/* * Copyright (c) 2017-2018, ARM Limited and Contributors. All rights reserved. * * SPDX-License-Identifier: BSD-3-Clause */ #include #include #include #include #include #include #include #include #include #include #include #include #include "spm_private.h" #include "spm_shim_private.h" /* Setup context of the Secure Partition */ void spm_sp_setup(sp_context_t *sp_ctx) { cpu_context_t *ctx = &(sp_ctx->cpu_ctx); /* * Initialize CPU context * ---------------------- */ entry_point_info_t ep_info = {0}; SET_PARAM_HEAD(&ep_info, PARAM_EP, VERSION_1, SECURE | EP_ST_ENABLE); /* Setup entrypoint and SPSR */ ep_info.pc = sp_ctx->rd.attribute.entrypoint; ep_info.spsr = SPSR_64(MODE_EL0, MODE_SP_EL0, DISABLE_ALL_EXCEPTIONS); /* * X0: Unused (MBZ). * X1: Unused (MBZ). * X2: cookie value (Implementation Defined) * X3: cookie value (Implementation Defined) * X4 to X7 = 0 */ ep_info.args.arg0 = 0; ep_info.args.arg1 = 0; ep_info.args.arg2 = PLAT_SPM_COOKIE_0; ep_info.args.arg3 = PLAT_SPM_COOKIE_1; cm_setup_context(ctx, &ep_info); /* * Setup translation tables * ------------------------ */ /* This region contains the exception vectors used at S-EL1. */ const mmap_region_t sel1_exception_vectors = MAP_REGION_FLAT(SPM_SHIM_EXCEPTIONS_START, SPM_SHIM_EXCEPTIONS_SIZE, MT_CODE | MT_SECURE | MT_PRIVILEGED); mmap_add_region_ctx(sp_ctx->xlat_ctx_handle, &sel1_exception_vectors); mmap_add_ctx(sp_ctx->xlat_ctx_handle, plat_get_secure_partition_mmap(NULL)); init_xlat_tables_ctx(sp_ctx->xlat_ctx_handle); /* * MMU-related registers * --------------------- */ xlat_ctx_t *xlat_ctx = sp_ctx->xlat_ctx_handle; uint64_t mmu_cfg_params[MMU_CFG_PARAM_MAX]; setup_mmu_cfg((uint64_t *)&mmu_cfg_params, 0, xlat_ctx->base_table, xlat_ctx->pa_max_address, xlat_ctx->va_max_address, EL1_EL0_REGIME); write_ctx_reg(get_sysregs_ctx(ctx), CTX_MAIR_EL1, mmu_cfg_params[MMU_CFG_MAIR]); write_ctx_reg(get_sysregs_ctx(ctx), CTX_TCR_EL1, mmu_cfg_params[MMU_CFG_TCR]); write_ctx_reg(get_sysregs_ctx(ctx), CTX_TTBR0_EL1, mmu_cfg_params[MMU_CFG_TTBR0]); /* Setup SCTLR_EL1 */ u_register_t sctlr_el1 = read_ctx_reg(get_sysregs_ctx(ctx), CTX_SCTLR_EL1); sctlr_el1 |= /*SCTLR_EL1_RES1 |*/ /* Don't trap DC CVAU, DC CIVAC, DC CVAC, DC CVAP, or IC IVAU */ SCTLR_UCI_BIT | /* RW regions at xlat regime EL1&0 are forced to be XN. */ SCTLR_WXN_BIT | /* Don't trap to EL1 execution of WFI or WFE at EL0. */ SCTLR_NTWI_BIT | SCTLR_NTWE_BIT | /* Don't trap to EL1 accesses to CTR_EL0 from EL0. */ SCTLR_UCT_BIT | /* Don't trap to EL1 execution of DZ ZVA at EL0. */ SCTLR_DZE_BIT | /* Enable SP Alignment check for EL0 */ SCTLR_SA0_BIT | /* Allow cacheable data and instr. accesses to normal memory. */ SCTLR_C_BIT | SCTLR_I_BIT | /* Alignment fault checking enabled when at EL1 and EL0. */ SCTLR_A_BIT | /* Enable MMU. */ SCTLR_M_BIT ; sctlr_el1 &= ~( /* Explicit data accesses at EL0 are little-endian. */ SCTLR_E0E_BIT | /* Accesses to DAIF from EL0 are trapped to EL1. */ SCTLR_UMA_BIT ); write_ctx_reg(get_sysregs_ctx(ctx), CTX_SCTLR_EL1, sctlr_el1); /* * Setup other system registers * ---------------------------- */ /* Shim Exception Vector Base Address */ write_ctx_reg(get_sysregs_ctx(ctx), CTX_VBAR_EL1, SPM_SHIM_EXCEPTIONS_PTR); /* * FPEN: Allow the Secure Partition to access FP/SIMD registers. * Note that SPM will not do any saving/restoring of these registers on * behalf of the SP. This falls under the SP's responsibility. * TTA: Enable access to trace registers. * ZEN (v8.2): Trap SVE instructions and access to SVE registers. */ write_ctx_reg(get_sysregs_ctx(ctx), CTX_CPACR_EL1, CPACR_EL1_FPEN(CPACR_EL1_FP_TRAP_NONE)); }