/* * Copyright (c) 2014, ARM Limited and Contributors. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * Redistributions of source code must retain the above copyright notice, this * list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * * Neither the name of ARM nor the names of its contributors may be used * to endorse or promote products derived from this software without specific * prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #ifndef __JUNO_DEF_H__ #define __JUNO_DEF_H__ /* Special value used to verify platform parameters from BL2 to BL3-1 */ #define JUNO_BL31_PLAT_PARAM_VAL 0x0f1e2d3c4b5a6978ULL /******************************************************************************* * Juno memory map related constants ******************************************************************************/ #define MHU_SECURE_BASE 0x04000000 #define MHU_SECURE_SIZE 0x00001000 #define MHU_PAYLOAD_CACHED 0 #define TRUSTED_MAILBOXES_BASE MHU_SECURE_BASE #define TRUSTED_MAILBOX_SHIFT 4 #define EMMC_BASE 0x0c000000 #define EMMC_SIZE 0x04000000 #define PSRAM_BASE 0x14000000 #define PSRAM_SIZE 0x02000000 #define IOFPGA_BASE 0x1c000000 #define IOFPGA_SIZE 0x03000000 #define NSROM_BASE 0x1f000000 #define NSROM_SIZE 0x00001000 /* Following covers Columbus Peripherals excluding NSROM and NSRAM */ #define DEVICE0_BASE 0x20000000 #define DEVICE0_SIZE 0x0e000000 #define MHU_BASE 0x2b1f0000 #define NSRAM_BASE 0x2e000000 #define NSRAM_SIZE 0x00008000 /* Following covers Juno Peripherals and PCIe expansion area */ #define DEVICE1_BASE 0x40000000 #define DEVICE1_SIZE 0x40000000 #define PCIE_CONTROL_BASE 0x7ff20000 #define DRAM_BASE 0x80000000 #define DRAM_SIZE 0x80000000 /* Memory mapped Generic timer interfaces */ #define SYS_CNTCTL_BASE 0x2a430000 #define SYS_CNTREAD_BASE 0x2a800000 #define SYS_TIMCTL_BASE 0x2a810000 /* V2M motherboard system registers & offsets */ #define VE_SYSREGS_BASE 0x1c010000 #define V2M_SYS_LED 0x8 /* * V2M sysled bit definitions. The values written to this * register are defined in arch.h & runtime_svc.h. Only * used by the primary cpu to diagnose any cold boot issues. * * SYS_LED[0] - Security state (S=0/NS=1) * SYS_LED[2:1] - Exception Level (EL3-EL0) * SYS_LED[7:3] - Exception Class (Sync/Async & origin) * */ #define SYS_LED_SS_SHIFT 0x0 #define SYS_LED_EL_SHIFT 0x1 #define SYS_LED_EC_SHIFT 0x3 /******************************************************************************* * GIC-400 & interrupt handling related constants ******************************************************************************/ #define GICD_BASE 0x2c010000 #define GICC_BASE 0x2c02f000 #define GICH_BASE 0x2c04f000 #define GICV_BASE 0x2c06f000 #define IRQ_MHU 69 #define IRQ_GPU_SMMU_0 71 #define IRQ_GPU_SMMU_1 73 #define IRQ_ETR_SMMU 75 #define IRQ_TZC400 80 #define IRQ_TZ_WDOG 86 #define IRQ_SEC_PHY_TIMER 29 #define IRQ_SEC_SGI_0 8 #define IRQ_SEC_SGI_1 9 #define IRQ_SEC_SGI_2 10 #define IRQ_SEC_SGI_3 11 #define IRQ_SEC_SGI_4 12 #define IRQ_SEC_SGI_5 13 #define IRQ_SEC_SGI_6 14 #define IRQ_SEC_SGI_7 15 #define IRQ_SEC_SGI_8 16 /******************************************************************************* * PL011 related constants ******************************************************************************/ /* FPGA UART0 */ #define PL011_UART0_BASE 0x1c090000 /* FPGA UART1 */ #define PL011_UART1_BASE 0x1c0a0000 /* SoC UART0 */ #define PL011_UART2_BASE 0x7ff80000 /* SoC UART1 */ #define PL011_UART3_BASE 0x7ff70000 #define PL011_BAUDRATE 115200 #define PL011_UART0_CLK_IN_HZ 24000000 #define PL011_UART1_CLK_IN_HZ 24000000 #define PL011_UART2_CLK_IN_HZ 7273800 #define PL011_UART3_CLK_IN_HZ 7273800 /******************************************************************************* * NIC-400 related constants ******************************************************************************/ /* CSS NIC-400 Global Programmers View (GPV) */ #define CSS_NIC400_BASE 0x2a000000 /* The slave_bootsecure controls access to GPU, DMC and CS. */ #define CSS_NIC400_SLAVE_BOOTSECURE 8 /* SoC NIC-400 Global Programmers View (GPV) */ #define SOC_NIC400_BASE 0x7fd00000 #define SOC_NIC400_USB_EHCI 0 #define SOC_NIC400_TLX_MASTER 1 #define SOC_NIC400_USB_OHCI 2 #define SOC_NIC400_PL354_SMC 3 /* * The apb4_bridge controls access to: * - the PCIe configuration registers * - the MMU units for USB, HDLCD and DMA */ #define SOC_NIC400_APB4_BRIDGE 4 /* * The bootsec_bridge controls access to a bunch of peripherals, e.g. the UARTs. */ #define SOC_NIC400_BOOTSEC_BRIDGE 5 #define SOC_NIC400_BOOTSEC_BRIDGE_UART1 (1 << 12) /******************************************************************************* * TZC-400 related constants ******************************************************************************/ #define TZC400_BASE 0x2a4a0000 #define TZC400_NSAID_CCI400 0 /* Note: Same as default NSAID!! */ #define TZC400_NSAID_PCIE 1 #define TZC400_NSAID_HDLCD0 2 #define TZC400_NSAID_HDLCD1 3 #define TZC400_NSAID_USB 4 #define TZC400_NSAID_DMA330 5 #define TZC400_NSAID_THINLINKS 6 #define TZC400_NSAID_AP 9 #define TZC400_NSAID_GPU 10 #define TZC400_NSAID_SCP 11 #define TZC400_NSAID_CORESIGHT 12 /******************************************************************************* * CCI-400 related constants ******************************************************************************/ #define CCI400_BASE 0x2c090000 #define CCI400_SL_IFACE3_CLUSTER_IX 1 #define CCI400_SL_IFACE4_CLUSTER_IX 0 /******************************************************************************* * SCP <=> AP boot configuration ******************************************************************************/ #define SCP_BOOT_CFG_ADDR 0x04000080 #define PRIMARY_CPU_SHIFT 8 #define PRIMARY_CPU_MASK 0xf #endif /* __JUNO_DEF_H__ */