ARM Trusted Firmware - version 0.3 ================================== New features ------------ * Support for Foundation FVP Version 2.0 added. The documented UEFI configuration disables some devices that are unavailable in the Foundation FVP, including MMC and CLCD. The resultant UEFI binary can be used on the AEMv8 and Cortex-A57-A53 Base FVPs, as well as the Foundation FVP. NOTE: The software will not work on Version 1.0 of the Foundation FVP. * Enabled third party contributions. Added a new contributing.md containing instructions for how to contribute and updated copyright text in all files to acknowledge contributors. * The PSCI CPU_SUSPEND API has been stabilised to the extent where it can be used for entry into power down states with the following restrictions: - Entry into standby states is not supported. - The API is only supported on the AEMv8 and Cortex-A57-A53 Base FVPs. * The PSCI AFFINITY_INFO api has undergone limited testing on the Base FVPs to allow experimental use. * Required C library and runtime header files are now included locally in ARM Trusted Firmware instead of depending on the toolchain standard include paths. The local implementation has been cleaned up and reduced in scope. * Added I/O abstraction framework, primarily to allow generic code to load images in a platform-independent way. The existing image loading code has been reworked to use the new framework. Semi-hosting and NOR flash I/O drivers are provided. * Introduced Firmware Image Package (FIP) handling code and tools. A FIP combines multiple firmware images with a Table of Contents (ToC) into a single binary image. The new FIP driver is another type of I/O driver. The Makefile builds a FIP by default and the FVP platform code expect to load a FIP from NOR flash, although some support for image loading using semi- hosting is retained. NOTE: Building a FIP by default is a non-backwards-compatible change. NOTE: Generic BL2 code now loads a BL3-3 (non-trusted firmware) image into DRAM instead of expecting this to be pre-loaded at known location. This is also a non-backwards-compatible change. NOTE: Some non-trusted firmware (e.g. UEFI) will need to be rebuilt so that it knows the new location to execute from and no longer needs to copy particular code modules to DRAM itself. * Reworked BL2 to BL3-1 handover interface. A new composite structure (bl31_args) holds the superset of information that needs to be passed from BL2 to BL3-1, including information on how handover execution control to BL3-2 (if present) and BL3-3 (non-trusted firmware). * Added library support for CPU context management, allowing the saving and restoring of - Shared system registers between Secure-EL1 and EL1. - VFP registers. - Essential EL3 system registers. * Added a framework for implementing EL3 runtime services. Reworked the PSCI implementation to be one such runtime service. * Reworked the exception handling logic, making use of both SP_EL0 and SP_EL3 stack pointers for determining the type of exception, managing general purpose and system register context on exception entry/exit, and handling SMCs. SMCs are directed to the correct EL3 runtime service. * Added support for a Test Secure-EL1 Payload (TSP) and a corresponding Dispatcher (TSPD), which is loaded as an EL3 runtime service. The TSPD implements Secure Monitor functionality such as world switching and EL1 context management, and is responsible for communication with the TSP. NOTE: The TSPD does not yet contain support for secure world interrupts. NOTE: The TSP/TSPD is not built by default. Issues resolved since last release ---------------------------------- * Support has been added for switching context between secure and normal worlds in EL3. * PSCI API calls `AFFINITY_INFO` & `PSCI_VERSION` have now been tested (to a limited extent). * The ARM Trusted Firmware build artifacts are now placed in the `./build` directory and sub-directories instead of being placed in the root of the project. * The ARM Trusted Firmware is now free from build warnings. Build warnings are now treated as errors. * The ARM Trusted Firmware now provides C library support locally within the project to maintain compatibility between toolchains/systems. * The PSCI locking code has been reworked so it no longer takes locks in an incorrect sequence. * The RAM-disk method of loading a Linux file-system has been confirmed to work with the ARM Trusted Firmware and Linux kernel version (based on version 3.13) used in this release, for both Foundation and Base FVPs. Known issues ------------ The following is a list of issues which are expected to be fixed in the future releases of the ARM Trusted Firmware. * The TrustZone Address Space Controller (TZC-400) is not being programmed yet. Use of model parameter `-C bp.secure_memory=1` is not supported. * No support yet for secure world interrupt handling. * GICv3 support is experimental. The Linux kernel patches to support this are not widely available. There are known issues with GICv3 initialization in the ARM Trusted Firmware. * Dynamic image loading is not available yet. The current image loader implementation (used to load BL2 and all subsequent images) has some limitations. Changing BL2 or BL3-1 load addresses in certain ways can lead to loading errors, even if the images should theoretically fit in memory. * The ARM Trusted Firmware uses too much on-chip Trusted SRAM. Currently the Test Secure-EL1 Payload (BL3-2) executes in Trusted DRAM since there is not enough SRAM. A number of RAM usage enhancements have been identified to rectify this situation. * CPU idle does not work on the advertised version of the Foundation FVP. Some FVP fixes are required that are not available externally at the time of writing. * Various bugs in ARM Trusted Firmware, UEFI and the Linux kernel have been observed when using Linaro toolchain versions later than 13.11. Although most of these have been fixed, some remain at the time of writing. These mainly seem to relate to a subtle change in the way the compiler converts between 64-bit and 32-bit values (e.g. during casting operations), which reveals previously hidden bugs in client code. * The tested filesystem used for this release (Linaro AArch64 OpenEmbedded 14.01) does not report progress correctly in the console. It only seems to produce error output, not standard output. It otherwise appears to function correctly. Other filesystem versions on the same software stack do not exhibit the problem. * The Makefile structure doesn't make it easy to separate out parts of the Trusted Firmware for re-use in platform ports, for example if only BL3-1 is required in a platform port. Also, dependency checking in the Makefile is flawed. * The firmware design documentation for the Test Secure-EL1 Payload (TSP) and its dispatcher (TSPD) is incomplete. Similarly for the PSCI section. ARM Trusted Firmware - version 0.2 ================================== New features ------------ * First source release. * Code for the PSCI suspend feature is supplied, although this is not enabled by default since there are known issues (see below). Issues resolved since last release ---------------------------------- * The "psci" nodes in the FDTs provided in this release now fully comply with the recommendations made in the PSCI specification. Known issues ------------ The following is a list of issues which are expected to be fixed in the future releases of the ARM Trusted Firmware. * The TrustZone Address Space Controller (TZC-400) is not being programmed yet. Use of model parameter `-C bp.secure_memory=1` is not supported. * No support yet for secure world interrupt handling or for switching context between secure and normal worlds in EL3. * GICv3 support is experimental. The Linux kernel patches to support this are not widely available. There are known issues with GICv3 initialization in the ARM Trusted Firmware. * Dynamic image loading is not available yet. The current image loader implementation (used to load BL2 and all subsequent images) has some limitations. Changing BL2 or BL3-1 load addresses in certain ways can lead to loading errors, even if the images should theoretically fit in memory. * Although support for PSCI `CPU_SUSPEND` is present, it is not yet stable and ready for use. * PSCI API calls `AFFINITY_INFO` & `PSCI_VERSION` are implemented but have not been tested. * The ARM Trusted Firmware make files result in all build artifacts being placed in the root of the project. These should be placed in appropriate sub-directories. * The compilation of ARM Trusted Firmware is not free from compilation warnings. Some of these warnings have not been investigated yet so they could mask real bugs. * The ARM Trusted Firmware currently uses toolchain/system include files like stdio.h. It should provide versions of these within the project to maintain compatibility between toolchains/systems. * The PSCI code takes some locks in an incorrect sequence. This may cause problems with suspend and hotplug in certain conditions. * The Linux kernel used in this release is based on version 3.12-rc4. Using this kernel with the ARM Trusted Firmware fails to start the file-system as a RAM-disk. It fails to execute user-space `init` from the RAM-disk. As an alternative, the VirtioBlock mechanism can be used to provide a file-system to the kernel. - - - - - - - - - - - - - - - - - - - - - - - - - - _Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved._