/* * Copyright (C) 2018 Marvell International Ltd. * * SPDX-License-Identifier: BSD-3-Clause * https://spdx.org/licenses */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define MVEBU_PRIVATE_UID_REG 0x30 #define MVEBU_RFU_GLOBL_SW_RST 0x84 #define MVEBU_CCU_RVBAR(cpu) (MVEBU_REGS_BASE + 0x640 + (cpu * 4)) #define MVEBU_CCU_CPU_UN_RESET(cpu) (MVEBU_REGS_BASE + 0x650 + (cpu * 4)) #define MPIDR_CPU_GET(mpidr) ((mpidr) & MPIDR_CPU_MASK) #define MPIDR_CLUSTER_GET(mpidr) MPIDR_AFFLVL1_VAL((mpidr)) #define MVEBU_GPIO_MASK(index) (1 << (index % 32)) #define MVEBU_MPP_MASK(index) (0xF << (4 * (index % 8))) #define MVEBU_GPIO_VALUE(index, value) (value << (index % 32)) #define MVEBU_USER_CMD_0_REG (MVEBU_DRAM_MAC_BASE + 0x20) #define MVEBU_USER_CMD_CH0_OFFSET 28 #define MVEBU_USER_CMD_CH0_MASK (1 << MVEBU_USER_CMD_CH0_OFFSET) #define MVEBU_USER_CMD_CH0_EN (1 << MVEBU_USER_CMD_CH0_OFFSET) #define MVEBU_USER_CMD_CS_OFFSET 24 #define MVEBU_USER_CMD_CS_MASK (0xF << MVEBU_USER_CMD_CS_OFFSET) #define MVEBU_USER_CMD_CS_ALL (0xF << MVEBU_USER_CMD_CS_OFFSET) #define MVEBU_USER_CMD_SR_OFFSET 6 #define MVEBU_USER_CMD_SR_MASK (0x3 << MVEBU_USER_CMD_SR_OFFSET) #define MVEBU_USER_CMD_SR_ENTER (0x1 << MVEBU_USER_CMD_SR_OFFSET) #define MVEBU_MC_PWR_CTRL_REG (MVEBU_DRAM_MAC_BASE + 0x54) #define MVEBU_MC_AC_ON_DLY_OFFSET 8 #define MVEBU_MC_AC_ON_DLY_MASK (0xF << MVEBU_MC_AC_ON_DLY_OFFSET) #define MVEBU_MC_AC_ON_DLY_DEF_VAR (8 << MVEBU_MC_AC_ON_DLY_OFFSET) #define MVEBU_MC_AC_OFF_DLY_OFFSET 4 #define MVEBU_MC_AC_OFF_DLY_MASK (0xF << MVEBU_MC_AC_OFF_DLY_OFFSET) #define MVEBU_MC_AC_OFF_DLY_DEF_VAR (0xC << MVEBU_MC_AC_OFF_DLY_OFFSET) #define MVEBU_MC_PHY_AUTO_OFF_OFFSET 0 #define MVEBU_MC_PHY_AUTO_OFF_MASK (1 << MVEBU_MC_PHY_AUTO_OFF_OFFSET) #define MVEBU_MC_PHY_AUTO_OFF_EN (1 << MVEBU_MC_PHY_AUTO_OFF_OFFSET) /* this lock synchronize AP multiple cores execution with MSS */ DEFINE_BAKERY_LOCK(pm_sys_lock); /* Weak definitions may be overridden in specific board */ #pragma weak plat_marvell_get_pm_cfg /* AP806 CPU power down /power up definitions */ enum CPU_ID { CPU0, CPU1, CPU2, CPU3 }; #define REG_WR_VALIDATE_TIMEOUT (2000) #define FEATURE_DISABLE_STATUS_REG \ (MVEBU_REGS_BASE + 0x6F8230) #define FEATURE_DISABLE_STATUS_CPU_CLUSTER_OFFSET 4 #define FEATURE_DISABLE_STATUS_CPU_CLUSTER_MASK \ (0x1 << FEATURE_DISABLE_STATUS_CPU_CLUSTER_OFFSET) #ifdef MVEBU_SOC_AP807 #define PWRC_CPUN_CR_PWR_DN_RQ_OFFSET 1 #define PWRC_CPUN_CR_LDO_BYPASS_RDY_OFFSET 0 #else #define PWRC_CPUN_CR_PWR_DN_RQ_OFFSET 0 #define PWRC_CPUN_CR_LDO_BYPASS_RDY_OFFSET 31 #endif #define PWRC_CPUN_CR_REG(cpu_id) \ (MVEBU_REGS_BASE + 0x680000 + (cpu_id * 0x10)) #define PWRC_CPUN_CR_PWR_DN_RQ_MASK \ (0x1 << PWRC_CPUN_CR_PWR_DN_RQ_OFFSET) #define PWRC_CPUN_CR_ISO_ENABLE_OFFSET 16 #define PWRC_CPUN_CR_ISO_ENABLE_MASK \ (0x1 << PWRC_CPUN_CR_ISO_ENABLE_OFFSET) #define PWRC_CPUN_CR_LDO_BYPASS_RDY_MASK \ (0x1 << PWRC_CPUN_CR_LDO_BYPASS_RDY_OFFSET) #define CCU_B_PRCRN_REG(cpu_id) \ (MVEBU_REGS_BASE + 0x1A50 + \ ((cpu_id / 2) * (0x400)) + ((cpu_id % 2) * 4)) #define CCU_B_PRCRN_CPUPORESET_STATIC_OFFSET 0 #define CCU_B_PRCRN_CPUPORESET_STATIC_MASK \ (0x1 << CCU_B_PRCRN_CPUPORESET_STATIC_OFFSET) /* power switch fingers */ #define AP807_PWRC_LDO_CR0_REG \ (MVEBU_REGS_BASE + 0x680000 + 0x100) #define AP807_PWRC_LDO_CR0_OFFSET 16 #define AP807_PWRC_LDO_CR0_MASK \ (0xff << AP807_PWRC_LDO_CR0_OFFSET) #define AP807_PWRC_LDO_CR0_VAL 0xfd /* * Power down CPU: * Used to reduce power consumption, and avoid SoC unnecessary temperature rise. */ static int plat_marvell_cpu_powerdown(int cpu_id) { uint32_t reg_val; int exit_loop = REG_WR_VALIDATE_TIMEOUT; INFO("Powering down CPU%d\n", cpu_id); /* 1. Isolation enable */ reg_val = mmio_read_32(PWRC_CPUN_CR_REG(cpu_id)); reg_val |= 0x1 << PWRC_CPUN_CR_ISO_ENABLE_OFFSET; mmio_write_32(PWRC_CPUN_CR_REG(cpu_id), reg_val); /* 2. Read and check Isolation enabled - verify bit set to 1 */ do { reg_val = mmio_read_32(PWRC_CPUN_CR_REG(cpu_id)); exit_loop--; } while (!(reg_val & (0x1 << PWRC_CPUN_CR_ISO_ENABLE_OFFSET)) && exit_loop > 0); /* 3. Switch off CPU power */ reg_val = mmio_read_32(PWRC_CPUN_CR_REG(cpu_id)); reg_val &= ~PWRC_CPUN_CR_PWR_DN_RQ_MASK; mmio_write_32(PWRC_CPUN_CR_REG(cpu_id), reg_val); /* 4. Read and check Switch Off - verify bit set to 0 */ exit_loop = REG_WR_VALIDATE_TIMEOUT; do { reg_val = mmio_read_32(PWRC_CPUN_CR_REG(cpu_id)); exit_loop--; } while (reg_val & PWRC_CPUN_CR_PWR_DN_RQ_MASK && exit_loop > 0); if (exit_loop <= 0) goto cpu_poweroff_error; /* 5. De-Assert power ready */ reg_val = mmio_read_32(PWRC_CPUN_CR_REG(cpu_id)); reg_val &= ~PWRC_CPUN_CR_LDO_BYPASS_RDY_MASK; mmio_write_32(PWRC_CPUN_CR_REG(cpu_id), reg_val); /* 6. Assert CPU POR reset */ reg_val = mmio_read_32(CCU_B_PRCRN_REG(cpu_id)); reg_val &= ~CCU_B_PRCRN_CPUPORESET_STATIC_MASK; mmio_write_32(CCU_B_PRCRN_REG(cpu_id), reg_val); /* 7. Read and poll on Validate the CPU is out of reset */ exit_loop = REG_WR_VALIDATE_TIMEOUT; do { reg_val = mmio_read_32(CCU_B_PRCRN_REG(cpu_id)); exit_loop--; } while (reg_val & CCU_B_PRCRN_CPUPORESET_STATIC_MASK && exit_loop > 0); if (exit_loop <= 0) goto cpu_poweroff_error; INFO("Successfully powered down CPU%d\n", cpu_id); return 0; cpu_poweroff_error: ERROR("ERROR: Can't power down CPU%d\n", cpu_id); return -1; } /* * Power down CPUs 1-3 at early boot stage, * to reduce power consumption and SoC temperature. * This is triggered by BLE prior to DDR initialization. * * Note: * All CPUs will be powered up by plat_marvell_cpu_powerup on Linux boot stage, * which is triggered by PSCI ops (pwr_domain_on). */ int plat_marvell_early_cpu_powerdown(void) { uint32_t cpu_cluster_status = mmio_read_32(FEATURE_DISABLE_STATUS_REG) & FEATURE_DISABLE_STATUS_CPU_CLUSTER_MASK; /* if cpu_cluster_status bit is set, * that means we have only single cluster */ int cluster_count = cpu_cluster_status ? 1 : 2; INFO("Powering off unused CPUs\n"); /* CPU1 is in AP806 cluster-0, which always exists, so power it down */ if (plat_marvell_cpu_powerdown(CPU1) == -1) return -1; /* * CPU2-3 are in AP806 2nd cluster (cluster-1), * which doesn't exists in dual-core systems. * so need to check if we have dual-core (single cluster) * or quad-code (2 clusters) */ if (cluster_count == 2) { /* CPU2-3 are part of 2nd cluster */ if (plat_marvell_cpu_powerdown(CPU2) == -1) return -1; if (plat_marvell_cpu_powerdown(CPU3) == -1) return -1; } return 0; } /* * Power up CPU - part of Linux boot stage */ static int plat_marvell_cpu_powerup(u_register_t mpidr) { uint32_t reg_val; int cpu_id = MPIDR_CPU_GET(mpidr), cluster = MPIDR_CLUSTER_GET(mpidr); int exit_loop = REG_WR_VALIDATE_TIMEOUT; /* calculate absolute CPU ID */ cpu_id = cluster * PLAT_MARVELL_CLUSTER_CORE_COUNT + cpu_id; INFO("Powering on CPU%d\n", cpu_id); #ifdef MVEBU_SOC_AP807 /* Activate 2 power switch fingers */ reg_val = mmio_read_32(AP807_PWRC_LDO_CR0_REG); reg_val &= ~(AP807_PWRC_LDO_CR0_MASK); reg_val |= (AP807_PWRC_LDO_CR0_VAL << AP807_PWRC_LDO_CR0_OFFSET); mmio_write_32(AP807_PWRC_LDO_CR0_REG, reg_val); udelay(100); #endif /* 1. Switch CPU power ON */ reg_val = mmio_read_32(PWRC_CPUN_CR_REG(cpu_id)); reg_val |= 0x1 << PWRC_CPUN_CR_PWR_DN_RQ_OFFSET; mmio_write_32(PWRC_CPUN_CR_REG(cpu_id), reg_val); /* 2. Wait for CPU on, up to 100 uSec: */ udelay(100); /* 3. Assert power ready */ reg_val = mmio_read_32(PWRC_CPUN_CR_REG(cpu_id)); reg_val |= 0x1 << PWRC_CPUN_CR_LDO_BYPASS_RDY_OFFSET; mmio_write_32(PWRC_CPUN_CR_REG(cpu_id), reg_val); /* 4. Read & Validate power ready * used in order to generate 16 Host CPU cycles */ do { reg_val = mmio_read_32(PWRC_CPUN_CR_REG(cpu_id)); exit_loop--; } while (!(reg_val & (0x1 << PWRC_CPUN_CR_LDO_BYPASS_RDY_OFFSET)) && exit_loop > 0); if (exit_loop <= 0) goto cpu_poweron_error; /* 5. Isolation disable */ reg_val = mmio_read_32(PWRC_CPUN_CR_REG(cpu_id)); reg_val &= ~PWRC_CPUN_CR_ISO_ENABLE_MASK; mmio_write_32(PWRC_CPUN_CR_REG(cpu_id), reg_val); /* 6. Read and check Isolation enabled - verify bit set to 1 */ exit_loop = REG_WR_VALIDATE_TIMEOUT; do { reg_val = mmio_read_32(PWRC_CPUN_CR_REG(cpu_id)); exit_loop--; } while ((reg_val & (0x1 << PWRC_CPUN_CR_ISO_ENABLE_OFFSET)) && exit_loop > 0); /* 7. De Assert CPU POR reset & Core reset */ reg_val = mmio_read_32(CCU_B_PRCRN_REG(cpu_id)); reg_val |= 0x1 << CCU_B_PRCRN_CPUPORESET_STATIC_OFFSET; mmio_write_32(CCU_B_PRCRN_REG(cpu_id), reg_val); /* 8. Read & Validate CPU POR reset */ exit_loop = REG_WR_VALIDATE_TIMEOUT; do { reg_val = mmio_read_32(CCU_B_PRCRN_REG(cpu_id)); exit_loop--; } while (!(reg_val & (0x1 << CCU_B_PRCRN_CPUPORESET_STATIC_OFFSET)) && exit_loop > 0); if (exit_loop <= 0) goto cpu_poweron_error; INFO("Successfully powered on CPU%d\n", cpu_id); return 0; cpu_poweron_error: ERROR("ERROR: Can't power up CPU%d\n", cpu_id); return -1; } static int plat_marvell_cpu_on(u_register_t mpidr) { int cpu_id; int cluster; /* Set barierr */ dsbsy(); /* Get cpu number - use CPU ID */ cpu_id = MPIDR_CPU_GET(mpidr); /* Get cluster number - use affinity level 1 */ cluster = MPIDR_CLUSTER_GET(mpidr); /* Set CPU private UID */ mmio_write_32(MVEBU_REGS_BASE + MVEBU_PRIVATE_UID_REG, cluster + 0x4); /* Set the cpu start address to BL1 entry point (align to 0x10000) */ mmio_write_32(MVEBU_CCU_RVBAR(cpu_id), PLAT_MARVELL_CPU_ENTRY_ADDR >> 16); /* Get the cpu out of reset */ mmio_write_32(MVEBU_CCU_CPU_UN_RESET(cpu_id), 0x10001); return 0; } /***************************************************************************** * A8K handler called to check the validity of the power state * parameter. ***************************************************************************** */ static int a8k_validate_power_state(unsigned int power_state, psci_power_state_t *req_state) { int pstate = psci_get_pstate_type(power_state); int pwr_lvl = psci_get_pstate_pwrlvl(power_state); int i; if (pwr_lvl > PLAT_MAX_PWR_LVL) return PSCI_E_INVALID_PARAMS; /* Sanity check the requested state */ if (pstate == PSTATE_TYPE_STANDBY) { /* * It's possible to enter standby only on power level 0 * Ignore any other power level. */ if (pwr_lvl != MARVELL_PWR_LVL0) return PSCI_E_INVALID_PARAMS; req_state->pwr_domain_state[MARVELL_PWR_LVL0] = MARVELL_LOCAL_STATE_RET; } else { for (i = MARVELL_PWR_LVL0; i <= pwr_lvl; i++) req_state->pwr_domain_state[i] = MARVELL_LOCAL_STATE_OFF; } /* * We expect the 'state id' to be zero. */ if (psci_get_pstate_id(power_state)) return PSCI_E_INVALID_PARAMS; return PSCI_E_SUCCESS; } /***************************************************************************** * A8K handler called when a CPU is about to enter standby. ***************************************************************************** */ static void a8k_cpu_standby(plat_local_state_t cpu_state) { if (!is_pm_fw_running()) { ERROR("%s: needs to be implemented\n", __func__); panic(); } } /***************************************************************************** * A8K handler called when a power domain is about to be turned on. The * mpidr determines the CPU to be turned on. ***************************************************************************** */ static int a8k_pwr_domain_on(u_register_t mpidr) { /* Power up CPU (CPUs 1-3 are powered off at start of BLE) */ plat_marvell_cpu_powerup(mpidr); if (is_pm_fw_running()) { unsigned int target = ((mpidr & 0xFF) + (((mpidr >> 8) & 0xFF) * 2)); /* * pm system synchronization - used to synchronize * multiple core access to MSS */ bakery_lock_get(&pm_sys_lock); /* send CPU ON IPC Message to MSS */ mss_pm_ipc_msg_send(target, PM_IPC_MSG_CPU_ON, 0); /* trigger IPC message to MSS */ mss_pm_ipc_msg_trigger(); /* pm system synchronization */ bakery_lock_release(&pm_sys_lock); /* trace message */ PM_TRACE(TRACE_PWR_DOMAIN_ON | target); } else { /* proprietary CPU ON exection flow */ plat_marvell_cpu_on(mpidr); } return 0; } /***************************************************************************** * A8K handler called to validate the entry point. ***************************************************************************** */ static int a8k_validate_ns_entrypoint(uintptr_t entrypoint) { return PSCI_E_SUCCESS; } /***************************************************************************** * A8K handler called when a power domain is about to be turned off. The * target_state encodes the power state that each level should transition to. ***************************************************************************** */ static void a8k_pwr_domain_off(const psci_power_state_t *target_state) { if (is_pm_fw_running()) { unsigned int idx = plat_my_core_pos(); /* Prevent interrupts from spuriously waking up this cpu */ gicv2_cpuif_disable(); /* pm system synchronization - used to synchronize multiple * core access to MSS */ bakery_lock_get(&pm_sys_lock); /* send CPU OFF IPC Message to MSS */ mss_pm_ipc_msg_send(idx, PM_IPC_MSG_CPU_OFF, target_state); /* trigger IPC message to MSS */ mss_pm_ipc_msg_trigger(); /* pm system synchronization */ bakery_lock_release(&pm_sys_lock); /* trace message */ PM_TRACE(TRACE_PWR_DOMAIN_OFF); } else { INFO("%s: is not supported without SCP\n", __func__); } } /* Get PM config to power off the SoC */ void *plat_marvell_get_pm_cfg(void) { return NULL; } /* * This function should be called on restore from * "suspend to RAM" state when the execution flow * has to bypass BootROM image to RAM copy and speed up * the system recovery * */ static void plat_marvell_exit_bootrom(void) { marvell_exit_bootrom(PLAT_MARVELL_TRUSTED_ROM_BASE); } /* * Prepare for the power off of the system via GPIO */ static void plat_marvell_power_off_gpio(struct power_off_method *pm_cfg, register_t *gpio_addr, register_t *gpio_data) { unsigned int gpio; unsigned int idx; unsigned int shift; unsigned int reg; unsigned int addr; gpio_info_t *info; unsigned int tog_bits; assert((pm_cfg->cfg.gpio.pin_count < PMIC_GPIO_MAX_NUMBER) && (pm_cfg->cfg.gpio.step_count < PMIC_GPIO_MAX_TOGGLE_STEP)); /* Prepare GPIOs for PMIC */ for (gpio = 0; gpio < pm_cfg->cfg.gpio.pin_count; gpio++) { info = &pm_cfg->cfg.gpio.info[gpio]; /* Set PMIC GPIO to output mode */ reg = mmio_read_32(MVEBU_CP_GPIO_DATA_OUT_EN( info->cp_index, info->gpio_index)); mmio_write_32(MVEBU_CP_GPIO_DATA_OUT_EN( info->cp_index, info->gpio_index), reg & ~MVEBU_GPIO_MASK(info->gpio_index)); /* Set the appropriate MPP to GPIO mode */ reg = mmio_read_32(MVEBU_PM_MPP_REGS(info->cp_index, info->gpio_index)); mmio_write_32(MVEBU_PM_MPP_REGS(info->cp_index, info->gpio_index), reg & ~MVEBU_MPP_MASK(info->gpio_index)); } /* Wait for MPP & GPIO pre-configurations done */ mdelay(pm_cfg->cfg.gpio.delay_ms); /* Toggle the GPIO values, and leave final step to be triggered * after DDR self-refresh is enabled */ for (idx = 0; idx < pm_cfg->cfg.gpio.step_count; idx++) { tog_bits = pm_cfg->cfg.gpio.seq[idx]; /* The GPIOs must be within same GPIO register, * thus could get the original value by first GPIO */ info = &pm_cfg->cfg.gpio.info[0]; reg = mmio_read_32(MVEBU_CP_GPIO_DATA_OUT( info->cp_index, info->gpio_index)); addr = MVEBU_CP_GPIO_DATA_OUT(info->cp_index, info->gpio_index); for (gpio = 0; gpio < pm_cfg->cfg.gpio.pin_count; gpio++) { shift = pm_cfg->cfg.gpio.info[gpio].gpio_index % 32; if (GPIO_LOW == (tog_bits & (1 << gpio))) reg &= ~(1 << shift); else reg |= (1 << shift); } /* Set the GPIO register, for last step just store * register address and values to system registers */ if (idx < pm_cfg->cfg.gpio.step_count - 1) { mmio_write_32(MVEBU_CP_GPIO_DATA_OUT( info->cp_index, info->gpio_index), reg); mdelay(pm_cfg->cfg.gpio.delay_ms); } else { /* Save GPIO register and address values for * finishing the power down operation later */ *gpio_addr = addr; *gpio_data = reg; } } } /* * Prepare for the power off of the system */ static void plat_marvell_power_off_prepare(struct power_off_method *pm_cfg, register_t *addr, register_t *data) { switch (pm_cfg->type) { case PMIC_GPIO: plat_marvell_power_off_gpio(pm_cfg, addr, data); break; default: break; } } /***************************************************************************** * A8K handler called when a power domain is about to be suspended. The * target_state encodes the power state that each level should transition to. ***************************************************************************** */ static void a8k_pwr_domain_suspend(const psci_power_state_t *target_state) { if (is_pm_fw_running()) { unsigned int idx; /* Prevent interrupts from spuriously waking up this cpu */ gicv2_cpuif_disable(); idx = plat_my_core_pos(); /* pm system synchronization - used to synchronize multiple * core access to MSS */ bakery_lock_get(&pm_sys_lock); /* send CPU Suspend IPC Message to MSS */ mss_pm_ipc_msg_send(idx, PM_IPC_MSG_CPU_SUSPEND, target_state); /* trigger IPC message to MSS */ mss_pm_ipc_msg_trigger(); /* pm system synchronization */ bakery_lock_release(&pm_sys_lock); /* trace message */ PM_TRACE(TRACE_PWR_DOMAIN_SUSPEND); } else { uintptr_t *mailbox = (void *)PLAT_MARVELL_MAILBOX_BASE; INFO("Suspending to RAM\n"); /* Prevent interrupts from spuriously waking up this cpu */ gicv2_cpuif_disable(); mailbox[MBOX_IDX_SUSPEND_MAGIC] = MVEBU_MAILBOX_SUSPEND_STATE; mailbox[MBOX_IDX_ROM_EXIT_ADDR] = (uintptr_t)&plat_marvell_exit_bootrom; #if PLAT_MARVELL_SHARED_RAM_CACHED flush_dcache_range(PLAT_MARVELL_MAILBOX_BASE + MBOX_IDX_SUSPEND_MAGIC * sizeof(uintptr_t), 2 * sizeof(uintptr_t)); #endif /* Flush and disable LLC before going off-power */ llc_disable(0); isb(); /* * Do not halt here! * The function must return for allowing the caller function * psci_power_up_finish() to do the proper context saving and * to release the CPU lock. */ } } /***************************************************************************** * A8K handler called when a power domain has just been powered on after * being turned off earlier. The target_state encodes the low power state that * each level has woken up from. ***************************************************************************** */ static void a8k_pwr_domain_on_finish(const psci_power_state_t *target_state) { /* arch specific configuration */ marvell_psci_arch_init(0); /* Interrupt initialization */ gicv2_pcpu_distif_init(); gicv2_cpuif_enable(); if (is_pm_fw_running()) { /* trace message */ PM_TRACE(TRACE_PWR_DOMAIN_ON_FINISH); } } /***************************************************************************** * A8K handler called when a power domain has just been powered on after * having been suspended earlier. The target_state encodes the low power state * that each level has woken up from. * TODO: At the moment we reuse the on finisher and reinitialize the secure * context. Need to implement a separate suspend finisher. ***************************************************************************** */ static void a8k_pwr_domain_suspend_finish( const psci_power_state_t *target_state) { if (is_pm_fw_running()) { /* arch specific configuration */ marvell_psci_arch_init(0); /* Interrupt initialization */ gicv2_cpuif_enable(); /* trace message */ PM_TRACE(TRACE_PWR_DOMAIN_SUSPEND_FINISH); } else { uintptr_t *mailbox = (void *)PLAT_MARVELL_MAILBOX_BASE; /* Only primary CPU requres platform init */ if (!plat_my_core_pos()) { /* Initialize the console to provide * early debug support */ console_init(PLAT_MARVELL_BOOT_UART_BASE, PLAT_MARVELL_BOOT_UART_CLK_IN_HZ, MARVELL_CONSOLE_BAUDRATE); bl31_plat_arch_setup(); marvell_bl31_platform_setup(); /* * Remove suspend to RAM marker from the mailbox * for treating a regular reset as a cold boot */ mailbox[MBOX_IDX_SUSPEND_MAGIC] = 0; mailbox[MBOX_IDX_ROM_EXIT_ADDR] = 0; #if PLAT_MARVELL_SHARED_RAM_CACHED flush_dcache_range(PLAT_MARVELL_MAILBOX_BASE + MBOX_IDX_SUSPEND_MAGIC * sizeof(uintptr_t), 2 * sizeof(uintptr_t)); #endif } } } /***************************************************************************** * This handler is called by the PSCI implementation during the `SYSTEM_SUSPEND` * call to get the `power_state` parameter. This allows the platform to encode * the appropriate State-ID field within the `power_state` parameter which can * be utilized in `pwr_domain_suspend()` to suspend to system affinity level. ***************************************************************************** */ static void a8k_get_sys_suspend_power_state(psci_power_state_t *req_state) { /* lower affinities use PLAT_MAX_OFF_STATE */ for (int i = MPIDR_AFFLVL0; i <= PLAT_MAX_PWR_LVL; i++) req_state->pwr_domain_state[i] = PLAT_MAX_OFF_STATE; } static void __dead2 a8k_pwr_domain_pwr_down_wfi(const psci_power_state_t *target_state) { struct power_off_method *pm_cfg; unsigned int srcmd; unsigned int sdram_reg; register_t gpio_data = 0, gpio_addr = 0; if (is_pm_fw_running()) { psci_power_down_wfi(); panic(); } pm_cfg = (struct power_off_method *)plat_marvell_get_pm_cfg(); /* Prepare for power off */ plat_marvell_power_off_prepare(pm_cfg, &gpio_addr, &gpio_data); /* First step to enable DDR self-refresh * to keep the data during suspend */ mmio_write_32(MVEBU_MC_PWR_CTRL_REG, 0x8C1); /* Save DDR self-refresh second step register * and value to be issued later */ sdram_reg = MVEBU_USER_CMD_0_REG; srcmd = mmio_read_32(sdram_reg); srcmd &= ~(MVEBU_USER_CMD_CH0_MASK | MVEBU_USER_CMD_CS_MASK | MVEBU_USER_CMD_SR_MASK); srcmd |= (MVEBU_USER_CMD_CH0_EN | MVEBU_USER_CMD_CS_ALL | MVEBU_USER_CMD_SR_ENTER); /* * Wait for DRAM is done using registers access only. * At this stage any access to DRAM (procedure call) will * release it from the self-refresh mode */ __asm__ volatile ( /* Align to a cache line */ " .balign 64\n\t" /* Enter self refresh */ " str %[srcmd], [%[sdram_reg]]\n\t" /* * Wait 100 cycles for DDR to enter self refresh, by * doing 50 times two instructions. */ " mov x1, #50\n\t" "1: subs x1, x1, #1\n\t" " bne 1b\n\t" /* Issue the command to trigger the SoC power off */ " str %[gpio_data], [%[gpio_addr]]\n\t" /* Trap the processor */ " b .\n\t" : : [srcmd] "r" (srcmd), [sdram_reg] "r" (sdram_reg), [gpio_addr] "r" (gpio_addr), [gpio_data] "r" (gpio_data) : "x1"); panic(); } /***************************************************************************** * A8K handlers to shutdown/reboot the system ***************************************************************************** */ static void __dead2 a8k_system_off(void) { ERROR("%s: needs to be implemented\n", __func__); panic(); } void plat_marvell_system_reset(void) { mmio_write_32(MVEBU_RFU_BASE + MVEBU_RFU_GLOBL_SW_RST, 0x0); } static void __dead2 a8k_system_reset(void) { plat_marvell_system_reset(); /* we shouldn't get to this point */ panic(); } /***************************************************************************** * Export the platform handlers via plat_arm_psci_pm_ops. The ARM Standard * platform layer will take care of registering the handlers with PSCI. ***************************************************************************** */ const plat_psci_ops_t plat_arm_psci_pm_ops = { .cpu_standby = a8k_cpu_standby, .pwr_domain_on = a8k_pwr_domain_on, .pwr_domain_off = a8k_pwr_domain_off, .pwr_domain_suspend = a8k_pwr_domain_suspend, .pwr_domain_on_finish = a8k_pwr_domain_on_finish, .get_sys_suspend_power_state = a8k_get_sys_suspend_power_state, .pwr_domain_suspend_finish = a8k_pwr_domain_suspend_finish, .pwr_domain_pwr_down_wfi = a8k_pwr_domain_pwr_down_wfi, .system_off = a8k_system_off, .system_reset = a8k_system_reset, .validate_power_state = a8k_validate_power_state, .validate_ns_entrypoint = a8k_validate_ns_entrypoint };