB_SHIFT; return (addr & (page_size - 1)) == 0; } void change_security_state(unsigned int target_security_state) { unsigned long scr = read_scr(); if (target_security_state == SECURE) scr &= ~SCR_NS_BIT; else if (target_security_state == NON_SECURE) scr |= SCR_NS_BIT; else assert(0); write_scr(scr); } /******************************************************************************* * The next two functions are the weak definitions. Platform specific * code can override them if it wishes to. ******************************************************************************/ /******************************************************************************* * Function that takes a memory layout into which BL31 has been either top or * bottom loaded. Using this information, it populates bl31_mem_layout to tell * BL31 how much memory it has access to and how much is available for use. It * does not need the address where BL31 has been loaded as BL31 will reclaim * all the memory used by BL2. * TODO: Revisit if this and init_bl2_mem_layout can be replaced by a single * routine. ******************************************************************************/ void init_bl31_mem_layout(const meminfo_t *bl2_mem_layout, meminfo_t *bl31_mem_layout, unsigned int load_type) { if (load_type == BOT_LOAD) { /* * ------------ ^ * | BL2 | | * |----------| ^ | BL2 * | | | BL2 free | total * | | | size | size * |----------| BL2 free base v | * | BL31 | | * ------------ BL2 total base v */ unsigned long bl31_size; bl31_mem_layout->free_base = bl2_mem_layout->free_base; bl31_size = bl2_mem_layout->free_base - bl2_mem_layout->total_base; bl31_mem_layout->free_size = bl2_mem_layout->total_size - bl31_size; } else { /* * ------------ ^ * | BL31 | | * |----------| ^ | BL2 * | | | BL2 free | total * | | | size | size * |----------| BL2 free base v | * | BL2 | | * ------------ BL2 total base v */ unsigned long bl2_size; bl31_mem_layout->free_base = bl2_mem_layout->total_base; bl2_size = bl2_mem_layout->free_base - bl2_mem_layout->total_base; bl31_mem_layout->free_size = bl2_mem_layout->free_size + bl2_size; } bl31_mem_layout->total_base = bl2_mem_layout->total_base; bl31_mem_layout->total_size = bl2_mem_layout->total_size; bl31_mem_layout->attr = load_type; flush_dcache_range((unsigned long) bl31_mem_layout, sizeof(meminfo_t)); return; } /******************************************************************************* * Function that takes a memory layout into which BL2 has been either top or * bottom loaded along with the address where BL2 has been loaded in it. Using * this information, it populates bl2_mem_layout to tell BL2 how much memory * it has access to and how much is available for use. ******************************************************************************/ void init_bl2_mem_layout(meminfo_t *bl1_mem_layout, meminfo_t *bl2_mem_layout, unsigned int load_type, unsigned long bl2_base) { unsigned tmp; if (load_type == BOT_LOAD) { bl2_mem_layout->total_base = bl2_base; tmp = bl1_mem_layout->free_base - bl2_base; bl2_mem_layout->total_size = bl1_mem_layout->free_size + tmp; } else { bl2_mem_layout->total_base = bl1_mem_layout->free_base; tmp = bl1_mem_layout->total_base + bl1_mem_layout->total_size; bl2_mem_layout->total_size = tmp - bl1_mem_layout->free_base; } bl2_mem_layout->free_base = bl1_mem_layout->free_base; bl2_mem_layout->free_size = bl1_mem_layout->free_size; bl2_mem_layout->attr = load_type; flush_dcache_range((unsigned long) bl2_mem_layout, sizeof(meminfo_t)); return; } static void dump_load_info(unsigned long image_load_addr, unsigned long image_size, const meminfo_t *mem_layout) { #if DEBUG printf("Trying to load image at address 0x%lx, size = 0x%lx\r\n", image_load_addr, image_size); printf("Current memory layout:\r\n"); printf(" total region = [0x%lx, 0x%lx]\r\n", mem_layout->total_base, mem_layout->total_base + mem_layout->total_size); printf(" free region = [0x%lx, 0x%lx]\r\n", mem_layout->free_base, mem_layout->free_base + mem_layout->free_size); #endif } /* Generic function to return the size of an image */ unsigned long image_size(const char *image_name) { uintptr_t dev_handle; uintptr_t image_handle; uintptr_t image_spec; size_t image_size = 0; int io_result = IO_FAIL; assert(image_name != NULL); /* Obtain a reference to the image by querying the platform layer */ io_result = plat_get_image_source(image_name, &dev_handle, &image_spec); if (io_result != IO_SUCCESS) { WARN("Failed to obtain reference to image '%s' (%i)\n", image_name, io_result); return 0; } /* Attempt to access the image */ io_result = io_open(dev_handle, image_spec, &image_handle); if (io_result != IO_SUCCESS) { WARN("Failed to access image '%s' (%i)\n", image_name, io_result); return 0; } /* Find the size of the image */ io_result = io_size(image_handle, &image_size); if ((io_result != IO_SUCCESS) || (image_size == 0)) { WARN("Failed to determine the size of the image '%s' file (%i)\n", image_name, io_result); } io_result = io_close(image_handle); /* Ignore improbable/unrecoverable error in 'close' */ /* TODO: Consider maintaining open device connection from this * bootloader stage */ io_result = io_dev_close(dev_handle); /* Ignore improbable/unrecoverable error in 'dev_close' */ return image_size; } /******************************************************************************* * Generic function to load an image into the trusted RAM, * given a name, extents of free memory & whether the image should be loaded at * the bottom or top of the free memory. It updates the memory layout if the * load is successful. It also updates the image information and the entry point * information in the params passed ******************************************************************************/ int load_image(meminfo_t *mem_layout, const char *image_name, unsigned int load_type, unsigned long fixed_addr, image_info_t *image_data, entry_point_info_t *entry_point_info) { uintptr_t dev_handle; uintptr_t image_handle; uintptr_t image_spec; unsigned long temp_image_base = 0; unsigned long image_base = 0; long offset = 0; size_t image_size = 0; size_t bytes_read = 0; int io_result = IO_FAIL; assert(mem_layout != NULL); assert(image_name != NULL); assert(image_data->h.version >= VERSION_1); /* Obtain a reference to the image by querying the platform layer */ io_result = plat_get_image_source(image_name, &dev_handle, &image_spec); if (io_result != IO_SUCCESS) { WARN("Failed to obtain reference to image '%s' (%i)\n", image_name, io_result); return io_result; } /* Attempt to access the image */ io_result = io_open(dev_handle, image_spec, &image_handle); if (io_result != IO_SUCCESS) { WARN("Failed to access image '%s' (%i)\n", image_name, io_result); return io_result; } /* Find the size of the image */ io_result = io_size(image_handle, &image_size); if ((io_result != IO_SUCCESS) || (image_size == 0)) { WARN("Failed to determine the size of the image '%s' file (%i)\n", image_name, io_result); goto exit; } /* See if we have enough space */ if (image_size > mem_layout->free_size) { WARN("Cannot load '%s' file: Not enough space.\n", image_name); dump_load_info(0, image_size, mem_layout); goto exit; } switch (load_type) { case TOP_LOAD: /* Load the image in the top of free memory */ temp_image_base = mem_layout->free_base + mem_layout->free_size; temp_image_base -= image_size; /* Page align base address and check whether the image still fits */ image_base = page_align(temp_image_base, DOWN); assert(image_base <= temp_image_base); if (image_base < mem_layout->free_base) { WARN("Cannot load '%s' file: Not enough space.\n", image_name); dump_load_info(image_base, image_size, mem_layout); io_result = -ENOMEM; goto exit; } /* Calculate the amount of extra memory used due to alignment */ offset = temp_image_base - image_base; break; case BOT_LOAD: /* Load the BL2 image in the bottom of free memory */ temp_image_base = mem_layout->free_base; image_base = page_align(temp_image_base, UP); assert(image_base >= temp_image_base); /* Page align base address and check whether the image still fits */ if (image_base + image_size > mem_layout->free_base + mem_layout->free_size) { WARN("Cannot load '%s' file: Not enough space.\n", image_name); dump_load_info(image_base, image_size, mem_layout); io_result = -ENOMEM; goto exit; } /* Calculate the amount of extra memory used due to alignment */ offset = image_base - temp_image_base; break; default: assert(0); } /* * Some images must be loaded at a fixed address, not a dynamic one. * * This has been implemented as a hack on top of the existing dynamic * loading mechanism, for the time being. If the 'fixed_addr' function * argument is different from zero, then it will force the load address. * So we still have this principle of top/bottom loading but the code * determining the load address is bypassed and the load address is * forced to the fixed one. * * This can result in quite a lot of wasted space because we still use * 1 sole meminfo structure to represent the extents of free memory, * where we should use some sort of linked list. * * E.g. we want to load BL2 at address 0x04020000, the resulting memory * layout should look as follows: * ------------ 0x04040000 * | | <- Free space (1) * |----------| * | BL2 | * |----------| 0x04020000 * | | <- Free space (2) * |----------| * | BL1 | * ------------ 0x04000000 * * But in the current hacky implementation, we'll need to specify * whether BL2 is loaded at the top or bottom of the free memory. * E.g. if BL2 is considered as top-loaded, the meminfo structure * will give the following view of the memory, hiding the chunk of * free memory above BL2: * ------------ 0x04040000 * | | * | | * | BL2 | * |----------| 0x04020000 * | | <- Free space (2) * |----------| * | BL1 | * ------------ 0x04000000 */ if (fixed_addr != 0) { /* Load the image at the given address. */ image_base = fixed_addr; /* Check whether the image fits. */ if ((image_base < mem_layout->free_base) || (image_base + image_size > mem_layout->free_base + mem_layout->free_size)) { WARN("Cannot load '%s' file: Not enough space.\n", image_name); dump_load_info(image_base, image_size, mem_layout); io_result = -ENOMEM; goto exit; } /* Check whether the fixed load address is page-aligned. */ if (!is_page_aligned(image_base)) { WARN("Cannot load '%s' file at unaligned address 0x%lx\n", image_name, fixed_addr); io_result = -ENOMEM; goto exit; } /* * Calculate the amount of extra memory used due to fixed * loading. */ if (load_type == TOP_LOAD) { unsigned long max_addr, space_used; /* * ------------ max_addr * | /wasted/ | | offset * |..........|.............................. * | image | | image_flen * |----------| fixed_addr * | | * | | * ------------ total_base */ max_addr = mem_layout->total_base + mem_layout->total_size; /* * Compute the amount of memory used by the image. * Corresponds to all space above the image load * address. */ space_used = max_addr - fixed_addr; /* * Calculate the amount of wasted memory within the * amount of memory used by the image. */ offset = space_used - image_size; } else /* BOT_LOAD */ /* * ------------ * | | * | | * |----------| * | image | * |..........| fixed_addr * | /wasted/ | | offset * ------------ total_base */ offset = fixed_addr - mem_layout->total_base; } /* We have enough space so load the image now */ /* TODO: Consider whether to try to recover/retry a partially successful read */ io_result = io_read(image_handle, image_base, image_size, &bytes_read); if ((io_result != IO_SUCCESS) || (bytes_read < image_size)) { WARN("Failed to load '%s' file (%i)\n", image_name, io_result); goto exit; } image_data->image_base = image_base; image_data->image_size = image_size; entry_point_info->pc = image_base; /* * File has been successfully loaded. Update the free memory * data structure & flush the contents of the TZRAM so that * the next EL can see it. */ /* Update the memory contents */ flush_dcache_range(image_base, image_size); mem_layout->free_size -= image_size + offset; /* Update the base of free memory since its moved up */ if (load_type == BOT_LOAD) mem_layout->free_base += offset + image_size; exit: io_close(image_handle); /* Ignore improbable/unrecoverable error in 'close' */ /* TODO: Consider maintaining open device connection from this bootloader stage */ io_dev_close(dev_handle); /* Ignore improbable/unrecoverable error in 'dev_close' */ return io_result; }