/* * Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved. * * SPDX-License-Identifier: BSD-3-Clause */ #ifndef __PLATFORM_DEF_H__ #define __PLATFORM_DEF_H__ #include #include #include #include #include "../rpi3_hw.h" /* Special value used to verify platform parameters from BL2 to BL31 */ #define RPI3_BL31_PLAT_PARAM_VAL ULL(0x0F1E2D3C4B5A6978) #define PLATFORM_STACK_SIZE ULL(0x1000) #define PLATFORM_MAX_CPUS_PER_CLUSTER U(4) #define PLATFORM_CLUSTER_COUNT U(1) #define PLATFORM_CLUSTER0_CORE_COUNT PLATFORM_MAX_CPUS_PER_CLUSTER #define PLATFORM_CORE_COUNT PLATFORM_CLUSTER0_CORE_COUNT #define RPI3_PRIMARY_CPU U(0) #define PLAT_MAX_PWR_LVL MPIDR_AFFLVL1 #define PLAT_NUM_PWR_DOMAINS (PLATFORM_CLUSTER_COUNT + \ PLATFORM_CORE_COUNT) #define PLAT_MAX_RET_STATE U(1) #define PLAT_MAX_OFF_STATE U(2) /* Local power state for power domains in Run state. */ #define PLAT_LOCAL_STATE_RUN U(0) /* Local power state for retention. Valid only for CPU power domains */ #define PLAT_LOCAL_STATE_RET U(1) /* * Local power state for OFF/power-down. Valid for CPU and cluster power * domains. */ #define PLAT_LOCAL_STATE_OFF U(2) /* * Macros used to parse state information from State-ID if it is using the * recommended encoding for State-ID. */ #define PLAT_LOCAL_PSTATE_WIDTH U(4) #define PLAT_LOCAL_PSTATE_MASK ((U(1) << PLAT_LOCAL_PSTATE_WIDTH) - 1) /* * Some data must be aligned on the biggest cache line size in the platform. * This is known only to the platform as it might have a combination of * integrated and external caches. */ #define CACHE_WRITEBACK_SHIFT U(6) #define CACHE_WRITEBACK_GRANULE (U(1) << CACHE_WRITEBACK_SHIFT) /* * Partition memory into secure ROM, non-secure DRAM, secure "SRAM", and * secure DRAM. Note that this is all actually DRAM with different names, * there is no Secure RAM in the Raspberry Pi 3. */ #define SEC_ROM_BASE ULL(0x00000000) #define SEC_ROM_SIZE ULL(0x00020000) /* FIP placed after ROM to append it to BL1 with very little padding. */ #define PLAT_RPI3_FIP_BASE ULL(0x00020000) #define PLAT_RPI3_FIP_MAX_SIZE ULL(0x001E0000) /* We have 16M of memory reserved at at 256M */ #define SEC_SRAM_BASE ULL(0x10000000) #define SEC_SRAM_SIZE ULL(0x00100000) #define SEC_DRAM0_BASE ULL(0x10100000) #define SEC_DRAM0_SIZE ULL(0x00200000) #define NS_DRAM0_BASE ULL(0x10300000) #define NS_DRAM0_SIZE ULL(0x00D00000) /* End of reserved memory */ /* * BL33 entrypoint. */ #define PLAT_RPI3_NS_IMAGE_OFFSET NS_DRAM0_BASE #define PLAT_RPI3_NS_IMAGE_MAX_SIZE NS_DRAM0_SIZE /* * I/O registers. */ #define DEVICE0_BASE RPI3_IO_BASE #define DEVICE0_SIZE RPI3_IO_SIZE /* * Arm TF lives in SRAM, partition it here */ #define SHARED_RAM_BASE SEC_SRAM_BASE #define SHARED_RAM_SIZE ULL(0x00001000) #define BL_RAM_BASE (SHARED_RAM_BASE + SHARED_RAM_SIZE) #define BL_RAM_SIZE (SEC_SRAM_SIZE - SHARED_RAM_SIZE) /* * Mailbox to control the secondary cores.All secondary cores are held in a wait * loop in cold boot. To release them perform the following steps (plus any * additional barriers that may be needed): * * uint64_t *entrypoint = (uint64_t *)PLAT_RPI3_TM_ENTRYPOINT; * *entrypoint = ADDRESS_TO_JUMP_TO; * * uint64_t *mbox_entry = (uint64_t *)PLAT_RPI3_TM_HOLD_BASE; * mbox_entry[cpu_id] = PLAT_RPI3_TM_HOLD_STATE_GO; * * sev(); */ #define PLAT_RPI3_TRUSTED_MAILBOX_BASE SHARED_RAM_BASE #define PLAT_RPI3_TM_ENTRYPOINT PLAT_RPI3_TRUSTED_MAILBOX_BASE #define PLAT_RPI3_TM_ENTRYPOINT_SIZE ULL(8) #define PLAT_RPI3_TM_HOLD_BASE (PLAT_RPI3_TM_ENTRYPOINT + \ PLAT_RPI3_TM_ENTRYPOINT_SIZE) #define PLAT_RPI3_TM_HOLD_ENTRY_SIZE ULL(8) #define PLAT_RPI3_TM_HOLD_SIZE (PLAT_RPI3_TM_HOLD_ENTRY_SIZE * \ PLATFORM_CORE_COUNT) #define PLAT_RPI3_TRUSTED_MAILBOX_SIZE (PLAT_RPI3_TM_ENTRYPOINT_SIZE + \ PLAT_RPI3_TM_HOLD_SIZE) #define PLAT_RPI3_TM_HOLD_STATE_WAIT ULL(0) #define PLAT_RPI3_TM_HOLD_STATE_GO ULL(1) /* * BL1 specific defines. * * BL1 RW data is relocated from ROM to RAM at runtime so we need 2 sets of * addresses. * * Put BL1 RW at the top of the Secure SRAM. BL1_RW_BASE is calculated using * the current BL1 RW debug size plus a little space for growth. */ #define PLAT_MAX_BL1_RW_SIZE ULL(0x12000) #define BL1_RO_BASE SEC_ROM_BASE #define BL1_RO_LIMIT (SEC_ROM_BASE + SEC_ROM_SIZE) #define BL1_RW_BASE (BL1_RW_LIMIT - PLAT_MAX_BL1_RW_SIZE) #define BL1_RW_LIMIT (BL_RAM_BASE + BL_RAM_SIZE) /* * BL2 specific defines. * * Put BL2 just below BL31. BL2_BASE is calculated using the current BL2 debug * size plus a little space for growth. */ #define PLAT_MAX_BL2_SIZE ULL(0x2C000) #define BL2_BASE (BL2_LIMIT - PLAT_MAX_BL2_SIZE) #define BL2_LIMIT BL31_BASE /* * BL31 specific defines. * * Put BL31 at the top of the Trusted SRAM. BL31_BASE is calculated using the * current BL31 debug size plus a little space for growth. */ #define PLAT_MAX_BL31_SIZE ULL(0x20000) #define BL31_BASE (BL31_LIMIT - PLAT_MAX_BL31_SIZE) #define BL31_LIMIT (BL_RAM_BASE + BL_RAM_SIZE) #define BL31_PROGBITS_LIMIT BL1_RW_BASE /* * BL32 specific defines. * * BL32 can execute from Secure SRAM or Secure DRAM. */ #define BL32_SRAM_BASE BL_RAM_BASE #define BL32_SRAM_LIMIT BL31_BASE #define BL32_DRAM_BASE SEC_DRAM0_BASE #define BL32_DRAM_LIMIT (SEC_DRAM0_BASE + SEC_DRAM0_SIZE) #ifdef SPD_opteed /* Load pageable part of OP-TEE at end of allocated DRAM space for BL32 */ #define RPI3_OPTEE_PAGEABLE_LOAD_SIZE 0x080000 /* 512KB */ #define RPI3_OPTEE_PAGEABLE_LOAD_BASE (BL32_DRAM_LIMIT - \ RPI3_OPTEE_PAGEABLE_LOAD_SIZE) #endif #define SEC_SRAM_ID 0 #define SEC_DRAM_ID 1 #if RPI3_BL32_RAM_LOCATION_ID == SEC_SRAM_ID # define BL32_MEM_BASE BL_RAM_BASE # define BL32_MEM_SIZE BL_RAM_SIZE # define BL32_BASE BL32_SRAM_BASE # define BL32_LIMIT BL32_SRAM_LIMIT #elif RPI3_BL32_RAM_LOCATION_ID == SEC_DRAM_ID # define BL32_MEM_BASE SEC_DRAM0_BASE # define BL32_MEM_SIZE SEC_DRAM0_SIZE # define BL32_BASE BL32_DRAM_BASE # define BL32_LIMIT BL32_DRAM_LIMIT #else # error "Unsupported RPI3_BL32_RAM_LOCATION_ID value" #endif #define BL32_SIZE (BL32_LIMIT - BL32_BASE) #ifdef SPD_none #undef BL32_BASE #endif /* SPD_none */ /* * Other memory-related defines. */ #define ADDR_SPACE_SIZE (ULL(1) << 32) #define MAX_MMAP_REGIONS U(8) #define MAX_XLAT_TABLES U(4) #define MAX_IO_DEVICES U(3) #define MAX_IO_HANDLES U(4) /* * Serial-related constants. */ #define PLAT_RPI3_UART_BASE RPI3_MINI_UART_BASE #define PLAT_RPI3_UART_CLK_IN_HZ RPI3_MINI_UART_CLK_IN_HZ #define PLAT_RPI3_UART_BAUDRATE ULL(115200) /* * System counter */ #define SYS_COUNTER_FREQ_IN_TICKS ULL(19200000) #endif /* __PLATFORM_DEF_H__ */