/* * Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * Redistributions of source code must retain the above copyright notice, this * list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * * Neither the name of ARM nor the names of its contributors may be used * to endorse or promote products derived from this software without specific * prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #include #include #include #include #include #include #include #include #include #include "../fvp_def.h" /******************************************************************************* * This array holds the characteristics of the differences between the three * FVP platforms (Base, A53_A57 & Foundation). It will be populated during cold * boot at each boot stage by the primary before enabling the MMU (to allow cci * configuration) & used thereafter. Each BL will have its own copy to allow * independent operation. ******************************************************************************/ static unsigned long fvp_config[CONFIG_LIMIT]; /* * Table of regions to map using the MMU. * This doesn't include TZRAM as the 'mem_layout' argument passed to * configure_mmu_elx() will give the available subset of that, */ const mmap_region_t fvp_mmap[] = { { TZROM_BASE, TZROM_BASE, TZROM_SIZE, MT_MEMORY | MT_RO | MT_SECURE }, { TZDRAM_BASE, TZDRAM_BASE, TZDRAM_SIZE, MT_MEMORY | MT_RW | MT_SECURE }, { FLASH0_BASE, FLASH0_BASE, FLASH0_SIZE, MT_MEMORY | MT_RO | MT_SECURE }, { FLASH1_BASE, FLASH1_BASE, FLASH1_SIZE, MT_MEMORY | MT_RO | MT_SECURE }, { VRAM_BASE, VRAM_BASE, VRAM_SIZE, MT_MEMORY | MT_RW | MT_SECURE }, { DEVICE0_BASE, DEVICE0_BASE, DEVICE0_SIZE, MT_DEVICE | MT_RW | MT_SECURE }, { DEVICE1_BASE, DEVICE1_BASE, DEVICE1_SIZE, MT_DEVICE | MT_RW | MT_SECURE }, /* 2nd GB as device for now...*/ { 0x40000000, 0x40000000, 0x40000000, MT_DEVICE | MT_RW | MT_SECURE }, { DRAM1_BASE, DRAM1_BASE, DRAM1_SIZE, MT_MEMORY | MT_RW | MT_NS }, {0} }; /******************************************************************************* * Macro generating the code for the function setting up the pagetables as per * the platform memory map & initialize the mmu, for the given exception level ******************************************************************************/ #define DEFINE_CONFIGURE_MMU_EL(_el) \ void fvp_configure_mmu_el##_el(unsigned long total_base, \ unsigned long total_size, \ unsigned long ro_start, \ unsigned long ro_limit, \ unsigned long coh_start, \ unsigned long coh_limit) \ { \ mmap_add_region(total_base, total_base, \ total_size, \ MT_MEMORY | MT_RW | MT_SECURE); \ mmap_add_region(ro_start, ro_start, \ ro_limit - ro_start, \ MT_MEMORY | MT_RO | MT_SECURE); \ mmap_add_region(coh_start, coh_start, \ coh_limit - coh_start, \ MT_DEVICE | MT_RW | MT_SECURE); \ mmap_add(fvp_mmap); \ init_xlat_tables(); \ \ enable_mmu_el##_el(); \ } /* Define EL1 and EL3 variants of the function initialising the MMU */ DEFINE_CONFIGURE_MMU_EL(1) DEFINE_CONFIGURE_MMU_EL(3) /* Simple routine which returns a configuration variable value */ unsigned long fvp_get_cfgvar(unsigned int var_id) { assert(var_id < CONFIG_LIMIT); return fvp_config[var_id]; } /******************************************************************************* * A single boot loader stack is expected to work on both the Foundation FVP * models and the two flavours of the Base FVP models (AEMv8 & Cortex). The * SYS_ID register provides a mechanism for detecting the differences between * these platforms. This information is stored in a per-BL array to allow the * code to take the correct path.Per BL platform configuration. ******************************************************************************/ int fvp_config_setup(void) { unsigned int rev, hbi, bld, arch, sys_id, midr_pn; sys_id = mmio_read_32(VE_SYSREGS_BASE + V2M_SYS_ID); rev = (sys_id >> SYS_ID_REV_SHIFT) & SYS_ID_REV_MASK; hbi = (sys_id >> SYS_ID_HBI_SHIFT) & SYS_ID_HBI_MASK; bld = (sys_id >> SYS_ID_BLD_SHIFT) & SYS_ID_BLD_MASK; arch = (sys_id >> SYS_ID_ARCH_SHIFT) & SYS_ID_ARCH_MASK; if ((rev != REV_FVP) || (arch != ARCH_MODEL)) panic(); /* * The build field in the SYS_ID tells which variant of the GIC * memory is implemented by the model. */ switch (bld) { case BLD_GIC_VE_MMAP: fvp_config[CONFIG_GICD_ADDR] = VE_GICD_BASE; fvp_config[CONFIG_GICC_ADDR] = VE_GICC_BASE; fvp_config[CONFIG_GICH_ADDR] = VE_GICH_BASE; fvp_config[CONFIG_GICV_ADDR] = VE_GICV_BASE; break; case BLD_GIC_A53A57_MMAP: fvp_config[CONFIG_GICD_ADDR] = BASE_GICD_BASE; fvp_config[CONFIG_GICC_ADDR] = BASE_GICC_BASE; fvp_config[CONFIG_GICH_ADDR] = BASE_GICH_BASE; fvp_config[CONFIG_GICV_ADDR] = BASE_GICV_BASE; break; default: assert(0); } /* * The hbi field in the SYS_ID is 0x020 for the Base FVP & 0x010 * for the Foundation FVP. */ switch (hbi) { case HBI_FOUNDATION: fvp_config[CONFIG_MAX_AFF0] = 4; fvp_config[CONFIG_MAX_AFF1] = 1; fvp_config[CONFIG_CPU_SETUP] = 0; fvp_config[CONFIG_BASE_MMAP] = 0; fvp_config[CONFIG_HAS_CCI] = 0; fvp_config[CONFIG_HAS_TZC] = 0; break; case HBI_FVP_BASE: midr_pn = (read_midr() >> MIDR_PN_SHIFT) & MIDR_PN_MASK; if ((midr_pn == MIDR_PN_A57) || (midr_pn == MIDR_PN_A53)) fvp_config[CONFIG_CPU_SETUP] = 1; else fvp_config[CONFIG_CPU_SETUP] = 0; fvp_config[CONFIG_MAX_AFF0] = 4; fvp_config[CONFIG_MAX_AFF1] = 2; fvp_config[CONFIG_BASE_MMAP] = 1; fvp_config[CONFIG_HAS_CCI] = 1; fvp_config[CONFIG_HAS_TZC] = 1; break; default: assert(0); } return 0; } unsigned long plat_get_ns_image_entrypoint(void) { return NS_IMAGE_OFFSET; } uint64_t plat_get_syscnt_freq(void) { uint64_t counter_base_frequency; /* Read the frequency from Frequency modes table */ counter_base_frequency = mmio_read_32(SYS_CNTCTL_BASE + CNTFID_OFF); /* The first entry of the frequency modes table must not be 0 */ assert(counter_base_frequency != 0); return counter_base_frequency; } void fvp_cci_setup(void) { unsigned long cci_setup; /* * Enable CCI-400 for this cluster. No need * for locks as no other cpu is active at the * moment */ cci_setup = fvp_get_cfgvar(CONFIG_HAS_CCI); if (cci_setup) cci_enable_coherency(read_mpidr()); } /******************************************************************************* * Set SPSR and secure state for BL32 image ******************************************************************************/ void fvp_set_bl32_ep_info(entry_point_info_t *bl32_ep_info) { SET_SECURITY_STATE(bl32_ep_info->h.attr, SECURE); /* * The Secure Payload Dispatcher service is responsible for * setting the SPSR prior to entry into the BL32 image. */ bl32_ep_info->spsr = 0; } /******************************************************************************* * Set SPSR and secure state for BL33 image ******************************************************************************/ void fvp_set_bl33_ep_info(entry_point_info_t *bl33_ep_info) { unsigned long el_status; unsigned int mode; /* Figure out what mode we enter the non-secure world in */ el_status = read_id_aa64pfr0_el1() >> ID_AA64PFR0_EL2_SHIFT; el_status &= ID_AA64PFR0_ELX_MASK; if (el_status) mode = MODE_EL2; else mode = MODE_EL1; /* * TODO: Consider the possibility of specifying the SPSR in * the FIP ToC and allowing the platform to have a say as * well. */ bl33_ep_info->spsr = SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS); SET_SECURITY_STATE(bl33_ep_info->h.attr, NON_SECURE); }