/* * Copyright (c) 2016-2017, ARM Limited and Contributors. All rights reserved. * * SPDX-License-Identifier: BSD-3-Clause */ #include #include #include #include #include #include #include #include #include .globl sp_min_vector_table .globl sp_min_entrypoint .globl sp_min_warm_entrypoint .macro route_fiq_to_sp_min reg /* ----------------------------------------------------- * FIQs are secure interrupts trapped by Monitor and non * secure is not allowed to mask the FIQs. * ----------------------------------------------------- */ ldcopr \reg, SCR orr \reg, \reg, #SCR_FIQ_BIT bic \reg, \reg, #SCR_FW_BIT stcopr \reg, SCR .endm vector_base sp_min_vector_table b sp_min_entrypoint b plat_panic_handler /* Undef */ b handle_smc /* Syscall */ b plat_panic_handler /* Prefetch abort */ b plat_panic_handler /* Data abort */ b plat_panic_handler /* Reserved */ b plat_panic_handler /* IRQ */ b handle_fiq /* FIQ */ /* * The Cold boot/Reset entrypoint for SP_MIN */ func sp_min_entrypoint #if !RESET_TO_SP_MIN /* --------------------------------------------------------------- * Preceding bootloader has populated r0 with a pointer to a * 'bl_params_t' structure & r1 with a pointer to platform * specific structure * --------------------------------------------------------------- */ mov r11, r0 mov r12, r1 /* --------------------------------------------------------------------- * For !RESET_TO_SP_MIN systems, only the primary CPU ever reaches * sp_min_entrypoint() during the cold boot flow, so the cold/warm boot * and primary/secondary CPU logic should not be executed in this case. * * Also, assume that the previous bootloader has already initialised the * SCTLR, including the CPU endianness, and has initialised the memory. * --------------------------------------------------------------------- */ el3_entrypoint_common \ _init_sctlr=0 \ _warm_boot_mailbox=0 \ _secondary_cold_boot=0 \ _init_memory=0 \ _init_c_runtime=1 \ _exception_vectors=sp_min_vector_table /* --------------------------------------------------------------------- * Relay the previous bootloader's arguments to the platform layer * --------------------------------------------------------------------- */ mov r0, r11 mov r1, r12 #else /* --------------------------------------------------------------------- * For RESET_TO_SP_MIN systems which have a programmable reset address, * sp_min_entrypoint() is executed only on the cold boot path so we can * skip the warm boot mailbox mechanism. * --------------------------------------------------------------------- */ el3_entrypoint_common \ _init_sctlr=1 \ _warm_boot_mailbox=!PROGRAMMABLE_RESET_ADDRESS \ _secondary_cold_boot=!COLD_BOOT_SINGLE_CPU \ _init_memory=1 \ _init_c_runtime=1 \ _exception_vectors=sp_min_vector_table /* --------------------------------------------------------------------- * For RESET_TO_SP_MIN systems, BL32 (SP_MIN) is the first bootloader * to run so there's no argument to relay from a previous bootloader. * Zero the arguments passed to the platform layer to reflect that. * --------------------------------------------------------------------- */ mov r0, #0 mov r1, #0 #endif /* RESET_TO_SP_MIN */ #if SP_MIN_WITH_SECURE_FIQ route_fiq_to_sp_min r4 #endif bl sp_min_early_platform_setup bl sp_min_plat_arch_setup /* Jump to the main function */ bl sp_min_main /* ------------------------------------------------------------- * Clean the .data & .bss sections to main memory. This ensures * that any global data which was initialised by the primary CPU * is visible to secondary CPUs before they enable their data * caches and participate in coherency. * ------------------------------------------------------------- */ ldr r0, =__DATA_START__ ldr r1, =__DATA_END__ sub r1, r1, r0 bl clean_dcache_range ldr r0, =__BSS_START__ ldr r1, =__BSS_END__ sub r1, r1, r0 bl clean_dcache_range bl smc_get_next_ctx /* r0 points to `smc_ctx_t` */ /* The PSCI cpu_context registers have been copied to `smc_ctx_t` */ b sp_min_exit endfunc sp_min_entrypoint /* * SMC handling function for SP_MIN. */ func handle_smc /* On SMC entry, `sp` points to `smc_ctx_t`. Save `lr`. */ str lr, [sp, #SMC_CTX_LR_MON] smcc_save_gp_mode_regs /* * `sp` still points to `smc_ctx_t`. Save it to a register * and restore the C runtime stack pointer to `sp`. */ mov r2, sp /* handle */ ldr sp, [r2, #SMC_CTX_SP_MON] ldr r0, [r2, #SMC_CTX_SCR] and r3, r0, #SCR_NS_BIT /* flags */ /* Switch to Secure Mode*/ bic r0, #SCR_NS_BIT stcopr r0, SCR isb ldr r0, [r2, #SMC_CTX_GPREG_R0] /* smc_fid */ /* Check whether an SMC64 is issued */ tst r0, #(FUNCID_CC_MASK << FUNCID_CC_SHIFT) beq 1f /* SMC32 is not detected. Return error back to caller */ mov r0, #SMC_UNK str r0, [r2, #SMC_CTX_GPREG_R0] mov r0, r2 b sp_min_exit 1: /* SMC32 is detected */ mov r1, #0 /* cookie */ bl handle_runtime_svc /* `r0` points to `smc_ctx_t` */ b sp_min_exit endfunc handle_smc /* * Secure Interrupts handling function for SP_MIN. */ func handle_fiq #if !SP_MIN_WITH_SECURE_FIQ b plat_panic_handler #else /* FIQ has a +4 offset for lr compared to preferred return address */ sub lr, lr, #4 /* On SMC entry, `sp` points to `smc_ctx_t`. Save `lr`. */ str lr, [sp, #SMC_CTX_LR_MON] smcc_save_gp_mode_regs /* * AArch32 architectures need to clear the exclusive access when * entering Monitor mode. */ clrex /* load run-time stack */ mov r2, sp ldr sp, [r2, #SMC_CTX_SP_MON] /* Switch to Secure Mode */ ldr r0, [r2, #SMC_CTX_SCR] bic r0, #SCR_NS_BIT stcopr r0, SCR isb push {r2, r3} bl sp_min_fiq pop {r0, r3} b sp_min_exit #endif endfunc handle_fiq /* * The Warm boot entrypoint for SP_MIN. */ func sp_min_warm_entrypoint /* * On the warm boot path, most of the EL3 initialisations performed by * 'el3_entrypoint_common' must be skipped: * * - Only when the platform bypasses the BL1/BL32 (SP_MIN) entrypoint by * programming the reset address do we need to initialied the SCTLR. * In other cases, we assume this has been taken care by the * entrypoint code. * * - No need to determine the type of boot, we know it is a warm boot. * * - Do not try to distinguish between primary and secondary CPUs, this * notion only exists for a cold boot. * * - No need to initialise the memory or the C runtime environment, * it has been done once and for all on the cold boot path. */ el3_entrypoint_common \ _init_sctlr=PROGRAMMABLE_RESET_ADDRESS \ _warm_boot_mailbox=0 \ _secondary_cold_boot=0 \ _init_memory=0 \ _init_c_runtime=0 \ _exception_vectors=sp_min_vector_table /* * We're about to enable MMU and participate in PSCI state coordination. * * The PSCI implementation invokes platform routines that enable CPUs to * participate in coherency. On a system where CPUs are not * cache-coherent without appropriate platform specific programming, * having caches enabled until such time might lead to coherency issues * (resulting from stale data getting speculatively fetched, among * others). Therefore we keep data caches disabled even after enabling * the MMU for such platforms. * * On systems with hardware-assisted coherency, or on single cluster * platforms, such platform specific programming is not required to * enter coherency (as CPUs already are); and there's no reason to have * caches disabled either. */ mov r0, #DISABLE_DCACHE bl bl32_plat_enable_mmu #if SP_MIN_WITH_SECURE_FIQ route_fiq_to_sp_min r0 #endif #if HW_ASSISTED_COHERENCY || WARMBOOT_ENABLE_DCACHE_EARLY ldcopr r0, SCTLR orr r0, r0, #SCTLR_C_BIT stcopr r0, SCTLR isb #endif bl sp_min_warm_boot bl smc_get_next_ctx /* r0 points to `smc_ctx_t` */ /* The PSCI cpu_context registers have been copied to `smc_ctx_t` */ b sp_min_exit endfunc sp_min_warm_entrypoint /* * The function to restore the registers from SMC context and return * to the mode restored to SPSR. * * Arguments : r0 must point to the SMC context to restore from. */ func sp_min_exit monitor_exit endfunc sp_min_exit