/* * Copyright (c) 2015, ARM Limited and Contributors. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * Redistributions of source code must retain the above copyright notice, this * list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * * Neither the name of ARM nor the names of its contributors may be used * to endorse or promote products derived from this software without specific * prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #include #include #include #include #include #include #include #include #include #include #include #include "css_scpi.h" #if ARM_RECOM_STATE_ID_ENC /* * The table storing the valid idle power states. Ensure that the * array entries are populated in ascending order of state-id to * enable us to use binary search during power state validation. * The table must be terminated by a NULL entry. */ const unsigned int arm_pm_idle_states[] = { /* State-id - 0x01 */ arm_make_pwrstate_lvl1(ARM_LOCAL_STATE_RUN, ARM_LOCAL_STATE_RET, ARM_PWR_LVL0, PSTATE_TYPE_STANDBY), /* State-id - 0x02 */ arm_make_pwrstate_lvl1(ARM_LOCAL_STATE_RUN, ARM_LOCAL_STATE_OFF, ARM_PWR_LVL0, PSTATE_TYPE_POWERDOWN), /* State-id - 0x22 */ arm_make_pwrstate_lvl1(ARM_LOCAL_STATE_OFF, ARM_LOCAL_STATE_OFF, ARM_PWR_LVL1, PSTATE_TYPE_POWERDOWN), 0, }; #endif /******************************************************************************* * Private function to program the mailbox for a cpu before it is released * from reset. ******************************************************************************/ static void css_program_mailbox(uintptr_t address) { uintptr_t *mailbox = (void *) TRUSTED_MAILBOX_BASE; *mailbox = address; flush_dcache_range((uintptr_t) mailbox, sizeof(*mailbox)); } /******************************************************************************* * Handler called when a power domain is about to be turned on. The * level and mpidr determine the affinity instance. ******************************************************************************/ int css_pwr_domain_on(u_register_t mpidr) { /* * SCP takes care of powering up parent power domains so we * only need to care about level 0 */ scpi_set_css_power_state(mpidr, scpi_power_on, scpi_power_on, scpi_power_on); return PSCI_E_SUCCESS; } /******************************************************************************* * Handler called when a power level has just been powered on after * being turned off earlier. The target_state encodes the low power state that * each level has woken up from. ******************************************************************************/ void css_pwr_domain_on_finish(const psci_power_state_t *target_state) { assert(target_state->pwr_domain_state[ARM_PWR_LVL0] == ARM_LOCAL_STATE_OFF); /* * Perform the common cluster specific operations i.e enable coherency * if this cluster was off. */ if (target_state->pwr_domain_state[ARM_PWR_LVL1] == ARM_LOCAL_STATE_OFF) cci_enable_snoop_dvm_reqs(MPIDR_AFFLVL1_VAL(read_mpidr_el1())); /* Enable the gic cpu interface */ arm_gic_cpuif_setup(); /* todo: Is this setup only needed after a cold boot? */ arm_gic_pcpu_distif_setup(); } /******************************************************************************* * Common function called while turning a cpu off or suspending it. It is called * from css_off() or css_suspend() when these functions in turn are called for * power domain at the highest power level which will be powered down. It * performs the actions common to the OFF and SUSPEND calls. ******************************************************************************/ static void css_power_down_common(const psci_power_state_t *target_state) { uint32_t cluster_state = scpi_power_on; /* Prevent interrupts from spuriously waking up this cpu */ arm_gic_cpuif_deactivate(); /* Cluster is to be turned off, so disable coherency */ if (target_state->pwr_domain_state[ARM_PWR_LVL1] == ARM_LOCAL_STATE_OFF) { cci_disable_snoop_dvm_reqs(MPIDR_AFFLVL1_VAL(read_mpidr())); cluster_state = scpi_power_off; } /* * Ask the SCP to power down the appropriate components depending upon * their state. */ scpi_set_css_power_state(read_mpidr_el1(), scpi_power_off, cluster_state, scpi_power_on); } /******************************************************************************* * Handler called when a power domain is about to be turned off. The * target_state encodes the power state that each level should transition to. ******************************************************************************/ static void css_pwr_domain_off(const psci_power_state_t *target_state) { assert(target_state->pwr_domain_state[ARM_PWR_LVL0] == ARM_LOCAL_STATE_OFF); css_power_down_common(target_state); } /******************************************************************************* * Handler called when a power domain is about to be suspended. The * target_state encodes the power state that each level should transition to. ******************************************************************************/ static void css_pwr_domain_suspend(const psci_power_state_t *target_state) { /* * Juno has retention only at cpu level. Just return * as nothing is to be done for retention. */ if (target_state->pwr_domain_state[ARM_PWR_LVL0] == ARM_LOCAL_STATE_RET) return; assert(target_state->pwr_domain_state[ARM_PWR_LVL0] == ARM_LOCAL_STATE_OFF); css_power_down_common(target_state); } /******************************************************************************* * Handler called when a power domain has just been powered on after * having been suspended earlier. The target_state encodes the low power state * that each level has woken up from. * TODO: At the moment we reuse the on finisher and reinitialize the secure * context. Need to implement a separate suspend finisher. ******************************************************************************/ static void css_pwr_domain_suspend_finish( const psci_power_state_t *target_state) { /* * Return as nothing is to be done on waking up from retention. */ if (target_state->pwr_domain_state[ARM_PWR_LVL0] == ARM_LOCAL_STATE_RET) return; css_pwr_domain_on_finish(target_state); } /******************************************************************************* * Handlers to shutdown/reboot the system ******************************************************************************/ static void __dead2 css_system_off(void) { uint32_t response; /* Send the power down request to the SCP */ response = scpi_sys_power_state(scpi_system_shutdown); if (response != SCP_OK) { ERROR("CSS System Off: SCP error %u.\n", response); panic(); } wfi(); ERROR("CSS System Off: operation not handled.\n"); panic(); } static void __dead2 css_system_reset(void) { uint32_t response; /* Send the system reset request to the SCP */ response = scpi_sys_power_state(scpi_system_reboot); if (response != SCP_OK) { ERROR("CSS System Reset: SCP error %u.\n", response); panic(); } wfi(); ERROR("CSS System Reset: operation not handled.\n"); panic(); } /******************************************************************************* * Handler called when the CPU power domain is about to enter standby. ******************************************************************************/ void css_cpu_standby(plat_local_state_t cpu_state) { unsigned int scr; assert(cpu_state == ARM_LOCAL_STATE_RET); scr = read_scr_el3(); /* Enable PhysicalIRQ bit for NS world to wake the CPU */ write_scr_el3(scr | SCR_IRQ_BIT); isb(); dsb(); wfi(); /* * Restore SCR to the original value, synchronisation of scr_el3 is * done by eret while el3_exit to save some execution cycles. */ write_scr_el3(scr); } /******************************************************************************* * Export the platform handlers to enable psci to invoke them ******************************************************************************/ static const plat_psci_ops_t css_ops = { .pwr_domain_on = css_pwr_domain_on, .pwr_domain_on_finish = css_pwr_domain_on_finish, .pwr_domain_off = css_pwr_domain_off, .cpu_standby = css_cpu_standby, .pwr_domain_suspend = css_pwr_domain_suspend, .pwr_domain_suspend_finish = css_pwr_domain_suspend_finish, .system_off = css_system_off, .system_reset = css_system_reset, .validate_power_state = arm_validate_power_state }; /******************************************************************************* * Export the platform specific psci ops. ******************************************************************************/ int plat_setup_psci_ops(uintptr_t sec_entrypoint, const plat_psci_ops_t **psci_ops) { *psci_ops = &css_ops; /* Setup mailbox with entry point. */ css_program_mailbox(sec_entrypoint); return 0; }