/* * Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * Redistributions of source code must retain the above copyright notice, this * list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * * Neither the name of ARM nor the names of its contributors may be used * to endorse or promote products derived from this software without specific * prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #include #include #include #include #include #include #include #include #include #include "drivers/pwrc/fvp_pwrc.h" /******************************************************************************* * Declarations of linker defined symbols which will help us find the layout * of trusted SRAM ******************************************************************************/ extern unsigned long __RO_START__; extern unsigned long __RO_END__; extern unsigned long __COHERENT_RAM_START__; extern unsigned long __COHERENT_RAM_END__; /* * The next 2 constants identify the extents of the code & RO data region. * These addresses are used by the MMU setup code and therefore they must be * page-aligned. It is the responsibility of the linker script to ensure that * __RO_START__ and __RO_END__ linker symbols refer to page-aligned addresses. */ #define BL31_RO_BASE (unsigned long)(&__RO_START__) #define BL31_RO_LIMIT (unsigned long)(&__RO_END__) /* * The next 2 constants identify the extents of the coherent memory region. * These addresses are used by the MMU setup code and therefore they must be * page-aligned. It is the responsibility of the linker script to ensure that * __COHERENT_RAM_START__ and __COHERENT_RAM_END__ linker symbols * refer to page-aligned addresses. */ #define BL31_COHERENT_RAM_BASE (unsigned long)(&__COHERENT_RAM_START__) #define BL31_COHERENT_RAM_LIMIT (unsigned long)(&__COHERENT_RAM_END__) #if RESET_TO_BL31 static entry_point_info_t bl32_entrypoint_info; static entry_point_info_t bl33_entrypoint_info; #else /******************************************************************************* * Reference to structure which holds the arguments that have been passed to * BL31 from BL2. ******************************************************************************/ static bl31_params_t *bl2_to_bl31_params; #endif /******************************************************************************* * Return a pointer to the 'entry_point_info' structure of the next image for the * security state specified. BL33 corresponds to the non-secure image type * while BL32 corresponds to the secure image type. A NULL pointer is returned * if the image does not exist. ******************************************************************************/ entry_point_info_t *bl31_get_next_image_info(uint32_t type) { entry_point_info_t *next_image_info; #if RESET_TO_BL31 if (type == NON_SECURE) plat_get_entry_point_info(NON_SECURE, &bl33_entrypoint_info); else plat_get_entry_point_info(SECURE, &bl32_entrypoint_info); next_image_info = (type == NON_SECURE) ? &bl33_entrypoint_info : &bl32_entrypoint_info; #else next_image_info = (type == NON_SECURE) ? bl2_to_bl31_params->bl33_ep_info : bl2_to_bl31_params->bl32_ep_info; #endif /* None of the images on this platform can have 0x0 as the entrypoint */ if (next_image_info->pc) return next_image_info; else return NULL; } /******************************************************************************* * Perform any BL31 specific platform actions. Here is an opportunity to copy * parameters passed by the calling EL (S-EL1 in BL2 & S-EL3 in BL1) before they * are lost (potentially). This needs to be done before the MMU is initialized * so that the memory layout can be used while creating page tables. On the FVP * we know that BL2 has populated the parameters in secure DRAM. So we just use * the reference passed in 'from_bl2' instead of copying. The 'data' parameter * is not used since all the information is contained in 'from_bl2'. Also, BL2 * has flushed this information to memory, so we are guaranteed to pick up good * data ******************************************************************************/ void bl31_early_platform_setup(bl31_params_t *from_bl2, void *plat_params_from_bl2) { /* Initialize the console to provide early debug support */ console_init(PL011_UART0_BASE); /* Initialize the platform config for future decision making */ platform_config_setup(); #if RESET_TO_BL31 /* There are no parameters from BL2 if BL31 is a reset vector */ assert(from_bl2 == NULL); assert(plat_params_from_bl2 == NULL); /* * Do initial security configuration to allow DRAM/device access. On * Base FVP only DRAM security is programmable (via TrustZone), but * other platforms might have more programmable security devices * present. */ plat_security_setup(); #else /* Check params passed from BL2 should not be NULL, * We are not checking plat_params_from_bl2 as NULL as we are not * using it on FVP */ assert(from_bl2 != NULL); assert(from_bl2->h.type == PARAM_BL31); assert(from_bl2->h.version >= VERSION_1); bl2_to_bl31_params = from_bl2; #endif } /******************************************************************************* * Initialize the gic, configure the CLCD and zero out variables needed by the * secondaries to boot up correctly. ******************************************************************************/ void bl31_platform_setup() { unsigned int reg_val; /* Initialize the gic cpu and distributor interfaces */ gic_setup(); /* * TODO: Configure the CLCD before handing control to * linux. Need to see if a separate driver is needed * instead. */ mmio_write_32(VE_SYSREGS_BASE + V2M_SYS_CFGDATA, 0); mmio_write_32(VE_SYSREGS_BASE + V2M_SYS_CFGCTRL, (1ull << 31) | (1 << 30) | (7 << 20) | (0 << 16)); /* Enable and initialize the System level generic timer */ mmio_write_32(SYS_CNTCTL_BASE + CNTCR_OFF, CNTCR_FCREQ(0) | CNTCR_EN); /* Allow access to the System counter timer module */ reg_val = (1 << CNTACR_RPCT_SHIFT) | (1 << CNTACR_RVCT_SHIFT); reg_val |= (1 << CNTACR_RFRQ_SHIFT) | (1 << CNTACR_RVOFF_SHIFT); reg_val |= (1 << CNTACR_RWVT_SHIFT) | (1 << CNTACR_RWPT_SHIFT); mmio_write_32(SYS_TIMCTL_BASE + CNTACR_BASE(0), reg_val); mmio_write_32(SYS_TIMCTL_BASE + CNTACR_BASE(1), reg_val); reg_val = (1 << CNTNSAR_NS_SHIFT(0)) | (1 << CNTNSAR_NS_SHIFT(1)); mmio_write_32(SYS_TIMCTL_BASE + CNTNSAR, reg_val); /* Intialize the power controller */ fvp_pwrc_setup(); /* Topologies are best known to the platform. */ plat_setup_topology(); } /******************************************************************************* * Perform the very early platform specific architectural setup here. At the * moment this is only intializes the mmu in a quick and dirty way. ******************************************************************************/ void bl31_plat_arch_setup() { #if RESET_TO_BL31 fvp_cci_setup(); #endif configure_mmu_el3(TZRAM_BASE, TZRAM_SIZE, BL31_RO_BASE, BL31_RO_LIMIT, BL31_COHERENT_RAM_BASE, BL31_COHERENT_RAM_LIMIT); } #if RESET_TO_BL31 /******************************************************************************* * Generate the entry point info for Non Secure and Secure images * for transferring control from BL31 ******************************************************************************/ void plat_get_entry_point_info(unsigned long target_security, entry_point_info_t *target_entry_info) { if (target_security == NON_SECURE) { SET_PARAM_HEAD(target_entry_info, PARAM_EP, VERSION_1, 0); /* * Tell BL31 where the non-trusted software image * is located and the entry state information */ target_entry_info->pc = plat_get_ns_image_entrypoint(); fvp_set_bl33_ep_info(target_entry_info); } else { SET_PARAM_HEAD(target_entry_info, PARAM_EP, VERSION_1, 0); if (BL32_BASE != 0) { /* Hard coding entry point to the base of the BL32 */ target_entry_info->pc = BL32_BASE; fvp_set_bl32_ep_info(target_entry_info); } } } #endif